Running Windows Terminal Server 2003 with old version of Adobe. got the message it was no longer supported and it stopped working. Trying to install XI and it gets about 70% done and stops. Ran the cleaner on the 9.3 version to remove it. We use this

Installing Adobe Reader XI and it is stopping at about 70%. No error, it just stops. If I hit cancel and try it again, I get the 2203 error.

You are right: CS5 installs Flash Player 10.1 beta. You cannot install an older version of Flash Player unless you completely uninstall the beta version first:
download the 10.1 uninstaller from http://labs.adobe.com/downloads/flashplayer10.html#uninstallers and save it to disk;
from a Command Prompt, run the downloaded uninstaller with the -force option.

Similar Messages

Tips to install Sap Gui On Windows Terminal Server 2003

Does anybody know any method to install SapGui on Windows Terminal Server 2003 to share it to many users ?
The problem is: when I try to install Sap Gui 6.40 via Control Panel-Add/Remove Programs it tells me that I must change the mode with "change user /install". I dont know the reason why it reports me that if I do it via Control Panel. And if I do that and then I launch the installation again it reports me the warning again.
What should I do ?
Thanks in advance for your help.

We have SAP R3 4.6C.
We want to optimize the bandwidth in a 802.11b radio. Because of that we dont want to run any application in the hand-held.
We'll intend to launch a remote desktop on a dozen hand-helds connecting the Windows 2003 Terminal Services server. In this server we could run SAP GUI, WebSapconsole or the browser.
Its important to note that the hand-held computers must only show the designed windows (sized to 16x20), removing title bars, transaction bar, menu bars, tool bars, status bars, etc. For this purpouse I think we can use WebSapconsole.
With this method we have noticed that when a error or warning is displayed it hides some part of the screen instead of presenting in the status bar.
I hope you all your doubts are clear now, if not just tell me.
Thank you.
PS. Sorry for my english.

What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.

What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.

jennyba wrote:
What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.
As has been mentioned, the software in Mac OS X that supported the running of PPC applications rather than current Intel applications on Intel computers such as your MBP was last seen in Snow Leopard. However, since I believe your MBP originally came with Snow Leopard, you may be able to boot from the DVD's that came with the computer and install it on an external HD and try to install Quark on that.
I think a better solution would be to buy Snow Leopard Server from Apple by phone (800-692-7753 and be specific about wanting part # MC588Z/A), installing it as a virtual machine in software like VMware Fusion, and then installing Quark 6 in that. You'll still need a license number to authorize the Quark installation.

Windows terminal server 2003 cluster

We have a FOG with three Solaris 10 x86 servers, SRSS 4.2, SRWC 2.3 with the latest SRSS 4.2 patches. All Sunrays have the latest firmware.
Kiosk settings points to a windows 2003 terminal server cluster. The two nodes in the windows cluster have latest SRWC 2.0.
The cluster entitles, two terminal servers and a session manager server, we use roaming profiles.
When pointing kiosk settings to the cluster FQDN the sunray sessions are routed to just one server in the windows cluster. But if we RDP to Cluster's FQDN from a regular desktop the windows cluster load balances properly.
I do need help understanding how SRSS handles sessions? specifically if nodes are behind a cluster with session manager. Could it be that the session manager it's incompatible with SRSS in kiosk mode since it tries to route sessions at the mean time SRSS is doing the same task?
Thanks,
RE
Edited by: estrar on Dec 5, 2010 5:43 PM

Hi Estrar,
Short answer: 2003 Session Directory does not do load balancing.
Long answer (to the above and your other questions):
The Sun Ray Server doesn't do anything with regards to load balancing the windows sessions. To the Sun Ray Server, or more appropriately the windows connector, it's just making the connection you tell it to.
With regards to the windows client "working", am I correct in guessing that you ran subsequent instances of MS-RDC to "prove" that it worked?
Most likely what happened there is that the PC, thus MS-RDC, received different IP addresses back from DNS for the FQDN with each launch. This is basically round robin, not load balancing. But I'd have to understand how you've done the FQDN of the cluster in DNS.
The most common initial reaction is that the DNS server is setup incorrectly (I'll plead guilty that I've had the same reaction). It is true that some DNS servers can be configured will return the same IP on the first dns query. This is called a cyclic ordering and results in the IP address of the resolved name every client to be identical. For example, if a DNS server is set for cyclic ordering, every first request for the IP of server A for xyz.com will be the same on all clients. The second query from the same client should result in server B being resolved, if not, then you do have a DNS problem.. However, in the case of Sun Ray Server, the "second query from the same client" would be the second session coming up, since, as far as the DNS server is concerned, all the Sun Ray session are coming from the same client. Therefore, even with cyclic ordering, round robin should work even better in a Sun Ray environment then a "fat" client environment. You can check the documentation for specific DNS servers on how to set a random order for round robin (which should be the default), but chasing down cyclic ordering of RR entries as a cause to this "issue" is basically a red herring in a Sun Ray environment.
More than likely the same IP being returned everytime is a side effect of the name service caching daemon (nscd). The job of nscd is to speed up name resolution. However, ncsd will break any round robin scheme as it caches the first server returned by the first query from the caller (i.e. the host doing the name lookup, aka the Sun Ray server) and all applications on the caller will use that address for the lifetime of the cache. The default lifetime of the nscd cache is 3600 seconds (an hour). To disable the name service caching daemon, run the following command on every Sun Ray server in the host group (aka FOG): svcadm disable system/name-service-cache
An über smart colleague mentioned the possibility of another problem that could exist even if nscd is disabled and the hosts are on the same subnet as the caller . This has to do with default behavior of the Solaris resolver library putting servers that reside on the same subnet as the caller at the top of the sort order. You can read the notes in the man page for "gethostbyname" and also the man page for nss(4) for more information, but both reference how this behavior can break round robin. The fix is to edit /etc/default/nss and uncomment (or add) the statement SORT_ADDRS=FALSE
While those two things will allow a Solaris based Sun Ray server (or any Solaris client) to properly recognize round robin entries, it still holds true that 2003 Session Directory does not do load balancing. The only role of session directory is to ensure that you don't get routed to a different terminal server in case you have an existing session on another server. Round Robin + Session Directory may be all you need, but bear in mind that it is not "load balancing". Users could still connect directly to one of the IP addresses vs the round robin DNS name and that would defeat the round robin scheme in place.
Load balancing is a separate component in 2003, either using an external device like F5's BigIP or using Windows Network Load Balancing (NLB) service.
The type of load balancing solution that can be used depends on what is meant when you use the term "cluster". If the cluster is a real implementation of Windows 2003 Clustering (i.e.the type of cluster you'd use for SQL, Exchange, etc) then you can't use NLB and would have to use an external load balancer. Sun Ray Windows Connector supports either IP based or token based load balancers, though we don't certify any third party products in this regard.
"Cluster confusion" occurs because Session Directory itself is supported by Windows 2003 Clustering in order to provide a highly available directory service. Easy to see how this would be desirable with a large number of terminal servers. However, NLB does not work, nor is it supported on Windows 2003 Cluster.
To further the confusion, when NLB is enabled on the NIC that is handling RDP traffic, one of the configuration tabs is "Cluster Parameters". But it is important to realize that this has nothing to do with Windows 2003 Clustering and is in fact incompatible with it. NLB makes use of independent servers (i.e. not clustered), which the primary requirement of those servers is that they are on the same subnet.
Finally, it is easy to get confused between 2003 and 2008 session directory when it comes to load balancing, but they are very different. 2008 "session directory" does do load balancing. In fact, to underscore this distinction/feature, Microsoft has renamed Session Directory to TS Session Broker. (See http://technet.microsoft.com/en-us/library/cc772418%28WS.10%29.aspx)
To summarize, with Windows 2003 you have two choices when it comes to load balancing and session directory.
1) Have a HA implementation of Session Directory and use an external load balancer
2) Have non-HA implementation of session directory and use NLB to do load balancing.
Good how to article on setting NLB on 2003 with terminal services here:
http://www.brianmadden.com/blogs/brianmadden/archive/2004/11/29/how-to-configure-windows-network-load-balancing-for-pure-terminal-server-environments.aspx

Photoshop Elements 9 Stopped Working - tried fresh install

Problem signature:
Problem Event Name:          APPCRASH
Application Name:          PhotoshopElementsEditor.exe
Application Version:          9.0.0.0
Application Timestamp:          4ca3884b
Fault Module Name:          ScCore.dll
Fault Module Version:          4.1.23.7573
Fault Module Timestamp:          4b915b01
Exception Code:          c0000005
Exception Offset:          0002287c
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1033
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789
Everytime I go to edit a file now, it stops working and gives this info.
I have tried uninstalling & reinstalling. Don't know what else to do. Been using it for months with no issues. I would try System Restore, but I don't have a good restore point saved.

Try resetting preferences
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.

SAP GUI Memory issues on Windows Terminal Server 2003!!

Hi All
We are currently experiencing serious issues with our terminal servers and SAP GUI. It appears that SAP GUI is consuming a large amount of memory inorder to run, which in term is causing our terminal servers to page more.
I am not sure where to start with this issue so any help would be great!
Thanks
Phil
Loads of points if someone helps me solve this!!!

Citrix won´t help much, it´s "just" a different protocol between the client and the server, Citrix itself will use even more memory.
Why are you sure, that the reason for this is the SAPGUI and not any other Office program?
Let´s calculate:
I´m writing this message on a TS too. My Outlook (2003) consumes ~ 32 MB memory (incl. virtual), I have 4 SAPGUI windows open which consume 64 MB and some telnet sessions (no Word, Excel etc.)
Let say roughly 128 MB all in all.
If you have 2000 users with 20 servers, means, 100 users on one server, that would be 12,8 GB memory - not caclulated other services running on that box (printserver etc.) including the operating system itself.
If your users have Internet Explorer (or other browsers) open too, you will need to add that amount too. 128 MB per user is the minimum.
If users use BEx (or other .NET based BI developer tools), that amount will doubled (at least).
SAP recommends a PC with at least 256 MB memory to run a SAPGUI with acceptable performance, do you have that much per users? How big are your single servers?
Markus

When trying to sync my ipod with itunes it gets about halfway done and freezes. any ideas?

when synching my ipod classic to itunes it syncs about half way then freezes and i start all over again and it keeps locking up. has anyone had this problem?

How about some details.
Version of Windows?
Version of iTunes?
What have you tried so far?

Event 123 - The DSM service was delayed by nn seconds for a driver query/download/install on device then screen freezes

The reader's digest version of the saga is I received a Dell Vostro 460 with a wiped disk. The PC emitted beep code indicating PSU or RAM issue when turned on. After resolving the marginal power supply with a new replacement, I installed Windows 7
but as soon as I would launch IE the system would freeze. All of the BIOS & device drivers are current. I tried upgrading to Windows 8 but kept getting the black screen right after the install process finished installing the devices. I had
to resort to a clean install. Having successfully install Windows 8.1 I have been able to a get to the desktop, however every time I launched IE my system freezes in the same way as with Windows 7. I installed a different browser and used that
to research the event log errors. As the system freezes, I see warning log entries with event id 123 entries:
Event 123 - The DSM service was delayed by 125 seconds for a driver query/download/install on device 'ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_________INTEL(R)_CORE(TM)_I7-2600_CPU_@_3.40GHZ\_8'
Event 123 - The DSM service was delayed by 517 seconds for a driver query/download/install on device 'PCI\VEN_8086&DEV_1C3A&SUBSYS_04AB1028&REV_04\3&11583659&0&B0'
Event 123 - The DSM service was delayed by 106 seconds for a driver query/download/install on device 'PCI\VEN_8086&DEV_0100&SUBSYS_04AB1028&REV_09\3&11583659&0&00'
Event 123 - The DSM service was delayed by 155 seconds for a driver query/download/install on device 'PCI\VEN_10DE&DEV_0423&SUBSYS_049410DE&REV_A1\4&2209AF9F&0&0008'
There are more but these warnings are stacked in groups of two or three then the error & critical entries indicating I did a hard reboot.
When I use Firefox browser to open several tabs everything is fine until I stream audio/video then the same freeze screen happens and i have to reboot. Anything you can offer will be very much appreciated.

Hi,
'PCI\VEN_10DE&DEV_0423 is a graphic card driver from the vendor’s official webpage.
Besides as you mentioned in the post, it happened when you launch Internet Explorer, there is an accelerated Graphics item in the Internet Explorer, the settings should be changed, please follow this way:
Go to the control panel, then select the Internet Option, go to advance, just like the screenshot below:
select the checkbox if it is empty, anyhow make it different from the previous settings, then restart your computer to see the result.
Wade Liu

Cannot run the big size exe file ( 900MB) on Windows Storage Server 2003 x86 SP2 OS(Hyper-V VM machine)

When I run a big size exe file(>900 MB) on Windows Storage Server 2003 x86 SP2 OS VM mchine(which is managered by Hyper-V server), I got the following error message:
Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
This setup.exe should be a trusted source because of it run other OS(windows 2003, windows 2008, 2008 R2 etc.). we use the same way to create the exe whose size < 700MB, it works fine on the same machine(Windows Storage
Server 2003 x86 SP2 OS VM machine). So I assume that the file size(>900MB) causes the problem, It seems that OS dont' support it.
My questions:
1. Is there the limitation of exe size to run on Windows
Storage Server 2003 x86 SP2 OS VM machine? If yes, what is the size of limitation?
2. What reason is this error? Is it related with Hyper-V?
Thanks,
Recky

Did you install the 2003 VM from scratch or did you create it via a P2V process? In addition to what Shaon says about not all applications running properly in VMs, performing P2V to create VMs can also cause issues with a variety of things.
First thing to check would be Shaon's suggestion to try it in another VM. If it works in another VM, and you P2V'ed this VM, try creating your Storage Server VM from scratch and try again. Better yet, if the application can be run on a later version
of the OS, create a 2012 Storage Server instead of the 2003 Storage Server as your VM and give it a try.
.:|:.:|:. tim

I am running CS6 on a 2014 21" IMac version 10.9.5. I have an earlier version of Illustrator on CS4. When launching the CS$ Illustrator the message says "License for this product has stopped working". What can I do to get this to work?

I am running CS6 on a 2014 21" IMac version 10.9.5. I have an earlier version of Illustrator on CS4. When launching the CS4 Illustrator the message says "License for this product has stopped working". What can I do to get this to work?

Mylenium,
Before downloading CS4 again, how do I uninstall the versions that are currently on my Mac?
Many thanks for your help!

Is BPC 7.0 compatible with Windows Terminal Server 2008?

Is BPC 7.0 compatible with Windows Terminal Server 2008? We are having printing issues when on WTS 2003.

BPC 7.0M SP08 was released on September 1st and now supports the client install on both Server 2008 and Windows 7 so yes, you should be able to use terminal server in Windows 2008 if you install SP08. It also has limited support for Office 2010, full support will come with SP09. SAP Note 1490544 is the central SP08 note, and 1504400 is the download note.
-Brian

Terminal server 2003 and window7 printer

we have a terminal server 2003 and now added a windows 7 workstation running rdp. all printers except the new hp2025n show in session by loading the printdriver 2020 on the server. How ever on the windows 7 desktop I had to load the 2020 driver for windows 7. The win7 driver will not load on the server, error this platform not supported. I understand that the 2 drivers have to match for the printer to be used in rdp. The other printer that come across is a black dell printer with no problems. so the driver is what I suspect is the issue.

gprater,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Is Apps compatible with Windows Terminal Server

Hi
Is Apps (any version but most importantly 11i) and for that matter the Database compatible with Windows Terminal Server? I am working with a company who are trying to determine if their IT strategy with Oracle is watertight moving forward, and we have early indications that the answer to the above, is 'No', but it would be nice to have a definitive answer... Anyone know of any resources that I can look at to obtain the above?
Thanks and Best Regards
Toby Hazlewood

No. This is not supported
Rajesh Alex

Can't install LabVIEW Run-Time Engine 6.1 on Windows Terminal Server

With my system admin, we tried to install the LabVIEW Run-Time Engine 6.1 on our Windows Terminal Server NT4. And we get an error all the time:
-install using the plugin
-install using LVRTE.exe
-install after rebooting the server
But I remember that we could install the Run-Time Engine 6.0 on another Windows Terminal Server NT4.
Is there any compatibility issues with the new Run-Time Engine 6.1 ??
Thanks for your help
Cyrille

Cyrille,
What is the error that you get when trying to install the run-time engine?
Are you installing it from the LabVIEW CD, or did you download it from the web site?
To further troubleshoot this problem, it would be best if you send us an email to [email protected] and send the above information.
Also, try running the installer from the command prompt window, and use the following syntax:
setup.exe/l*v
This will save the error log to the file you specify. Send us also this file to help us troubleshoot.
Thanks
Zvezdana S.
National Instruments

TS1490 i am running Windows Home Server 2011 and iTunes can't seem to connect to the iTunes Store nor run Genius on my Library. What do I need to do?

I am running Windows Home Server 2011 and have installed iTunes on my dedicated server, attached to my router. I can't connect to the iTunes Store nor run Genius on the server ONLY (iTunes runs fine on by two other PCs and my Apple TV and I share the libary that resides on the server). I am running a very current version of iTunes 64 bit. I have run the connectivity test and it failed.
My guess is that there is some setting in the Server software that i need to change to let iTunes access urls or computers on the internet. Does anyone have any experience with this software combination?
Thank you

Some guy managed to get this to work. The following link is for iTunes 10.5 but it should work for the current release.
http://social.microsoft.com/Forums/en-US/whs2011/thread/bd62ee3d-a933-4cad-ae9b- fd38adc994c0
Good luck!

Running Windows Terminal Server 2003 with old version of Adobe. got the message it was no longer supported and it stopped working. Trying to install XI and it gets about 70% done and stops. Ran the cleaner on the 9.3 version to remove it. We use this

Similar Messages

Maybe you are looking for