Runtime audit browser shows the status busy for the cancelled OWB jobs

Hi ,
I canceled long running OWB job.But the runtime audit browser was showing the status as BUSY.
I observed the the oracle session (SID:48) was running and killed the session.
After killing the session,the status in runtime audit browser changed to COMPLETED.
Till that time i was with an impression that "if we cancel a OWB job then it will kill all the sessions/process that initiated".
Could please tell me why this is happening?
Anything wrong with my configuration?
Appreciate early response.
Thanks,
Naidu

Hi Naidu
Yes you are absolutely right. When you press the cancel button in the GUI, the runtime repository does not get the signal that he is been asked to stop and abort. The GUI cancels himself but the background oracle process is still on !!!. The only way to do is to kill the oracle session. Another way I tried to tackle is
go to the directiry OWB/10.1/owb/rtp/sql and run the file @list_request.sql in sqlplus. Note that you have to login as runtime repositiry owner. After you get the audit id, run the file abort_exec_request.sql and supply the audit id that you obtained by running list_requests.sql. Sometimes it does not work also . Hence the best method is to kill the process

Similar Messages

  • How do I get the status bar for the link preview on the right side of the browser permanently?

    I'm specifically referring to [http://support.mozilla.com/en-US/kb/what-happened-status-bar#w_what-do-link-previews-look-like this].
    Since the link preview pops up on the bottom left-hand side, it is hard to read when I have my bookmarks open. So I'm just trying to figure out what needs to be edited or added in about:config.
    Thanks.

    I can just suggest you to use [https://addons.mozilla.org/en-US/firefox/addon/235283/ Status-4-Evar] add-on to bring back the status bar. the URL preview will be shown on the status bar instead of blocking your view.

  • Problems with the OWB Runtime Audit Browser

    I executed some mappings in my project…
    I go to the Client Browser Version of the OWB Runtime Audit Browser (before I Started OWB OC4J Instance).
    I specified the Runtime Repository connection information and click in View
    Deployment Report or View Execution Report, but, when I access to the Runtime Repository I don’t see any data in the web page.
    I probed with differents filters but I didn’t see data!!!
    What is the problem?

    Hi Mark,
    Yes, I am sorry, I wanted to say 'I do not see any data'…, but when I connect (using the access user credentials and the QA User role or any other role), and click 'view execution report' I do not see any data!!!! I don’t have any data in the table (Only the name of the repository), I drill down to the details of the execution but I do not see any data!!!
    In the Filter Options section are the mappings in a combobox (Execution Filter) but I do not see any data about its!!!
    Besides, for example If I execute the query in SQL PLUS: select * from ALL_RT_AUDIT_MAP_RUN_ERRORS.
    It has 581 rows…
    What happens?
    Why I don’t see any data?
    Thanks!

  • Hi, my phone is showing this [N] symbol on right side of the status bar for certain apps. Any one knows what it means?

    Hi, my phone is showing this [N] symbol on right side of the status bar for certain apps like Facebook, Whatsapp, etc. Any one knows what it means?

    BTW it normally only shows if jailbreaked and also tells you that those apps are running in the background so the notifications can be poled .
    Be aware your battery life will degrade !

  • OWB 10.1.0.4: Query generated by Runtime Audit Browser

    Dear all,
    In our OWB 10.1.0.4 project we created a process flow which runs every night. This process flow executes some mappings and some PL/SQL procedures, defined as transformation procedures in the OWB project. In the RAB the execution of all the objects in the process flow is logged, including the start and end time.
    However, as we all know, opening the RAB is a bit of a hassle. Starting the OC4J, waiting for the browser to connect to the Runtime Repository... Moreover, we would like to make a report about the staging process.
    That is why I need to have this information in the database. The Runtime Repository should contain all the data I need.
    The thing I cannot seem to find is some audit data of our transformation procedures. In the Runtime Repository view ALL_RT_AUDIT_EXECUTIONS does not contain data of these procedures. The view WB_RTV_AUDIT_EXECUTIONS does, but there is no information about the start and end time.
    Since the RAB shows me the start and end time of each executed object (mappings and procedures), I would guess this information is available in the Runtime Repository.
    All in all, can anyone answer one of the following questions:
    1. What is the complete query that the RAB executes when clicking on 'View Execution Report'?
    2. Which object in the Runtime Repository contains audit information of the executed transformation procedures?
    Thanks
    Paul

    But how did you identify that there are no runtime records in all_rt_audit_executions for your PL/SQL procedure?
    I guess you tried to search by procedure name... (but what column you used for searching)
    In my case all_rt_audit_executions and wb_rtv_audit_executions contains the same number of records, so they should be always in sync.
    Oleg

  • OWB Runtime Audit Browser has no respond

    Hi All,
    After I started the "Start OWB OC4J Instance" and at the console, it shown:
    Oracle9iAS(9.0.2.0.0) Containers for J2EE initialized.
    Then I start the "OWB Runtime Audit Browser", and saw the Warehouse builder browser , Runtime Repository Report Web page prompt up. It then don't show any respond, whatever I input to the login information and click view report buttons. Does anything that I must set in order to make it work? and how could I turn the verbose of OC4J Apps on, to view more debug message?
    background information : I already could run mapping and process flow at my enviornment.
    Thx for your kindly help.
    Rds,
    CH

    Provide the following information in the Design Client login page:
    HTTP Server Host PORT (default 7778, use 80 for older version of Oracle HTTP)
    DAD (Name of the OWB Repository you want to browse. The repository should be set up properly. The web page will then be redirected accordingly. You will need to provide the OWB Repository name and password (this is NOT your OWB login user name and password).

  • Runtime Audit Browser - Step Type

    Hi,
    Why are not all Steps shown in the Runtime Audit Browser.
    Sometimes only Aggegator shows up, and at other times something else shows up.
    Can somebody expllain this behaviour.
    - Jojo

    You want detail about data?
    It depends on the role you've selected when entering audit browser. If you want data detail, you should choose the QA User role.
    I don't know if it's possible to configure the operator you want to have more detail about it. Have you tried altering the default audit level for this mapping?
    For info about the runtime audit browser, read the "Viewing Runtime Repository Reports" section in OWB User Guide.
    Regards,
    Marcos
    Message was edited by:
    Marcos Spínola

  • Error (access denied) when starting Client Runtime Audit Browser

    LS,
    After starting the OC4J instance, I try to start the Client Runtime Audit Browser. For a brief moment I see a DOS-box, then an IE-page appears saying the following:
    ======================================================
    ERROR
    The requested URL could not be retrieved
    While trying to retrieve the URL: http://127.0.0.1:8999/owbb/RABLogin.uix
    The following error was encountered:
    Access Denied.
    Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
    ======================================================
    Any idea whether this is a local problem?
    I've tried applying the settings as mentioned in the configuration guide, but the Bypass option for the proxy is impossible to set since we do not use a proxy server.
    Your thoughts?
    Regards, Patrick

    Good morning All,
    Maybe I've got the wrong idea of what is all needed to be able to run the RAB locally, but I thought that starting the OC4J instance would be sufficient to get started.
    In the Installation and Configuration Guide the following is mentioned:
    2.7 Step 6. Configure the Web Browser for Design and Runtime Audit Browsers
    2.7.1 Add "LOCALHOST" to Your Web Browser Proxy Server Bypass List
    2.7.2 Configure the Cache Management in Your Web Browser
    2.7.3 Configure Warehouse Builder with a Net Service Name
    As said before:
    @2.7.1, we do not use a proxy (according to Internet Explorer settings) therefore I can't add 'localhost' to the bypass-list, but then again I think that it does not need to be, since there is nothing to be bypassed in the first place.
    2.7.2 has been implemented.
    @2.7.3, I added the net service name manually to TNSNAMES.ORA (since I also needed that to be able to get on to the database using TOAD and SQL*Plus).
    We do not have 9iAS integration for RAB, nor do we have OEM integration.
    Are there other things that need to be implemented? Mentioned so far have been HTTP-server and RTP services, but paragraph 2.7 does not mention anything about this. Maybe there are certain services that need to be running on the server (like HTTP and/or RTP), even though I would like to run the RAB locally?
    Where does one actually need RTP for?
    Thanks in advance.
    Cheers, Patrick

  • OWB Runtime Audit Browser

    Hi,
    I am not not able to open the Runtime Audit Browser.
    Before doing the above steps ,i configured the Internet Explorer Browser as per the installation Configuration Guide documentation.I did the following settings.
    I. To add "localhost" to your Internet Explorer proxy server bypass list:
         1. From the Tools menu, select Internet Options.
         2. In the Connections tab, click LAN Settings.
         3. Check the Bypass proxy server for local addresses option.
         4. Click OK.
    II. Configure the Cache Management in Your Web Browser
    We must set the cache management on your Web browser for any client you use to
    access the Design and Runtime Audit Browsers.
    To configure the cache management in Internet Explorer:
    1. From the Tools menu, select Internet Options.
    2. In the General tab, in the Temporary Internet files section, click Settings.
    3. For the Check for newer versions of stored pages option, select Every visit to
    the page.
    4. Click OK.
    3. Configured Warehouse Builder with a Net Service Name
    I did start the Runtime OC4Z instance before opening the Runtime Audit Browser.It is opening the empty page.
    I am getting the following error in OC4Z instance:
    Error starting the HTTP-server:network subsystem failed:JVM_Bind.
    Thanks for your help.
    Vinay

    If you are running everything locally, you should have to start the OC4J instance from the OWB menu and run the RAB from the same menu. In the RAB login page you should enter the runtime repository user name and password, the machine name where you are running the DB, the DB port number and the db instance name. It should work without problems.
    What version are you using and what is your configuration (do you run everything on your PC?).
    Regards:
    Igor

  • Runtime audit browser

    Hello,
    I want to delete runtime audit browser data. How to do that? One way is once we revome that repository and recreate then audit data will go. But here I don't to remove repository. If somebody knows please explain how to remove runtime audit browser data.
    Thanks
    Santi

    I used following SQL query to clean up the audit information. But still doen't clean up all the audit info. Any idea why it can't clean up everything?
    BEGIN
    FOR purge_ids in (select distinct EXECUTION_AUDIT_ID id
    from rep_owner.ALL_RT_AUDIT_EXECUTIONS
    where updated_on < to_date('09/14/2007', 'MM/DD/YYYY')
    LOOP
    dbms_output.put_line('Purging ID: '|| purge_ids.id);
    rep_owner.wb_rt_api_purge.purge_execution(purge_ids.id);
    END LOOP;
    END;

  • Status Profile for the supply relationship Vendor

    Hi Experts,
    We have a requirement to maintain status profile for the supply relationship. we try here to just copy from standard but we don;t get through. since we are not able to assigned here Business transaction as well as when we assign this profile to the inspection type 01, system gives wanrning message that "Status profile QM_P_00X is not allowed for "Insp. lot with plan and char."
    Pl help me  to resolve this issue
    MV

    We have defined Status Profile QM_L_00X that is copy of  SAP defined status profile QM_L_003. we have maintained two status RRNR and QINF. In RRNR Maintained business transaction make usage decision :-disalowed (X) and set action (X) and result recording:- allowed(x)
    In QINF maintained business transaction close insp complete:-allowed(x) set(x) complete inspection short term :-allowed(x) set(x) and start inv post bef Usage decision:-disallowed(x) no action (x)
    this status profile is assigned to inspection type, inspection plan has been created , and mic is assigned which has indicator set required char, single value, print, LSL, Sampling Procedure.
    My Problem is when record inspection result and closed it.and go to for usage decision system doen not allow me to do UD ,
    mv

  • RSRV not showing number of record for the newly created cubes

    In RSRV Elementary tests i execute database information for a newly created cube.It is executed fine and it is showing the no of dimensions and line item dimensions but it is not showing the diff tables E,F.... I tried refreshing the statistics of this cube in the manage and did check statistics aswell.But it is still the same.and I tried in the program SAP_INFOCUBE_DESIGNS  it is showing for all the cubes except for the newly created once.
    Is there any settings as such.
    Let me know ASAP

    Hi Ninad,
    Use the program SAP_INFOCUBE_DESIGNS and get the cube size in bytes.
    Transaction se16 -> fact table name, /bic/f[infocube name] and /bic/e[infocube name] or /bi0/f.. and /bi0/e for business content infocube, click 'number of entries' - This is for no. of records.
    Transaction DB02 -> 'detail analysis' -> object name = [infocube name]
    Function Module - RSDU_INFOCUBE_TABLE_SIZES_INF
    Bye
    Dinesh

  • Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

    Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

    I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off".  I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
    Can somebody advice.
    Thanks

    Can you please confirm me the following steps...
    Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
    Make sure your setting for that composite is not Off, keep inherit or production or development.
    Thanks,
    N

  • When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
    Message Edited by bleakreserve on 02-3-2005 06:34 AM

Maybe you are looking for