Running windows xp applications on a macbook air

I need to run some legacy windows xp applications in my new macbook air.  What version of windows 7 I need to use?

Welcome to the Apple Support Communities
First, check that those applications are supported. Then, if you have to run apps that don't need all the performance of the Mac, just download Parallels, VMware Fusion or VirtualBox, and install Windows on a virtual machine. In this case, you can choose the Windows version and edition you want to install, but I recommend Windows 7.
If you have to run apps that requires the maximum performance, you have to use Boot Camp. In this case, you can only install Windows 7 Home Premium, Professional or Ultimate (it's better to run a 64-bit edition). To install Windows on Boot Camp, just open "Boot Camp Assistant" and follow these steps to install Windows > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
If you are going to use Boot Camp, please follow carefully the steps, because you can delete OS X by mistake and lose everything. Apart from that, you need an external optical drive to install Windows. Any will work with the MacBook

Similar Messages

  • I'm running Lion on a Late 2008 MacBook Air.  With no other applications running, I can no longer Check for Software Updates.  It gets abut half way through the checking process and then freezes.  The MBA passes Disk Utility. Thoughts?

    I'm running Lion on a Late 2008 MacBook Air. 
    With no other applications running, I can no longer Check for Software Updates.  It gets about half way through the checking process and then freezes. 
    The MBA passes Disk Utility. Thoughts?
    Thanks
    Jim Taylor

    How long do you leave it?
    Mine can sometimes sit for quite a while (maybe 10 minutes??) before it finally finishes.
    You could look at the relevant logs via Console (Utilities folder) to see if Software Update is complaining about anything.
    charlie

  • How do I install windows and bootcamp on my macbook Air

    Hi
    I need to install Windows and Bootcamp on my macbook Air, due to a software tool a customer needs that only runs on windows.
    The initial instructions say I cannot do this with a remote DvDplayer,
    Who has experienced this?
    Chris

    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • How can I get Windows Internet explorer on my MacBook air?

    I have several websites that I need to use for my new job that have not been tested for Mac. I don't want to have to buy a PC laptop, so I was wondering if there is a tried and true way to get windows Internet explorer on my MacBook air.

    Or install Parallels 7 and then you can run IE just like any other app from within OS X itself. That costs around $50 plus the Windows license though.
    Personally I have created an IE9 RDP (remote) App on my terminal server at work and just run that. Looks like it is running on my Mac natively.

  • Does anybody know how I can run multiple skype accounts on my macbook air?  I found workarounds on youtube, followed the steps to set-up a second skype account but I can't login using the second account.

    How do I run multiple skype accounts on my macbook air.  I'm using MAC OS X 10.6.8.  I followed the workaround steps on youtube to set up a skype b account (application and folder) but when I open the skype b account I can't login. I get an error message saying "please check your network settings and try again".  My 1 skype account works but I need to run 2 skype accounts at the same time, 1 for a client and my own personal account.
    Thanks
    Yolanda

    How do I run multiple skype accounts on my macbook air.  I'm using MAC OS X 10.6.8.  I followed the workaround steps on youtube to set up a skype b account (application and folder) but when I open the skype b account I can't login. I get an error message saying "please check your network settings and try again".  My 1 skype account works but I need to run 2 skype accounts at the same time, 1 for a client and my own personal account.
    Thanks
    Yolanda

  • Two applications Pages on Macbook Air

    I have two applications Pages on Macbook Air.
    The first Pages has already been buying MacBook Air in package iWorks but it was shareware. Then I paid for a working version, but now I have two applications Pages and they interfere with each other. The first Pages is not removed as part of a package iWorks. How to make sure that there is only one application Pages?
    Pages ’09 version 4.3
    MacBook Air 2011 (2) OS X 10.8.2

    tasha.life.ibook wrote:
    thanks,
    link have many different applications, which need to download it?
    Download and run the Uninstall iWork 09 script.
    Jerry

  • What is the best way to transfer my music library from my windows pc to my new macbook air?

    what is the best way to transfer my large iTunes library from my windows pc to my new macbook air?  Not all purchased, many from CDs I owned

    Moving a library: Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive.  Hold down the option (alt) key (shift on Windows) and open iTunes.  At the prompt to create or choose a library choose the copied iTunes folder.
    If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music  then you don't even need to start with the option key held down, iTunes will automatically look for it there.  (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
    Windows users see tip at: https://discussions.apple.com/message/18879381#18879381
    Consider moving everything from your Windows PC to your Mac in a single move, including your iTunes library: About Windows Migration Assistant - http://support.apple.com/kb/ht4796 - Learn about how to use Windows Migration Assistant to migrate your files from a Windows PC to a Mac.

  • Can you run windows via bootcamp on the macbook pro retina display 2.5GHz dual-core Intel Core i5 512GB flash storage1

    Can you run windows via bootcamp on the macbook pro retina display 2.5GHz dual-core Intel Core i5 512GB flash storage1

    http://www.apple.com/support/bootcamp/

  • HT5639 Will running windows with bootcamp effect my macbook pro's overall speed

    Will running windows with bootcamp effect my macbook pro's overall speed ?

    Welcome to Apple Support Communities
    In some cases, there may be slowness in OS X because of the lack of free space. However, you shouldn't note this and in most of cases, performance is the same in Windows and OS X after installing Windows, more in the case of a MacBook Pro with Retina display.
    The only thing you have to worry is to give Windows the necessary space. The MacBook Pro with Retina display hasn't got a lot of storage

  • Why can't my Windows 7 machine see my MacBook Air?

    I have a Windows 7 desktop  and a MacBook Air. In the wireless network we have. I've set everything up so it should see each other. Windows 7 is new for us - we had it working before with XP... We have an XP laptop, a Windows 7 desktop and a MacBook air. XP and Windows 7 see each other and MacBook Air sees Win 7. But Win 7 doesn't see my MacBook Air... I saw a solution to take Win 7 off the homegroup - but I had already disabled homegroup because I read several problems with it. So that didn't solve my problem... HELP

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • HT5634 HOW WOULD I DOWNLOAD WINDOWS 7 BCA FOR MY MACBOOK AIR. I HAVE PARALLELS 7 FOR MAC AND WANT TO RUN QUICKEN FOR WINDOWS

    Which systems of Windows 7 do I download for my MacBook Air?  I have OS 10.8,5  I installed Parallels 7 for Mac and would like to run Quicken for Windows.

    You can run Windows 7 in Parallels. You do not need to run Boot Camp Assistant to install Windows if using Parallels. Visit the Parallels site for instructions regarding running Windows in Parallels.

  • Windows To Go on a Macbook Air

    I am testing the Windows To Go.  I am trying to make it run on a Macbook Air.
    This seems to work okay when I run it on my MBA connected to a Thunderbolt Monitor.  But I am unable to get it to work on wireless.  I am unable to get it connected to the network.  I know that Microsoft does not support Win2Go on a Mac.  But I am trying anyway. 
    I am using the Kingston Workspace Traveler.  I just read that SYSRUS has Mac support in their solution.  I was just curious anyone's experience with either of these two products?

    In your PC, you accessed to your Google Mail account using your browser. In Mac, the process is the same, but as your Mac is new, first you have to log in Google with your Google account.
    If you want, instead of having to open Safari every time you want to check mail, you can use the Mail application included in OS X. Open System Preferences > Mail, Contacts and Calendars, and add all your mail accounts. They will be automatically set up to be used in Mail, so just open the app.
    Then, after opening Mail, the process of deleting more than one mail is as simple as choosing the ones you want to delete pressing the Command key, and then, press the trash button in the toolbar

  • How do I install Windows 7 on my new MacBook Air?

    Hey everyone, I just purchased a MacBook Air (4GB ram & 256 SSD) with Lion OS... I have been a PC user for forever & a day... I am going to be installing Windows 7 on it because Wellview is not a mac friendly program aswell as other programs. I am trying to learn the difference between Parallels, Boot Camp, etc... I understand a partition & how it works on a PC & have been reading forums in Mac rumours to try & figure it out on this system... But, what would be the easiest way to install W7? I will have to download Windows 7 OS & it sounds like Parallel but it looks like this MBA has Boot Camp already installed on it. Also, would it be better to have the thunderbolt connected to a hard drive & keep everything off of the the MBA HD? Is there a way to upgrade the RAM in the MBA? I know, that's a lot of questions... But, I would rather ask them here & figure it out rather than asking someone on the phone... Yes, I am male... LOL... One other question I have is how will the touch pad work in windows, how do you hit the typically right mouse button when this laptop doesn't even have one? I know you use the different fingers for different actions as I have been experimenting with... Just wondering on that one... I'm sure it works somehow... LOL...

    OMG Morgan, you are an inquisitor .
    But I will try and answer all your questions:
    1+2: it depends on your demands: if you use both OS's often, and have a "normal" HDD you want to avoid restarting all the time and use a Virtualizer. With a MBA restarting is superquick. If you use Mac apps at the same time with Windows you better use the Virtualizer. But if you are having "bootcam windows" and decide to install a virtualizer later, this Virtualizer can make the VM of the bootcamp partition...
    3: you can not install Windows without a disk.
    4. The X stands for 10: Snow Leopard is 10.6... Leopard is 10.5... Lion is 10.7... They are all OSX. Befrore that there was OS9.
    5. The Bootcamp install is very good guided: Bootcamp makes the partition on your SSD and after that it will ask for the W7 install disk (in case of a CD you need the Apple superdrive). This partition will be about 60GB for W7.
    6. If you use Parallels, there is Kaspersky antivirus included (half a year), it will only install when you say yes on the install question (say no for W7) but as I said before: only use an antivirus in W7 and NOT in OSX, if you do not pay very good attention Parallels will install it also in OSX. Better use Avast, AVG, they are free, simple, fast, and good. NEVER use norton. But you can use the one you know form your PC life....
    7. delete button: same as backspace, if you hold the "Fn" key at the same time it deletes forward.
    8. When a new OS comes available (this not the same as update), make sure before you install it, that all your apps have compatibilty: you can read a lot of posts here of people who did not check before upgrading to Lion!
    (same goes for Windows 8, when it comes).
    No I don't know where W7 is the cheapest.
    9. 32-bit or 64 bit: both are good, it does not make much difference either will run a 32 bit app. I use XP which is 32 bit on a 64-bit Mac OSX, and 64-bit W7. Thus: it depends what you want to run. My old Bankapps are all 32-bit and will not run on W7.
    I hope I informed you enough to make your decisions now.
    have fun.

  • Airport Express not visible to Windows XP laptops - works with MacBook Air

    Frustration. I've been searching these Discussion boards and none of the proposed solutions seem to work for my problem.
    I am trying to set up a brand new Airport Express to stream iTunes wirelessly to my home entertainment system. The majority of my music resides on a Dell laptop running Windows XP Pro(SP3). I have a home WPA2-PSK WiFi network using the modem provided my local internet provider (Qwest). I've been trying to set up the AEX as a client on my existing network. I have turned off my laptop's firewall and virus protection.
    I used the Airport Utility to configure the AEX (setting the AEX name to something without spaces, setting a password, choosing join an existing network, selecting the correct network type (WPA/WPA2 Personal), entering my network's password, and enabling AirTunes). This seems to go well. After the restart, the orange light turns to a solid green light, but I get the familiar "Airport Utility was unable to find your Airport wireless device after restarting." I can get the Utility to retrieve the above group of configuration settings by entering the IP address and password via the Configure Other on the File pulldown. Despite the correct settings seemingly being saved to the AEX and the green light, the AEX is not available to my iTunes.
    At this point, I'm about 8hrs into this setup process. I have been through all of the recommended permutations of AEX hard reset (paperclip in the AEX reset button while plugging it back in and waiting for the rapidly flashing orange light), laptop reboot, linking my laptop to AEX via ethernet cable for setup, hook AEX to wireless modem via ethernet cable for setup, hook AEX and wireless modem to laptop via ethernet cable for setup, etc. Each time, the AEX settles out to green, but it is not seen by Airport Utility on the Windows XP laptop. I've now tried with a second Dell Windows XP laptop (also shut off the firewall and virus protection) with precisely the same results.
    Today I brought home my office MacBook Air. I reset the AEX and re-installed it as a client on my network and it was immediately recognized by the MacBook Air, and went on to stream iTunes wirelessly to my entertainment system (proof of concept). When I switch back to the Windows XP laptops, the AEX still cannot be found by the non-Mac laptops. They can find the AEX temporarily when I enter the IP address to the configure other, but cannot find the AEX after the reboot. The AEX is only available to the XP machines when the AEX is hardwired to either of the laptops via an ethernet cable.
    I still just want to be able to stream iTunes wirelessly from my primary Windows XP Dell laptop to my entertainment system. Please help. Thank you.

    WPA2-PSK (AES) = Apple WPA2 Personal
    WPA-PSK (TKIP) = Apple WPA/WPA2 Personal
    See if you can change the setting on your wireless router to read WPA-PSK (TKIP).

  • Running windows 7 & additional programs on macbook Pro

    Evening all,
    Im in the process of getting a new computer and very keen on finally getting on a macbook pro as do fair bit of design stuff etc(and i really want one!). Only problem is if i brought one i would also not have enough money straight away to replace my windows only programs like photoshop, indesign etc so would need to use windows on it with these programs.
    Has anyone got any experience of doing this and is the performance affected? or will using photohshop via windows 7 on boot camp(think thats the name of it) be as quick, responsive as using mac version of photoshop?.

    Mac's have been able to run MS Windows on them for several years now. You have several options for doing so, first is using Boot Camp which essentially turns your Mac into a PC. Boot Camp is included in OS X therefore the only expense you will have is for a license of MS Windows if you don't already have one. The upside is it provides the best performance, the down side is you cannot run MS Windows and OS X simultaneously. Another downside is as with any Windows machine that portion of the machine is susceptible to Virus's and other Windows malware so you need to protect it.
    There are also virtualization applications that allow you to run Windows side by side with OS X, meaning you can run both simultaneously. The most popular options are using Parallels or Fusion which are direct competitors that do the same thing. The upside of this solution is the ability to run Windows and OS X at the same time, the downside is if you are playing 3D games, doing 3D virtualization or CAD/CAM performance will be slower than a stand alone Windows machine. Again because you will be running Windows that portion of the Mac is susceptible to the same problems any Windows box is. I would think you would have excellent performance using this solution with Photoshop and would recommend taking this route. I would also upgrade your RAM to 8 GB (don't buy it from Apple though) this will help performance too.
    Roger

Maybe you are looking for

  • Background job output

    I schedule a job in backgroung proces(smartform). Whwn i click on the spool  to see the output ,  there is  error  "NO FRONTEND AVAILABALE" . how can i see my output of the back ground  job (smartforms). i am executing the process  like  1. tcode run

  • How to make picture on mainpage blog??

    So when i create a new entry it has the default picture that comes with the page. I then delete that picture and write my story put my picture in and even though i have put my new picture in it doesn't show up on the main page. Please check it out at

  • Adobe FlashIslands: Datacommunication and performance

    Hello everybody, We're building a complete frontend in Flash Islands, and at the moment we're working with just data binding. What I know at the moment: - fireEvent to SAP backend and pass along parameter(s) - [Bindable] vars in frontend, and binding

  • Boolean Search Constraint in new Java API doesn't work for value of false

    I'm developing an application that interfaces with MDM via the new Java API.  We're on MDM version 5.5 SP 4 and have the latest patches installed.  I can do searches fine on the repository, but have run into one problem with the Boolean Search Constr

  • List box (urgent)

    hi, i am working with oracle forms(6i).i want to display a list of items in a listbox.the items in the listbox are from a textbox(i.e,when a button is pressed the value in the textbox should be placed in the listbox). help me urgent..