Running Windows XP computer and iMAC on Airport simultaneously?

I am running my iMac with an Airport wireless connection to the Internet. can I add a Windows XP laptop with a wireless card to this network?

Yes you can.
I did that at work, where I have a PC running XP.
Since the PC did not have the wireless card, I bought a SMC USB adaptor and plugged my Airport Express as a router.
This way I can connect both the PC and my iBook to the network.
Also, I can mount the PC onto my iBook, if I want to!
The only problem I have at work is, I can not input a password into the windows machine. I do not have this when a windows user comes to visit me and uses my wireless at home.
I was not very concerned since I do not broadcast the network name and I put the power in the AX all the way down.
Deivy

Similar Messages

  • I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    +For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
    This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
    *Settings I have Enabled*
    5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
    Use Wide Channels is recommended for 5 GHz operation.
    Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

  • How do i run windows 8 on my imac

    how do i run windows 8 on my imac ?
    I have several engineering programs which have bee written for windows
    I have heard that boot camp does the job. Does anyone have first hand experience?

    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows 7 or Windows 8.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the

    I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the other copy of Lightroom before trying to launch"  The problem is, that I can only see one copy of LR5 open and cannot locate the ".lrcat.lock" file for the specific catalog I want to open. I have tried re-booting my computer, but this did not work.

    Thanks Geoff. I was finally able to locate the ".lrcat.lock" file relevant to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. THANK YOU

  • Windows 7 computer, and my macbook pro on snow leopard don't see each other?

    My windows 7 computer, and my macbook pro on snow leopard don't see each other. I have configured the windows section under the network prefrences with the required information, and still no luck. Does anyone have any sugestions for me?

    Shouldn't they see each other and let me use each of their files?
    Please pardon the obvious here, but have you checked to make sure that you have enabled the File Sharing option on both computers? You may have already done this, but your post did not mention this, so we can only go with the info that we have.
    If you have not enabled File Sharing, I can't help on Windows, but on your Mac...
    Open System Preferences (gear icon on the dock)
    Open Sharing
    Enter a check mark next to File Sharing
    I imagine that there is a similar setting for the Windows machine
    It would be a good idea to power cycle your entire network as well to make sure that the network is sequenced correctly. Power everything down, order is not important.
    Start your modem first and let it run a moment by itself
    Then start your main router the same way
    Continue starting each device the same way until everything is powered back up

  • ERROR MASSAGE-"The update could not be installed.Plase make sure there are no other copies of firefox running on your computer,and then restart firefox to try again".

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/870411]]</blockquote>
    "The update could not be installed.Please make sure there are no other copies of Firefox running on your computer,and then restart Firefox to try again"this kind of error massage i found but there are no other copies of Firefox running on my computer.So please solve my prob.I can not uninstall this because i have saved important bookmark on my system.When i start my Firefox that time browser is opening few times later may be it's my internet slow connection but everyone has slow connection internet they are not having this prob then why should i have this prob.Why it is taking little bit time to open?

    Thanks for the info about Trojan. It may be the problem. Meanwhile I went to Admin/Owner side and did some cleaning -- including trying to reload my Favorite/Bookmarks that have always carried forth from previous levels of Windows XP and earlier.
    The new computer here did not grab the Bookmarks from the previous, and yesterday I thought I had them loaded, and today went to Worker-Bee side and they are not showing.
    About those add-ons... I have no idea, but think I got everything up to date yesterday. I will look at your earlier reply tomorrow or this weekend when I have more time at home to learn from it.
    Thank you for your time in helping.
    Late here, heading to sleep. Marilyn

  • With the latest update I get the following error: The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again; suggestions, advice, help.

    Help>About Firefox> says I am using Firefox/3.6.10./GTB7.1 I get a note from Mozilla that there is an update. I download it after granting permission to change my machine. I say OK. A green bar slides across the monitor announcing that the update is being downloaded. When I then assume it is being installed I get the following error: The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again. There are no other copies running. The machine is not on a network. I am using WIN7

    Thanks for the info about Trojan. It may be the problem. Meanwhile I went to Admin/Owner side and did some cleaning -- including trying to reload my Favorite/Bookmarks that have always carried forth from previous levels of Windows XP and earlier.
    The new computer here did not grab the Bookmarks from the previous, and yesterday I thought I had them loaded, and today went to Worker-Bee side and they are not showing.
    About those add-ons... I have no idea, but think I got everything up to date yesterday. I will look at your earlier reply tomorrow or this weekend when I have more time at home to learn from it.
    Thank you for your time in helping.
    Late here, heading to sleep. Marilyn

  • I update my iTunes in my PC running window 7 today and immediately afterthat iTunes programme hauled. What shall I do???

    I update my iTunes in my PC running window 7 today and immediately afterthat iTunes programme hauled. What shall I do??? Can somebody help me??

    Hey yeow28,
    Thanks for the question. I understand that you are experiencing issues after updating iTunes for Windows. The following article may provide a solution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • How do I get the pictures folders in photoshop 7 out of My window XP computer and put them into my new computer windows 8 photoshop12

    How do I get the pictures folders in photoshop 7 out of My window XP computer and put them into my new computer windows 8 photoshop12

    I am so sorry for you and your situation. Were you using iCloud photostream?
    Otherwise I do not see any chance for your precious photos.
    Congrats anyway on the little darling!

  • An update tries to run, but an error message stating "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." I can't open Firefox

    I click on Firefox and it says that Firefox is installing your updates and will start in a few minutes. Then I get "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." this cycle never ends. Do I need to deinstall Firefox and re-install? If I do that, do i lose all of my bookmarks, etc?

    See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder:
    *C:\Documents and Settings\&lt;user&gt;\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    *(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
    *C:\Program Files\Mozilla Firefox\updates
    *Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    *Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. Do not remove personal data when uninstalling.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I run windows 7/8 and lightroom 5.7  i am getting an error message and here it is " lightroom encountered and error when reading from its preview cache and needs to quit". I am getting this message repeatly.  What do I need to do to fix it.

    I run windows 7/8 and lightroom 5.7  I am getting an error message and here it is  " lightroom encountered an error when reading from its preview cache and needs t quit"    How do I fix this.

    THANKS
    Hank Wilkinson
    Please visit my web site  <http://www.hankwilkinson.com/> www.hankwilkinson.com for the latest of my photos
    For information on any of these photos please email me or call 612-756-9970

  • HT204053 I recently replaced the hard drive on my Windows 7 computer and lost all of my music content. It should be on the iCloud, however. How can I get it back to iTunes? Can I "reverse-synch" and send it FROM my iPhone TO my computer?

    I recently replaced the hard drive on my Windows 7 computer and in the process lost all my music. I think it should be on the iCoud. Can I get it back from the iCloud to my computer? Or can I "reverse-synch" FROM my iPhone TO iTunes?

    All the music you purchased from iTunes can be re-downloaded, all the music you acquired without purchasing from iTunes can be accessed using Senuti (not free). The combination of these 2 will get your music back.

  • I currently run Windows 7 on my iMac using the Parallels software on a Virtual Machine. I now wish to use Windows through bootcamp. How do I remove windows from the Virtual Machine

    I currently run Windows 7 on my Imac through a Virtual Machine format with the Parallels software. I now wish to remove Windows from the VM restore the Hard Drive to a single partition then install windows 7 using bootcamp. How do I go about it

    The virtual machine isn't a partition on your hard drive, it's just a file. You can delete the vm by going into Paralells preferences or just drag t to the trash. Bootcamp will partition your hard drive for a Win 7 install.

  • I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2:  "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." help!

    I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2:  "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." I have dug a little bit into possible problems but haven't found a solution yet, one note is that the network connection is OK. A response would be highly appreciated!  Thanks in advance.

    Hi c1r1g1,
    If you are having an issue connecting to the iTunes Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

  • I had iTunes installed on my windows desktop computer and it suddently disappeared. I tried to reinstall it but get an error message and it won't reinstall

    I had iTunes installed on my windows desktop computer and it suddently disappeared. I tried to reinstall it but get an error message and it won't reinstall

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for

  • Work flow in PP

    Hi, Workflow # is activated in development client. The business object BUS2005 is there assigned in workflow. Agent is also assigned. But when i run the transaction this business object BUS2005 doesnot get triggered. If i tries to run the workflow it

  • Speed under Impacted B range

    Hey guys not gunna start saying BT promised this and that just looking for a bit of advice. For the last year or so my speed has been a pretty constant 63Mb I check it often with the Bras checker. Suddenly a few weeks ago it went UP to 69Mb (download

  • Problem closing iTunes

    Since upgrading to itunes 7.5 it always reopens when i close it. It always happens one time, not when i close it again. any ideas´?

  • How SAP ECC interface with SAP SRM

    Hi all, I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM? Thanks, best regards, Maria

  • Fonts in KDE 3.2

    I just installed AL 0.6 and the fonts in KDE are not being anti-aliased. Could this have something to do with a missing xft package? I already have the freetype module enabled in my xf86config. Where am i going wrong?