Runtime error ddic_typeleng_inconsistent when i execute st03n?
Hi Experts,
I am getting runtime error DDIC_TYPELENG_INCOINSISTENT when i execute ST03N.
My server ECC6.0 ---Windows---Oracle 11.2.0.3.0
Kernel 7.21, Patch 201
Below i attached screenshot also.
Please Suggest.
Thanks & Regards
Pravin
Hi pravin,
After 720 kernel upgrade you will get this DUMP.
The 7.20 kernel checks complex DDIC structures in more detail than the previous kernels. Short
dumps of the type DDIC_TYPELENG_INCONSISTENT may occur, for example, when calling transaction SM66.
For more detailed information about correcting these inconsistencies, see Note 1610716.
The actions described in this note can be performed anytime, but we recommend to implement it
before the kernel switch.
Similar Messages
-
Runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's
Hello colleagues,
I always get the runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's
For instance, lets take Function Modules:
I tried almost any of them but in particular:
GRPC_API_CONTROL_QUERY Load the list of controls
GRPC_API_ISSUE_QUERY Retrieve issues of the case
GRPC_API_ORGUNIT_QUERY Load list of Organizations
GRPC_API_RMPLAN_QUERY Retrieve remediation plans of case
GRPC_API_RISK_CONTROLS Retrieve the controls of the risk
and etc.
All of them return the runtime error OBJECTS_OBJREF_NOT_ASSIGNED, however I've provided Object ID's in the right format,
The same is for corresponding classes,
Does anyone have such problem before?
Appreciate your responses,
Thank you,
Best Regards,
AntonHi Anton,
We need to pass value for I_SESSION_ID. Because, when i execute FM: GRPC_API_RMPLAN_QUERY by giving correct I_OBJECT_ID as shown below, i'm also getting the same error.
On executing..
Getting following dump.
And attached is the dump analysis .
Thanks
KH -
Runtime error DDIC_TYPELENG_INCONSISTENT
Hi All,
We are got lots of dumps "Runtime error DDIC_TYPELENG_INCONSISTENT" from SAPSYS client 000. could you please help to solve the problem. Already i was checked in the market place but i couldn't find any solution.
Thanks
SharcHi Sharc
Those dumps usually are related with Nametab for data dictionary objects. To fix this you can follow instructions as per SAP note below:
595069 - Recursive check of inconsistent DDIC runtime objects
Then, once identified all involved objects you can fix them via SE11
Best regards -
How to correct Runtime error R6034 when attempting to update iTunes on PC?
How to correct Runtime error R6034 when attempting to update iTunes on PC?
Hey ievafromsa,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
Runtime Error displayed when attempting to access Forums
I've IE 9 installed on a Windows Home Premium box. When I attempt to access the Technet Forums the following is displayed
Server Error in '/Forums' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
I'm running IE 9 on another PC (Windows 7 Pro) and it is able to acess the Technet Forums with no problem (I'm using it to make this entry).
I've compared the settings on both browsers and they are identical. Why does IE on my Home Premium PC misbehave?
Thanks in advance.Hi,
What’s the result of other webpages?
Can you access the thread link successfully?
http://social.technet.microsoft.com/Forums/en-US/0c79aae9-3883-450a-bcd2-ba14ac5c8cd9/runtime-error-displayed-when-attempting-to-access-forums?forum=i
You can test in compatible view for a try first.
http://windows.microsoft.com/en-IN/internet-explorer/use-compatibility-view#ie=ie-9
Alex Zhao
TechNet Community Support -
I am getting runtime error R6034 when trying to open iTunes I have followed all instructions for reinstalling iTunes but it still occurs can any help please?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99537) -
I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start. I verified that I have admin privileges. Can anyone help?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
We have a client application written in Visual Basic 6 that uses the AcroPDF ActiveX DLL to view PDF files in our app. The app works fine the clients secured Windows XP SP 3 PC, and on my Windows Vista Business 32 bit Virtual Machine. However, the application will not launch on the client's highly secured Vista Enterprise 32 bit PC's. The form with the Acrobat Browser control does not even initialize before a "Runtime Error 7: Out of Memory" message is presented. I created a VB 6 test app that has just the form and the Acrobat Browser control on it, and this test application will not initialize either. It gets an "System Error &H80004005 (-2147467259). Unspecified Error" message on attempting to launch. I get the same error message if I attempt to add the Acrobat Browser control to a form in an MS Excel Macro in Excel 2003 on the same PC. Test VB6 applications using the other controls and references in the application launch fine.
The Acrobat installed on these PC's is Acrobat Professional 9.0.0 and/or 9.1.0. In two cases, we have been able to have the application load after uninstalling /reinstalling Acrobat 9.x on the PC, but ONLY for the profile that did the installation. And in one case, after removing that user profile and then logging back on, that user started getting the same errors above.
What policy or registry setting is needed to get this control to initialize on a secured Vista PC for all users?I have done the following on my Vista Business VM and I still have not been able to duplicate the error that I see at the client site.
1. Enabled UAC.
2. Implemented Software Restriction Policies.
3. Set the Default Security Level to Basic User (except for Local Administrators).
4. Lowered the Integrity Level on my AcroTest1.EXE and on my actual executable to "Low".
The sample application and the user application loaded the form and initialized the AcroPDF control when logged in as a normal user account (the account is only a member of the "Users" group on the local Vista PC).
Since this application is an actual Windows application (not an Internet Browser plug in), the default integrity level should be "Medium". -
Portal Runtime Error occurred when trying to create iView using template.
Hi,
When I tried to create an iView by Content Management through "Existing iView Templates", the Portal runtime error occurred.
(However, when I tried to create an iView through "Deployed Portal Archive" or "Web Dynpro Java Application", it was successful)
If you know the same error and the way to solve, please help me.
Best Regards,
Daisuke Ikari
It occurred below system environment.
Version: NetWeaver 7.0 SPstack18
OS: Windows 2003 Server SP2
RDBMS: Oracle 10.2.0.2
And the error log is below.
08:29_26/03/09_0002_6759950
[EXCEPTION]
java.lang.NoSuchMethodError: com.sapportals.portal.pcd.gl.PcdSearchControls.addExplicitAttributeCheck(Lcom/sapportals/portal/pcd/gl/IPcdAttribute;)V
at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.getPCDCatalog(TemplatesCacheSrv.java:184)
at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.refresh(TemplatesCacheSrv.java:589)
at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.getTemplates(TemplatesCacheSrv.java:646)
at com.sapportals.admin.templateselection.panes.InitPane.getCatalogList(InitPane.java:206)
at com.sapportals.admin.templateselection.panes.InitPane.initTemplateList(InitPane.java:122)
at com.sapportals.admin.templateselection.panes.InitPane.processInput(InitPane.java:59)
at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:350)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99)
at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sapportals.appdesigner.appdesignerfw.TabContentComponent.doOnNodeReady(TabContentComponent.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)Thanks for your help. Here is the xml
<PAREVAHRS>
<P_PROJECT_TYPE>Food Equipment</P_PROJECT_TYPE><P_PRJ_CATEGORY>Qualification</P_PRJ_CATEGORY><P_CPM_ID>658</P_CPM_ID><P_FROM_DATE>2007/03/01 00:00:00</P_FROM_DATE><P_TO_DATE>2007/03/31 00:00:00</P_TO_DATE>
<LIST_G_PROGRAM>
<G_PROGRAM>
<PROGRAM_CODE>0180</PROGRAM_CODE>
<PROGRAM_NAME>Food Equipment</PROGRAM_NAME>
<LIST_G_MGR>
<G_MGR>
<PROJ_MGR>Lamoreaux, Mr. David</PROJ_MGR>
<LIST_G_PRJ>
<G_PRJ>
<PROJECT_NUMBER>249400</PROJECT_NUMBER>
<LONG_NAME>KM-60, 100 & 150 BAH, ICE MAKE 249400</LONG_NAME>
<CUSTOMER_NUMBER>22460</CUSTOMER_NUMBER>
<CUSTOMER_NAME>HOSHIZAKI AMERICA, INC.</CUSTOMER_NAME>
<LIST_G_TSKEXP>
<G_TSKEXP>
<TASK_NUMBER>PO01START</TASK_NUMBER>
<EXP_TYPE>100 Labor - Chargeable</EXP_TYPE>
<EXP_DATE/>
<QTY>9.25</QTY>
<REV>0</REV>
</G_TSKEXP>
</LIST_G_TSKEXP>
<PRJREV>0</PRJREV>
<PRJQTY>9.25</PRJQTY>
</G_PRJ>
The PRJREV and PRJQTY is at the same level and they are either zero or non null values.
- Vasu - -
Runtime Error -GETWA_NOT_ASSIGNED when running COI
Hi ALL,
We are getting run time error - GETWA_NOT_ASSIGNED when running COI tasks.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32995).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"GETWA_NOT_ASSIGNED" C
"CL_UC_COI_ACT_PT==============CP" or "CL_UC_COI_ACT_PT==============CM00P"
"REDUCE_GOODWILL_ENTRIES"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "CL_UC_COI_ACT_PT==============CP"
in "REDUCE_GOODWILL_ENTRIES".
The main program was "UCUWB000 ".
The termination occurred in line 722 of the source code of the (Include)
program "CL_UC_COI_ACT_PT==============CM00P"
of the source code of program "CL_UC_COI_ACT_PT==============CM00P" (when
calling the editor 7220).
702 call method do_inv_net_change->create_data_reference
703 exporting
704 i_type = cl_uc_coi_inv_net=>gc_ref_pt_block
705 io_model = do_model
706 importing
707 er_data = lr_t_data.
708 assign lr_t_data->* to <lt_share_block>.
709 call method do_inv_net_change->get_block
710 importing
711 et_pt_shares = <lt_share_block>.
712
713 create data lr_s_data like line of <lt_share_block>.
714 assign lr_s_data->* to <ls_share_block>.
715 * change due to selling invor's transaction
716 read table <lt_share_block> into <ls_share_block> index 1.
717
718 * direct shares prior to divestiture
719 assign component 'R_TH_DSH_OLD'
720 of structure <ls_share_block> to <lr_th_dsh_old>.
721 assign <lr_th_dsh_old>->* to <lt_dsh_old>.
>>>> create data lr_s_data like line of <lt_dsh_old>.
723 assign lr_s_data->* to <ls_dsh_old>.
724 assign component ucf6_cs_coi_fld-pcnt1
725 of structure <ls_dsh_old> to <pcnt1_7a>.
726
727 * change of direct shares in divestiture
Please provide your suggestions.
Edited by: VM2727 on Feb 10, 2012 3:27 AMOr even these ones:
SAP Note 1480856 - C/I: Program termination GETWA_NOT_ASSIGNED
Symptom
When you execute the consolidation of investments, a program termination
occurs (short dump GETWA_NOT_ASSIGNED in the method CREATE_OCI_LIST of the
class CL_UC_COI_ACT).
Note 1467924 - Termination GETWA_NOT_ASSIGNED in CL_UC_COI_ACT_PD
Symptom
When you execute the consolidation of investments, the program termination GETWA_NOT_ASSIGNED occurs in the method CALC_NET_INCOME_MEM of the class CL_UC_COI_ACT_PD. -
Runtime error while trying to execute custom F4 help in OOP ALV grid.
Dear All,
I am trying to add custom search help for one of my column in ALV grid. I'm using OOP ALV, when i click for search help for that column, the system shows runtime error like below.
I am new to OOP concept and tried to follow program BCALV_EDIT_03. But not getting this error occur. Please help me.
With regards.Hi,
In order to be able to provide a search help for a field in an ALV you must do the following things.
1) The field where F4 help need to be attached needs to be made editable.
2) Create an event handler class to handle the ONF4 event. You can refer the following code:
CLASS lcl_alv1_handler DEFINITION.
PUBLIC SECTION.
"Tohandle F4 helps
METHODS handle_f4 FOR EVENT onf4 OF cl_gui_alv_grid
IMPORTING e_fieldname e_fieldvalue es_row_no er_event_data
et_bad_cells e_display.
ENDCLASS.
CLASS lcl_alv1_handler IMPLEMENTATION.
METHOD handle_f4.
CASE e_fieldname.
WHEN 'LIFNR'. "Set F4 for courier vendor
SELECT lifnr name1 FROM lfa1 INTO TABLE lt_lifnr.
IF lt_lifnr IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'LIFNR'
window_title = 'Vendors'
value_org = 'S'
TABLES
value_tab = lt_lifnr
return_tab = lt_return
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc = 0.
READ TABLE gt_final INTO wa_final_t INDEX es_row_no-row_id.
IF sy-subrc = 0.
READ TABLE lt_return INTO wa_return INDEX 1.
IF sy-subrc = 0.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_return-fieldval
IMPORTING
output = lv_lifnr.
wa_final_t-lifnr = lv_lifnr.
MODIFY gt_final FROM wa_final_t INDEX es_row_no-row_id.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDCASE.
CALL METHOD o_alv->refresh_table_display.
ENDMETHOD.
ENDCLASS.
In the above method, GT_FINAL-LIFNR is being overwritten by the LIFNR you had selected from F4 help. So we will call the refresh_table_display after it to see the result in the ALV.
3) After creating the ALV object, add the fields to which the F4 has to be added. For this you
need to declare an internal table based on lvc_t_f4. Use the following code. Here O_ALV is my ALV object.:
CREATE OBJECT o_container
EXPORTING
container_name = 'CUSTCON'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT o_alv
EXPORTING
i_parent = o_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR : gt_f4, wa_f4.
wa_f4-fieldname = 'LIFNR'.
wa_f4-register = 'X'.
wa_f4-getbefore = space.
wa_f4-chngeafter = space.
APPEND wa_f4 TO gt_f4.
Here I am assigning F4 to LIFNR field in the final internal table that is displayed using ALV.
After this register this field for F4.
CALL METHOD o_alv->register_f4_for_fields
EXPORTING
it_f4 = gt_f4.
CREATE OBJECT o_alv_handler.
SET HANDLER : o_alv_handler->handle_f4 FOR o_alv1.
The object o_alv_handler is created based on the event handler class.
I hope that this will solve your issue. Revert if this is solved.
Rgards,
Abijith -
Ppcs5 on win 7 (64bit) runtime error message when starting PPRO
Just installed cs5 on a dell win 7 64bit machine, and when I start ppro cs5 I get an error message that says "Runtime Error!.... this application has requested the Runtime to terminate it in an unusal way...
On a different machine (win 7 (64 bit), I don't get the error message. Anyone else experience this issue and know how to resolve... is it an Adobe problem or a Microsoft problem?Did you got any error while installation ?
Please right click and launch Premiere as an administrator ... -
Runtime Error message when trying to download 7.2
Can somebody please help me?
Whenever I go into iTunes now, it asks me if I would like to download iTunes 7.2. I say yes and this message pops up:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: iTunes
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
Then I hit OK and iTunes closes. This happened also when I tried to download 7.1, and I ended up downloading it from the site myself. I just really want to know what to do, because it has been doing weird things with my library and maybe that has something to do with it.Hello debyani,
I think some error occurred with the downloaded files. You should try to download it again and then try to Install it and before that please go through the link below it may help you.
http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-message-when-trying-to-install-Norton-Internet-Security/td-p/876274. -
I am having major problem. a while ago i downloaded a programm from the internet and there was an error so i uninstalled as i was unable to use it. Since this application, Everytime i log on i get dialogue box opens up Microsoft visual runtime library, Runtime Error R6034. An application has been made an attempt to load the C runtime library incorrectly.please contact the application support team for more info.and every time i tried to open itunes on my desktop i receive this message.So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.
So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.
Could you walk us through what happened when you tried to do the download, please? -
Hello SD members,
I have an issue in which while executing VL02N and trying to delete the outbound delivery getting runtime error "dynpro_msg_in_help" in production system.
Kindly suggest how to solve this...
Regards
VenkatHi Venkata Pradeep,
Can you please proivde more details about an error to understand the issue.
Regards,
Pravin
Maybe you are looking for
-
I Downloaded an app that keeps all address' in one place. I went to add my iCloud email and when asked for my password, nothing I tried worked. It is obviously not the same password that I use to login to my Apple or iTunes account. How do I find out
-
Automatically creation of storage location for material, in MF60
Hi all, my collegue of PP module uses MF60 transaction. When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001. In MM i have activate the automatic
-
Why does a 4x6 photo try to print in 81/2 x 11?
HP Deskjet F4580 (wireless) Windows 7 64-bit upgraded from HP Photosmart Essentials 3.5? to HP Photo Creations When I tried to print a 4"x6" photo, it looked like HP Photo Creations was trying to print on an 81/2" x 11" sheet of paper. I tried it
-
Can I use an iMac as a thunderbolt storage and screen for the Mac Pro?
I'm looking to buy the new Mac Pro, I already know I can use my existing iMac through thunderbolt as a screen, but will it work as a storage/HDD too?
-
dear gurus, can any body explain the transfer of requirements from salesorder to production..ie integration of sd and pp. in sales orders what are all the pp parameters ? -guna