Runtime Error : ASSERTION_FAILED while resubmit the SC to create FOD
Hi
We are using SRM 5.00 classic scenario.
When i am clicking on resubmit button to create follow on document getting
RUNTIME ERROR : ASSERTION_FAILED
Termination occurred in the ABAP program "CL_BBP_BS_MAP_SC2RQ===========CP" -
in "MAP_DELIVERY_ADDRESS".
The main program was "SAPLBBP_MON_SC ".
In the source code you have the termination point in line 20
of the (Include) program "CL_BBP_BS_MAP_SC2RQ===========CM00J".
Please suggest what should i do ?
Thanks and Regards
Ruma Paul.
Hi Ruma,
Please check the following OSS Notes:
Note 1169451 - ASSERTION_FAILED: Shopping stuck in Error in transmission
Note 980296 - ASSERTION_FAILED dump upon resubmitting the shopping cart.
Note 996674 - Check status of shopping cart raise short dump
Note 1027966 - ASSERTION_FAILED dump for shopping cart items in spool
Thanks,
Pradeep
Similar Messages
-
Runtime Error : ASSERTION_FAILED while clicking on shop button to create SC
Hi Experts.
We are using SRM 7.0
When i am clicking on shop button to create shopping cart getting
RUNTIME ERROR : ASSERTION_FAILED
Termination occurred in the ABAP program "/SAPSRM/CL_CH_WD_GAF_FACTORY==CP" -
in "SET_GAF_PROVIDER".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 29.
Please suggest what should I do ?
Thanks and Regards
Bumhwan ohHi Venkatesh.
Thanks for your reply.
But Note 1341605 has nothing to do with what we are discussing.
My problem is why runtime error result when I click Shop button in Employee Self-Service.
Here is source code in method SET_GAF_PROVIDER.
IF io_fpm_gaf IS NOT BOUND. "SRM 6.0 coding (without FPM)
Get Class Name from explicit configuration (stored in mapped context)
lo_context_node = io_wd_context_node->get_child_node( name = 'CONFIGURATION_NODE' ).
lo_context_element = lo_context_node->get_element( ).
lo_context_element->get_attribute(
EXPORTING
name = `CLASS_NAME`
IMPORTING
value = lv_class_name ).
CATCH SYSTEM-EXCEPTIONS create_object_class_not_found = 4.
CREATE OBJECT lo_gaf_provider
TYPE
(lv_class_name)
EXPORTING
io_wd_context_node = io_wd_context_node.
ENDCATCH.
" Cause: The class specified in the TYPE addition does not exist
" [..] handle exception / abort use case
ASSERT FIELDS 'GAF Provider Class Name is not valid' lv_class_name
CONDITION sy-subrc = 0. -
Runtime error assertion_failed
hello,
i am getting a runtime error 'assertion_failed' while activating the transformations.
it says the assert condition was violated. i am attaching the error message here.
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
i need help regarding this.
thanks in advance.
muralikHello MuraliK,
Plz apply note :998730.
U need to check RSTRANRULE table with certain combination and delete inconsistent records.
-- Plz assign points if helpful --
Regards,
Mainak -
Getting Error ASSERTION_FAILED while activating transformation.
Hi Experts,
I am getting an error "The ASSERT condition was violated" while activating a transformation in BI. I applied SAP NOTE 1137447 and I am still getting this error given below.
Runtime Errors ASSERTION_FAILED
Date and Time 09.10.2009 16:53:20
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
Trigger Location of Runtime Error
Program CL_RSTRAN_FOBU_APPL===========CP
Include CL_RSTRAN_FOBU_APPL===========CM007
Row 37
Module type (METHOD)
Module Name GET_CODE
Line SourceCde
7 l_formula_id_32 TYPE sfbeid,
8 l_s_fobu TYPE rsfob_s_formula,
9 l_r_formula TYPE REF TO cl_foev_formula.
10
11
12 IF p_r_formula IS BOUND AND
13 p_mode is not initial.
14 CALL METHOD cl_rsar_formulas=>reset_formula_foev_object
15 EXPORTING
16 i_formex = p_formex
17 i_objvers = p_objvers
18 i_r_formula = p_r_formula
19 EXCEPTIONS
20 no_entry = 1
21 invalid = 2
22 OTHERS = 3.
23 ASSERT sy-subrc = 0. "invalid call
24
25 ENDIF.
26
27 CALL METHOD cl_rsar_formulas=>get_formula_foev_object
28 EXPORTING
29 i_formex = p_formex
30 i_objvers = p_objvers
31 RECEIVING
32 r_r_formula = l_r_formula
33 EXCEPTIONS
34 no_entry = 1
35 invalid = 2
36 OTHERS = 3.
>>>>> ASSERT sy-subrc = 0. "invalid call
38
39
40 l_r_formula->compile( EXPORTING i_structure_prefix = 'SOURCE_FIELDS'
41 IMPORTING e_abap_formula = e_t_abap_source ).
42
43 ENDMETHOD.
Kindly help me.
Thanks in advance,
With Kind Regards,
Kannan JagadeesanTry applying the following OSS Notes:
[OSS Note 1050275 - ASSERTION_FAILED in CL_RSTRAN_FOBU_APPL->GET_CODE|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1050275] (relevant to prior to BI 7 SP14)
[OSS Note 1115923 - Check or transfer of empty formulas causes runtime error|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1115923] (relevant to prior to BI 7 SP17). -
System Error 998 While loading the Labview Run-Time Engine
Hello.
I have a DLL made with LV 7.1 I run the dll using a C compiler and works great in WINXP, but cannot run in Win2K. Error is:
"System error 998 while loading the Labview Run-Time Engin(c:\program
files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
READVOLTAGE requires a version 7.1 (or compatible) Labview Runtime
Engine. Please contact the vendor of READVOLTAGE to correct this
problem"
READVOLTAGE is my function inside the dll. The runtime is already
installed. I tried it in another WINXP running machine and works fine.This is actually a Microsoft bug with statically loaded DLLs. There are a couple of workarounds for it, and I have included two links below to posts that address this issue:
Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC
I get error 998 when calling a LabVIEW buildt DLL from MSVC++
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments -
Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack: at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
SebHi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error occurred while packaging the application: Android-x86
Hello,
I tried to export an existing Android-ARM to Android-x86:
This application uses to 2 ANE for In-App purchases. One for iOS and another one for Android. I repackaged the Android ANE file to be compatible with Android-x86 and I also add the new Flash Builder "-arch" with value "x86" and place it before "-storetype".
Error occurred while packaging the application:
output file is not writable
usage:
adt -checkstore SIGNING_OPTIONS
adt -certificate -cn <name> ( -ou <org-unit> )? ( -o <org-name> )? ( -c <country> )? ( -validityPeriod <years> )? ( 1024-RSA | 2048-RSA ) <pfx-file> <password>
adt -help
adt -migrate SIGNING_OPTIONS ( <air-file-in> | <airn-file-in> ) <output-file>
adt -package SIGNING_OPTIONS ( -target air )? <output-package> ( <app-desc> FILE_OPTIONS | <input-package> )
adt -package SIGNING_OPTIONS -target airn <output-package> ( <app-desc> FILE-AND-PATH-OPTIONS | <input-package> )
adt -package -target ( apk | apk-debug | apk-emulator | apk-captive-runtime ) ( CONNECT_OPTIONS? | LISTEN_OPTIONS? ) ( -airDownloadURL <url> )? ( ARCH_OPTIONS )? SIGNING_OPTIONS <output-package> ( <app-desc> PLATFORM-SDK-OPTION? FILE-AND-PATH-OPTIONS | <input-package> PLATFORM-SDK-OPTION? )
adt -package -target ( ipa-test | ipa-debug | ipa-app-store | ipa-ad-hoc | ipa-test-interpreter | ipa-debug-interpreter | ipa-test-interpreter-simulator | ipa-debug-interpreter-simulator ) ( CONNECT_OPTIONS? | LISTEN_OPTIONS? ) ( -sampler )? ANE_LINK_OPTIONS? AOT_MODE_OPTIONS? SIGNING_OPTIONS <output-package> ( <app-desc> PLATFORM-SDK-OPTION? FILE-AND-PATH-OPTIONS | <input-package> PLATFORM-SDK-OPTION? )
adt -package SIGNING_OPTIONS? -target native SIGNING_OPTIONS? <output-package> ( <app-desc> FILE-AND-PATH-OPTIONS | <input-package> )
adt -package SIGNING_OPTIONS? -migrate SIGNING_OPTIONS -target native SIGNING_OPTIONS? <output-package> <app-desc> FILE_OPTIONS PATH-OPTION
adt -package SIGNING_OPTIONS? -target bundle SIGNING_OPTIONS? <output-package> ( <app-desc> FILE-AND-PATH-OPTIONS | <input-package> )
adt -package SIGNING_OPTIONS? -target ane <output-package> <ext-desc> ANE_OPTIONS
adt -prepare <airi-file> <app-desc> FILE_AND_PATH_OPTIONS
adt -sign SIGNING_OPTIONS ( -target ( air | airn | ane ) )? ( <airi-file> | <unsigned-ane-file> ) <output-file>
adt -devices PLATFORM-OPTION PLATFORM-SDK-OPTION?
adt -installRuntime PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION? ( -package <apk-file> )?
adt -installApp PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION? -package <apk-file | ipa-file>
adt -uninstallRuntime PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION?
adt -uninstallApp PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION? -appid <app-id>
adt -launchApp { PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION? ( -debuggerPort port )? -appid <app-id> }
adt -runtimeVersion PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION?
adt -appVersion PLATFORM-OPTION PLATFORM-SDK-OPTION? DEVICE-OPTION? -appid <app-id>
adt -version
SIGNING_OPTIONS : -storetype <type> ( -keystore <store> )? ( -storepass <pass> )? ( -alias <aliasName> )? ( -keypass <pass> )? ( -providerName <name> )? ( -tsa <url> )? ( -provisioning-profile <profile> )?
FILE_OPTIONS : <fileOrDir>* ( ( -C <dir> <fileOrDir>+ ) | ( -e <file> <path> ) )*
ARCH_OPTIONS : -arch (armv7 | x86)
CONNECT_OPTIONS : -connect <host>
LISTEN_OPTIONS : -listen <port>
ANE_LINK_OPTIONS : -hideAneLibSymbols ( yes | no )
ANE_OPTIONS : -swc <swc> ( -platform <name> (-platformoptions <file>)? <fileOrDir>* ( -C <dir> <fileOrDir>+ )* )*
FILE-AND-PATH-OPTIONS: ( PATH-OPTION | FILE-OPTIONS ) FILE-AND-PATH-OPTIONS?
PATH-OPTION : -extdir <dir>
PLATFORM-OPTION : -platform (android | ios)
PLATFORM-SDK-OPTION : -platformsdk <platform-sdk-home-dir>
DEVICE-OPTION : -device ( deviceID | ios-simulator )
AOT_MODE_OPTIONS : -useLegacyAOT ( yes | no )Hi Nimisha1,
I tried with both AIR 14.0 final release and also 14.0.125.
I have a Mac (last version OS).
With -arch armv7 I got the same error !
With command line works !
See the screenshoot of FB 4.7 customize launch:
See the screenshoot of FB export error: -
System error 999 while loading the Labview Run-Time Engin
Bonjour à tous,
J’ai un PC avec un Runtime LV71.1 qui me retourne l’erreur suivante. Je ne trouve pas d’info sur cette erreur. Une Idée sur la cause ?
System error 999 while loading the Labview Run-Time Engin(c:\program files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
Luc Desruelle | Voir mon profil | LabVIEW Code & blog
Co-auteur livre LabVIEW : Programmation et applications
CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW
Résolu !
Accéder à la solution.Bonjour Maxime, merci pour ta réponse qui est très intéressante. Le soft est en LV7.1.1 est fonctionne depuis plusieurs années. Le PC est chez un client, dans un pays très « hostile », je n’ai donc pas accès à ce dernier. Un superviseur local m’a fait le retour qu’après redémarrage du PC ce dernier indiquait un problème, avec photo pour descriptif. Je n’ai pas plus d’info pour le moment. Je viens donc de demander un CHKDSK c: /F
Luc Desruelle | Voir mon profil | LabVIEW Code & blog
Co-auteur livre LabVIEW : Programmation et applications
CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW -
Been struggling to resolve this error since yesterday in Flash Builder 4.7 packaging an app for iOS.
Error occurred while packaging the application:
Exception in thread "Main Thread" java.lang.UnsatisfiedLinkError: Can't load library: C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot\lib\llvm.dll
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1706)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1004)
at adobe.abc.LLVMEmitter.loadJNI(LLVMEmitter.java:587)
at adobe.abc.LLVMEmitter.<clinit>(LLVMEmitter.java:597)
at com.adobe.air.ipa.AOTCompiler.generateExtensionsGlue(AOTCompiler.java:419)
at com.adobe.air.ipa.AOTCompiler.generateMachineBinaries(AOTCompiler.java:1790)
at com.adobe.air.ipa.IPAOutputStream.createIosBinary(IPAOutputStream.java:378)
at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:762)
at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:91)
at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:246)
at com.adobe.air.ADT.parseArgsAndGo(ADT.java:571)
at com.adobe.air.ADT.run(ADT.java:419)
at com.adobe.air.ADT.main(ADT.java:470)Update:
My previous proposed solution (of installing the 64-bit JRE) resulted in a different problem. After multiple attempts and restarts I was unable to work in the Flash Builder IDE as it became unresponsive on load. Each time I had to use Task Manager to close the application.
Apparent Solution:
Close all applications running in Windows
Uninstall all versions of JRE (Java Runtime Environment)
Uninstall Flash Builder 4.7
Reinstall Flash Builder 4.7 -
Runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN key word
Hi All,
I'm getting a runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN keyword in the below statement,
ASSIGN L_XVALUE(L_LENGTH) TO <TEXTLINE> TYPE 'C'. "see 581444
Here L_XVALUE is of type X with value 'ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S' , L_LENGTH is of type I with value 51 and <TEXTLINE> is of type C wih one character length .
Should I have to declare <TEXTLINE> as same as that of L_XVALUE ( type X ).
Thanks in Advance,
Sabu.Decalre <TEXTLINE> as type any.
-
Error encountered while executing the transform
My message failed at orchestration with the following error. Kindly help in finding the issue.
xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload(df91e55f-c6aa-914d-f042-acdb45bdcaf4)'.
The service instance will remain suspended until administratively resumed or terminated.
If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
InstanceId: cc8fac84-47dc-4d31-be15-80c9f86ffaac
Shape name: CodecoMapping
ShapeId: 32b0a92d-82f7-4b3a-8e22-a94b53bf2804
Exception thrown from: segment 1, progress 22
Inner exception: Error encountered while executing the transform Ibox.UNEDIFACT.CODECO.Orchestration.CodecoMap. Error:Transformation failed..
Exception type: XTransformationFailureException
Source: Microsoft.XLANGs.Engine
Target Site: Void ApplyInMemoryTransform(System.Type, Microsoft.XLANGs.RuntimeTypes.TransformMetaData, System.Object[], System.IO.Stream[])
The following is a stack trace that identifies the location where the exception occured
at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
at Microsoft.XLANGs.Core.Service.ApplyTransform(Type mapRef, Object[] outParams, Object[] inParams)
at Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload.segment1(StopConditions stopOn)
at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
Additional error information:
Exception has been thrown by the target of an invocation.
Exception type: TargetInvocationException
Source: mscorlib
Target Site: System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
The following is a stack trace that identifies the location where the exception occured
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver resolver)
at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, Stream output, XmlResolver resolver)
at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
Additional error information:
Attribute and namespace nodes cannot be added to the parent element after a text, comment, pi, or sub-element node has already been added.
Exception type: XslTransformException
Source: System.Data.SqlXml
Target Site: Void ThrowInvalidStateError(System.Xml.XPath.XPathNodeType)
The following is a stack trace that identifies the location where the exception occured
at System.Xml.Xsl.Runtime.XmlQueryOutput.ThrowInvalidStateError(XPathNodeType constructorType)
at System.Xml.Xsl.Runtime.XmlQueryOutput.ConstructInEnumAttrs(XPathNodeType rootType)
at System.Xml.Xsl.Runtime.XmlQueryOutput.WriteStartAttribute(String prefix, String localName, String ns)
at <xsl:template name="compiler:generated"> (36)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current, Double {http://schemas.microsoft.com/BizTalk/2003/var}var:v237,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v239, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v240, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v242, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v244,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v246, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v248, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v250, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v252,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v255, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v256, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v258, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v259,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v261, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v262, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v264, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v265,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v267, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v268, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v271, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v272,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v281, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v283, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v284, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v286,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v287, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v289, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v290, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v292,
String {http://schemas.microsoft.com/BizTalk/2003/var}var:v295)
at <xsl:template name="compiler:generated"> (12)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
at <xsl:template match="/s2:Root">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
at <xsl:template match="/">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
at Root(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
at Execute(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlSequenceWriter results)
at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer)
at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver documentResolver)Hi,
It is clearly an issue in your map. You can test your map out of Orchestration to make sure it is working.
"Exception has been thrown by the target of an invocation" is a very generic exception. you
need the inner exception to see the actual error. You can also try to test the map in the MapTester tool. It also shows also the inner exception. It's designed for BizTalk 2010 but with the .exe file you maybe also can test BizTalk 2006 maps,.
http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Internal Error occurred while calling the ProcessDPCommands API
We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous] -
An error occurred while preparing the installation. Try running the application again
I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install PROJECT:Install-846
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA PROJECT:InstallAssistant-476.8
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
*****This is where the timer starts saying “”About a minute remaining”*****
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
"Kernel Cache" = "/.IABootFiles/kernelcache";
"Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ****** Path: /Volumes/Install OS X Mavericks
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ****** Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
Thanks in advance!Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
First, my specs
Secondly, I am running an aftermarket 500 GB drive.
Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
And finally, here is the seeminly unavoidable error message.
Also, other things I've tried now are
installing it from the "show package contents area",
mounting said DMG and trying to install from there.
installing a package file called "upgradeos.pkg"
no luck. -
Azure Sql DB Export to Storage Container fails with "An error occurred while sending the request"
I've built a new VM from which I'm running PowerShell scripts to backup my databases. It had worked before on an old server for several months, and worked once on the new server, then I upgraded my Azure PowerShell cmdlets, and haven't been able to
get it to work again. The new version is 0.8.10.1.
Below is my source code, with sensitive stuff replaced with ?'s. When I display the $stctx and $dbctx, they seem to have reasonable values. I added the IP address of the server as an exception to the db firewall, and I've installed SQL Server
Mangement Studio and verified that I can connect to the database. I have a feeling there's something simple I've overlooked.
Here's are both error messages:
Start-AzureSqlDatabaseExport : An error occurred while sending the request.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Start-AzureSqlDatabaseExport : Error while copying content to a stream.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Here is the source code:
param($dbname)
if ($dbname -eq $null) {
write-host "Database code must be specified"
return
$password = "????"| ConvertTo-SecureString -asPlainText -Force
$servercredential = new-object System.Management.Automation.PSCredential("????", $password)
$dbsize = 1
$dbrestorewait = 10
$dbserver = "????"
$stacct = $dbname
$stkey = "????"
$stctx = New-AzureStorageContext -StorageAccountName $stacct -StorageAccountKey $stkey
$dbctx = New-AzureSqlDatabaseServerContext -ServerName $dbserver -Credential $servercredential
$dt = Get-Date
$timestamp = "_" + $dt.Year + "-" + ("{0:D2}" -f $dt.Month) + "-" + ("{0:D2}" -f $dt.Day) + "-" + ("{0:D2}" -f $dt.Hour) + ("{0:D2}" -f $dt.Minute)
$bkupname = $dbname + $timestamp + ".bacpac"
write-host "db context"
$dbctx
write-host "storage context"
$stctx
write-host "Backup $dbname to $bkupname"
Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx -StorageContainerName databasebackup -DatabaseName $dbname -BlobName $bkupnameHi Brad,
Mentioned script, with appropriate values, works on my system.
I'm able to export an Azure SQL database to blob storage. Am using version 0.8.10.1 of cmdlets, so this the same version mentioned in this problem description.
Can you please try using Add-AzureAccount and check if that helps. This is indicated in a different third-party blog.
http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1%29."http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1
Does it work from a different machine with newly downloaded credentials.
Does it work for a newly created database (so minimal database size).
If above do not work, we may require additional details like RequestID, StorageAccountName, ServerName so an MS ticket may be more appropriate.
Girish Prajwal -
I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
1. The C2WTS Windows service and C2WTS SharePoint service are both running.
2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support
Maybe you are looking for
-
Email Client Problem with HP Scan to Email Automator
Whenever I use the screen features on my HP Photosmart D110a printer and select scan to pc and then email PDF it opens HP scan just fine using the Email PDF Automator and the document scans perfectly but instead of being sent to Outlook 2011 it gets
-
How do you remove the "purchased" items in the "not on this iPhone" tab in the app store icon?
I want to permanently remove old deleted apps from the "purchased" list in the update section of the app store icon on my iPhone. These are apps that I tried and didn't like or didn't work or were useless or whatever. There does not seem to be any lo
-
I would like to be able to compile java programs on my laptop, but I can't get it to work. I have Windows XP running on an HP Pavilion laptop. So far I've uninstalled everything related to Java and reinstalled it so that I have the Java SE Developmen
-
how do i connect my ipodtouch 4 to tv
-
Converting dvd footage into Premiere
Hi everyone, I have a question and I really need helpp with this. I have the CS6 Mater Suite and I want to use dvd footage from films for use in doing film reviews. I know the tools are here somewhere, but I need help with ow to transfer the dvd to b