Runtime Error! Can't access RH9 HTML
Hello all.
I'm using RH9 and I was using the find and replace feature when the program froze. I had to "end task" and now I can't properly reopen RoboHelp HTML. When I go to open the program I get the Runtime Error! pop up, then the RoboHTML.exe - Application Error, and then after I click cancel I get the "unhandled win32 exception occurred in RoboHTML.exe [3796]. The funny thing is I can actually open my projects in RoboHelp as long as I don't hit No on the last pop up. The only thing is I need to leave the pop-up open or it will shutdown RoboHelp.
Any advice that can be offered would be more than welcome.
Thanks,
Mike
Hi Mike,
Sorry For delayed response, I am not sure if you are still facing the problem.
Can you please open you Event Viewer and Check the logs related to Robohelp.(Start>Run>Type "eventvwr")
That could suggest any faulty module causing the problem?
If you launch any other Project does the Error appear?
Can you make a Right Click to it and Select >Run as Administrator?
Thanks,
Anjaneai
Similar Messages
-
Runtime error--can someone please help me?!
ok so when i try to open my itunes (i have itunes 7) it opens but almost immediately a window pops up that says "software application has encountered a problem and needs to close. we are sorry for the inconvenience." it also says that they prepared an error report to send to microsoft about the problem. i've tried sending it but nothing has happened so now i click the "don't send" option. then a window pops up titled "Microsoft Visual C++ Runtime Library" and it says "Runtime Error! Program: C:\Program Files\iTunes\iTunes.exe This application has requested the Runtime terminate it in an unusual way. Please contact the application's support team for more information." i've tried uninstalling quicktime and then repairing iTunes but that doesn't fix it. i don't know what else to do. can someone please help me?!
NoClassDefFoundError happens because the JVM cannot find some class from your program, not because the OS cannot find your JVM (PATH regulates the latter, but not the former). JVM looks up classes in directories (or JAR files) specified through the -classpath option, like "java -classpath c:\myclasses MyMainClass". Read the online doc for the "java" launcher for more info.
-
Can anyone explain error: can not access a member .. with modifiers ""
Can anyone explain why this would occur:
javax.faces.FacesException: Can't instantiate class: 'com.package.MyBean'.. class com.package.MyBean : java.lang.IllegalAccessException: Class java.beans.Beans can not access a member of class com.package.MyBean with modifiers ""also if the class is not defined as public
myClass()
public myClass()
i got this when building my custom class loader and it took me sometime to figure this out since my editor generates my class templates I didn't even think to check something as basic as not having a public class - hopefully this saves someone else some trouble -
I have Windows Vista Premium (64) installed on my pc, never had this kind of problem before. I mostly use this computer only for itunes...
I tried to re-install itunes without success, now it gives a runtime error visual c++ runtime library , says to re-install itunes with error 7 (windows error 1114)
Please help me! thanks !I had the same problem. Use the uninstall feature to delete all of the Apple related programs that came with the recent download. There should be 3. Check the dates they were installed to be sure.
DO NOT DELETE any folders manually unless you want to lose playlists, etc.
Reboot your computer then reinstall. It worked like a charm for me! -
Runtime Error in VS2012 (Update4) LightSwitch HTML Client
I have a desktop (Silverlight) application, I upgraded the project to add the HTML Client. Now when I run the HTML Client, it shows this message box on the browser:
"The application could not be loaded. Please try refreshing the page. Failed to load model: failed to parse the model JSON string. Failure reason: syntax error."
I started my desktop application in VS2012 Update 2, and now it is in the Update 4. The interesting thing is that when I make new Project and then add HTML Client, I will not receive this error and it works fine.
It shows this error only on that specific project (Which I started on VS2012 Update2, later Update3 and now Update4) and that project is very big (more than 100 tables and screens), therefore I can not make that from scratch again.
I have to add HTML Client to my project. I really appreciate if someone can help me."The application could not be loaded. Please try refreshing the page. Failed to load model: failed to parse the model JSON string. Failure reason: syntax error."
Hi Keysen,
First you need install Microsoft.LightSwitch.Client.JavaScript.Runtime 2.5.2. This update can be downloaded from the NuGet Gallery, see:
http://www.nuget.org/packages/Microsoft.LightSwitch.Client.JavaScript.Runtime/
Because this issue is project specific, you can also turn the build output, in the
Options window, find Projects and Solutions >>
Build and Run. Find Diagnostic in the drop-down for MSBuild project build output verbosity. It will give detailed information why this happens.
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Phone number ported in error; can't access e-mails
I bought a new cell phone and requested that my cell number be ported. Instead of porting the cell number, our Verizon land line was ported in error. Shortly thereafter, our account was canceled, and our access to Verizon e-mail was terminated. Numerous calls to Verizon have been in vain. Any suggestions on how I can impress the importance of getting our e-mail account returned to us? My wife still has her Verizon cell phone, and Verizon has told me that they will re-port the number back to our home later this week. Will our e-mail accounts return?
Hi and welcome to the forums!
I would suggest you run a diagnostics test. This will register your device and create a report that can be sent to your vendor.
Thanks,
Bifocals
User Guide for your device
Diagnostic reports
About diagnostic reports
Diagnostic reports provide wireless configuration and connection information for your BlackBerry® device. If you cannot connect to the wireless
network or access services such as email messaging, your wireless service provider or administrator might ask you to run and submit a diagnostic
report. Your wireless service provider or administrator can use the report to help you troubleshoot the problem.
Run a diagnostic report
If you cannot connect to the wireless network or access services such as email messaging, your wireless service provider or administrator might
ask you to run and submit a diagnostic report. Your wireless service provider or administrator can use the report to help you troubleshoot the
issue.
1. On the Home screen or in a folder, click the Options icon.
2. Click Mobile Network.
3. Press the Menu key.
4. Click Diagnostics Test.
5. Press the Menu key.
6. Click Run.
View a diagnostic report
1. On the Home screen or in a folder, click the Options icon.
2. Click Mobile Network.
3. Press the Menu key.
4. Click Diagnostics Test.
5. Highlight a report.
6. Press the Menu key.
7. Click View Report.
Submit a diagnostic report
1. On the Home screen or in a folder, click the Options icon.
2. Click Mobile Network.
3. Press the Menu key.
4. Click Diagnostics Test.
5. Highlight a report.
6. Press the Menu key.
7. Click Email Report or PIN Report.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Runtime error in Catalog access
Hi, I've got a problem creating JSP render presentation. In my JDevloper enviroment everything is right, I pass the database and the catalog connection test and I see the presentation but, when I try to see it in web application... it doesn´t work.
If I try to do the same with a local Catalog and it works. What can I do?
Thanks you.Hi, I think that this isn't the problem because I've allready changed the BIDesigner settings. These are my settings:
- Run Settings -> Data Source Connection: valid connection (I tested it)
- Run Settings -> Catalog Type: Database
- Run Settings -> Catalog Connection & User: valid connection and user (I tested it)
It is a curious error, becouse when i see the renders in Jdeveloper design zone these are rendering correctly the error occurs only in runtime.
Thanks. -
Widget Browser Error - can't access widgets
Dreamweaver CS6 on a Windows 7 PC. Insert > Widgets reveals no widgets available. Widget Browser yields the following error:
Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://www.adobe.com/cfusion/exchange/exchangedwwidgetsfacade.cfc?wsdl)
Can access the URL referenced in the error manually via web browser, though it redirects to https://creative.adobe.com/addons. Have valid Adobe login. Adobe AIR is installed.
Really need widgets -- specifically the Spry Image Slideshow widget. Can this problem be easily resolved? Or is there another way to get/install the code for the Spry Image Slideshow widget?It is really frustrating.
Widget Browser is gone.
Have you tried loading the Add-ons panel for CS6?
Adobe Exchange
Or are you visiting the Add-ons web site?
https://creative.adobe.com/addons
Nancy O. -
Runtime error in WebDynpro - Access via 'NULL' object reference not possibl
Hi,
Structure of the CONTEXT in the VIEW::
WDSCREEN1
--> IMPORTING
--> S_KUNNR <- its a select option
--> EXPORTING
--> T_REPORT <- Which is table to hold the output data (with 4 fields)
In the context area i have root node (WDSCREEN1) and Sub nodes are IMPORTING and EXPORTING and child nodes as shown above. When i am referring them everything is fine except T_REPORT.
* Declaration
DATA: node TYPE REF TO if_wd_context_node,
node_exporting TYPE REF TO if_wd_context_node,
node_importing TYPE REF TO if_wd_context_node,
node_report TYPE REF TO if_wd_context_node,
node = wd_context->get_child_node( wd_this->wdctx_wdscreeb1 ).
node_exporting = node->get_child_node( wd_this->wdctx_exporting ).
node_importing = node->get_child_node( wd_this->wdctx_importing ).
* Bind the data to the context
node_report = node_exporting->get_child_node( name = 'T_REPORT` ).
node_report->bind_elements( lt_report ).
Its giving run time error 'Access via 'NULL' object reference not possible. ' when it comes to ' node_report->bind_elements( lt_report ).' I checked the content while debugging and found that it was initial. Not sure why Node_report is initial. all others have data.
node ->
node_exporting ->
node_importing ->
node_report ->http://wiki.sdn.sap.com/wiki/display/EP/PointersforTroubleshootingPortalRuntime+Errors
Hope this helps.
-Veer -
Fatal Error: can not access class javax.ejb._st_EJBHome;
I have a problem when I want to compile my Servlet. I want to
connect it to a EJB in 8i, but I get a problem with the class
mentioned in subject. It says: No source found; must be
compiled; because
org.omg.CORBA.portable.InputStream.read_estruct referenced by
javax.ejb._st_EJBHome has been changed.
What to do?? Can I find the source somewhere and put it in
properties? IF anyone has a quick answer I would be very
delighted...
//Alex.
nullalso if the class is not defined as public
myClass()
public myClass()
i got this when building my custom class loader and it took me sometime to figure this out since my editor generates my class templates I didn't even think to check something as basic as not having a public class - hopefully this saves someone else some trouble -
Hi,
I am getting the Following runtime error, can u please tell me the cause for this.
What happened? |
The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDR_CONTEXT_ELEMENT========CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Element Is Not (or No Longer) Bound to a Node
Error analysis |
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Element Is Not (or No Longer) Bound to a Node
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_WD_CONTEXT"
"CL_WDR_CONTEXT_ELEMENT========CP" or "CL_WDR_CONTEXT_ELEMENT========CM00I"
"IF_WD_CONTEXT_ELEMENT~GET_INDEX"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_CONTEXT_ELEMENT========CP" -
in "IF_WD_CONTEXT_ELEMENT~GET_INDEX".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 4
of the (Include) program "CL_WDR_CONTEXT_ELEMENT========CM00I".
Source Code Extract
Line
SourceCde
1
method if_wd_context_element~get_index .
2
3
if me->node is not bound.
>>>>>
raise exception type cx_wd_context exporting textid = cx_wd_context=>element_not_bound.
5
endif.
6
7
read table node->collection with key table_line = me transporting no fields.
8
assert sy-subrc = 0.
9
my_index = sy-tabix.
| 10|endmethod.
Thanks In advance.
MaryHi Mary
It is clearly saying the elements are not bound to the node and you are trying to access the node..
i.e. you have not binded internal table to the node.
Abhi -
Runtime error for ui element multipane
hello.
i have a question.
i implemented uielement multipane example in wda.
it worked very well in only first trying, but it occured a runtime error -that is Access via 'NULL' object reference not possible.- from second trying.
context -
hd <node>
attribute1 <hd of attribute>
attribute2 <hd of attribute>
item <hd of subnode>
attribute1 <item of attribute>
attribute2 <item of attribute>
below is source.
==========================================================
DATA: node_hd type ref to if_wd_context_node,
node_item type ref to if_wd_context_node,
itab_hd type wd_this->elements_hd,
stru_hd type wd_this->element_hd,
itab_item type wd_this->elements_item,
rt_auart type ref to data,
rt_vbeln type ref to data.
field-symbols: <fs_auart> type table,
<fs_vbeln> type table.
retrieve the data from the select option
rt_auart = wd_this->m_handler->get_range_table_of_sel_field( i_id = 'AUART' ).
assign it to a field symbol
assign rt_auart->* to <fs_auart>.
retrieve the data from the select option
rt_vbeln = wd_this->m_handler->get_range_table_of_sel_field( i_id = 'VBELN' ).
assign it to a field symbol
assign rt_vbeln->* to <fs_vbeln>.
retrieve that data from the database.
Normally it is suggested to encapsulate the data retrieval in a separate class.
For simplicity, the select statement has been implemented here.
select * into corresponding fields of table itab_hd
from vbak
where vbeln in <fs_vbeln>
and auart in <fs_auart>.
bind the data to the context
node_hd = wd_context->get_child_node( name = 'HD' ).
node_hd->bind_table( itab_hd ).
bind the data to the context
loop at itab_hd into stru_hd.
retrieve item_node object each sy-tabix
i could't get item_node object when sy-tabix is 1.
i hope to know why i can't get item_node object when sy-tabix is 1.
node_hd->get_child_node(
exporting
index = sy-tabix
name = 'ITEM'
receiving
child_node = node_item ).
when index = 1
node_item object is null.
why node_item object is null?????
i don't got it.
can sombody explain about it???
because of this matter, i can't acess frist node_item to insert value.
do you have a solving this matter?
select * into corresponding fields of table itab_item
from vbap
where vbeln = stru_hd-vbeln.
node_item->bind_table( itab_item ).
endloop.Hi Regina.
So you say if it is not declared as singleton it is created for each element. But
when I declare my subnode with cardinality 0..1 I face the same problem.
This is what I do:
I bind the elements to the parent node. Afterwards I loop all elements of the parent
node and try to get the subnode with element->get_child_node( ). If cardinality of
the sub node is 0..1 or 0..n the reference is NULL. If cardinality is 1..1 or 1..n the
reference is not initial.
At what step does the frameowrk create the subnode then?
Cheers,
Sascha -
Hi,
I've recently replaced my iphone 5 and I couldn't restore my data into my new phone, as it asked me to do the software upgrade on itunes in my computer. So, I did the itunes upgrade, which is now causing the Runtime error R6034. I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps. Plz advice, as how this runtime error can be fixed and at the sametime, I will still be able to restore my data into my new phone.Suresh14 wrote:
I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps.
Uninstalling & Re-installing iTunes will not delete your iTunes Library Data.
Do the following:
Uninstall from Windows the following four programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator. -
Runtime error when executing smartform in se38
hi,
i designed a smartform but when iam executing that using se38 am gettin runtime error.can anybody plz help me.
*& Report ZDEMOPRG
REPORT ZDEMOPRG.
DATA FNAME(30) TYPE C.
TABLES: LFA1.
DATA: BEGIN OF ITAB OCCURS 0.
INCLUDE STRUCTURE LFA1.
DATA: END OF ITAB.
SELECT-OPTIONS S_KUNNR FOR LFA1-KUNNR MEMORY ID 001.
SELECT * FROM LFA1 WHERE KUNNR IN S_KUNNR.
MOVE-CORRESPONDING LFA1 TO ITAB..
APPEND ITAB.
ENDSELECT.
CALL FUNCTION '/1BCDWB/SF00000006'
EXPORTING
FORMNAME = 'ZEXM_SMART'
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ITAB = ITAB.
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
plz help me
thanks
sudheerHi,
Try this and reward points by clicking the star on the left of reply,if it helps.
data: form_name type tdsfname value 'ZEXM_SMART'.
data: fm_name type rs38l_fnam.
TABLES: LFA1.
DATA: BEGIN OF ITAB OCCURS 0.
INCLUDE STRUCTURE LFA1.
DATA: END OF ITAB.
SELECT-OPTIONS S_KUNNR FOR LFA1-KUNNR MEMORY ID 001.
SELECT * FROM LFA1 WHERE KUNNR IN S_KUNNR.
MOVE-CORRESPONDING LFA1 TO ITAB..
APPEND ITAB.
ENDSELECT.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = form_name
VARIANT = ' '
DIRECT_CALL = ' '
importing
fm_name = fm_name
exceptions
no_form = 1
no_function_module = 2
others = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
CALL FUNCTION fm_name
TABLES
ITAB = ITAB
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop. -
HT4743 Tv shows purchased wont play through tv, error says cant access iTunes store
Need assistance viewing tv show purchased on ipad, through Apple TV, get error can't access iTunes Store
Hi - I am now having this same exact problem on my Mac laptop. I have many Breaking Bad, etc TV shows that I purchased through itunes & have watched over the years & now all of those, as well as, any new shows I purchase will not play on my laptop. Just same as above person -- a black screen that appears to be playing movie (the timer is actually playing) but no video or sound. Shows / Movies all work fine on my home computer.
On my laptop it keeps saying .. "Not authorized to play .... & then says "Sign into Itunes.. " - but I do sign out & sign back in & still nothing happens. Very annoying and frustrating as I can ususlly figure things out with perserverence and trial & error.
Maybe you are looking for
-
Converting from mm/dd/YYYY to dd/mm/YYYY
Hi Guys, I have column which has a date field in this format "10/4/2007 11:31:09.611000 PM" (MM/DD/YYYY) I want to convert it to simple 'DD/MM/YYYY' Please suggest. -Sandeep
-
AGO function misbehaving, showing PY value same as CY if CY is 0
Hello guys, I have a peculiar problem and I'm not sure whether this could be a bug. Let's say I have the following report Year CY Qty PY Qty 2001 123 176 2002 127 123 2003 0 127 2004 135 135 PY Qties are defined as AGO (CY Qty, Year, 1) For some reas
-
Hi Guys, I went for a trip in the last month where I clicked a lot of pics. I initially transferred them to my windows laptop (JPG). After that, I transferred them to mac and when I view the same files in mac the pictures apear to be in .jpg.xml for
-
After update to yosemite screensaver doesn't find aperture library albums
After I updated to Yosemite the screensaver doesn't seem able to find aperture library albums. When I select an aperture library album (last 3 months) the screensaver is initially able to find this album. After a while and for sure after a restart, i
-
Errors comes when populating bdctable
hi, in bdc programming when i popolating bdctable by using this PERFORM POPULATE_BDCTABLE USING: '1''sapmf02d''0101', ''' rf02d-kunnr ' w_kna1-kunnr, ''' rf02d-d0110 ''x', ''' bdc_okcode ''/00', '1''sapmf02d''0110', '''kna1-land1''w_kna1-name1', '''k