Runtime Analysis For Classes

Hi All,
Can we do runtime analysis for Classes and Methods in the same way as program and function module?
Thanks & Regards,
Samir

You can have a look at this thread Transaction SAT - Analyze Performance of Classes in which the OP has written a blog for the question.

Similar Messages

Runtime analysis for a Method

Hi,
Need some help on how to find the Runtime Analysis for a method in Class, as i am getting some performance issues with the statements in the method.
Please let me know ASAP about this Runtime Analysis for a method in a class

In Runtime analysis Look for
ABAP - In your ABAP code
DATABASE - It shows the performance of your SELECT statements in your program.
Just check how much % it is showing for both.
Check for following in your code.
1) Avoid SELECT *
2) Clear internal tables values which are not required at the ending of program, as it saves memory
etc.

Runtime analysis for an RFC function Module

Hi,
How to get an Runtime analysis for an RFC function Module?
I have an RFC function Module I am using it for a WEB INTERFACE . For this function Module I need to get Runtime Analysis.
Please do not duplicate or cross post
Edited by: Rob Burbank on Feb 21, 2009 11:42 AM

Total Questions: 40 (39 unresolved)
Duplicate thread locked.
Rob

Runtime analysis for interface(in sproxy)

Hi,
I want to tune an interface(XI - sproxy). What tools can i use?
Specifically, can i use runtime analysis for interface defined in sproxy.
Any inputs will be appreciated. Thank you.

Hi,
When you create a interface using a proxy you are handling two different environments. Runtime analysis will not be applicable to end-to-end (XI->SAP for inbound) solution.
If on the SAP R/3 end you have FM/program which is triggered by the proxy you can execute the FM in standalone to get the runtime analysis of the code.
I hope it clarifies.
You can get back if you have any doubts.
Regards,
Sandeep

Runtime Analysis for VOFM

Hi Folks,
Can we take a runtime analysis for VOFM routines?Please explain i am new at it.
Thanks in Advance.

1) Create a user variant in SE30 and tick particular units. ( Check the link given below)
2) Set the breakpoint on your routine's first statement and on the last statement.
3) Now run VC01 transaction through SE30.Debugger will stop at the first statement. Change to classic debugger and on the command line put /RON. ( I think for new debugger, it sometimes doesn't work )
4) Press F8. Once it reaches your routines last statement. Put /ROFF in the command line.
5) Now go back and see the analysis in SE30.
Refer the following external link
http://zevolving.com/2009/12/measure-the-performance-between-break-points-using-se30/ ( External )

Analysing details of SQL trace and runtime analysis for a report.

Hi,
I am trying to tune the performance of a Z ABAP report for target group export. A brief overview of what is done in the report is the retrieval of BP details present in the Target group including BP general, address, marketing attributes, person responsible and contact person details. As the target groups can be quite huge (around 6000 BPs), the report gives performance issues. I want to understand on how to analyse the details which I obtained from the run time analysis and SQL trace and on how to take it forward.
Any inputs in this regard would be helpful.
Thanks in advance,
Anushree

In Runtime analysis Look for
ABAP - In your ABAP code
DATABASE - It shows the performance of your SELECT statements in your program.
Just check how much % it is showing for both.
Check for following in your code.
1) Avoid SELECT *
2) Clear internal tables values which are not required at the ending of program, as it saves memory
etc.

Runtime analysis for background job

Hi,
Can we run SE30 for any background job...
Thanks & Regards.
Srini.

Hi Srinivas,
Refer to this
Run time analysis SE30 in background?
hope it helps you.
Thanks!

Runtime analysis(SE30) for a Background job

Hi Experts,
How to get runtime analysis for a Background job in SE30 transaction. Please advise.
Thanks in advance,
Vivenchandar R

Measuring External Processes
Use
The runtime analysis allows you to switch into work processes that are already running and to measure the runtime of dialogs running in them as though they were running in the current session. You can have up to ten external sessions, which may be of any type for example, dialog, update, or spool. This runtime analysis variant is ideal for monitoring long-running background jobs.
Filename and Directory
If you do not want to use the default filename and directory to store files, you can change them using the profile parameter abap/atrapath. If the profile parameter does not contain an entry at all, an error occurs when you start the runtime analysis.

Search FM for time analysis like(SE30 Runtime Analysis)

I want to use JCO to establish a time analyser. which can calculate the running time from bapis, just like the information from "SE30 Runtime Analysis". Is there a special Function Model for this usage?
Or actually it is impossible for JCO to resolve such a problem?
thanks in advance
regards

I am working with 4.6C.
In SE30 I gave the Program Name --> Execute.
BACK > Analyse> Runtime Analysis Evaluation Overview
On Pressing Icon HIT LIST --> The List will be displayed with CALL, GROSS, PROGRAM NAME, NET.
Now where can I find the Index used?
Help me out?
Regards,
Viji

Transaction for Runtime Analysis.

Hi all,
I am looking for the transaction where you define the path of the application,specify the variant (defined in se30),initiaite the analysis and once the action is done,we terminate the analysis.

Hi,
SE30 - Runtime Analysis Tool
This runtime analysis tools allows the ABAP/4 programmer to trace the tables used by the SAP dialog/reports programs. In the Analyze button, you can see four more buttons like:-
Hit List
Displays the execution time of each statement in the program.
Tables
Displays the tables accessed during run time.
Group hit list
Displays the execution time of all the statements and grouping them based on the type of command. e.g. performs, SQL and internal tables used.
Hirarchy
Displays the execution time of each statement in the actual order in which were executed. Uses indentation to indicate the level of nesting of statements within subroutines.
Any tables use by the transaction or program can be easily trace with the runtime analysis tools.
Go to transaction SE30
Type in the transaction code you want to analyze
4.6x
In the Restriction section: select the TMP -> Temporary variant
Click the Change button
Click the Duratn/type
Select None for Aggregation
Save the variant and execute again
After finishing the process, click back to SE30
Use F3 to move back to the initial screen of SE30
Click the Analyze Button
Click Goto -> Object-centered hit list -> Database tables
3.0x
Click Execute
After finishing the process, click back to SE30
Click the Analyze Button
Click the Table Button
After retrieving the table names, you can check the raw data with transaction SE16 - Data Browser or SE11 - Dictionary.
For example, if you want to display the data for MSEG - Material Document table
Transaction SE16
Type in MSEG for Table name and click execute.
Data Browser will display the default selection for you to display data. If you did not change the default and click execute the data browser will display the first 500 records.
Click Settings to change the List formats, User parameters and Fields for selection.
In 4.6x, you can use SE16N.
Transaction SE11 or SE12 (4.6x)
Type in MSEG for Object name and click the Display button.
Click Utilities -> Table contents for the default selection screen. If you did not change the default and click execute, the Dictionary will display the first 500 record.
Click Settings to change the List formats, User parameters and Fields for selection.
Transaction SE17
Type in the Table Name, put in the Selection value, put a 'X' in the Output column to display the data field and put in the Sort number from 01..99 (if you want to sort).
Regards,
Bhaskar

Time-dependent BW hierarchies in Analysis for OLAP

Hi all,
We are using time-dependent hierarchies in combination with a key date variable.
Tools used: Query designer based on SAP BW 7.4 and BO 4.0.
The following steps are executed:
Report is executed and key date is prompted
According to the key date, the correct time-dependent organisation hierarchy will be used in drill-down
Bring up variable screen again and select different key date
The drill-down changes according to the now correct time-dependent organisation hierarchy
The above scenario works for BEx Analyzer, BEx Web, Analysis for Office - but not for Analysis for OLAP.
Whenever I run through this scenario and confirm the updated key date, the following error is displayed:
cube.get.dimension.info.runtime.error : java.lang.IllegalStateException: There is no default hierarchy for dimension [ORG].
In the user guide I don't find any specifics about the hierarchies and since it works in all the other applications, I wonder where the error is coming from. I also could not find it anywhere else in the forum.
Has anyone experienced the same error or any suggestions?

Hi Peter,
This issue is captured in SAP Note 1941865. Resolved in 4.0 (8.5, 9.2 or SP10) and 4.1 (1.6 or SP03).
Symptom
In BI 4.1, Analysis for OLAP returns errors similar to:"An error occurred in the MDAS service while processing a request from Analysis, edition for OLAP. Try the operation again. If the problem persists, please contact your administrator. (AOC00041)" and/or "cube.get.dimension.info.runtime.error: java.lang.IllegalStateException: There is no default hierarchy for dimension [DIMENSIONNAME]"
The BW Query the AOLAP workspace is created against has 2 different hierarchies that have the same text description
Environment
SAP BusinessObjects Business Intelligence platform 4.0
SAP BusinessObjects Business Intelligence platform 4.1
Analysis, edition for OLAP
Reproducing the Issue
In CMC, create an OLAP BICS connection to a multi provider
Connect to BI launchpad and launch Analysis, edition for OLAP.
Use the connection to create a new workspace.
The error is observed
Cause
This issue has been logged as a defect under ADAPT01720287 for BI4.0 and ADAPT01713663 for BI4.1
Resolution
A fix for this issue is included in the following maintenance releases:
BI4.0:
Patch 8.5
Patch 9.2
Support Pack 10
BI4.1:
Patch 1.6
Support Pack 03

ABC Analysis for Customers

Hi All,
Please let me know the concept of ABC analysis for customer clasification in SAP.
What are all the configuation setting needed for the same?
What is the master data to be maintained?
How to run the ABC analysis for customers? with relevant report(s)?
Relevance of the field "ABC Class" (KNVV-KLABC) in Customer Master(how can it be used for ABC analysis for customers).
Thanks & Regards,
Roushni

Dear Roushni,
As per my concern there is ABC analysis for material but I don't about Customer ABC analysis.
Plaese got through this SAP help link to know about Material related ABC analysis.
http://help.sap.com/saphelp_47x200/helpdata/en/c1/37613d449a11d188fe0000e8322f96/frameset.htm
I hope it will help you,
Regards,
Murali.

Runtime exception for configurable products

Hi Gurus,
I am getting a runtime exception for configurable products on clicking the link You can select more product options in CRM 7 b2c application . But when i login with a registered user and click the same link , it opens up and takes to the page for configuration of products .
Please find the error from logs :
[EXCEPTION]
79823   java.lang.NullPointerException: It was tried to rebuild the connection because of invalidity. It is not allowed because the connection type is not JCoConnectionStateless. You may also check the user authorizations.
79824   at com.sap.isa.core.eai.sp.jco.BackendBusinessObjectBaseSAP.getDefaultJCoConnection(BackendBusinessObjectBaseSAP.java:55)
79825   at com.sap.isa.maintenanceobject.backend.crm.DynamicUICRM.readData(DynamicUICRM.java:121)
79826   at com.sap.isa.maintenanceobject.businessobject.DynamicUI.read(DynamicUI.java:767)
79827   at com.sap.isa.ipc.ui.jsp.action.InitDynamicUIAction.ecomPerform(InitDynamicUIAction.java:67)
79828   at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:375)
79829   at com.sap.isa.core.BaseAction.execute(BaseAction.java:212)
79830   at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
79831   at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:692)
79832   at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
79833   at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:409)
79834   at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
79835   at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
79836   at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
79837   at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
79838   at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
79839   at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
79840   at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
79841   at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
79842   at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
Can anybody help me out to find the issue .
Thanks and Regards,
Tony Isaac

Tony,
It looks more like an issue with the loading of the JCO properties before the logon. Can you go to XCM and try reentering the password and save the config. Once done do a test connection and restart the application.
Then set a breakpoint in the BackendBusinessObjectBaseSAP class in the method getDefaultJCoConnection().
Here when the current connection is invalid it tries to read the config properties from XCM. Just check if it is reading the correct values from the config ISA_COMPLETE which is read on the backend object.
In case of mismatch, you need to fix that or you could try to build a new JCO connection with your own parameters.
Pradeep
Edited by: Pradeep Kumar on Mar 11, 2010 6:20 AM

Runtime Analysis SE30

Hi BW Gurus,
i have my query based on a Virtual cube for BCS. I ran the query and its taking 14 minutes to give me the result. From RSRT i got the name of the program which run in the backend to generate the report. I took that program name and put it in SE 30 Runtime analysis.
ABAP - 26,100 (microseconds)--- 71.4% (I have some user exit variables).
DATABASE - 4678 (microseconds)----12.8% of total runtime
System 5799 (microseconds)--15.8% of total runtime
but the problem is I am using the same user exit variables in other queries and their response time is 3 seconds to 4seconds.
can somebody help in where is the exact problem
Q2) How to check that which SQL statements or database table is taking more time. where exactly we must put the breakpoint....
i am not at all good in ABAP.
Thanks will assign full points

Hi A.H.P,
thanks for the reply ...using ST05 do i have to first execute the query and then activate the trace or I can do it any time and later deactivate it.
Also the exit variable is that whatever the period user enters it will give the starting period of that Quarter. Like if user gives 005.2007 the data will be calculated for
period 004 (since its the starting point of the Quarter 2 [4,5,6] ) and period 005.
Yes it is derived from the other variable so the range I give is this
custom exit.. to... 0GMTO(which is fiscal year/period).
Can you please give your inputs Will assign full points

Program not in Library -- In ABAP Runtime Analysis SE30.. Plz Guide me guys

Dear all,
I have to execute one report program in SE30 ABAP Runtime Analysis tool.
So I have entered my program name in the SE30 but I have got 1 error " Program ( pgm name ) not in Library ".
Guys plz guide me on this asap.
Edited by: PI User on Nov 26, 2010 11:14 AM
Moderator message: too basic, too much SMS speak, too much "asap", thread locked, points removed.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Nov 26, 2010 12:33 PM

Hi
The error message is clear: the program you're trying to test by SM30 is not SAP (your SAP system of course)
Now try to check if you can see that program by SE38, but if you think the program is in SAP, prehaps you're running SM30 in another system:
For example:
the program was created in development system and you run SM30 in quality and that program hasn't been transported yet: so the program is in development but not in quality.
Max

Runtime Analysis For Classes

Similar Messages

Maybe you are looking for