Running window manager

HI,
In order to run properly a window manager do I have to have installed a desktop for example KDE, Gnome, xfce or other?
Thanks.

No, most window managers run just fine without desktop environments (blackbox, fluxbox, enlightenment, afterstep, windowmaker are all good examples).

Similar Messages

Where can I download HP Recovery Manager for my TouchSmart 610--1150xt running WIndows 7 x64?

Many users would prefer a clean install of Windows with the option to install only those applications that they personally find useful. Currently, if performing a clean install of Windows -- even if creating recovery disks and maintaining the HP recovery partition -- it is not possible to access the Recovery Manager with the option to re-install only the drivers and any useful preinstalled software. The only options under these circumstances is to perform a system restore back to the factory state thus removing an separate clean installation of the operating system or reinstalling the limited number of drivers and applications available for the TouchSmart from HP Support.
If it were possible to reinstall the HP Recovery Manager software, it should also be possible to selectively re-install needed drivers and applications from the recovery partition using the "Software Program Reinstallation" and "Hardware Driver Reinstallation" options. These options are not available from the boot menu or reinstall disks.
I have found downloads for the Recovery Manager software specific for Windows Vista and for certain specific HP laptops running WIndows 7, but I have been unable to locate a similar download for the TouchSmart 610 AIO. Has anyone located a download of the HP Recovery Manager software applicable for the TouchSmart 610?

This procedure uses the original factory installed HP OEM Windows product key and HP OEM certificate and requires the HP BIOS to have SLP/SLIC v2.1. This procedure will install a completely clean Windows 7 installation and may require the installation of HP drivers. Some HP drivers and/or HP software needed by your computer may not install because the OS is no longer branded as "HP". Please create your personal HP Recovery Disc set before continuing with these instructions. Back-up all of your personal data and files before proceeding with this process.
1) Download and unzip ABR Beta for Windows 7. Here is the main page to ABR for Windows Vista. Please follow the "How to use it" section for information and instructions on how to use it. These steps apply to Windows 7 as well. Perform the "activation backup" on your original hard drive with the factory HP OEM Windows installation, saving the backup files in several locations (USB stick, SD card, external drive, etc.).
2) Download your version (the version that was preinstalled on your HP computer) of Windows 7 from Official Windows 7 SP1 ISO from Digital River. Using the built-in Windows 7 CD/DVD burning software, burn the downloaded Windows 7 ISO image to a DVD.
3) Install Windows 7 from your new "Windows 7 disc" to your SSD, following all prompts as needed. Don't enter a Windows product key and don't allow Windows to try to auto-activate. After the Windows installation is complete, run ABR "activation restore" to "install" the previously backed up product key and certificate. Verify that Windows is activated, if not activated... repeat "activation restore" until Windows 7 is activated.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I, personally, have used the above procedure with great success on many HP desktops and laptops. I can't comment on how well it works with HP TouchSmart computers as I haven't had one to experiment on until recently.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

[SOLVED!] KDE 4.11 - Window Manager seems not to be running?

Greetings,
I still seem unable to fix the fact that systemsettings will run. However it will run if you do kdesu systemsettings.
Doing so I started checking around in it and thought I'd look at the desktop effects, when I was greeted with this:
So, I am guessing that the window borders and buttons are a figment of my imagination....
This is after me pretty much starting over with KDE, removing the .kde and .kde4 folders.
Help?
Edit: That pic seems to not link right. Yay. Basically it says that effects can not be activated or whatever because a window manager seems not to be running. The irony of it is you can see the fact that there are window borders and buttons and such, evidence of a WM...
I wonder if there is something here that is related to me not being able to run systemsettings... yet systemsettings will run fine in any other environment - including Gnome Shell.
Another thing, KDE 4.11 ran great in testing and kde_unstable. Once it went to extra, things happened. I find that odd. Maybe something is missing on my end that most archers already have?
Edit2: fixed image link
Last edited by mythus (2013-08-25 20:49:38)

No omeringen, Nvidia user.
I can try again Thaodan since I've had some updates come through (and weeded out some dot files). Last time I tried I saw OpenGL 2 selected. Trying to change to 3 or anything else also got the screenshot in my OP.
I'll log into KDE and see if it still does the same, after a brief check for last minute updates.
EDIT: OK, so I can mark this as solved. I found an odd dot file, who's name excapes me but deals with kde sessions, just sitting around in the home folder. Once I deleted it and restarted, I found that not only System Settings finally ran again as a user, but I could also change and apply desktop effects. Peculiar. I thought that maybe it was a dot file that was causing the problem, that wasn't in the .kde or .kde4 folder. It just took finding it and removing it.
I wish I knew more to tell, but this at least solves my issue, and the issue with the non-running-as-user system settings I had posted in another thread (thinking that they were separate events. Thanks again for all your help guys!
Last edited by mythus (2013-08-25 20:49:05)

Desktop Window Manager Service on Windows 7 Starter - Any Reason to Leave It Running?

Hello everyone,
-As per title, I'd like to know whether is it better to turn off Desktop Window Manager Session Manager (UxSms) service on Windows 7 Starter - or not. I mean changing the service's default startup type from Automatic to Manual (or Disabled).
-In Windows 7 Starter, the Aero theme and desktop composition are not available at all (not even a basic/partial one), so letting Desktop Window Manager (DWM.exe) to continuously run is useless as it does absolutely nothing. Is my deduction correct?
-All opinions and suggestions are welcomed, thank you very much.
Regards,
-Musafir_86.

Please read the information posted @
http://msdn.microsoft.com/en-us/library/windows/desktop/aa969540%28v=vs.85%29.aspx
Desktop Window Manager
The desktop composition feature, introduced in Windows Vista, fundamentally changed the way applications display pixels on the screen. When desktop composition is enabled, individual windows no longer draw directly to the screen or primary display
device as they did in previous versions of Windows. Instead, their drawing is redirected to off-screen surfaces in video memory, which are then rendered into a desktop image and presented on the display.
Desktop composition is performed by the Desktop Window Manager (DWM). Through desktop composition, DWM enables visual effects on the desktop
as well as various features such as glass window frames, 3-D window transition animations, Windows Flip and Windows Flip3D, and high resolution support.
The Desktop Window Manager runs as a Windows service. It can be enabled and disabled through the Administrative Tools Control Panel item, under Services, as Desktop Window Manager Session Manager.
Many of the DWM features can be controlled or accessed by an application through the DWM APIs. The following documentation describes the features and requirements of the DWM APIs.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Firefox will not open,tried running profile manager but I receive a small window with the word :dialog" in it.

Firefox will not open.Tried uninstalling and reinstalling program without any success.
Tried running profile manager,but a small screen shows up with the word "dialod" in it.
Any assistance appreciated.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB0.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; Tablet PC 2.0)

Can you provide us a screenshot?
Vista/7
Go to Start and type in Snipping Tool then provide a screenshot ,save it, and upload it to any of these file uploading websites.
[http://www.imageshack.us ImageShack]
[www.mediafire.com MediaFire]
[www.kimag.es Kimages]
XP
Press '''FN + PRT SC''' on your keyboard to take a screenshot and Press '''CTRL + V''' in Paint to paste it and save it and upload it.

Problem with running contract manager under WLS as windows service

I am having a problem running Contract Manager V13 as a windows service. I am using weblogic 10gR3 app server running under Windows 2008 sp2 (32 bit). The system functions just fine if run as an application from the command line. When I use the Oracle install contract manager as admin server (using jrockit) script from Oracle support, the service installs OK, but when starting I get:
+"The contract-mgr-svc-jrockit service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."+
Has anyone run into this problem of windows services not working? If so how did you fix it?
How are others starting contract manager automatically under Weblogic server, without having to do a manual startup?
I am dealing with this disclaimer from Oracle:
Disclaimer: Contract Management has not been officially tested with WebLogic as a Windows service. If experiencing a problem under this configuration that cannot be reproduced, while running as an application, the solution be to run Contract Management as an application.
and have been working with Oracle support for 2-3 weeks now on this problem without any luck.
Is the situation with using Windows services better if I use JBoss application server? Does Oracle officially support Windows service running with JBoss?
Thanks in advance...

What account is the service running under? It may be that the service does not have access to the folders it needs, or does not have the right java CLASSPATH set.
Can you try running the service under the exact same account that successfully runs via the command line?
Cheers,
Daniel

I have a new hp tower running windows 8.1 and have been trying to install the adobe reader. The installer downloads (1meg) and I choose to run it but it just sits with an empty screen. I've checked task manager and it takes up memory but does nothing.

I have a new hp tower running windows 8.1 and have been trying to install the adobe reader. The installer downloads (1meg) and I choose to run it but it just sits with an empty screen. I've checked task manager and it takes up memory but does nothing. After letting it run for 3-4 minutes I kill the task. What can I do to get the reader installed on this machine? I've tried using chrome, firefox and explorer and get the same results with each.

Try the offline installer from http://get.adobe.com/reader/enterprise/

Window manager crashes when I run the program I'm making.

Hello, I'm making a program which uses OpenGL, Python and Cocoa with PyObjC. I've made an additional part to my program which uses the same graphical code as everything else. When using it, the window manager crashes. It happens at two places. At one place, the fps drops rapidly before the crash happens. The other place has no fps drop noticeable; it simply crashes.
I have no idea how to debug this because all I have is an error report.
Can anyone make sense of the error report? (Same on each occasion)
Thank you.
Process: WindowServer [58]
Path: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/WindowServer
Identifier: WindowServer
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [1]
Date/Time: 2010-08-05 16:22:48.418 +0100
OS Version: Mac OS X 10.6.4 (10F569)
Report Version: 6
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 com.apple.GeForceGLDriver 0x00000002000119a4 gldAttachDrawable + 2388
1 com.apple.GeForceGLDriver 0x00000002000ce0c5 gldUpdateDispatch + 14581
2 com.apple.GeForceGLDriver 0x00000002000ce1b6 gldUpdateDispatch + 14822
3 GLEngine 0x000000011291f146 glFlush_Exec + 133
4 com.apple.CoreGraphics 0x00007fff802bc177 CGXGLAccelFinish + 154
5 com.apple.CoreGraphics 0x00007fff802bb2e0 CGXReleaseDisplayDeviceSurface + 232
6 com.apple.CoreGraphics 0x00007fff80292044 CGXUpdateDisplay + 7218
7 com.apple.CoreGraphics 0x00007fff8028ad70 _CGXRunTimerPass + 344
8 com.apple.CoreGraphics 0x00007fff802a1c37 CGXRunOneServicesPass + 138
9 com.apple.CoreGraphics 0x00007fff802aad4a CGXServerLoop + 139
10 com.apple.CoreGraphics 0x00007fff80275856 CGXGetRootAdminCredentials + 0
11 WindowServer 0x0000000100000f29 main + 9
12 WindowServer 0x0000000100000f18 start + 52
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x00007fff88c7408a kevent + 10
1 libSystem.B.dylib 0x00007fff88c75f5d dispatch_mgrinvoke + 154
2 libSystem.B.dylib 0x00007fff88c75c34 dispatch_queueinvoke + 185
3 libSystem.B.dylib 0x00007fff88c7575e dispatch_workerthread2 + 252
4 libSystem.B.dylib 0x00007fff88c75088 pthreadwqthread + 353
5 libSystem.B.dylib 0x00007fff88c74f25 start_wqthread + 13
Thread 2:
0 libSystem.B.dylib 0x00007fff88c5b2fa machmsgtrap + 10
1 libSystem.B.dylib 0x00007fff88c5b96d mach_msg + 59
2 com.apple.CoreFoundation 0x00007fff846173c2 __CFRunLoopRun + 1698
3 com.apple.CoreFoundation 0x00007fff8461684f CFRunLoopRunSpecific + 575
4 com.apple.CoreFoundation 0x00007fff846165d6 CFRunLoopRun + 70
5 com.apple.CoreGraphics 0x00007fff8028773e eventThread + 470
6 libSystem.B.dylib 0x00007fff88c94456 pthreadstart + 331
7 libSystem.B.dylib 0x00007fff88c94309 thread_start + 13
Thread 3:
0 libSystem.B.dylib 0x00007fff88c5b2fa machmsgtrap + 10
1 libSystem.B.dylib 0x00007fff88c5b96d mach_msg + 59
2 com.apple.QuartzCore 0x00007fff8317abe2 CA::Render::Server::server_thread(void*) + 177
3 com.apple.QuartzCore 0x00007fff8317ab22 thread_fun + 34
4 libSystem.B.dylib 0x00007fff88c94456 pthreadstart + 331
5 libSystem.B.dylib 0x00007fff88c94309 thread_start + 13
Thread 4:
0 libSystem.B.dylib 0x00007fff88c95eb6 _semwaitsignal + 10
1 libSystem.B.dylib 0x00007fff88c99cd1 pthread_condwait + 1286
2 com.apple.CoreGraphics 0x00007fff8036082a layerblit_work_queuethread + 714
3 com.apple.CoreGraphics 0x00007fff80360a9c layerblit_work_queueserver + 156
4 libSystem.B.dylib 0x00007fff88c94456 pthreadstart + 331
5 libSystem.B.dylib 0x00007fff88c94309 thread_start + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x00000000e00002c2 rbx: 0x0000000112f65000 rcx: 0x00007fff88c5b2fa rdx: 0x0000000012fa8000
rdi: 0x00007fff5fbfd800 rsi: 0x00007fff711475c0 rbp: 0x00007fff5fbfe990 rsp: 0x00007fff5fbfe990
r8: 0x0000000000000e03 r9: 0x0000000000000000 r10: 0x00000000000010bc r11: 0x0000000000000206
r12: 0x0000000112fa8000 r13: 0x0000000000000003 r14: 0x00007fff5fbfe9c0 r15: 0x0000000100106030
rip: 0x00000002000119a4 rfl: 0x0000000000010246 cr2: 0x0000000000000000
Binary Images:
0x100000000 - 0x100000fff WindowServer ??? (???) <339853D7-1BCB-51F6-24DA-7615FFB3DDEB> /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphic s.framework/Resources/WindowServer
0x100683000 - 0x100697fff com.apple.GeForceGA 1.6.16 (6.1.6) <5D2C7F65-FF94-5808-AFFB-18DC4BED0C58> /System/Library/Extensions/GeForceGA.plugin/Contents/MacOS/GeForceGA
0x112900000 - 0x112a8dfe7 GLEngine ??? (???) <57D733C2-F7CB-2B8F-CD34-C85A193145DE> /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
0x112abe000 - 0x112ee1fef libclh.dylib 3.1.1 C (3.1.1) <83F3C7DB-D2E2-07B0-E433-386C9428AD72> /System/Library/Extensions/GeForceGLDriver.bundle/Contents/MacOS/libclh.dylib
0x200000000 - 0x2006fbff7 com.apple.GeForceGLDriver 1.6.16 (6.1.6) <4F3D3917-641B-AA12-04DE-D3A1995C3B18> /System/Library/Extensions/GeForceGLDriver.bundle/Contents/MacOS/GeForceGLDrive r
0x7fff5fc00000 - 0x7fff5fc3bdef dyld 132.1 (???) <B536F2F1-9DF1-3B6C-1C2C-9075EA219A06> /usr/lib/dyld
0x7fff80003000 - 0x7fff80005fff libRadiance.dylib ??? (???) <D67C08B6-4D4A-916D-E936-528E145A56E2> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x7fff80006000 - 0x7fff80096fff com.apple.SearchKit 1.3.0 (1.3.0) <4175DC31-1506-228A-08FD-C704AC9DF642> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x7fff800d6000 - 0x7fff8011eff7 libvDSP.dylib 268.0.1 (compatibility 1.0.0) <170DE04F-89AB-E295-0880-D69CAFBD7979> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x7fff801ba000 - 0x7fff808b7067 com.apple.CoreGraphics 1.543.50 (???) <46A7D60C-0500-B96C-ECAD-1D658487D213> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x7fff80c60000 - 0x7fff80d30ff7 com.apple.CFNetwork 454.9.7 (454.9.7) <AA6EB690-6CCF-603D-AAC2-35B9E05D1593> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x7fff80d31000 - 0x7fff80d45ff7 com.apple.speech.synthesis.framework 3.10.35 (3.10.35) <621B7415-A0B9-07A7-F313-36BEEDD7B132> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x7fff80d46000 - 0x7fff80d4cff7 com.apple.DiskArbitration 2.3 (2.3) <857F6E43-1EF4-7D53-351B-10DE0A8F992A> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff81307000 - 0x7fff81356fef libTIFF.dylib ??? (???) <A66CBA9C-A38D-5EDB-BFB5-CB398F033D6F> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x7fff81412000 - 0x7fff8143dff7 libxslt.1.dylib 3.24.0 (compatibility 3.0.0) <87A0B228-B24A-C426-C3FB-B40D7258DD49> /usr/lib/libxslt.1.dylib
0x7fff816ea000 - 0x7fff816fbff7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <FB5EE53A-0534-0FFA-B2ED-486609433717> /usr/lib/libz.1.dylib
0x7fff816fc000 - 0x7fff816fcff7 com.apple.CoreServices 44 (44) <210A4C56-BECB-E3E4-B6EE-7EC53E02265D> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff8189e000 - 0x7fff8189fff7 com.apple.TrustEvaluationAgent 1.1 (1) <51867586-1C71-AE37-EAAD-535A58DD3550> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
0x7fff818a3000 - 0x7fff818b7fff libGL.dylib ??? (???) <5AD69545-D1A3-C017-C7AF-B4AFD6F08FA2> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x7fff818b8000 - 0x7fff81a6efef com.apple.ImageIO.framework 3.0.3 (3.0.3) <A32D0B5A-7149-7739-22D3-84D38B07E9E5> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x7fff81c95000 - 0x7fff81c9bff7 IOSurface ??? (???) <EB2019F6-7C5C-3D59-E11F-6119466C12A9> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
0x7fff81ce0000 - 0x7fff82013fe7 com.apple.CoreServices.CarbonCore 861.13 (861.13) <BC2F9B4E-D305-D717-D97E-EC78C7DE9EE9> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff82014000 - 0x7fff82091fef libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <35ECA411-2C08-FD7D-11B1-1B7A04921A5C> /usr/lib/libstdc++.6.dylib
0x7fff82092000 - 0x7fff82097fff libGFXShared.dylib ??? (???) <1265FAEF-1C97-B339-28A4-4510589B067B> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
0x7fff82a87000 - 0x7fff82a9dfef libbsm.0.dylib ??? (???) <42D3023A-A1F7-4121-6417-FCC6B51B3E90> /usr/lib/libbsm.0.dylib
0x7fff82ac5000 - 0x7fff82c83fff libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <0E53A4A6-AC06-1B61-2285-248F534EE356> /usr/lib/libicucore.A.dylib
0x7fff82ea3000 - 0x7fff82ea3ff7 com.apple.Accelerate 1.6 (Accelerate 1.6) <2BB7D669-4B40-6A52-ADBD-DA4DB3BC0B1B> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x7fff82ec5000 - 0x7fff82ec5ff7 com.apple.ApplicationServices 38 (38) <10A0B9E9-4988-03D4-FC56-DDE231A02C63> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x7fff83060000 - 0x7fff83120fff libFontParser.dylib ??? (???) <A4F8189D-1D5B-2F8D-E78E-6D934A8E8407> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
0x7fff83121000 - 0x7fff83125ff7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <95718673-FEEE-B6ED-B127-BCDBDB60D4E5> /usr/lib/system/libmathCommon.A.dylib
0x7fff83128000 - 0x7fff834c1ff7 com.apple.QuartzCore 1.6.2 (227.22) <76EE0A32-B20B-F316-ADDD-4230329253D5> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x7fff83612000 - 0x7fff8361ffe7 libCSync.A.dylib 543.50.0 (compatibility 64.0.0) <7B891D4C-1F19-4DB0-FD12-7A7D5E8F47AE> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x7fff836a4000 - 0x7fff836cafe7 libJPEG.dylib ??? (???) <4060F3E2-BAD3-244F-D777-51BA16569DA4> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x7fff836cb000 - 0x7fff837e2fef libxml2.2.dylib 10.3.0 (compatibility 10.0.0) <EE067D7E-15B3-F043-6FBD-10BA31FE76C7> /usr/lib/libxml2.2.dylib
0x7fff83851000 - 0x7fff83860fff com.apple.NetFS 3.2.1 (3.2.1) <FF21DB1E-F425-1005-FB70-BC19CAF4006E> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x7fff83ae2000 - 0x7fff83b40ff7 com.apple.framework.IOKit 2.0 (???) <010C3398-7363-8F4B-719C-263867F15F63> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff83bb5000 - 0x7fff83c8fff7 com.apple.vImage 4.0 (4.0) <354F34BF-B221-A3C9-2CA7-9BE5E14AD5AD> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x7fff83e01000 - 0x7fff83e52fe7 com.apple.HIServices 1.8.0 (???) <1ABA7802-C1E4-06A0-9035-2792CC915BF6> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x7fff83e53000 - 0x7fff83e61ff7 libkxld.dylib ??? (???) <EE840168-1F67-6219-8BA3-C46039BCC8B3> /usr/lib/system/libkxld.dylib
0x7fff83e6f000 - 0x7fff83eb9ff7 com.apple.Metadata 10.6.3 (507.10) <641395B7-FF2C-B94C-965A-CE6A0830645F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x7fff8403a000 - 0x7fff840bffff com.apple.print.framework.PrintCore 6.2 (312.5) <E736F6DC-2E69-A14D-6BCF-69D14232F8B8> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x7fff840dc000 - 0x7fff84195fff libsqlite3.dylib 9.6.0 (compatibility 9.0.0) <5A15E12A-AE8F-1A36-BBC7-564E7D7AD0FB> /usr/lib/libsqlite3.dylib
0x7fff841d9000 - 0x7fff84273fff com.apple.ApplicationServices.ATS 4.3 (???) <A7CD9E1F-C563-E940-130D-AA7E08C5A29F> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x7fff84274000 - 0x7fff84289ff7 com.apple.LangAnalysis 1.6.6 (1.6.6) <DC999B32-BF41-94C8-0583-27D9AB463E8B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x7fff845cb000 - 0x7fff84740ff7 com.apple.CoreFoundation 6.6.3 (550.29) <48810602-63C3-994D-E563-DD02B16E76E1> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff84741000 - 0x7fff84762fff libresolv.9.dylib 41.0.0 (compatibility 1.0.0) <6993F348-428F-C97E-7A84-7BD2EDC46A62> /usr/lib/libresolv.9.dylib
0x7fff84763000 - 0x7fff84818fe7 com.apple.ColorSync 4.6.3 (4.6.3) <AA93AD96-6974-9104-BF55-AF7A813C8A1B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x7fff84819000 - 0x7fff848d6ff7 com.apple.CoreServices.OSServices 357 (357) <718F0719-DC9F-E392-7C64-9D7DFE3D02E2> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff848d7000 - 0x7fff84977fff com.apple.LaunchServices 362.1 (362.1) <2740103A-6C71-D99F-8C6F-FA264546AD8F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x7fff84978000 - 0x7fff849b0fef libcups.2.dylib 2.8.0 (compatibility 2.0.0) <31A78904-A500-0DA9-0609-F1EB81383326> /usr/lib/libcups.2.dylib
0x7fff84a39000 - 0x7fff84a3efff libGIF.dylib ??? (???) <21FC6B02-6AC3-C4DB-0B50-98144802274C> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x7fff84b1b000 - 0x7fff84f5efef libLAPACK.dylib 219.0.0 (compatibility 1.0.0) <0CC61C98-FF51-67B3-F3D8-C5E430C201A9> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x7fff84f5f000 - 0x7fff84f82fff com.apple.opencl 12.1 (12.1) <403E8F37-4348-B9BC-08E6-7693A995B7EC> /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL
0x7fff84f83000 - 0x7fff84fa8fe7 com.apple.CoreVideo 1.6.1 (45.4) <B1516554-88BC-CF1E-5409-BFF27A73D1AF> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x7fff8532f000 - 0x7fff8533eff7 com.apple.opengl 1.6.8 (1.6.8) <0CDC4F98-7981-A114-1778-AF171075138E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x7fff85364000 - 0x7fff85382fff libPng.dylib ??? (???) <F6932C8D-E6B1-0871-B698-15180AA948F7> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x7fff855a6000 - 0x7fff85827fef com.apple.Foundation 6.6.3 (751.29) <DAEDB589-9F59-9556-CF8D-07556317937B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff8587b000 - 0x7fff858a3fff com.apple.DictionaryServices 1.1.1 (1.1.1) <9FD709FC-23F0-F270-EAC1-C590CD516A36> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x7fff8594d000 - 0x7fff85a5cfe7 libcrypto.0.9.8.dylib 0.9.8 (compatibility 0.9.8) <36DA89A6-3AF5-86F2-BDD5-B94C7C0844D4> /usr/lib/libcrypto.0.9.8.dylib
0x7fff86770000 - 0x7fff869f6ff7 com.apple.security 6.1.1 (37594) <5EDDC08C-C95B-2D24-E1D2-D30D233AB065> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff87514000 - 0x7fff8754ffff com.apple.AE 496.4 (496.4) <CBEDB6A1-FD85-F842-4EB8-CC289FAE0F24> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff87558000 - 0x7fff8755bff7 libCoreVMClient.dylib ??? (???) <DBB2C09F-4BF4-326C-B775-B7A128C501E3> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
0x7fff87774000 - 0x7fff877bdfef libGLU.dylib ??? (???) <34D118CD-F9EE-D023-FEBF-74581DEF31CD> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x7fff87d7f000 - 0x7fff87e2efff edu.mit.Kerberos 6.5.10 (6.5.10) <F3F76EDF-5660-78F0-FE6E-33B6174F55A4> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x7fff87e2f000 - 0x7fff87e70fff com.apple.SystemConfiguration 1.10.2 (1.10.2) <BC27BDD4-9CC8-9AF0-B4C2-DD50FD751CBF> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff87fef000 - 0x7fff87ff5fff libCGXCoreImage.A.dylib 543.50.0 (compatibility 64.0.0) <2D72D55A-C8FE-78DD-602E-E934057EDF95> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXCoreImage.A.dylib
0x7fff88208000 - 0x7fff88a12fe7 libBLAS.dylib 219.0.0 (compatibility 1.0.0) <FC941ECB-71D0-FAE3-DCBF-C5A619E594B8> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x7fff88a13000 - 0x7fff88b2cfef libGLProgrammability.dylib ??? (???) <B057FC52-6A97-F450-48D8-325A70423A53> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x7fff88b68000 - 0x7fff88c1efff libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <F206BE6D-8777-AE6C-B367-7BEA76C14241> /usr/lib/libobjc.A.dylib
0x7fff88c59000 - 0x7fff88c59ff7 com.apple.Accelerate.vecLib 3.6 (vecLib 3.6) <DA9BFF01-40DF-EBD5-ABB7-787DAF2D77CF> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x7fff88c5a000 - 0x7fff88e1afef libSystem.B.dylib 125.2.0 (compatibility 1.0.0) <95E02DD0-ADEA-745B-E7FA-ABA064E4658C> /usr/lib/libSystem.B.dylib
0x7fff88e1b000 - 0x7fff88e85fe7 libvMisc.dylib 268.0.1 (compatibility 1.0.0) <75A8D840-4ACE-6560-0889-2AFB6BE08E59> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x7fff88eaa000 - 0x7fff88ef6fff libauto.dylib ??? (???) <072804DF-36AD-2DBE-7EF8-639CFB79077F> /usr/lib/libauto.dylib
0x7fff88ef7000 - 0x7fff88f38fef com.apple.QD 3.35 (???) <78C9A560-E6F7-DC4F-F85E-E63CF8A98F0B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x7fff88fb6000 - 0x7fff88fe7fff libGLImage.dylib ??? (???) <2F18DB77-CF77-1311-9E20-FE460090C166> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x7fff88fe8000 - 0x7fff89066fff com.apple.CoreText 3.1.0 (???) <B740DA1D-EFD0-CCBF-F893-E3004FE58A98> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x7fffffe00000 - 0x7fffffe01fff libSystem.B.dylib ??? (???) <95E02DD0-ADEA-745B-E7FA-ABA064E4658C> /usr/lib/libSystem.B.dylib

''christ1 [[#answer-684469|said]]''
<blockquote>
Reboot your computer.
When it's back up again run the installer with administrator permissions.
</blockquote>
Thank you christ1. That worked. I did try running it with administrator, but I hadn't rebooted and it didn't work. It did work after I rebooted. I don't know why that should have mattered, but there you go. Thank you again.

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.

Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Maximize Application without Window Manager

What I'd like to do is use xwininfo and wmctrl to maximize an application in X without a window manager. Here is what I've worked out:
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
MAXIMIZE_ID=$(xwininfo -root -child | grep "st-256color" | grep -o "^[[:space:]]*0x[[:alnum:]]*" | grep -o "0x[[:alnum:]]*")
MAXIMIZE_WIDTH=$(xwininfo -root | grep "Width" | grep -o "[[:digit:]]*")
MAXIMIZE_HEIGHT=$(xwininfo -root | grep "Height" | grep -o "[[:digit:]]*")
while [ "$MAXIMIZE_ID" = "" ]
do
MAXIMIZE_ID=$(xwininfo -root -child | grep "st-256color" | grep -o "^[[:space:]]*0x[[:alnum:]]*" | grep -o "0x[[:alnum:]]*")
if [ "$MAXIMIZE_ID" != "" ]
then
wmctrl -i -r $MAXIMIZE_ID -e 0,0,0,$MAXIMIZE_WIDTH,$MAXIMIZE_HEIGHT
fi
done &
exec st
As intended it maximizes the st terminal. However, the terminal simply hangs there, I can provide it with no input, any clues as to what I'm missing and/or doing incorrectly? I realize st uses the geometry parameter, I'm only using it here as an example application as not all applications support that parameter.
Last edited by grimpirate (2014-08-12 19:20:00)

It's much more complex than that. Wmctrl requires a EWMH compliant window manager. Many of the lightest weight WMs are not EWMH compliant.
Is this just for st, or do you want all windows maximized? Does st have a 'geometry' flag?
You could write a WM that does nothing but fullscreen every window that is mapped in about a dozen lines of code. Note, however, that without a WM, windows will generally not properly be assigned the input focus - one result is that cursors on most terminals will remain 'hollow'. For the cost of one or two more lines of code, this new WM could also set input focus appropriately.
EDIT: st does have a geometry flag, just use that.
Also, your 'grep | grep' pipe could just be "awk '/Width/ { print $2;}'", or two get both width and height in one go:
xwininfo -root | awk '/Width/ { printf "%s", $2;} /Height/ {printf "x%s", $2;}'
Though this wouldn't be quite right for a st geometry string as that takes rows and columns, not pixels.
EDIT2: your solution will also fail miserably for two other reasons. There is not point in initializing the MAXIMIZEID variable before the loop starts - because if there actually are any windows there, the while loop will never run. Also, without a sleep command, or something, all that while loop will be very good for will be to turn your cpu into a frying pan (100% cpu use -> heat).
Here's a very plain WM that will do the same thing without melting your CPU:
#include <X11/Xlib.h>
int main(void) {
Display *dpy;
if(!(dpy = XOpenDisplay(0x0))) return 1;
XEvent ev;
int scr = DefaultScreen(dpy);
int sw = DisplayWidth(dpy, scr);
int sh = DisplayHeight(dpy, scr);
Window w, root = RootWindow(dpy, scr);
XSelectInput(dpy, root, SubstructureRedirectMask);
while (!XNextEvent(dpy, &ev)) {
if (ev.type == MapRequest && (w=ev.xmaprequest.window)) {
XMoveResizeWindow(dpy, w, 0, 0, sw, sh);
XMapWindow(dpy, w);
XSetInputFocus(dpy, w, RevertToPointerRoot, CurrentTime);
XFlush(dpy);
return 0;
Last edited by Trilby (2014-08-13 13:03:59)

Blackberry 9900 will not connect with Blackberry Desktop (v 6 or v7). I am running Windows 7.

I am running Windows 7, and have a Blackberry Bold 9900. This has some music on but most importantly my work diary and contacts which I synchronise through Desktop. I also use it as an external modem and tether my PC through it if I’m somewhere with no wireless.
Yesterday, I did these things during the afternoon:
·         Connected a Bluetooth device to my PC (headphones)
·         Needed to load a series of drivers for Windows for this to work
·         Upgraded from Blackberry Desktop 6 to 7 (following prompt when connected)
·         Set up a Bluetooth connection between my Blackberry and PC.
The next time I connected:
·         On The Blackberry smartphone I got the normal Blackberry is plugged in message, with normal options (USB Drive / Sync Media / Charge Only), and software opened as usual
·         But I was prompted to Connect Your Blackberry Device (with link to troubleshoot connection). Clicking this, I was taken to a page which suggested I check the cable etc. (which I did, all OK) and “...turn off synchronization applications or antivirus applications temporarily”. I disabled Avast, which made no difference, and I don’t know what a “synchronization application” is
·         Other aspects of the connection are working (i.e. I can still download photographs from the Blackberry, and still see it as the ‘F:’ drive)
I therefore conclude that:
·         Cable / physical connection is good (also tried a different cable - no change)
·         Something I had changed had corrupted things, so:
·         Uninstalled Blackberry Desktop v7 and replaced with the version I had been using successfully until yesterday (v6)
·         Removed the Bluetooth connection to my Blackberry.
Made no difference, so checked Blackberry help forums, which confused me more. One thing which I did discover, was that in Device Manager, although Blackberry is visible attached to PC (and says it is working correctly), it DOES NOT appear in the list of Network Adapters (I don’t know if it did before, but one answer in the tech forum suggested this is significant – though not sure why or what to do about it)
Any help would be very welcome – been at this for ten hours now and making no progress!
Many thanks
Clive

This worked for me after several hours on the phone with Blackberry Support. I hope it works for you too:
Finally got it working again! Re-downloaded the desktop software (but when you start it up, make sure to uncheck the automatic update option). While that was downloading, I was instructed to go to microsoft.com and search for and download .NET Framework 3.5. Once you click to download that, there will be an offer to download 2 other items. One of which will be Microsoft .NET Framework 4 Client Profile (Web Installer). Click to download that too. Once they are finished downloading, run both files. .Net Framework 4 Client Profile will take longer and will ask you if you want to repair or remove. Choose repair. The repair took several minutes, but once it was done, I clicked "Finish", opened the BB Desktop Software, UNCHECKED THE AUTO UPDATE OPTION, and plugged in my phone. Once windows finished installing the drivers, Low and behold! The Desktop software recognized that the phone was connected! I hope this helps you resolve your issue as well. When it again offered me an update I clicked to update later (meaning never!). Best of luck to you.

Windows 7 clients not Reporting Status to WSUS (downstream server) server running Windows 2012 R2

We have recently upgraded our WSUS server to Windows 2012 R2. Now none of the PCs reporting their status to the WSUS server and not getting updates at all. The PCs are contacting the Server but not reporting their status. Stopped the Firewall on Client and
Server. BITS and windows updates services are running.
Record the system time of the Windows 7 client.
Reboot the Windows 7 client.
Run this command from a command prompt: wuauclt /resetauthorization /detectnow.
Wait =30= minutes.
Performed the above steps. Please see the updates logs from a client.
2015-03-16 12:48:44:617
1040 15a4
Shutdwn user declined update at shutdown
2015-03-16 12:48:44:617
1040 15a4
AU Successfully wrote event for AU health state:0
2015-03-16 12:48:44:618
1040 15a4
AU AU initiates service shutdown
2015-03-16 12:48:44:649
1040 15a4
AU ########### AU: Uninitializing Automatic Updates ###########
2015-03-16 12:48:46:506
1040 15a4
Report CWERReporter finishing event handling. (00000000)
2015-03-16 12:48:46:584
1040 15a4
Service *********
2015-03-16 12:48:46:584
1040 15a4
Service ** END ** Service: Service exit [Exit code = 0x240001]
2015-03-16 12:48:46:584
1040 15a4
Service *************
2015-03-16 12:54:23:139
1024 1060
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0400) ===========
2015-03-16 12:54:23:214
1024 1060
Misc = Process: C:\Windows\system32\svchost.exe
2015-03-16 12:54:23:264
1024 1060
Misc = Module: c:\windows\system32\wuaueng.dll
2015-03-16 12:54:23:139
1024 1060
Service *************
2015-03-16 12:54:23:264
1024 1060
Service ** START ** Service: Service startup
2015-03-16 12:54:23:265
1024 1060
Service *********
2015-03-16 12:54:24:262
1024 1060
Agent * WU client version 7.6.7600.320
2015-03-16 12:54:24:263
1024 1060
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-03-16 12:54:24:272
1024 1060
Agent * Access type: No proxy
2015-03-16 12:54:24:532
1024 1060
Agent * Network state: Connected
2015-03-16 12:55:17:235
1024 1060
Report CWERReporter::Init succeeded
2015-03-16 12:55:17:235
1024 1060
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-03-16 12:55:17:235
1024 1060
Agent * Prerequisite roots succeeded.
2015-03-16 12:55:17:235
1024 1060
Agent *********** Agent: Initializing global settings cache ***********
2015-03-16 12:55:17:235
1024 1060
Agent * WSUS server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:235
1024 1060
Agent * WSUS status server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:235
1024 1060
Agent * Target group: Eastwood
2015-03-16 12:55:17:235
1024 1060
Agent * Windows Update access disabled: No
2015-03-16 12:55:17:247
1024 1060
DnldMgr Download manager restoring 0 downloads
2015-03-16 12:55:17:248
1024 1060
AU ########### AU: Initializing Automatic Updates ###########
2015-03-16 12:55:17:249
1024 1060
AU # WSUS server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:249
1024 1060
AU # Detection frequency: 22
2015-03-16 12:55:17:249
1024 1060
AU # Target group: Eastwood
2015-03-16 12:55:17:249
1024 1060
AU # Approval type: Scheduled (Policy)
2015-03-16 12:55:17:249
1024 1060
AU # Scheduled install day/time: Every day at 3:00
2015-03-16 12:55:17:249
1024 1060
AU # Auto-install minor updates: Yes (Policy)
2015-03-16 12:55:17:249
1024 1060
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-03-16 12:55:17:249
1024 1060
AU # Will display featured software notifications (User preference)
2015-03-16 12:55:17:259
1024 1060
Agent Switching to hardware-verified ClientId.
2015-03-16 12:55:17:260
1024 1060
AU Setting AU scheduled install time to 2015-03-17 07:00:00
2015-03-16 12:55:17:402
1024 1060
Report *********** Report: Initializing static reporting data ***********
2015-03-16 12:55:17:402
1024 1060
Report * OS Version = 6.1.7601.1.0.65792
2015-03-16 12:55:17:402
1024 1060
Report * OS Product Type = 0x00000030
2015-03-16 12:55:17:600
1024 1060
Report WARNING: Failed to load reporting information from WMI with hr = 80041002.
2015-03-16 12:55:17:601
1024 1060
Report * Locale ID = 1033
2015-03-16 12:55:17:654
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:655
1024 1060
AU Initializing featured updates
2015-03-16 12:55:17:655
1024 1060
AU Found 0 cached featured updates
2015-03-16 12:55:17:655
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:656
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:656
1024 1060
AU AU finished delayed initialization
2015-03-16 12:55:23:261
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 12:55:41:121
1024 1074
AU Triggering AU detection through DetectNow API
2015-03-16 12:55:41:122
1024 1074
AU Triggering Online detection (non-interactive)
2015-03-16 12:55:41:193
1024 1060
AU #############
2015-03-16 12:55:41:193
1024 1060
AU ## START ## AU: Search for updates
2015-03-16 12:55:41:193
1024 1060
AU #########
2015-03-16 12:55:41:218
1024 1060
AU <<## SUBMITTED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 12:55:41:218
1024 1194
Agent *************
2015-03-16 12:55:41:218
1024 1194
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-16 12:55:41:218
1024 1194
Agent *********
2015-03-16 12:55:41:218
1024 1194
Agent * Online = Yes; Ignore download priority = No
2015-03-16 12:55:41:218
1024 1194
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-03-16 12:55:41:218
1024 1194
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-03-16 12:55:41:218
1024 1194
Agent * Search Scope = {Machine}
2015-03-16 12:55:41:218
1024 1194
Setup Checking for agent SelfUpdate
2015-03-16 12:55:41:219
1024 1194
Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2015-03-16 12:55:45:440
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:45:893
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:45:897
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMPD98D.tmp with dwProvFlags 0x00000080:
2015-03-16 12:55:45:979
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:014
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:46:019
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:050
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:46:055
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:093
1024 1194
Setup Determining whether a new setup handler needs to be downloaded
2015-03-16 12:55:46:093
1024 1194
Setup SelfUpdate handler is not found. It will be downloaded
2015-03-16 12:55:46:093
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:52:237
1024 1194
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:52:237
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:53:377
1024 1194
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:53:502
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:56:705
1024 1194
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:56:896
1024 1194
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2015-03-16 12:56:01:618
1024 1060
AU AU received policy change subscription event
2015-03-16 13:00:00:824
1024 1194
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-03-16 13:00:00:824
1024 1194
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
2015-03-16 13:00:01:001
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:00:01:001
1024 1194
PT Initializing simple targeting cookie, clientId = f86ac648-7394-46eb-8f40-eb605f77d86b, target group = Eastwood, DNS name = ewd-wc-420-235.resultstel.net
2015-03-16 13:00:01:001
1024 1194
PT Server URL = http://ewd-srv-01.resultstel.net:8530/SimpleAuthWebService/SimpleAuth.asmx
2015-03-16 13:00:01:833
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {F92A18E7-8784-4828-89C9-F80085A422A7}.202, hr = 80041002
2015-03-16 13:00:02:004
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {C735DBB1-06B4-49F2-815F-97976B4B86A4}.102, hr = 80041002
2015-03-16 13:00:08:676
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {6A8FE277-1048-48B1-803B-4580C15BBDF1}.100, hr = 80041002
2015-03-16 13:07:37:795
1024 1194
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2015-03-16 13:07:37:795
1024 1194
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
2015-03-16 13:07:37:988
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:07:41:893
1024 1194
PT WARNING: GetExtendedUpdateInfo failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200
2015-03-16 13:07:41:893
1024 1194
PT WARNING: SOAP Fault: 0x000190
2015-03-16 13:07:41:893
1024 1194
PT WARNING: faultstring:Fault occurred
2015-03-16 13:07:41:893
1024 1194
PT WARNING: ErrorCode:InternalServerError(5)
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Message:(null)
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetExtendedUpdateInfo"
2015-03-16 13:07:41:893
1024 1194
PT WARNING: ID:4cd69d60-d69b-4591-88ad-5687cdda3265
2015-03-16 13:07:41:893
1024 1194
PT WARNING: PTError: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: GetExtendedUpdateInfo_WithRecovery: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Sync of Extended Info: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: SyncServerUpdatesInternal failed : 0x8024400e
2015-03-16 13:07:41:914
1024 1194
Agent * WARNING: Exit code = 0x8024400E
2015-03-16 13:07:41:914
1024 1194
Agent *********
2015-03-16 13:07:41:914
1024 1194
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-16 13:07:41:914
1024 1194
Agent *************
2015-03-16 13:07:41:914
1024 1194
Agent WARNING: WU client failed Searching for update with error 0x8024400e
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:930
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:930
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:42:021
1024 14f4
AU >>## RESUMED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 13:07:42:021
1024 14f4
AU # WARNING: Search callback failed, result = 0x8024400E
2015-03-16 13:07:42:021
1024 14f4
AU # WARNING: Failed to find updates with error code 8024400E
2015-03-16 13:07:42:021
1024 14f4
AU #########
2015-03-16 13:07:42:021
1024 14f4
AU ## END ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 13:07:42:021
1024 14f4
AU #############
2015-03-16 13:07:42:021
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:42:021
1024 14f4
AU AU setting next detection timeout to 2015-03-16 22:07:42
2015-03-16 13:07:42:022
1024 14f4
AU Setting AU scheduled install time to 2015-03-17 07:00:00
2015-03-16 13:07:42:022
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:42:022
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:46:919
1024 1194
Report REPORT EVENT: {CB48FD20-D762-4E5E-8CCA-5C27F3CFA04A}
2015-03-16 13:07:41:913-0400 1
148 101
{00000000-0000-0000-0000-000000000000}
0 8024400e
AutomaticUpdates Failure
Software Synchronization Windows Update Client failed to detect with error 0x8024400e.
2015-03-16 13:07:47:022
1024 1194
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-03-16 13:07:47:022
1024 1194
Report WER Report sent: 7.6.7600.320 0x8024400e 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2015-03-16 13:07:47:022
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:14:23:923
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:14:23:923
1024 1194
Report Uploading 1 events using cached cookie, reporting URL = http://ewd-srv-01.resultstel.net:8530/ReportingWebService/ReportingWebService.asmx

Don thank you for the reply.
But I do have the same issue on the other PCs as well on which WMI is good. And also i pointed the above PC to my primary WSUS server which is running windows 2003 and it reported successfully and downloaded the approved updates.
please see the below logs from the same PC after pointing to our wsus running on win2003.
2015-03-17 14:41:08:507
1020 f1c
Inv   # Talking to WSUS server = http://atl-wsus-1:8530
2015-03-17 14:41:08:508
1020 f1c
Inv   # Downloading Rule file from = http://atl-wsus-1:8530/Inventory/InventoryRules.cab
2015-03-17 14:41:08:508
1020 53c
AU #########
2015-03-17 14:41:08:508
1020 53c
AU ## END ## AU: Search for updates [CallId = {54490DE2-CF7B-4017-A553-6C8C1532E621}]
2015-03-17 14:41:08:508
1020 53c
AU #############
2015-03-17 14:41:08:510
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:510
1020 53c
AU Featured notifications is disabled.
2015-03-17 14:41:08:510
1020 53c
AU AU setting next detection timeout to 2015-03-18 16:13:54
2015-03-17 14:41:08:510
1020 53c
AU Setting AU scheduled install time to 2015-03-18 07:00:00
2015-03-17 14:41:08:510
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approved 5 update(s) for download (NOT for Ux)
2015-03-17 14:41:08:510
1020 53c
AU #############
2015-03-17 14:41:08:511
1020 53c
AU ## START ## AU: Download updates
2015-03-17 14:41:08:511
1020 53c
AU #########
2015-03-17 14:41:08:511
1020 53c
AU   # Approved updates = 5
2015-03-17 14:41:08:512
1020 53c
AU AU initiated download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, callId = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
2015-03-17 14:41:08:513
1020 53c
AU AU initiated download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, callId = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
2015-03-17 14:41:08:514
1020 53c
AU AU initiated download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, callId = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
2015-03-17 14:41:08:515
1020 53c
AU AU initiated download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, callId = {B6B35AC2-9BC1-4CFA-8421-D666C79464AD}
2015-03-17 14:41:08:516
1020 53c
AU AU initiated download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, callId = {F0D00A6F-36BC-4680-9BE4-4005742A2C93}
2015-03-17 14:41:08:516
1020 53c
AU Setting AU scheduled install time to 2015-03-18 07:00:00
2015-03-17 14:41:08:516
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:516
1020 53c
AU AU setting pending client directive to 'Download Progress'
2015-03-17 14:41:08:518
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:518
1020 53c
AU   # Pending download calls = 5
2015-03-17 14:41:08:518
1020 53c
AU <<## SUBMITTED ## AU: Download updates
2015-03-17 14:41:08:520
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:964
1020 f1c
Misc Validating signature for C:\Windows\SoftwareDistribution\Inventory\InventoryRule\InventoryRules.cab with dwProvFlags 0x00000080:
2015-03-17 14:41:08:976
1020 f1c
Misc Microsoft signed: NA
2015-03-17 14:41:08:993
1020 f1c
Inv   # Inventory Rule id = 8226C3A1-70D4-4848-B441-1555AC820A23, version = 1.0
2015-03-17 14:41:09:022
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:086
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:118
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:150
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:182
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:214
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:246
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:278
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:310
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:342
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:374
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:406
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:438
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:471
1020 f1c
PT WARNING: PTError: 0x80041002
2015-03-17 14:41:10:590
1020 f1c
Inv #########
2015-03-17 14:41:10:590
1020 f1c
Inv ## END ## Inv: Inventory Collection
2015-03-17 14:41:10:590
1020 f1c
Inv #############
2015-03-17 14:41:10:592
1020 f1c
DnldMgr *************
2015-03-17 14:41:10:592
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:10:592
1020 f1c
DnldMgr *********
2015-03-17 14:41:10:592
1020 f1c
DnldMgr   * Call ID = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
2015-03-17 14:41:10:592
1020 f1c
DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:10:592
1020 f1c
DnldMgr   * Updates to download = 1
2015-03-17 14:41:10:592
1020 f1c
Agent   * Title = Security Update for Windows 7 (KB3029944)
2015-03-17 14:41:10:592
1020 f1c
Agent   * UpdateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202
2015-03-17 14:41:10:592
1020 f1c
Agent   * Bundles 1 updates:
2015-03-17 14:41:10:592
1020 f1c
Agent   * {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
2015-03-17 14:41:10:598
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202] ***********
2015-03-17 14:41:10:599
1020 f1c
DnldMgr   * Queueing update for download handler request generation.
2015-03-17 14:41:10:599
1020 f1c
DnldMgr Generating download request for update {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
2015-03-17 14:41:13:863
1020 f1c
Handler Generating request for CBS update CF9A0A9F-EA32-4B84-8B11-647F8DE3432C in sandbox C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b
2015-03-17 14:41:13:863
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:13:863
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:13:863
1020 f1c
Handler Adding windows6.1-kb3029944-x86-express.cab (entire file) to request list.
2015-03-17 14:41:13:864
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:13:864
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202] ***********
2015-03-17 14:41:16:436
1020 f1c
DnldMgr   * BITS job initialized, JobId = {675985CD-3133-4157-9D02-06CC33C29C49}
2015-03-17 14:41:16:473
1020 f1c
DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3029944-x86-express_0c21886fd0931285b2d3a29773d3673c947f60b3.cab to C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b\windows6.1-kb3029944-x86-express.cab
(full file).
2015-03-17 14:41:16:644
1020 f1c
Agent *********
2015-03-17 14:41:16:644
1020 f1c
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:644
1020 f1c
Agent *************
2015-03-17 14:41:16:645
1020 f1c
DnldMgr *************
2015-03-17 14:41:16:645
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:645
1020 f1c
DnldMgr *********
2015-03-17 14:41:16:645
1020 f1c
DnldMgr   * Call ID = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
2015-03-17 14:41:16:645
1020 f1c
DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:16:645
1020 f1c
DnldMgr   * Updates to download = 1
2015-03-17 14:41:16:645
1020 f1c
Agent   * Title = Security Update for Windows 7 (KB3004361)
2015-03-17 14:41:16:645
1020 f1c
Agent   * UpdateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203
2015-03-17 14:41:16:645
1020 f1c
Agent   * Bundles 1 updates:
2015-03-17 14:41:16:645
1020 f1c
Agent   * {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
2015-03-17 14:41:16:648
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203] ***********
2015-03-17 14:41:16:649
1020 f1c
DnldMgr   * Queueing update for download handler request generation.
2015-03-17 14:41:16:649
1020 f1c
DnldMgr Generating download request for update {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
2015-03-17 14:41:16:678
1020 f1c
Handler Generating request for CBS update 151B27A0-4EA8-428F-BE06-C90A3CF0C2CA in sandbox C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25
2015-03-17 14:41:16:678
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:16:678
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:16:678
1020 f1c
Handler Adding windows6.1-kb3004361-x86-express.cab (entire file) to request list.
2015-03-17 14:41:16:687
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:16:687
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203] ***********
2015-03-17 14:41:16:732
1020 f1c
DnldMgr   * BITS job initialized, JobId = {27F85F04-0E56-4BFA-93E3-4D6BCB3ECB4F}
2015-03-17 14:41:16:758
1020 f1c
DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2014/12/windows6.1-kb3004361-x86-express_47f37958063afd2521ca42de8904b55d1aa85b89.cab to C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25\windows6.1-kb3004361-x86-express.cab
(full file).
2015-03-17 14:41:16:809
1020 f1c
Agent *********
2015-03-17 14:41:16:809
1020 f1c
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:809
1020 f1c
Agent *************
2015-03-17 14:41:16:811
1020 f1c
DnldMgr *************
2015-03-17 14:41:16:811
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:811
1020 f1c
DnldMgr *********
2015-03-17 14:41:16:811
1020 f1c
DnldMgr   * Call ID = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
2015-03-17 14:41:16:811
1020 f1c
DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:16:811
1020 f1c
DnldMgr   * Updates to download = 1
2015-03-17 14:41:16:811
1020 f1c
Agent   * Title = Security Update for Windows 7 (KB3031432)
2015-03-17 14:41:16:811
1020 f1c
Agent   * UpdateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203
2015-03-17 14:41:16:811
1020 f1c
Agent   * Bundles 1 updates:
2015-03-17 14:41:16:811
1020 f1c
Agent   * {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
2015-03-17 14:41:16:814
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203] ***********
2015-03-17 14:41:16:815
1020 f1c
DnldMgr   * Queueing update for download handler request generation.
2015-03-17 14:41:16:815
1020 f1c
DnldMgr Generating download request for update {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
2015-03-17 14:41:16:843
1020 f1c
Handler Generating request for CBS update EE556F37-7EAC-42B3-BD29-653F98E6E364 in sandbox C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba
2015-03-17 14:41:16:843
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:16:843
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:16:843
1020 f1c
Handler Adding windows6.1-kb3031432-x86-express.cab (entire file) to request list.
2015-03-17 14:41:16:844
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:16:845
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203] ***********
2015-03-17 14:41:16:881
1020 f1c
DnldMgr   * BITS job initialized, JobId = {6C5B3B60-DB8B-4B6F-9E40-D99CA43B366D}
2015-03-17 14:41:16:906
1020 f1c
DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3031432-x86-express_fb5326e90facfe6de39cf44fc4ed5ec630968ba5.cab to C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba\windows6.1-kb3031432-x86-express.cab
(full file).

After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Running window manager

Similar Messages

Maybe you are looking for