Runtime error during COPA-Ext

Hi Guys
I am new to SAP BW.
I am trying to schedule an initial load but I end up getting the following error message.
This is an extract from the dump.
call function 'RSAN_LOGSYS_DETERMINE'
        destination g_dest
        exporting
          i_client = l_s_desdisp-rfcclient
        importing
          e_logsys = l_rfclogsys.
      if l_rfclogsys <> p_logsys.
        message x000.
      endif.
    endif.
the p_logsys has my correct system name, but l_rfclogsys has some other name.
The Data flow shows a smooth data flow from the dATA source to my infocube and all transfer/update rules are active. The source system is connected succfully to the bw system. (I replicated succfully).
The strange thing is when I perform a delta upload on older packages, there is no dump!!
Can some one please help!!!!!! Points assured
Thanks and Regards
Sameer

Hi,
where do you get this error? I believe in your source system. If yes, I think you have some records posted in your COPA-tables that correspond to a logical system that doesn't exist anymore. Did you rename the logical system? Did you copy your system from another system?
regards
Siggi

Similar Messages

  • Runtime error during full installation

    hi
    do any one know where SAPLE30B comes....
    i got a runtime error during full installation...
    it gives a error like : the error has occured because the table was not filled through user input on the selection screen of program SAPLE30D"
    i dont know where it went wrong
    i wil be greatful if u help me to solve it...
    Rdgs
    Chatriyan
    Edited by: Chatriyan india on Aug 1, 2008 7:46 AM

    Hi,
    this sounds as some field values were not transported to the internal tables. Which transaction do you use? In case you are trying to use dark installation routines, make sure all needed fields are filled (check within the dump). If this all does not help - open a customer message - a dump will always be inspected by SAP Support.
    KR
    Uwe

  • Runtime Error during Phase Start Data Selection

    Hello Forums,
    We are using TDMS (2006_1_700) to extract a year's worth data from one client into a new client on the same ERP EhP4 system.
    All the systems - central, sender and receiver are at the same DMIS levels(SP16) and all necessary notes have been applied.
    During the Step 'Start Data Selection' of the Data Transfer Phase, we see around 60 of the ~12000 sub tasks abort with the below error:
    Batch job for access plan calculation in sender system ended with errors
    Message no. DMC_UTIL_MSG021
    Diagnosis
    The access plan calculation was executed as a background job in the sender system. In this background job, an error occurred.
    Procedure
    Check if a short dump occurred in the sender system while the access plan was calculated. If existing, this short dump contains further information about the cause of the problem.
    A frequent error is that selection criteria for data reduction (for example selection groups) are wrongly defined which causes the database access that consideres these selection criteria to fail.
    The corresponding dump in the Sender system is as below:
    Runtime Errors         SAPSQL_WHERE_PARENTHESES
    Exception              CX_SY_DYNAMIC_OSQL_SYNTAX
    Error analysis                                                                                |
    |    An exception occurred that is explained in detail below.                                      |
    |    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not                |
    |     caught in                                                                                |
    |    procedure "/1CADMC/DMCACS00P000000001" "(FUNCTION)", nor was it propagated by a               |
    |     RAISING clause.                                                                              |
    |    Since the caller of the procedure could not have anticipated that the                         |
    |    exception would occur, the current program is terminated.                                     |
    |    The reason for the exception is:                                                              |
    |    The current ABAP program has tried to execute an Open SQL statement                           |
    |    which contains a dynamic condition. The part of the condition specified                       |
    |    at runtime is incorrectly parenthesized.   
    Please suggest in case any of you have encountered similar error and possible resolution.
    Thanks in advance,
    Srikishan

    Hi Suman,
    Thanks a ton. I somehow missed this when searching on the SMP.
    I will implement the steps and post it back by tomorrow.
    Regards,
    Srikishan

  • Portal Runtime error during 1, 2, 3 Drag & Relate?

    Hi,
    I have successfully install SR1 version of the EP6.  I am attempting to complete the "1, 2, 3 Drag&Relate" weblog.  During one of the steps you have to go to User Administration > User Mapping to set the Everyone group user mapping.
    I am using sa id and the password I set during my SQL installation.
    As I click save button after entering the input I get this error:
    Portal Runtime Error
    An exception occurred while processing a request for:
    iView:
    pcd:portal_content/administratrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
    Component Name: com.sap.portal.usermanagement.admin.UserMappingAdmin
    User Mapping not fully available..
    Exception id: 2:07_11/01/2005_0001_4582650
    See the details for the exception ID in the log file.
    Any ideas why this error is occuring?
    Thanks,
    Jin Bae

    Hi Jin,
    I think SAP note number 796540 will be helpfull to you.
    It was known User Management issue which is not connected to any Unification feature.
    Personal advice: try to restart Portal server.
    Regards,
    Julia

  • Getting runtime error during billing vf01

    Hello,i was doing billing vf01 getting runtime error after saving. what shud i do.The error says "SAPSQL_INVALID_FIEDNAME"CX_SY_DYNAMIC_OSQL_SEMANTIC SC"SAPLV61Z" or "LV61ZUQ1""SEL_KONDTAB".
    This is what i got in the error, in "what shud be done" title of the error.kindly suggest to clear out this problem.

    Hi Ramya,
    I am assuming you hv implemented your own function module in INCLUDE LV61ZUQ1. During VF01, SAP has detected at least 1 fieldname which does not exist in your ABAP codes/Select statement. This could happen, if for example a new field  has been implemented in a structure/trans. table or new fields added to field catalogs, but has not been successfuly generated/SAP stored the info structure incorrectly.
    If that's the case, the best way is to delete the field and re-generate, or if you added a field to field catalog, delete field in catalog then add, re-generate.
    Cheers,
    Benny Andre

  • Runtime error during opening a process chain in rspcm

    Hello,
    i created a process chain just a simple one which loads Data from the DataSource into a DSO and then into a InfoCube.
    I executed this processchain without activiating my Initial-Request in the DSO.
    So i got a hanging Request there, i deleted all Requests from all objects in this processchain. Still had this hanging Request, so i deleted this one Request from the RSEQDONE. Now my processchain is working, but it takes very long to open it when i am in the RSPCM or i even get a runtime error.
    Any suggestions?

    Regarding RSPCM you better to check the oss notes which are shared by Michael devine.
    Coming to your issue, if you have loading huge data then better to increase your wait time of your info pack load.
    go to your info pack --> menu scheduler-->Time out time, increase as you need.
    if your doing full loads, please use proper selections and split your load as small chunks.
    increase packet sizes and parallel settings to speed up your load.

  • Runtime error in COPA

    Hi
    I'm getting a runtime error message saying "The Dictionary structure or table "*T2580" is either not active or doe"
    s not exist.' when i go to create the characteristic values
    Pls let me know how to resolve it
    Thanks

    Hi
    1. Run report RKEAGENF for banking template operating concern E_B1.
    The selection fill up as follows:
    Operating concern: "E_B1"
    Structure: leave blank
    Type of CO-PA: "1" (Depending on Costing or account based)
    Refill? : "X".
    2. Then run RKEAGENV
    Regards
    Ajay M

  • ABAP runtime errors during customer extension to other company code

    Hi,
    I have created one customer in company code 1111 with tcode XD01.
    When i am trying to create the same customer in the other company codes 2222,3333, and 4444, with tcode FD15, system is giving runtime errors like below.
    The following syntax error occurred in the program RFBIDE20             
    "Field "BSZA1_D0100-MOB_NUMBER" is unknown. It is neither in one of the"
    Error in ABAP application program.                                                                               
    The current ABAP program "RFBIDE10" had to be terminated because one of the
    statements could not be executed
    *This is probably due to an error in the ABAP program *
    Could anyone help me out in this regard.
    Thanks,
    Srinu.

    Hi
    Check SAP Note - 757821
    Thank You,

  • Runtime error during video calls - "pure virtual f...

    When I video call someone, about 10-30 seconds into the call my video freezes and subsequently vanishes on the other end of the call, and I get a popup error titled "Microsoft Visual C++ Runtime Library" with the body:
    "Runtime Error!
    Program: C:\Program Files (x86)\Skype\Phone\Skype.exe
    R6025
    - pure virtual function call"
    On my end of the call, I can still see my own video and the other person's video. If I click OK or X on the error message, Skype crashes.
    If I call someone without video, Skype does not crash. If I later add video, Skype crashes similarly. If the other person has video and I don't, Skype does not crash; if I have video and they don't, Skype does crash. Skype does not crash while previewing my video in the video options.
    I'm running Windows 7 Home Premium SP1. I've updated Skype a few times since this started happening, and it only started happening when I was forced to update by being signed out. It does not happen on my other computer.
    Any help would be appreciated.
    Attachments:
    runtime error.png ‏36 KB

    Please,  run the DirectX diagnostics tool (32-bit version).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Runtime error during automatic purchase order

    Dear Experts,
    While i am trying to post automatic purchase order through tcode MB01..system is showing an run time error.
    Runtime error RAISE_EXCEPTION
    Date and Time 06/09/2009 14:26:03
    hort dump has not been completely stored (too big)
    Short text
    Exception condition "WRONG_PARAMETERS" raised.
    What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
    Error analysis
    A RAISE statement in the program "SAPLGLT2" raised the exception
    condition "WRONG_PARAMETERS".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
    Program SAPLGLT2
    Include LGLT2F07
    Row 19
    Module type (FUNCTION)
    Module Name G_BEB_MOVE_ACCIT_TO_STRING
    rce Code Extract
    e SourceCde
    *1 ----*
    *2 * Created by : SAP* **
    *3 * Date : 25.02.2007 **
    *4 * Time : 10:01.44 **
    *5 ----*
    *6 * This Report is generated by Report RGUGGLT0 **
    *7 ----*
    8
    9 IF I_LEDGER = SPACE.
    10 RAISE WRONG_PARAMETERS.
    11 ELSEIF SY-MANDT = '800' AND I_LEDGER = 'SP'.
    12 IF NOT i_accit-GSBER IS INITIAL.
    13 E_SPLIT+000000(000004) = I_ACCIT-GSBER .
    14 ENDIF.
    15 E_PARTNER+000000(000004) = I_ACCIT-PARGB .
    16 E_BALANCE+000000(000004) = I_ACCIT-GSBER .
    17 E_SPL_PAR+000000(000004) = I_ACCIT-GSBER .
    18 ELSE.
    >> RAISE WRONG_PARAMETERS.
    20 ENDIF.
    Kindly help me please. Because of this, i cant able to post.
    Regards,
    Prasath

    Hi,
    go to transaction snote in your system and press ctrl + F8 to download the sapnote 985672.
    then go through the instructions in the note and implement it in the system.
    As per the note corrections you need to do below depicted changes in the function module.
    $$----
    $$
    $ Correction Inst.         0120031469 0000514577                     $
    $ Req. Corr. Instructions  0120031469 0000486230 Note 0000942542     $
    $----$
    $ Valid for       :                                                  $
    $ Software Component   SAP_APPL   R/3 Standard                       $
    $  Release 500          To SAPKH50014                                $
    $$----
    $$
    *& Object          FUNC G_BEB_BALANCE_DOC
    *& Object Header   FUGR GLT0
    *& FUNCTION G_BEB_BALANCE_DOC
          IF ld_baldoc_part <> xon.
         find items with partner assignment is set.
            CALL FUNCTION 'G_BEB_MOVE_ACCIT_TO_STRING'
              EXPORTING
    *>>>> START OF DELETION <<<<<
                i_ledger  = id_ledger
    *>>>> END OF DELETION <<<<<<<
    *>>>> START OF INSERTION <<<<
                i_ledger  = ld_ledger
    *>>>> END OF INSERTION <<<<<<
    Don't do it manually when you will implement the note it will take care of corrections by itself.
    KR Jaideep,

  • Runtime Error during FileUpload to KM through webdynpro java

    Hi All,
    When i try to upload a file using webdynpro java. I was using referring this blog.
    /people/rohit.radhakrishnan/blog/2005/05/27/uploading-files-to-km-repository-using-webdynpro-apis
    But when i deploy my application, it throws me a runtime error
    " java.lang.NoClassDefFoundError: com/sapportals/wcm/repository/IResourceContext".
    I have given the sharing reference as "Portal:sap.com/com.sap.km.aaplication". in webdynpro reference.  and have added all the required jar files. What else needs to be done for this. Can anyone please help me out in this issue?
    Regards,
    Divya

    Please notice that this is case sensative-
    "PORTAL:sap.com/com.sap.km.application"
    Edit - I also see that you have two a instead of two p - please check for spelling errors
    Edited by: Aviad Levy on Feb 4, 2008 9:16 AM

  • Runtime Error during export ALV Grid to Local File and Print Priview

    Hi all,
             While Exporting ALV grid to local file using menu List->export->local file , I m getting following runtime error,
             Field Symbol has not yet been assigned.
    Details of Errors:
    Program : SAPLKKBL
    Include :   LKKBLF99
    Module Type : (FORM)
    module name : GEN_FIELD_OUT2
    So. pls Suggest any good solution.
    Thanks & Regards,
    Sandip Sonar.

    hi
    this is happening just because you might have declared that your ALV list should have a checkbox, but defined no field as "checkbox" into your internal table.
    and one more thing to check up is that before you call the REUSE_ALV_GRID_DISPLAY, you need to fill a few parameters for instance is_layout. This one has a field box_fieldname, in which you have to enter the name of the field of the internal table that will store the 'X' as and when the checkbox is checked.
    hope this helps
    regards
    Aakash Banga

  • Runtime Error during Creation of Asset (AS01)

    Hello Everyone !
    I have been trying to CREATE ASSET for a long time but  unfortunatly land up on ..... RUNTIME ERROR. I used all the possible ways to get it solved but i am stuck. Error analysis says The ASSERT Condition was violated.
    Hope you guys would help me out and push my knowledge further. Answers would be highly appreciated.
    Srinivas.

    Hi Srinivas,
    I found more information about your issue. These are notes that have been given by SAP in regards to the "ASSERTION_FAILED" runtime error in AS01 or also AS91.
    931764    Runtime error ASSERTION_FAILED
    989402    Expand/Collapse All events in planning hang t
    951191    AA 908, AA 698, AA 475, incorrect ANLC values
    932560    ITAB_DUPLICATE_KEY runtime error
    971300    AA610 for fixed asset creation, change or recalculation
    988238 FAQ New depreciation calculation
    949802 AS91: Dump ASSERTION_FAILED in CF_FAA_CFG_TRANSACTION
    Please be aware of note 988238 which is a composite note with many erros in FI-AA when in ECC 6.0  It advices to:
    "Implement the following notes or import at least Support Package 6 for the components EA-APPL and SAP_APPL (available as of October 2006)."
    Check also note  949802.
    I hope this helps.
    Best Regards,
    Vanessa.

  • Runtime errors during RFQ creation

    Hello experts,
    I am trying to create a RFQ for my client. I have provided all necessary information needs to create a RFQ but when I try to execute, I get Runtime error "DYNPRO_NOT_FOUND"
    Can anyone tell me how can I solve this problem. I belive this error related to ABAP program.
    Regards,
    Atul Kumbhani

    Raf,
    Termination occurred in the ABAP program "SAPLXM06" - in "EXIT_SAPLEINM_013".                                   
    The main program was "SAPMM06E ".                                   
    In the source code you have the termination point in line 10                                   
    of the (Include) program "MM06EO0C_CUSTSCR1_HEAD_SET_DAT".                                   
    Regards,
    Atul Kumbhani

  • Runtime error during createStatement() trying to connect to MySQL database

    I am trying to make a script to access a MySQL database over the internet. I can get this to work on my home server using PHP, but I can't figure out why my code below is not working. I get a runtime error in the conn.createStatement() line but I can't figure out what the problem is... Any help is appreciated...
    import java.sql.Connection; import java.sql.DriverManager; import java.sql.ResultSet; import java.sql.SQLException; import java.sql.Statement; public class sqltest extends Activity {                 Connection conn=null; try { // from http://help.godaddy.com/topic/319/article/262 conn = DriverManager.getConnection( "jdbc:mysql://profiles.db.1111111.hostedresource.com:3306/dbname", "dbname", "password"); } catch (SQLException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } try { // Create a result set containing all data from mysql_all_table Statement stmt = conn.createStatement(); ResultSet rs = stmt.executeQuery("SELECT * FROM *");                 } }
    PS: I am developing this code for android using Eclipse, but I think the issue is a pure java code related...

    You catch the conection exception and keep on going. So 'conn' is null. That produces a null pointer exception at the createStatement() line. Which I am guessing the IDE tells you exactly that.

Maybe you are looking for