Running windows 7 64 I get this error from downloader.exe The procedure entry point ?GetRegisterInfo@@GXPADHOH@Z could not be located in the dynamic link library transport_dll.dll
I keep getting this message from downloader.exe running Windows 7 64 bit O/S each time I start Firefox 3.6.9. The procedure entry point ?GetRegisterInfo@@GXPADHOH@Z could not be located in the dynamic link library transport_dll.dll. I have uninstalled Firefox and reinstalled it on a number of occasions but this message box persists. I can still use Firefox by just clicking the message away but it is an annoyance when starting the program. Thank you for any info you can provide me on this.
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2
Similar Messages
-
When I boot computer this message comes up--The procedure entry point -objc-int-image could not be located in the dynamic link library objc.dll. I cloud will not open in conrol panel.
At face value, you're having trouble with an Apple Application Support file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
The recently released version of iTunes (11.1.5.5) included an update to Apple Application Support (AAS version 3.0.1). So it might be worth updating your iTunes to see if that helps with the apparent AAS/iCloud issue. -
hello this is the error message I receive when trying to open my Mozilla browser. a secondary error message appers afterward "could not load XPCOM". please advise, thank you!
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Can anyone help with the problems starting either Elements 13 or CC? Adobe are aware of the problems but offer no solutions.
Thanks JJ.
Unfortunately it still doesn't work! Maybe I should give up on Adobe products and look for a different photo managing software. Adobe doesn't seem to be interested in offering support of any kind!
Regards
John -
HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
itunes was not installed correctly. error 7 (windows error 127) --
I have already tried (4 times) completely unstalling and reinstalling as was suggested But didn't fix the problem.
HELP---CAN ANYONE SUGGEST SOMETHING ELSE TO TRY??HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
That one can be produced if you have an older version of Apple Application Support on the PC than is required by iTunes version 11.1.4.62. (The required version of Apple Application Support is included in the standard iTunes installers, but for some reason it hasn't been updating properly for some folks.)
Let's try updating your Apple Application Support to version 3.0 by doing a standalone Apple Application Support install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, can you launch iTunes without the error now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Firefox was updating and then crashed. Error message says: The procedure entry point XRE_createappdata could not be located in the dynamic link library xul.dll
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)Download a fresh copy of Firefox ( http://www.mozilla.com/firefox/all.html ) and do a reinstall of Firefox over the top of the current version.
If that still causes the same problem then do a clean reinstall.
Uninstall your current Firefox version and remove the Firefox program folder before installing a fresh copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll" Any ideas what my problem is?
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
This keeps popping up on my screen " The procedure entry point_ except_ handler 4 - common could not be located in the dynamic link library msvcrt.dll
== This happened ==
Every time Firefox opened
== a couple of weeks agoHappened before to some other people in the forum [http://support.mozilla.com/en-US/forum/1/401434 here] and [http://support.mozilla.com/en-US/forum/1/475784 here].
Please rename the file the file below and see if the problem persists.
<code>
c:\windows\system32\dwmapi.dll
</code> -
why am I getting this error message when I try to open a PDF file? Adobe Reader could not open 'SBA 413.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
It's difficult for anyone to say how to fix it. Try getting a new copy of it. Did you download it from a web site, as an email attachment, or something else?
I donwloaded that form from the SBA web site and it worked fine for me. It is an XFA form created in LiveCycle Designer, but those should work fine with the desktop versions of Adobe Reader. So try downloading it: http://www.sba.gov/sites/default/files/SBA%20413_0.pdf -
I get this message when I try to download a pdf file from a website.
"C:\DOCUME~1\user\LOCALS~1\Temp\physics.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences."
This is a new error. There used to be no problem.Do you have any setting for MP3 in Tools > Options > Applications ?
You usually need the QuickTime plugin to play MP3 files on Windows because that is the only plugin that supports that file extension if there is no MIME type specified to play the file with another plugin like Windows Media Player or RealPlayer. -
Is anyone else receiving this error message, "We could not complete your iTunes store request. An unknown error occurred (-50)."? Please Help
Try Here > http://support.apple.com/kb/TS1583
And See this Discussion...
https://discussions.apple.com/thread/4204776?start=0&tstart=0 -
This happened yesterday, 8/24/2011 after downloading Apple iTunes 10.4. In Win 7 64bit I get the following error upon every reboot. "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Please how do I fix this, Thanks.
In the case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
I just recently upgraded to the new itunes and getting this, ADAdPolicyEngine_DidEnterStation, could not be located in the dynamic link library C:|programsFiles(x86|itunes.dll, itunes.exe Entry point not found itunes Error 7 windows errors127
See iTunes launch errors caused by iAdCore.dll.
Review the rest of the user tip if required.
tt2 -
I get this error when downloading key not valid for use in specified state what do i do
i get this error when downloading key not valid for use in specified state what do i do
What is your operating system? What are you trying to download?
Maybe you are looking for
-
Error signature ModName: jvm.dll
Hello, I have a Java application that ran fine on my desktop PC (Windows), where I coded and compiled my program. But when I copied my program to another PC and ran it, I got this error message : "MyApp.exe has encountered a problem and needs to clos
-
Ible to install software version 2 on an iPod with version 1 software
Can I install software version 2 on an iPod running software version1?
-
Where have they gone, I have the frames and the names but the hotoes does not show. How do I find them.
-
I have been unable to download PDF's from trusted sites. While the file downloads, it will not open and is listed as unreadable. When I attempt to print to PDF docs are blank. If I simply attempt to print certain files they are blank as well. How
-
Html viewer - records per page setting
Post Author: bcarsto CA Forum: General Hi there General forum posters,I am using the html_page viewer option with Crystal Reports Viewer version 8. Is there a way to configure the number of lines per page with this viewer? If so, can someone tell me