Runtime Compatibility Mode in Forms 10g

Dear All
I would like to achieve the Runtime Compatibility Mode in Forms 10g, is there any work around to do this. Kindly let me know. This is little bit argent
Thanks in advance
by
Thangaraj

Thank for your reply Bernd
I need to achieve the same functionaliy in 6i, the scenario is like this,
i have a madatory item and i will set the runtime compatibility mode 4.5 then at runtime i can able to leave the filed empty if i press the SHIFT+TAB key, if i press tab or enter key alone the error message should be displayed "Field must be entered" , this is functionality is working fine in 6i forms if you set the Runtime Compatibility Mode is 4.5.
but this is not heppening in 10g forms, because we have the same source in 6i whenever there is a need we will compile it with 10g template and give to the customer, now its not working so its creating big trouble.
i have seen something in meta link but that is not feesible. pls do the need ful
Thanks
Thangaraj

Similar Messages

  • Runtime Compatibility Mode property

    Hello!
    I have a problem after the migration from Forms6i to Forms9i because there is no Runtime Compatibility Mode property anymore. In the previous version I used 4.5 value for that field because that was the only way to realise a sequance of trigger firing. If you put 4.5 value (in a master-detail structured form), WHEN-CREATE-RECORD fires, and then WHEN-NEW-RECORD-INSTANCE when you jump from master to detail block. I need that because I use copying a new value of some items from master to detail block at the time of transition between them. If you omit 4.5 value, you have a firing just WHEN-NEW-RECORD-INSTANCE, without a firing WHEN-CREATE-RECORD.
    Now in Forms9i we don't have such field (Runtime Compatibility Mode property), so I don't have first scenario. It's a significant problem for my forms!
    Have anyone got an explaination or suggestion for this? Thank you in advance!!!
    Dejan

    This is yet another reason why we encourage customers to never fall too far behind.  The further you are from the current version, the more difficult it will be to upgrade.  In most cases, new major releases (at least for Forms/Reports) are only released once every 2-4 years (approximately).  Therefore, if you planned to stay within 2 major releases of the current, you might only be upgrading once every 6 years or so.  This seem fairly reasonable and would make the process much easier.  So, for example, if the current version is 11gR2, you should be on at least 10 as these versions are about 6 years apart.  Trying to get from 4.5 (and you didn't mention exactly which 4.5.x) will expectedly require more effort and time than if you were already on 6 or 9 or 10.
    If you are coming from non-web versions (pre-6.0.8), our recommendation is that you stop at Forms 6i (6.0.8) and get your application working here before moving forward.  Major code and any GUI design changes should be done at this level.  The application should be verified to work correctly before continuing.  Following the 6i to 11g Upgrade Guide previously mentioned will make this process a little easier because it will tell you what needs to be changed (if anything).  Once your application complies with the changes mentioned in the Guide, moving from 6 to 11 should be mostly simple.  The biggest issue will be getting users accustomed to the application now that you have gone from a character mode or client/server interface to web.  But since the functionality of the application will be mostly the same, for the users, it will be mostly just about getting used to the app looking different.
    Something else to consider is that there are various organizations that can assist you with the upgrade.  For example Oracle Consulting and Oracle Partners.  These groups often have utilities to help identify the problem areas you mentioned as well as other application analysis tools.

  • Runtime compatibility?

    I hope someone can help me to answer this question:
    Forms Runtime Compatibility mode is set to 4.5, how can I change the setting to 5.0?
    Regards Roar

    You can set Form Module property Runtime Compatibility Mode to 5.0.

  • How to make the oracle forms 10g applet or runtime the size of 1024x768?

    Hi,
    Can anyone tell me
    How to make the oracle forms 10g applet or runtime the size of 1024x768?
    Thanks in advans..

    Please post your question in Forms Topic
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • Change user on runtime  in forms 10g

    Dear all,
    I want to switch user in oracle forms 10g runtime.
    for example I have three user "usr1", "usr2", "usr3" and one main user "main_system"
    In forms i have four button i.e bt1,bt2,bt3,bt4
    Currently when user access the forms user is "main_system"
    If user press button "bt1" then forms connect with "us1".
    If user press button "bt2" then forms connect with "us2".
    If user press button "bt3" then forms connect with "us3".
    Finally user press button "bt4" then forms connect with "main_system"
    I hope you will help me and thanks in advance
    Regards,
    Saeed ul haq

    Hi user11957950
    Pls share us the code to inspect the problem ...
    did u try using the alias of the data base... ?
    the following is an example that can help....
    BEGIN
    :global.quit := 'FALSE';
    :global.v_attempt := 0;
    END;
    WHEN-WINDOW-ACTIVATED-TRIGGER
    --MAXIMIZE WINDOWS
    SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, WINDOW_STATE, MAXIMIZE);
    SET_WINDOW_PROPERTY('LOGIN_FORM', WINDOW_STATE, MAXIMIZE);
    IF :global.quit='TRUE' THEN
      Log_on;
    END IF;
    ON-LOGON TRIGGER
    logon(get_application_property(USERNAME),
          get_application_property(PASSWORD)||'@'||get_application_property(CONNECT_STRING), FALSE);
    if not form_success then
      :global.bad := 1;
      raise form_trigger_failure;
    end if;
    LOGON BUTTON CODE
    WHEN-BUTTON-PRESSED TRIGGER
    if :LOGIN_BLOCK.USERNAME is null then
      message('User must be entered !');
      go_item('LOGIN_BLOCK.USERNAME');
      return;
    end if;
    if :LOGIN_BLOCK.PASS_WORD is null then
      MESSAGE('Password must be entered !');
      go_item('LOGIN_BLOCK.PASS_WORD');
      return;
    end if;
    set_application_property(CURSOR_STYLE,'BUSY');
    :global.bad  := 0;
    if :LOGIN_BLOCK.CONNECT_STRING is null then
      logon(:LOGIN_BLOCK.USERNAME,:LOGIN_BLOCK.PASS_WORD, FALSE);
    else
      logon(:LOGIN_BLOCK.USERNAME,:LOGIN_BLOCK.PASS_WORD||'@'||:LOGIN_BLOCK.CONNECT_STRING, FALSE);
    end if;
    if :global.bad = 0 and form_success then
      set_application_property(CURSOR_STYLE,'DEFAULT');
      open_form('MAIN_MENU');
    ELSE
      :global.v_attempt  := :global.v_attempt  + 1;
      set_application_property(CURSOR_STYLE,'DEFAULT');
      if :global.v_attempt  < 3 then
        MESSAGE('Username/Password was invalid. Please re-enter !');
        go_item('LOGIN_BLOCK.USERNAME');
      else
        MESSAGE('Three Invalid Login Attempts. Account Locked');
        exit_form(no_validate);
      end if;
    end if;
    CANCEL BUTTON
    WHEN-BUTTON-PRESSED TRIGGER
    BEGIN
    EXIT_FORM(no_validate);
    END;
    PROGRAM UNIT Log_on
    PROCEDURE Log_on IS
    BEGIN
      :global.quit := 'TRUE';
      exit_form(no_validate);
    END;
    if this didn't solve ur problem pls tell us what error did u get pls tell us the details...!
    Hope this helps...
    Regards,
    Abdetu...

  • Obiee 10g on windows7 compatibility mode unwork

    hi, experts,
    I install obiee 10g,
    before installation , I set the compatibility mode of setup.exe to windows vista sp2.
    however, the setup progress still detects the environment as windows 7.
    how to solve it?
    Thank you very much!

    hi,
    Are u sure that u have followed the steps correctly ?
    http://onlineappsdba.com/index.php/2010/03/22/how-to-install-obiee-on-windows-7-obiee-training/
    Copy the file to different location and try it once
    Thanks,
    Saichand.v

  • HELP! Forms 10g Windows Runtime Problem!!!

    After I installed Forms 10g windows, I modified the configuration according to my Forms 9i configuration.
    But when I open a form and run it, the runtime URL only refer to a temporary htm file which jumps to:
    http://localhost:8890/forms90/f90servlet
    I have to enter the query strings to run the form, like
    http://localhost:8890/forms90/f90servlet?form=C:\webutil\forms\CIMS10g.fmx&userid=OSSCHINA/OSSCHINA@orcl&buffer_records=NO&debug_messages=NO&array=YES&query_only=NO&quiet=NO&RENDER=YES
    So how can I make the proper configuration to auto-generate the correct query strings when running the form, just like what it is in Forms 9i?

    Suicheng,
    which configuration did you change and what do you mean by "when I open a form and run it".
    Do you mean the preferences settings in the Forms builder ? There is a button to reset the URL used by the Forms builder to bring it back to the deault setting
    Frank

  • Strange runtime result on forms 10g

    Hi,
    I am using forms 10G. Db is 10G.
    When I run the simple Scott’s emp table
    It runs on internet explorer and instead of giving emp table information it shown something like that:
    <html> <head> ORACLE FORMS.</head>
    <body onload="document.pform.submit();" >
    <form name="pform" action="http://lalo:8889/forms90/f90servlet" method="POST">
    <input type="hidden" name="form" value="I:\test\emp.fmx">
    <input type="hidden" name="userid" value="SCOTT/TIGER@orcl">
    <input type="hidden" name="obr" value="yes">
    <input type="hidden" name="array" value="YES">
    </form> </body></html>
    what is this?
    How should we get the forms simple screen on runtime?
    Where should we get entry so on it runs independently?
    Though is running well on 6i.
    Juma

    This is a duplicate of strange runtime result on forms 10g
    See my response to your original thread.

  • To run Forms 10g on Windows Mode

    Is there possibility to run Forms 10g on Windows mode, not on Web ?
    Thanks.

    If you want to test your forms locally there is an OC4J component with the Developer Suite which can be started so you can run your Forms on your local station. This is no client/server but you run your webforms local.

  • Runtime problems after migrating from Flex3 to 4 in compatibility mode

    We are migrating our Flex-3.2 application to Flex 4.1, mainly to take advantage of the new text flow/engine features. In a first step we decided to go with compiling for MX-only and in Flex-3-compatibility mode.
    Thanks to some helpful resources (
    http://www.adobe.com/devnet/flex/articles/flexbuilder3_to_flashbuilder4.html
    http://stackoverflow.com/questions/1563482/any-flex-4-migration-experience
    http://www.adobe.com/devnet/flex/articles/flex3and4_differences_02.html
    ) I am able to compile our application.
    But I find myself surprised about the amount of runtime differences ranging from the problem that I cannot cast ResultEvent.currentTarget to HTTPService ( which apparently was introduced in 3.5 ) to many layout problems to differences in event dispatching ( e.g. one of our legacy components listens to the add event which it just doesn't seem to get anymore ).
    It seems there is very little documentation on this. I'd like to find a list with detailed changes so that we don't have to rely on QA to stumble across hopefully all issues.
    This documents lists some, but doesn't seem exhaustive.
    Does someone have a better list of documented changes from SDK 3.2 to 4.1?
    Thanks
    Stefan
    PS. Concrete example of one surprising change:
    In Flex 4:
        <?xml version="1.0" encoding="utf-8"?>
        <mx:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:mx="library://ns.adobe.com/flex/mx" layout="absolute" minWidth="955" minHeight="600">
        <fx:Script>
        <![CDATA[
        private function notFired():void
        trace("ADDED");
        private function fired():void
        trace("COMPLETE");
        ]]>
        </fx:Script>
        <mx:TextArea add="notFired();" creationComplete="fired();"/>
        </mx:Application>
    Now do the same in Flex 3 and you'll see both events fire.

    The add event is a bug.

  • Forms 10g installed and running on Windows Vista

    <font color=0000FF>Update 12-Dec-2008: </font>Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
    <font color=0000FF>Update 07-July-2008: </font> Added text at the bottom showing how to find patchsets for Forms 10g.
    <font color=0000FF>Update 29-May-2008: </font> This thread was started in November, 2007.  In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista.  As time permits I'll try to keep the information in this post up to date.   Updated information will be inserted <font color=0000FF>as blue text.
    </font>
    <font color=0000FF>Original message begins here:</font>
    This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop.   The other thread describes installing Forms 6i:
          Forms 6i installed and running on Windows Vista
    Please read through the initial part of that post for the background.  I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years.  <font color=0000FF>(Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista)</font>  So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one.  I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
    <font color=0000FF>Update 29-Jan-2008: </font> Unfortunately, it turns out that the Forms 10g Builder running on Vista <font color=0000FF>had</font> a major flaw:   If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors.  The problem is reported and described in this thread:  Error compiling a form under Vista
    <font color=0000FF>Update 12-Mar-2008: </font> Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
    <font color=0000FF>Update 25-July-2008: </font> Applying Patch 7047034 has corrected the problem.   See this link within this thread:   Forms 10g: Installing Patch 7047034 on Windows Vista
    Webutil note:  I am stuck in a Forms 6i client/server world, so all my forms must run in that environment.   Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
    Internet Explorer note:  On Windows Vista, IE CANNOT be used to run the Web Forms runtime.  It crashes immediately when you try to run a form.  Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java.  <font color=0000FF>[ Correction:   IE7 on Vista now runs the Forms 10g forms.   You just need to add "?config=jpi" to the browser URL when starting the Web Forms session.   More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]</font>
    The Oracle Developer Suite download page:
        http://www.oracle.com/technology/software/products/ids/index.html
    Oracle Developer Suite Installation Guide:
        http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
    The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
    I.  Preliminary system changes in Windows
    When I started installing, I got the following error message:    Install has encountered an error while
        attempting to verify your virtual memory settings.
        Please verify that the sum of the initial sizes of
        the paging files is at least 256 MB.To fix this:  Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
    Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
    Virtual Memory shows a "Total paging file size for all drives: 2337MB.
    Click "change", Uncheck "Automatically manage paging file size for all drives"
    Click "custom size:", set Initial size to: 2048, Max to 4096
    Click set button, then OK, get message:The changes you have made require you to restart your computer before
       they can take effect.Restart the computer.
    II.  Installing Forms 10g
    1.  Download two files from Oracle:
        ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
        ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
    2a.  Before extracting, it is a good idea to shut down any virus protection software.  It can sometimes prevent some files from being created.
    2b.  Extract both into the C:\oracle directory, as disk1 and disk2.
    3.  Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder.  (In windows explorer, right click, properties, Compatibility tab.)   Change the compatibility to run as Windows XP (Service Pack 2).
    4.  Right click setup.exe and click "Run as administrator"
    5.  Select "Installation type" = Complete (1.11 GB)
    6.  Received this message:Windows Firewall has blocked this program from
    accepting incoming network connections.  If you
    unblock this program, it will be unblocked on all
    public networks that you connect to.
    C:\users\steve\appdata\local\temp\orainstall...
      2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
    7.  Received this message:  "Provide outgoing mail server information"  I entered the smtp mail server that I use.
    8.  A summary screen displayed showing 274 products under New Installations.
    I clicked the Install button.
    9.   Received this message:  You can find a log of this install session at:
    C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
    10.  The installation completed.  Installed products shows Forms 10.1.2.0.2
    III.  After the install completed
    1.  Create a shortcut to the Forms 10 Builder on the Desktop.
    On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database.  If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder.  Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form.  Also do the same on the Start, All Programs shortcut for the Forms Builder.
    Edit:  After applying Patch 3, the following steps are not necessary.
    Set its compatibility to Windows XP.
    Set checkbox: "Run this program as as an administrator."  (Without this, FormBuilder will NOT open a PLL library.)
    Click the "Show settings for all users" and change values there.
    2.  Copy "Start OC4J Instance" icon to desktop.
    Set its compatibility to Windows XP.
    The first time it runs, I got a Windows popup to unblock program named Java.  I clicked "Unblock".
    3.  tnsnames.ora:
    Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
    to:  tnsnames_orig.ora
    If you created a tnsnames.ora file for Forms 6i, just copy it to the path above.  If not, do this:
    Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
    Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
    4.  Optional:  Create an easily accessible folder to store fmb files:
    C:\users\steve\.1\fmb10
    You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
    To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
    MD .1
    That will create the folder within the current directory -- mine defaults to C:\users\steve
    Note:  If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder.  If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file.  Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
    5.  Change the Forms 10g Default.env file using a text editor.
    This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle!  I hate the registry.)  No more Regedit.  The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
    Locate line with:  FORMS_PATH= and add:
        ;C:\users\steve\.1\fmb10
    Add a new line:
    FORMS_MMAP=FALSE
    The above allows compiling an fmx while the form is running.
    Add a new line:
    FORMS_ROWLOCK_OPTIMIZATION=FALSE
    (This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...)  See bug 4068896
    Add a new Line:
    FORMS_RESTRICT_ENTER_QUERY=False
    This allows use of Query-Where window in enter query, after entering a colon in any input field.  Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record.  Oracle shut it down to prevent "sql injection" attacks.
    6.  Jiniator setup:
    Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
    It installs Jinitiator 1.3.1.22.
    I installed it in C:\oracle\JInitiator 1.3.1.22\
    For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in   C:\Program Files\Mozilla Firefox\plugins.
    For Netscape, the path is:  C:\Program Files\Netscape\Navigator 9\plugins
    7.   Browser settings
    See the note above about using Firefox 2 and not Firefox 3!
    In Firefox 2 go to:  Tools-> Options-> Content
    Uncheck the "Enable Java" checkbox
    --Firefox terminates if this is not done!
    Note:  After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting.  I am suspicious that one of these installs re-enables java in the browser.
    Also note:  some web sites cannot display properly if java is disabled.  Example:  U.S. time website: http://www.time.gov   Use Internet Explorer to view these.
    In Netscape make the same changes as Firefox.  Without disabling java, it also terminates when you try to run a form.
    Creating a url to use in the browser:
    Try this:
        http://127.0.0.1:8889/forms/frmservlet
    If it does not work, change the 8889 port number as follows:
    Open file:  C:\oracle\DevSuiteHome_1\install\portlist.ini
    Note the number in line:
    Oracle Developer Suite HTTP port = 8889
    Use the number as the port number.
    You can also change the 127.0.0.1 to the computer name:
    Control Panel, System and Maintenance, See the name of this computer (under "System").  Mine is "steve-PC"
    So the alternate URL is:     http://steve-PC:8889/forms/frmservlet
    To try out the URL, start the OC4J instance set up above.  Then start either Netscape or Firefox, and enter the URL.  You should get a welcome screen.
    If the above URL works, start up the Forms Builder, and open Edit, Preferences.  On the General tab, uncheck the "Build before running" check box (optional).  On the Runtime tab, set the "Application Server URL to the url above.
    To run a real form, add this to the URL after frmservlet, (with no spaces):
        ?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
    but replace the parts in curly braces with the appropriate values.  Example:
        http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
    Setting up Forms Builder to directly run a form in the browser:
    Run the Forms Builder.  Go to Edit, Preferences, Runtime tab.
    Set the Application Server URL to:
        http://127.0.0.1:8889/forms/frmservlet
    (or use whatever URL string you developed above)
    Set the Web Browser Location to:
        "C:\Program Files\Netscape\Navigator 9\navigator.exe"
    (or an equivalent to run the Firefox browser).
    8.  FORMSWEB.CFG file changes
    The file is located at:
    C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
    I changed the following two lines in the file, but these are my personal preferences:
    separateFrame=true
    lookandfeel=Generic
    9.  FMRWEB.RES file changes
    For Oracle help:  Enabling Key Mappings
    The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms.  The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
    In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
    I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys.  These are keys that are available to users, but they either would not use, or are disabled within most forms.  The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters.  (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
    My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
    The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
    Here is the main part of my fmrweb.res file:#
    #Jfn :Jmn:  URKS            :Ffn :  URFD
    #    :   : (User-readable   :    : (User-readable
    #    :   :  Key-sequence )  :    :  function description)
    118  : 1 : "Shift F7"       : 74 : "Clear Form"
    121  : 0 : "F10"            : 36 : "Commit"
    117  : 0 : "F6"             : 65 : "Create Record"
    10   : 1 : "Shift Enter"    : 82 : "Cursor to Home" # sdsu uses this
    123  : 0 : "F12"            : 82 : "Cursor to Home" # sdsu uses this
                                        #: --Alt+Home works, but leaves the Action (first
                                        #: --pull-down menu item) highlighted.  Press Esc or
    36   : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
    117  : 1 : "Shift F6"       : 63 : "Delete Record"
    119  : 0 : "F8"             : 77 : "Execute Query"
    120  : 0 : "F9"             : 29 : "List of Values"
    9    : 0 : "Tab"            : 1  : "Next Field"
    40   : 0 : "Down-Arrow"     : 7  : "Next Record"
    9    : 1 : "Shift Tab"      : 2  : "Previous Field"
    38   : 0 : "Up-Arrow"       : 6  : "Previous Record"
    112  : 0 : "F1"             : 35 : "Show Keys"
    116  : 1 : "Shift F5"       : 69 : " Clear Block"
    116  : 2 : "Ctrl F5"        : 3  : " Clear Field"
    113  : 1 : "Shift F2"       : 80 : " Count Query Hits"
    112  : 1 : "Shift F1"       : 78 : " Display Error"
    114  : 0 : "F3"             : 73 : " Duplicate Item"
    115  : 0 : "F4"             : 64 : " Duplicate Record"
    69   : 2 : "Ctrl E"         : 22 : " Edit Field"
    122  : 0 : "F11"            : 75 : " Enter " # Causes validation, w/o cursor move
    118  : 0 : "F7"             : 76 : " Enter Query"
    81   : 2 : "Ctrl Q"         : 32 : " Exit"
    112  : 2 : "Ctrl F1"        : 30 : " Help"
    34   : 0 : "Page Down"      : 66 : " Next Set of Records"
    119  : 1 : "Shift F8"       : 79 : " Print"
    10   : 0 : "Enter/Return key": 27: " Enter/Next Field"
    33   : 0 : "Page Up"        : 12 : " Scroll Up"
    116  : 0 : "F5"             : 87 : " F5 Key for special uses"
    #121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled.  Cursor to home defined above
    112  : 3 : "Shift Ctrl F1"  : 83 : " Function 1"
    113  : 0 : "F2"             : 84 : " Function 2"
    113  : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
    114  : 3 : "Shift Ctrl F3"  : 85 : " Function 3"
    115  : 3 : "Shift Ctrl F4"  : 86 : " Function 4"
    117  : 3 : "Shift Ctrl F6"  : 88 : " Function 6"
    118  : 3 : "Shift Ctrl F7"  : 89 : " Function 7"
    119  : 3 : "Shift Ctrl F8"  : 90 : " Function 8"
    120  : 3 : "Shift Ctrl F9"  : 91 : " Function 9"<B>Finding Forms 10g Patchsets</B>
    Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
    In "Search by", select Product or Family. Enter "Developer Forms" in the box.
    Then click the Release choices, and select "iAS 10.1.2.3"
    Patch Type should be "Patchset/Minipack"
    Platform or Language should be "Microsoft Windows (32-bit)"
    Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
    https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
    ]5983622
    Edited 2008-12-12 to add a link to Oracle Note 559067.1  and added the fmrweb.res file listing.
    Edited 2008-10-28 to change text format to work better within new forum format
    Edited 2008-7-7 to add patchset search information.
    Edited 2008-4-21 to modify information.
    Edited 2008-3-6 to add information.
    Edited 2008-5-29 to update information.

    I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
    Two points, Steve:
    1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
    2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
    Do you have any idea what to do to solve the problem?
    Regards

  • Forms 10g Installation issue on windows 7 Professional service pack 1

    hi
    I am trying to install oracle forms 10g  64 bit windows 7 Professional service pack 1 ..
    Below are 2 files that i am using ..
    ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
    ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
    But it failed but the error is .. 
    Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.    Actual 6.1     Failed <<<<
    just wondering if there are any workaround ..

    Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7.  You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified.  You must have a My Oracle Support account to obtain the patch.
    Now, to your question - is there a workaround; the answer is yes.  There are known issues with this installer.  I'll list them and their workaround.
    1.  The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
    Workaround:  Right-click the Installer and select Properties.  Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for:  Windows XP SP3).
    2.  The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
    Workaround:  You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes.  See this Microsoft article for more information on changing VM settings.  http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
    This change will require you to restart your computer.  After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
    3.  The Oracle installer MUST be installed as an "Administrator". 
    Workaround:  Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab.  Click the "Run this program as an administrator" checkbox.
    4.  Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
    Run the Oracle installer and it should now install succesfully.
    Craig...

  • Problem with output from  report to excel, calling the report from form 10g

    Hi everyone, I'm having a problem generating a excel from a report, which is called from a form, I'm using Forms 10g. The problem is this: My report has a variable number of columns. These columns appear according to data obtained from the database, these columns are dates, In vesion 6 excel file generated shows the columns one after another starting in column A1 to column CP. I mean that the dates are correlative. But in version 10g the excel file generated shows the same report starting in column A to column T, only shows the 20 dates correlative corresponding to this columns, the rest of the dates are down the excel sheet in groups of 20 dates, it's something, the file in 6i grows across and in 10g grows down the excel sheet. The report (rdf file) is the same in 6i and 10g, I compiled the 6i version to obtain the 10g version. The excel sheet generated in 10g looks like the report was in pdf format, because PDF format, cuts the report in pages and the file grows down, if I generate the report in PDF format it has the same structure excel file in 10g has. I hope yo can help because I have days trying to solve this but I have no succes. If someone could help I could email the excel files generated in two versions. Here I put the code I use to generate the files in 6i and 10g. I have tried with DESFORMAT=SPREADSHEET in 10g but the result is the same. Thanks for your help. Greetings for all.
    Code for version 6i (Works Very well)
    PROCEDURE GUARDAREXCEL IS
    pl_id ParamList;
    nom_rep varchar2(20);
    cla_rep varchar2(20);
    cod_dis varchar2(4);
    nom_arch varchar2(100);
    fec date;
    BEGIN
    pl_id := Get_Parameter_List('tmpdata');
    IF NOT Id_Null(pl_id) THEN
    Destroy_Parameter_List( pl_id );
    END IF;
    pl_id := Create_Parameter_List('tmpdata');
    IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
    cod_dis := :BK_PARAMETROS.LI_COD_DIS;
    END IF;
    IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
    Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
    ELSE
    Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
    :BK_PARAMETROS.TI_COD_CLI:='%';
    END IF;
    IF :BK_PARAMETROS.CLAS_REP=1 THEN
    cla_rep := '001';
    ELSE
         IF :BK_PARAMETROS.CLAS_REP=2 THEN
              cla_rep := '002';
         ELSE
              IF :BK_PARAMETROS.CLAS_REP=3 THEN
              cla_rep := '003';
         ELSE
              cla_rep := '004';
         END IF;
         END IF;
    END IF;
    Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
    Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
    Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
    Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
    Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
    Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
    Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );
    select sysdate into fec from dual;
    IF :BK_PARAMETROS.TIPO_REP=1 THEN
         BEGIN
    nom_rep := 'tdvenrli1577.rep';
    nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
    END;
    ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
              BEGIN
              nom_rep := 'tdvenrli1578.rep';
              nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
              END;
    ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
         BEGIN
                        Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');           
              nom_rep := 'tdvenrli1576.rep';
              nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';      
              END;
    ELSE
              BEGIN
                        nom_rep := 'TDVENRLI1545.REP';
              nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
              END;
    END IF;
    --Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
    Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
    standard.commit;
    Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
    EXCEPTION WHEN Run_Product_Failure THEN
    message('Error');
    END;
    Code for version 10g
    PROCEDURE GUARDAREXCEL IS
    pl_id ParamList;
    nom_rep varchar2(20);
    cla_rep varchar2(20);
    cod_dis varchar2(4);
    nom_arch varchar2(100);
    fec date;
    --byt12122007.sn
    repid REPORT_OBJECT;
         vURL VARCHAR2(500);
         rep_status VARCHAR2(20);
         vJobID VARCHAR2(100);
         v_rep VARCHAR2(100);
    VAR NUMBER;
    w_name_repserv VARCHAR2(30);
    --byt1212007.en
    BEGIN
         --w_name_repserv:=F_OBTIENE_SERVREP;
    w_name_repserv:='repserv';     
    pl_id := Get_Parameter_List('mytmp_params');
    IF NOT Id_Null(pl_id) THEN
    Destroy_Parameter_List( pl_id );
    END IF;
    pl_id := Create_Parameter_List('mytmp_params');
    IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
         cod_dis := :BK_PARAMETROS.LI_COD_DIS;
    END IF;
    IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
    Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
    ELSE
    Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
    :BK_PARAMETROS.TI_COD_CLI:='%';
    END IF;
    IF :BK_PARAMETROS.CLAS_REP=1 THEN
    cla_rep := '001';
    ELSE
         IF :BK_PARAMETROS.CLAS_REP=2 THEN
              cla_rep := '002';
         ELSE
              IF :BK_PARAMETROS.CLAS_REP=3 THEN
              cla_rep := '003';
         ELSE
              cla_rep := '004';
         END IF;
         END IF;
    END IF;
    Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
    Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
    Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
    Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
    /*Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
    Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
    Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );*/
    select sysdate into fec from dual;
    IF :BK_PARAMETROS.TIPO_REP=1 THEN
    BEGIN
         repid := find_report_object('tdvenrli1577');
    --nom_rep := 'tdvenrli1577.rep';
    nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
    SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1577');
    END;
    ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
    BEGIN
         repid := find_report_object('tdvenrli1578');      
              --nom_rep := 'tdvenrli1578.rep';
              nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
              SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1578');
              END;
    ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
    BEGIN
         repid := find_report_object('tdvenrli1576');
                        Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');           
              --nom_rep := 'tdvenrli1576.rep';
              nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
              SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1576');     
              END;
    ELSE
    BEGIN
         repid := find_report_object('tdvenrli1545');
                        --nom_rep := 'TDVENRLI1545.REP';
              nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
              SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1545');     
              END;
    END IF;
    --Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
    --Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
    standard.commit;
    SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESNAME,nom_arch);
    SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
         SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
         SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, 'File');
         SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'DELIMITED');
         SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, w_name_repserv);
         SET_REPORT_OBJECT_PROPERTY(repid, REPORT_OTHER, 'paramform=no');
         v_rep := RUN_REPORT_OBJECT(repid, pl_id);
         rep_status := REPORT_OBJECT_STATUS(v_rep);
         WHILE rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED')     LOOP
              rep_status:= report_object_status(v_rep);
         END LOOP;
         IF rep_status = 'FINISHED' THEN
              vJobID := SUBSTR(v_rep, INSTR(v_rep, '_', -1)+1);
              vURL:='/reports/rwservlet/getjobid'||vJobID||'?'||'server='||w_name_repserv;
         END IF;
         WEB.SHOW_DOCUMENT(vURL, '_blank');
         IF NOT form_success THEN
              MESSAGE('Error: PL/SQL held against Button failed to execute');
              RAISE FORM_TRIGGER_FAILURE;
         END IF;
    /*Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
    EXCEPTION WHEN Run_Product_Failure THEN
    message('Error');*/
    END;

    There are two problems with your VI.  First, the basic logic of writing/appending to a file (Excel, TDMS, anything) should go something like this:  Open the file, position yourself at the end of the file, then, in the loop, acquire data and write it to the file until you are finished with data acquisition.  When you exit the acquire/write to file loop, then close the file.  In particular, the opening and the closing of the file should not be inside the loop.
    As others have pointed out, writing to Excel might not be optimal, particularly if you are acquiring data at a high rate (and would therefore be writing a lot of data). We actually use Excel in our data acquisition routine, mainly reading from a WorkSheet to get the parameters of a particular stimulus, but also writing the outcome of the response to the stimulus.  As it happens, our "acquisition rate" in this example is on the order of several samples per minute, so there's no problem using Excel (we also sample 16 channels of analog data at 1 KHz -- this gets written as a binary file).
    Second, if you really do want to use Excel, use the (existing) Excel file to which you want to append as the "template" argument of the New Report function.  Then use the Excel Get Last Row function to position yourself at "end of file", as noted above.
    Good Luck.
    Bob Schor

  • Forms 10g 10.1.2.3 with Microsoft Internet Explorer 8.0 in Win 7 64bit

    Hi all
    i am not able to open the application forms developed with forms 10g(10.1.2.3 ) in IE8.
    I am able to open it from the same client using google chrome or Firefox 3.6.
    JRE is 1.6 update 33.
    Does any body knows what should be the settings of IE8 , to make forms of with IE8.
    Is there any metalink how to document?
    Thank you in advance
    Kreshnik

    HI
    this is my formsweb.cfg. I think it is OK since i can magae to open the forms from FF 3.5 and Chrome.
    the problem is with IE 8 that is it certified for forms 10.1.2.3 version
    thanks and regards
    Kreshnik
    +# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $+
    +# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)+
    +# This section defines the Default settings. Any of them may be overridden in the+
    +# following Named Configuration sections. If they are not overridden, then the+
    +# values here will be used.+
    +# The default settings comprise two types of parameters: System parameters,+
    +# which cannot be overridden in the URL, and User Parameters, which can.+
    +# Parameters which are not marked as System parameters are User parameters.+
    +# SYSTEM PARAMETERS+
    +# -----------------+
    +# These have fixed names and give information required by the Forms+
    +# Servlet in order to function. They cannot be specified in the URL query+
    +# string. But they can be overridden in a named configuration (see below).+
    +# Some parameters specify file names: if the full path is not given,+
    +# they are assumed to be in the same directory as this file. If a path+
    +# is given, then it should be a physical path, not a URL.+
    +# USER PARAMETERS+
    +# ---------------+
    +# These match variables (e.g. %form%) in the baseHTML file. Their values+
    +# may be overridden by specifying them in the URL query string+
    +# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")+
    +# or by overriding them in a specific, named configuration (see below)+
    +[default]+
    +# System parameter: default base HTML file+
    baseHTML=basejpi.htm
    +# System parameter: base HTML file for use with JInitiator client+
    +#baseHTMLjinitiator=basejini.htm+
    baseHTMLjinitiator=basejpi.htm
    +# System parameter: base HTML file for use with Sun's Java Plug-In+
    baseHTMLjpi=basejpi.htm
    +# System parameter: delimiter for parameters in the base HTML files+
    HTMLdelimiter=%
    +# System parameter: working directory for Forms runtime processes+
    +# WorkingDirectory defaults to <oracle_home>/forms if unset.+
    workingDirectory=
    +# System parameter: file setting environment variables for the Forms runtime processes+
    envFile=default.env
    +# Forms runtime argument: whether to escape certain special characters+
    +# in values extracted from the URL for other runtime arguments+
    escapeparams=true
    +# Forms runtime argument: which form module to run+
    form=test.fmx
    +# Forms runtime argument: database connection details+
    userid=
    +# Forms runtime argument: whether to run in debug mode+
    debug=no
    +# Forms runtime argument: host for debugging+
    host=
    +# Forms runtime argument: port for debugging+
    port=
    +# Other Forms runtime arguments: grouped together as one parameter.+
    +# These settings support running and debugging a form from the Builder:+
    otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
    +# Sub argument for otherparams+
    buffer=no
    +# Sub argument for otherparams+
    debug_messages=no
    +# Sub argument for otherparams+
    array=no
    +# Sub argument for otherparams+
    obr=no
    +# Sub argument for otherparams+
    query_only=no
    +# Sub argument for otherparams+
    quiet=yes
    +# Sub argument for otherparams+
    render=no
    +# Sub argument for otherparams+
    record=
    +# Sub argument for otherparams+
    tracegroup=
    +# Sub argument for otherparams+
    log=
    +# Sub argument for otherparams+
    term=
    +# HTML page title+
    pageTitle=Oracle Application Server Forms Services
    +# HTML attributes for the BODY tag+
    HTMLbodyAttrs=
    +# HTML to add before the form+
    HTMLbeforeForm=
    +# HTML to add after the form+
    HTMLafterForm=
    +# Forms applet parameter: URL path to Forms ListenerServlet+
    serverURL=/forms/lservlet
    +# Forms applet parameter+
    codebase=/forms/java
    +# Forms applet parameter+
    imageBase=DocumentBase
    +# Forms applet parameter+
    width=750
    +# Forms applet parameter+
    height=600
    +# Forms applet parameter+
    separateFrame=false
    +# Forms applet parameter+
    splashScreen=
    +# Forms applet parameter+
    background=
    +# Forms applet parameter+
    lookAndFeel=Oracle
    +# Forms applet parameter+
    colorScheme=teal
    +# Forms applet parameter+
    logo=
    +# Forms applet parameter+
    restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
    +# Forms applet parameter+
    formsMessageListener=
    +# Forms applet parameter+
    recordFileName=
    +# Forms applet parameter+
    serverApp=default
    +# Forms applet archive setting for JInitiator+
    archive_jini=frmall_jinit.jar
    +# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)+
    archive=frmall.jar,pdfviewer.jar
    +# Number of times client should retry if a network failure occurs. You should+
    +# only change this after reading the documentation.+
    networkRetries=0
    +# Page displayed to Netscape users to allow them to download Oracle JInitiator.+
    +# Oracle JInitiator is used with Windows clients.+
    +# If you create your own page, you should set this parameter to point to it.+
    jinit_download_page=/forms/jinitiator/us/jinit_download.htm
    +# Parameter related to the version of JInitiator+
    jinit_classid=clsid:CAFECAFE-0013-0001-0026-ABCDEFABCDEF
    +# Parameter related to the version of JInitiator+
    jinit_exename=jinit.exe#Version=1,3,1,26
    +# Parameter related to the version of JInitiator+
    jinit_mimetype=application/x-jinit-applet;version=1.3.1.26
    +# Page displayed to users to allow them to download Sun's Java Plugin.+
    +# Sun's Java Plugin is typically used for non-Windows clients.+
    +# (NOTE: you should check this page and possibly change the settings)+
    jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
    +# Parameter related to the version of the Java Plugin+
    +#jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA+
    jpi_classid=clsid:clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA
    +# Parameter related to the version of the Java Plugin+
    +#jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06+
    jpi_codebase=j2se16033.exe#Version=1,6,0,33
    +# Parameter related to the version of the Java Plugin+
    +#jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06+
    jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_33
    +# EM config parameter+
    +# Set this to "1" to enable Enterprise Manager to track Forms processes+
    em_mode=0
    +# Single Sign-On OID configuration parameter+
    oid_formsid=%OID_FORMSID%
    +# Single Sign-On OID configuration parameter+
    oracle_home=E:\oracle\FRHome_1
    +# Single Sign-On OID configuration parameter+
    formsid_group_dn=%GROUP_DN%
    +# Single Sign-On OID configuration parameter: indicates whether we allow+
    +# dynamic resource creation if the resource is not yet created in the OID.+
    ssoDynamicResourceCreate=true
    +# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false+
    ssoErrorUrl=
    +# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.+
    ssoCancelUrl=
    +# Single Sign-On parameter: indicates whether the url is protected in which+
    +# case mod_osso will be given control for authentication or continue in+
    +# the FormsServlet if not. It is false by default. Set it to true in an+
    +# application-specific section to enable Single Sign-On for that application.+
    ssoMode=false
    +# The parameter allow_debug determines whether debugging is permitted.+
    +# Administrators should set allow_debug to "true" if servlet+
    +# debugging is required, or to provide access to the Forms Trace Xlate utility.+
    +# Otherwise these activities will not be allowed (for security reasons).+
    allow_debug=false
    +# Parameter which determines whether new Forms sessions are allowed.+
    +# This is also read by the Forms EM Overview page to show the+
    +# current Forms status.+
    allowNewConnections=true
    +# EndUserMonitoring+
    +# EndUserMonitoringEnabled parameter+
    +# Indicates whether EUM/Chronos integration is enabled+
    EndUserMonitoringEnabled=
    +# EndUserMonitoringURL+
    +# indicates where to record EUM/Chronos data+
    EndUserMonitoringURL=
    +# Example Named Configuration Section+
    +# Example 1: configuration to run forms in a separate browser window with+
    +# "generic" look and feel (include "config=sepwin" in the URL)+
    +# You may define your own specific, named configurations (sets of parameters)+
    +# by adding special sections as illustrated in the following examples.+
    +# Note that you need only specify the parameters you want to change. The+
    +# default values (defined above) will be used for all other parameters.+
    +# Use of a specific configuration can be requested by including the text+
    +# "config=<your_config_name>" in the query string of the URL used to run+
    +# a form. For example, to use the sepwin configuration, your could issue+
    +# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".+
    +[sepwin]+
    separateFrame=True
    lookandfeel=Generic
    +# Example Named Configuration Section+
    +# Example 2: configuration forcing use of the Java Plugin in all cases (even if+
    +# the client browser is on Windows)+
    +[jpi]+
    baseHTMLJInitiator=basejpi.htm
    +# Example Named Configuration Section+
    +# Example 3: configuration running the Forms ListenerServlet in debug mode+
    +# (debug messages will be written to the servlet engine's log file).+
    +[debug]+
    serverURL=/forms/lservlet/debug
    +[dmais]+
    separateFrame=True
    lookandfeel=oracle
    colorscheme=blaf
    workingDirectory=E:\developm\dmais\forms
    form=dmaisnav.fmx
    width=900
    height=650
    +# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with+
    +# DS but not AS and is also available for download from OTN.+
    +[webutil]+
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=oracle

  • Forms 10G – Replacing Oracle Logo in Menu Bar

    Hello:
    Forms 10G – Replacing Oracle Logo in Menu Bar
    We use “lookAndFeel=oracle” which gives Oracle Logo in the Manu Bar at top right corner.
    What is the simplest way to replace this with our own logo?
    Thanks

    Here you go. (foroms.conf, formsweb.cfg)
    Forms.conf
    # $Id: forms.conf 22-nov-2004.03:29:38 osingh Exp $
    # Name
    # forms.conf
    # Purpose
    # Apache mod_oc4j and mod_jserv configuration file for Forms Services.
    # This file should be included into the Oracle Apache HTTP Listener
    # configuration file (typically by adding an include statement to the
    # oracle_apache.conf file)
    # Remarks
    # If Forms is to be used with JServ, the jserv.properties file needs editing
    # to add the "forms" servlet zone with properties file forms.properties
    # Notes
    # Virtual paths: We use AliasMatch when defining virtual paths for
    # security reasons (prevents directory browsing).
    # Virtual path mapping for Forms Java jar and class files (codebase)
    AliasMatch ^/forms/java/(..*) "E:\oracle\FRHome_1/forms/java/$1"
    # Virtual path for JInitiator downloadable executable and download page
    AliasMatch ^/forms/jinitiator/(..*) "E:\oracle\FRHome_1/jinit/$1"
    # Virtual path for runform.htm (used to run a form for testing purposes)
    AliasMatch ^/forms/html/(..*) "E:\oracle\FRHome_1/tools/web/html/$1"
    # Virtual path for webutil
    AliasMatch ^/forms/webutil/(..*) "E:\oracle\FRHome_1/forms/webutil/$1"
    # Configuration for JServ (if mod_jserv.c is available and not mod_oc4j.c)
    <IfModule mod_jserv.c>
    # Only configure for JServ if mod_oc4j is NOT available:
    <IfModule !mod_oc4j.c>
    # Virtual path mapping for FormsServlet and ListenerServlet.
    # Purpose: paths to invoke the servlets should be /forms/frmservlet
    # and /forms/lservlet respectively.
    # We map frmservlet to servlet.frm, and lservlet to servlet.frml.
    # The apJServAction directives (below) will then remap those.
    AliasMatch ^/forms/frmservlet(.*) "/servlet.frm"
    AliasMatch ^/forms/lservlet(.*) "/servlet.frml"
    ApJServMount /forms/servlet /forms
    # Let the servlets be called by file extension (e.g /servlet.frm)
    ApJServAction .frm /forms/servlet/frmservlet
    ApJServAction .frml /forms/servlet/lservlet
    # Prevent access to the Forms Servlets by paths other than
    # /forms/frmservlet and /forms/lservlet.
    # 1. Prevent access via the .frm and .frml file extensions:
    <LocationMatch ^.*\.frm.*>
    order deny,allow
    deny from all
    </LocationMatch>
    # 2. Stop access by class (by paths like
    # /forms/servlet/oracle.forms.servlet.FormsServlet)
    <LocationMatch ^/forms/servlet/oracle\.forms.*>
    order deny,allow
    deny from all
    </LocationMatch>
    </IfModule>
    </IfModule>
    # Config. for OC4J
    <IfModule mod_oc4j.c>
    Oc4jMount /forms OC4J_BI_Forms
    Oc4jMount /forms/frmservlet OC4J_BI_Forms
    Oc4jMount /forms/frmservlet/* OC4J_BI_Forms
    Oc4jMount /forms/lservlet OC4J_BI_Forms
    Oc4jMount /forms/lservlet/* OC4J_BI_Forms
    </IfModule>
    formsweb.cfg
    # $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
    # formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
    # This section defines the Default settings. Any of them may be overridden in the
    # following Named Configuration sections. If they are not overridden, then the
    # values here will be used.
    # The default settings comprise two types of parameters: System parameters,
    # which cannot be overridden in the URL, and User Parameters, which can.
    # Parameters which are not marked as System parameters are User parameters.
    # SYSTEM PARAMETERS
    # These have fixed names and give information required by the Forms
    # Servlet in order to function. They cannot be specified in the URL query
    # string. But they can be overridden in a named configuration (see below).
    # Some parameters specify file names: if the full path is not given,
    # they are assumed to be in the same directory as this file. If a path
    # is given, then it should be a physical path, not a URL.
    # USER PARAMETERS
    # These match variables (e.g. %form%) in the baseHTML file. Their values
    # may be overridden by specifying them in the URL query string
    # (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
    # or by overriding them in a specific, named configuration (see below)
    [default]
    # System parameter: default base HTML file
    baseHTML=base.htm
    # System parameter: base HTML file for use with JInitiator client
    baseHTMLjinitiator=basejini.htm
    # System parameter: base HTML file for use with Sun's Java Plug-In
    baseHTMLjpi=basejpi.htm
    # System parameter: delimiter for parameters in the base HTML files
    HTMLdelimiter=%
    # System parameter: working directory for Forms runtime processes
    # WorkingDirectory defaults to <oracle_home>/forms if unset.
    workingDirectory=
    # System parameter: file setting environment variables for the Forms runtime processes
    envFile=default.env
    # Forms runtime argument: whether to escape certain special characters
    # in values extracted from the URL for other runtime arguments
    escapeparams=true
    # Forms runtime argument: which form module to run
    form=test.fmx
    # Forms runtime argument: database connection details
    userid=
    # Forms runtime argument: whether to run in debug mode
    debug=no
    # Forms runtime argument: host for debugging
    host=
    # Forms runtime argument: port for debugging
    port=
    # Other Forms runtime arguments: grouped together as one parameter.
    # These settings support running and debugging a form from the Builder:
    otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
    # Sub argument for otherparams
    buffer=no
    # Sub argument for otherparams
    debug_messages=no
    # Sub argument for otherparams
    array=no
    # Sub argument for otherparams
    obr=no
    # Sub argument for otherparams
    query_only=no
    # Sub argument for otherparams
    quiet=yes
    # Sub argument for otherparams
    render=no
    # Sub argument for otherparams
    record=
    # Sub argument for otherparams
    tracegroup=
    # Sub argument for otherparams
    log=
    # Sub argument for otherparams
    term=
    # HTML page title
    # HTML attributes for the BODY tag
    HTMLbodyAttrs=
    # HTML to add before the form
    HTMLbeforeForm=
    # HTML to add after the form
    HTMLafterForm=
    # Forms applet parameter: URL path to Forms ListenerServlet
    serverURL=/forms/lservlet
    # Forms applet parameter
    codebase=/forms/java
    # Forms applet parameter
    imageBase=DocumentBase
    # Forms applet parameter
    width=750
    # Forms applet parameter
    height=600
    # Forms applet parameter
    separateFrame=false
    # Forms applet parameter
    splashScreen=
    # Forms applet parameter
    background=
    # Forms applet parameter
    lookAndFeel=Oracle
    # Forms applet parameter
    colorScheme=teal
    # Forms applet parameter
    logo=
    # Forms applet parameter
    restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,HTMLafterForm,log,allow_debug,allowNewConnections
    # Forms applet parameter
    formsMessageListener=
    # Forms applet parameter
    recordFileName=
    # Forms applet parameter
    serverApp=default
    # Forms applet archive setting for JInitiator
    archive_jini=frmall_jinit.jar
    # Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
    archive=frmall.jar
    # Number of times client should retry if a network failure occurs. You should
    # only change this after reading the documentation.
    networkRetries=0
    # Page displayed to Netscape users to allow them to download Oracle JInitiator.
    # Oracle JInitiator is used with Windows clients.
    # If you create your own page, you should set this parameter to point to it.
    jinit_download_page=/forms/jinitiator/us/jinit_download.htm
    # Parameter related to the version of JInitiator
    jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
    # Parameter related to the version of JInitiator
    jinit_exename=jinit.exe#Version=1,3,1,22
    # Parameter related to the version of JInitiator
    jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
    # EM config parameter
    # Set this to "1" to enable Enterprise Manager to track Forms processes
    em_mode=1
    # Single Sign-On OID configuration parameter
    oid_formsid=%OID_FORMSID%
    # Single Sign-On OID configuration parameter
    oracle_home=E:\oracle\FRHome_1
    # Single Sign-On OID configuration parameter
    formsid_group_dn=%GROUP_DN%
    # Single Sign-On OID configuration parameter: indicates whether we allow
    # dynamic resource creation if the resource is not yet created in the OID.
    ssoDynamicResourceCreate=true
    # Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
    ssoErrorUrl=
    # Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
    ssoCancelUrl=
    # Single Sign-On parameter: indicates whether the url is protected in which
    # case mod_osso will be given control for authentication or continue in
    # the FormsServlet if not. It is false by default. Set it to true in an
    # application-specific section to enable Single Sign-On for that application.
    ssoMode=false
    # The parameter allow_debug determines whether debugging is permitted.
    # Administrators should set allow_debug to "true" if servlet
    # debugging is required, or to provide access to the Forms Trace Xlate utility.
    # Otherwise these activities will not be allowed (for security reasons).
    allow_debug=false
    # Parameter which determines whether new Forms sessions are allowed.
    # This is also read by the Forms EM Overview page to show the
    # current Forms status.
    allowNewConnections=true
    # EndUserMonitoring
    # EndUserMonitoringEnabled parameter
    # Indicates whether EUM/Chronos integration is enabled
    EndUserMonitoringEnabled=
    # EndUserMonitoringURL
    # indicates where to record EUM/Chronos data
    EndUserMonitoringURL=
    # Example Named Configuration Section
    # Example 1: configuration to run forms in a separate browser window with
    # "generic" look and feel (include "config=sepwin" in the URL)
    # You may define your own specific, named configurations (sets of parameters)
    # by adding special sections as illustrated in the following examples.
    # Note that you need only specify the parameters you want to change. The
    # default values (defined above) will be used for all other parameters.
    # Use of a specific configuration can be requested by including the text
    # "config=<your_config_name>" in the query string of the URL used to run
    # a form. For example, to use the sepwin configuration, your could issue
    # a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
    [sepwin]
    separateFrame=True
    lookandfeel=Generic
    # Example Named Configuration Section
    # Example 2: configuration forcing use of the Java Plugin in all cases (even if
    # the client browser is on Windows)
    [jpi]
    baseHTMLJInitiator=basejpi.htm
    # Example Named Configuration Section
    # Example 3: configuration running the Forms ListenerServlet in debug mode
    # (debug messages will be written to the servlet engine's log file).
    [debug]
    serverURL=/forms/lservlet/debug
    # Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
    # DS but not AS and is also available for download from OTN.
    [webutil]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=oracle
    [devBala]
    envFile=E:\Khamel\conf\devBala.env
    WIDTH=832
    HEIGHT=662
    pageTitle=Khameleon DEV-Bala Environment
    separateFrame=True
    splashScreen=No
    Background=No
    #lookAndFeel=oracle
    colorScheme=BLAF
    form=sylogin.fmx
    logo=/ksfiles/kham_log.gif
    [devBala1]
    envFile=E:\Khamel\conf\devBala.env
    WIDTH=1000
    HEIGHT=850
    #pageTitle=Khameleon DEV-Bala1 Environment
    separateFrame=True
    splashScreen=/ksfiles/Khameleon.gif
    Background=/ksfiles/Khameleon1.gif
    #lookAndFeel=oracle
    colorScheme=BLAF
    form=sylogin.fmx
    logo=/icons/kham_log.gif

Maybe you are looking for

  • Script to paste multiple text to respective x,y coordinate

    i need to formulate a script indesign, where upon pasting multiple texts or textframes, they will be pasted at their respective coordinates x and y with reference to margin or the zero point, I have read the indesign javascript reference, but i could

  • Improve The Current Implementation Of A Simple JQuery Filtering Engine

    The filtering option on my site appears to be behaving erratically, and not returning the closest result (i.e. items that best match the set filters), but rather "generalising" across the board. I think that this is down to the manner in which I have

  • Performance of File Adapter

    Hi Experts, Many of the Messages are failed in File Adapter that is in the Module. We found it is due to heavy load. How to improve performance of File Adapter. How to check the Thread Count for the File Adapter. What are the parameters i need to cha

  • How to aggregate a column based date column (for weekly single row)?

    How to aggregate a column based date column (for weekly single row)?

  • Why cant I properly attach images

    In Eudora for the Mac, Windows, Netscape, Microsoft Outlook 2003 (Windows) and such I could attach image files (without them showing up in the body of the message). However with Mail, I cannot do this. Everytime I attach a image using Mail, it always