Runnung on UBUNTU. Cannot open files hosted by Imagebam. Only started recently. No problems in the past. Contacted Imagebam. They reviewed Linux diagnostic results and think it's a problem with the browser. Any ideas?? Thanks.

All attempts to open thumbnail images hosted by Imagebam are unsuccessful. Imagebam provided me with some diagnostic commands. I ran them and sent the results back to them. They said the results looked okay and that it was probably a browser issue. I have no trouble with any other file hosts and this problem only surfaced in the last few days. Hoping someone can help. Thanks.

Similar Messages

I bought an iphone4 from a friend and he was on orange i have put my o2 sim in the phone and it is saying restricted network with no service any ideas thanks

I bought an iphone4 from a friend and he was using it on orange i have put my o2 sim in the phone and it is saying restricted network with no service any ideas thanks

That is because the phone is locked to the Orange network and an o2 sim card is not going to work with a phone that is locked to Orange.
You either need to purchase an Orange sim card and use that in the phone, or you need to get your friend to contract Orange and get the phone unlocked so that you can use an 02 sim card.
At the moment you will never be able to use the 02 sim card if the phone is locked to Orange. Either use Orange or get the phone unlocked. It is as simple as that.

I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS, iOS 3.1.2. Thanks

I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS(Ireally don't remember if it's a 3G or 3GS), iOS 3.1.2. Thanks for your help

please help me!!!

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

Crop to the print size before pringing
LN

Problem with local JRE, any ideas?

Hi,
I'm using exe4j to create a .exe from a java project. I'm distributing a local JRE in the program folder. Which works on windows XP and Vista. But I don't get it to work in windows 7 (the program don't start).
If I remove the local jre and install java. It works in win7.
Any ideas why my local distributed jre won't work in windows 7?
Best Regards,
Daniel Andersson
Software: www.seeninadream.net/soft
Books: www.seeninadream.net (In Swedish)

what version is the local JRE?

Problem with Java doc -- any ideas

This is the command which produces the java docs:
javadoc -d docs -author -overview e:\workspace\ckviewer\src\overview.html -doctitle
"CkEntry / CkViewer Application and APIs" -sourcepath e:\workspace\ckviewer\src
cprs.as400 cprs.ckentry cprs.ckviewer cprs.pc5250 cprs.roi cprs.util
neva vistech.imageviewer vistech.jai.render vistech.util The java docs are built correctly except that the package.html files for each source folder are being left out. These are the errors:
E:\ckviewer\ckviewer.jar: Body tag missing from HTML
E:\ckviewer\ckviewer.jar: Body tag missing from HTML
E:\ckviewer\ckviewer.jar: Body tag missing from HTML
E:\ckviewer\ckviewer.jar: Body tag missing from HTML
E:\ckviewer\ckviewer.jar: Body tag missing from HTML
E:\ckviewer\ckviewer.jar: Body tag missing from HTML
E:\ckviewer\ckviewer.jar: Body tag missing from HTML
E:\ckviewer\ckviewer.jar: Body tag missing from HTML
E:\ckviewer\ckviewer.jar: Body tag missing from HTML
E:\ckviewer\ckviewer.jar: Body tag missing from HTMLOne error message for each of the 10 packages. What I don't understand is that the source within the packages is found. Each package is documented, methods listed, etc. The package.html is not processed.
Any ideas?
Thanks
Bill

I'm not familiar with the -overview option, but I bet
it's complaining about your overview.html file.That is a good suggestion but actually the overview file is being processed and shows up in the java docs. The "package.html" files in each of the source folders are being ignored. There are 10 source folders, 10 "package.html" files and 10 errors.
Any other ideas or suggestions how to call javadoc?
Thanks
Bill

Strange problem with project. Any ideas how to fix?

~
This problem occurred before the recent update, but persists after updating as well.
I had a project about 20 minutes long. Some time after I last exported it, it broke. At one point toward the end, when I play in the preview window, a four-second segment goes to black screen with "Source clip is missing." That alone is interesting, because I don't recall doing anything to move or delete the source.
But when this happens, the project window goes haywire. There is no longer a playhead, you can't see any of the clips after that point, the cursor stops working entirely, and iMovie all but freezes. The movie can continue to play, and you can stop and start play using the space bar, but everything else is hosed. The only way out is to quit iMovie and restart.
This behavior is persistent and completely reproducible.
Sadly, this happened before I backed up the movie. Not all is lost, though, for I have a version that is complete and functional up to the last segment, which is the one that broke.
Just wondering if anyone had any ideas as to what's going on, or perhaps how to fix it.
Thanks!
Rob

If it's on a windows network you have to enter your (windows) log in (name/password) credentials.
This should be a 1 time event. It will remember it thereafter.

Problem with Group Normalise- any ideas?

Hi everyone- a bit of weirdness which might be my fault... or not. I've been playing with the Group Normalise function and it might solve my problem (creating a consistent volume with backing tracks I've recorded over many years and systems). I tried it once- and got encouraging results. Then I started tweaking the parameters and suddenly it won't process the multiple files I have selected... it just processes the one (seems the be the last alphabetically in the list). After restarting Audition a few times and trying to avoid or recreate the problem I actually had it NOT processing any of the selected files! The catalyst seemed to be tweaking the maximum Db level- once I tried that, things went wrong. But now I can't even "start all over again" to try and recreate the issue, because it's not processing anything.
This morning I tried again, hoping that a complete system restart might have dumped the bug or at least give me that one chance of getting things done, but once again the Group Normalise feature will only actually process the last/bottom file listed in the selection pane. I tried emptying my Audition TEMP folders, but there was nothing there anyway.
The feature "sees" all the selected files and analyses them, adding statistics to the list. It's just the final step that is failing. When I click on "Run Normalise" it applies processing to just that last, listed file.
I've been working on this too long now- so my memory's getting flaky, but I swear the very first time I tried this function it worked properly. But no luck since. Obviously, the 3.01 update could be applied, but there's no mention of this issue being fixed in the release notes.
Any ideas, anyone?
Cheers, Graeme.
Audition 3.0, SP3 Win XP. E6600 CPU 3Gb Ram. ASIO4ALL driver with on-board sound(temporary driver until I get a new firewire card with a TI chip for my MAudio FW410)
Cheers!
Graeme Hague
Author/Composer
Freelance Audio Engineer

Hi Graeme,
you wrote that:
> I'll investigate MP3Gain since everyone seems to think it's a good move.
No, fix it before going to mp3.
> However, I solved the problem in a straightforward way- back to Steve's "use
> your ears" concept.
Hmmm ... that is a luddite concept ....
> With 70 tracks to balance I chose the best of them all as a benchmark,
> then loaded them ten at a time into the Multitrack Mixer View and basically
> "mixed" them to equal perceived volumes with the benchmark track as a control.
As often previously mentioned the average with a 300 milliseconds window and no frequency compensation of any kind works best for me, only really weird stuff needs a manual lowering of level. What you need to do is to define what average level your canned noise should be at, AVG 22.5 works well for vinyl, AVG 30 to 25 for classical music, higher for larger ensemble with more bass and AVG 25 to AVG 17 is probable for church organ - depending on playing style, it can be extremely dynamic, ie. at AVG 35 - and pop. You do NOT need to go to full scale, what you need is predictability. In house notation used, I find it to be a good strategy to define what AVG rating to aim for with a project, also btw. for for multitrack mixing because compressor setting presets with input AVG rating defined makes a lot of sense to my way of thinking. And yes ... you do NOT have to tweak the track to fix, knowing the AVG rating tells you what input gain to apply in the compressor .... that is, if you DO insist on keeping the number of DSP actions on your audio low. Some of the time I prefer conceptual simplicity .....
> Whatever settings the mixer required I then applied in Edit View, zeroed everything
> to re-check and- voila! As close as they'll ever get
A visual evaluation can be a good tool, move the guide lines from -1 dB to -9 dB and they will become helpful.
A wise and well thought out design concept is that average values show up quite differently in the group normalize windowm, this entertains the user and poses new challenges so that working with a project doen't get boring. The function works fine IF you aim low, do not aim for 0 procent clipping, aim for no mentioning of clipping in any file, and skip the frequency compensation part of it, it uses a fletcher-munson compensation without telling you what playback level to aim for. It could have been useful if expected playback sound level was enterable as parameter ....however, skip that part of it and it will work. I have encountered file combinations that lead to a numeric overflow when using A2, dunno how it is in A3, I need to make my mind up about what box to install it on first ....
Kind regards
Peter Larsen.

Printer problems after upgrading. My kodak esp 5250 says it has the printer head jammed. Reloading the software let it work once. Obviously an interaction problem with Lion. Any ideas?

Printer problem. Since installing Lion my kodak esp5250 all in one says the printer head is jammed. It isn't. Reinstalled software and it worked once but still gives printer head jammed message. Any ideas?

Only the obvious one: do you have the latest driver, and does that cope with Lion? Kodak's stated requirements include this, which is slightly suspect. Obviously an interaction problem with Kodak? Try exploring whatever help Kodak have.
System Requirements
Operating System Compatibility
MAC OS X 10.6.x, MAC OS X 10.5.x, MAC OSX 10.4.8 or higher required
Processor Speed
PowerPC G4, 1.2 GHz

Unable to download any files no matter the browser, any ideas?

I am unable to download any file, in chrome I got the warning that hte igetter plugin could not be loaded but in safari and firefox it just doesn't download the file.
Any help would be appreciated.

Back up all data, then uninstall "iGetter" according to the developer's instructions. Relaunch Safari and test.

Problem with AD Synchronisation - Any Ideas

We are in the process of migrating from our 4.5WS portal to G6 and thought we were doing OK until we tried to run our AD Authentication source. Although all the users & groups appear in our G6 portal and we can log on to the portal using our AD credentials whenever we try and run our AD Authentication job to check that it can still import users & groups post migation we get the following error in the log file.
Can anybody make any suggestions on what might be the problem?
Mar 1, 2006 3:05:40 PM- Starting to run operations (1 total) for job 'DRDL AD Sync Job - Run Once'. Will stop on errors.Mar 1, 2006 3:05:40 PM- *** Job Operation #1 of 1: AuthSource Agent [Run as owner 'Administrator']Mar 1, 2006 3:05:40 PM- Creating the Everyone In Auth Source group (if one doesn't already exist).Mar 1, 2006 3:05:40 PM- **********************************************************************************Mar 1, 2006 3:05:40 PM- Sync Agent is processing groups.Mar 1, 2006 3:05:40 PM- This job has failed due to the following exception: java.lang.NullPointerException at com.plumtree.automationserver.agents.PTAuthSourceAgent.ProcessGroups(PTAuthSourceAgent.java:833) at com.plumtree.automationserver.agents.PTAuthSourceAgent.PerformOperation(PTAuthSourceAgent.java:266) at com.plumtree.automationserver.shell.PTJobShell.perform(PTJobShell.java:628) at com.plumtree.automationserver.shell.PTJobShell.runJob(PTJobShell.java:210) at com.plumtree.automationserver.shell.PTJobShell.run(PTJobShell.java:100) The job was in the following state: Authentication Source Made Everyone Group; initializedMar 1, 2006 3:05:40 PM- *** Job Operation #1 failed: An exception has occurred: java.lang.NullPointerException. Current operation state: Authentication Source Made Everyone Group; initialized(282610)Mar 1, 2006 3:05:40 PM- Done with job operations.

Mark,
There is nothing showing in the log file which we would take to mean that the problem is connectivity to the AD AWS.
As another test we have set-up another AD Authentication source using exactly the same settings in the same G6 portal from scratch, i.e. through the GUI rather than a migrated version, and this appears to work fine. Having had a quick look at the records in the PTAUTHSOURCES table for both of these, i.e. the one that works and the one that fails, there appears to be no difference. But from all the symptoms it would point to the migrated Authentication source not being able to connect to the AD AWS 'service'.
Does this provide you with any more pointers?
Thanks,
Ross

Hi all- Metastream 3 plugin has been frozen- I cant remove it and cant seem to replace it with something else- any ideas on what I can do?

Metastream3 is a plug in that is used for a number of online games the kids try to use. They now get the message the plug in has been disabled.
When I go to the Add Ons/ Plugins- the 'enabe part of the menue is disabled.

Remove "Viewpoint media player" in Add/Remove (control panel)

I just transferred my garage band songs from my iphone to my mac. Why won't garage band open them? I just upgraded to ilife '11. Still won't work. Garage Band cannot open files in the "data" format.. Any Ideas?

I just transferred my garage band songs from my iphone to my mac. Why won't garage band open them? I just upgraded to ilife '11. Still won't work. Garage Band cannot open files in the "data" format.. Any Ideas?

Are you trying to transfer the GarageBand projects or the rendered audio files? What version of GarageBand do you have on your iPhone?
I do not think you can share your GarageBand projects from your iPhone to GarageBand on your Mac, unless you have iCloud, afaik, only the audio files.
How did you transfer the song?
To share from an IOS device the Projects or audio files, see: Share GarageBand songs
Regards
Léonie

I opened a file on my desktop that I don't remember putting there. It turned out to be a keychain certificate from a client of ours. Does this mean that they were spying on me? What is the deal with that? Any ideas?

I opened a file on my desktop that I don't remember putting there. We use many photos and I thought it was a photo file I was looking for. It turned out to be a keychain certificate from a client of ours. Does this mean that they were spying on me? What is the deal with that? Any ideas?

Interesting tid bit. I created an AAC of the original file, deleted the original MP3 from my library and also deleted the Clean matched track from the icloud.
Result is that it matched with the explicit version of Mrs. Officer this time.
What I am curious about is which songs this is happening for. I've went thru a few batched of about 500 songs at a time and redownloaded in 256k for many tracks. Sadly we don't have people to bring this to our attention and I have so much music that it's impossible to go thru every song to make sure I am getting the right version.

Hi when i switch on the macc 41 files open at once can not open any files while this is happing can still use AI & PS and the internet any help thanks...

Hi when i switch on the macc 41 files open at once can not open any files while this is happing can still use AI & PS and the internet any help thanks...

Are you wanting to stop the 41 files from opening at once or is this intentional? At what point do they open when you power on the mac or when you boot Illustrator? What OS version are you using?
If you can answer the questions above can provide better advice, but you may be running into something similar:
http://www.mactip.net/stop-lion-restoring-previous-files-apps/

Runnung on UBUNTU. Cannot open files hosted by Imagebam. Only started recently. No problems in the past. Contacted Imagebam. They reviewed Linux diagnostic results and think it's a problem with the browser. Any ideas?? Thanks.

Similar Messages

Maybe you are looking for