Runtime Error during Creation of Asset (AS01)

Hello Everyone !
I have been trying to CREATE ASSET for a long time but unfortunatly land up on ..... RUNTIME ERROR. I used all the possible ways to get it solved but i am stuck. Error analysis says The ASSERT Condition was violated.
Hope you guys would help me out and push my knowledge further. Answers would be highly appreciated.
Srinivas.

Hi Srinivas,
I found more information about your issue. These are notes that have been given by SAP in regards to the "ASSERTION_FAILED" runtime error in AS01 or also AS91.
931764    Runtime error ASSERTION_FAILED
989402    Expand/Collapse All events in planning hang t
951191    AA 908, AA 698, AA 475, incorrect ANLC values
932560    ITAB_DUPLICATE_KEY runtime error
971300    AA610 for fixed asset creation, change or recalculation
988238 FAQ New depreciation calculation
949802 AS91: Dump ASSERTION_FAILED in CF_FAA_CFG_TRANSACTION
Please be aware of note 988238 which is a composite note with many erros in FI-AA when in ECC 6.0 It advices to:
"Implement the following notes or import at least Support Package 6 for the components EA-APPL and SAP_APPL (available as of October 2006)."
Check also note 949802.
I hope this helps.
Best Regards,
Vanessa.

Similar Messages

Date error during creation of asset master using bapi

Hi All,
Am creating asset master using BAPI_FIXEDASSET_OVRTAKE_CREATE ,,
but am getting date problem while passing value '21022005' ( or any date ) in the format 'ddmmyyyy'
the error says 'the capitalization date is invalid' ....
the capitalization date is under the structure BAPI1022_FEGLG002 of the above mentioned bapi....
even i have tried using '21.02.2005' its still not working as the capitalization date is 8 char...
kindly help me out with the possibilities
thanks
john

Hi John,
Some of the structures you have to fill for the IDOC belongs to a referencing ...X structure. For example structure BAPI1022_FEGLG002 and BAPI1022_FEGLG002X.
When you fill the capitalization dat (BAPI1022_FEGLG002-CAP_DATE = '19981231') it's necessary to fill the corresponding field (BAPI1022_FEGLG002X-CAP_DATE = 'X') to specify that the content of the field should be transferred to the fixed asset. Otherwise it'll be not transferred and you'll get an error message instead.
Regards Bernhard

Error during creation of asset.

Hello, when i am creating an asset for a certain asset class, i am getting an error popup which reads 'Customizing inconsistency - missing/incorrect entry in table T093B'.The depreciation area associated with the asset class has been created by copy in my opinion. Anyone encountered a similar message.
thx in advance.

Hi,
The error is more generic in nature, nornmally you need to check the customizing settings there is an expert area where you can peform the checking,goto asset accounting --> overview for experts .
Perform the step by step checking then you will be able to identify out the error. but if there is any specific message then let us know
regards,
Bharathi

Installation error during creation of user SAPJSF

Hello,
i'm performing SOLMAN installation and the installation stops in "Import Abap" step with problem creating the SAPJSF user. Several posts regarding the same error did not helped. When the sapinst is trying to create the SAPJSF user, i notice that the DB2 service in Windows services changes from "started" to "stopped"
OS:windows 2003 enterprise 64bit
DB:db2 udb
SOlman: 7.0 including EHP1
The error from "sapinst.log":
WARNING 2010-09-17 10:32:40.906
Execution of the command "I:\usr\sap\SOF\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install" -c sysnr=00 -c ashost=fmgrsolman -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -user_type system -message_file UserCheck.message" finished with return code 4. Output:
Sep 17, 2010 10:30:29... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Sep 17, 2010 10:30:30... Info: Connected to backend system SOF client 001 as user DDIC
Sep 17, 2010 10:30:30... Info: Called for user SAPJSF
Sep 17, 2010 10:30:30... Info: Formal password check successful
Sep 17, 2010 10:30:30... Info: Will create user SAPJSF
Sep 17, 2010 10:31:38... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Sep 17, 2010 10:32:40... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
     at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
     at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Sep 17, 2010 10:32:40... Info: Leaving with return code 4
The error from "UserCheck.log":
Sep 17, 2010 10:36:58... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Sep 17, 2010 10:36:59... Info: Connected to backend system SOF client 001 as user DDIC
Sep 17, 2010 10:36:59... Info: Called for user SAPJSF
Sep 17, 2010 10:36:59... Info: Formal password check successful
Sep 17, 2010 10:36:59... Info: Will create user SAPJSF
Sep 17, 2010 10:37:59... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Sep 17, 2010 10:38:56... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
     at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
     at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Sep 17, 2010 10:38:56... Info: Leaving with return code 4
Edited by: DimitrisDimas on Sep 20, 2010 5:38 PM

hi
wat s ur JDK version??
please refer this,
[SAPJSF - no password for user - ECC6 - IDES|SAPJSF - no password for user - ECC6 - IDES]
jansi

Travel Expense - Posting run error - Error during creation of posting run

Hi Guru's,
Look forward for your insights. Here you go with my question.
We are implementing Expense Mgt with Portal with out scope for payroll in SAP. I have set up Expense type, WT, Symbolic A/c to G/L Accounts. Im performing Unit testing currently.
Created Expense trip in ESS, from R/3 tcode PRAP, have approved trip, and settled through Tcode - PREC.
When I try to create posting run under transfer to accounting, I get following error
Error during creation of posting run number (->PR1
Message no. 56840
I'm not sure why this error was popping up. Appreciate your suggestion.
Regards
Praveen.N

Hi,
Since you are trying to make payment through FI, you need to maintain ur employee as Vendor. You can do it through PRAA.
So while creating posting run for this trip, it checks if the respective Vendor for this employee is maintained or not.
Pls maintain it as vendor and see if the errors are still coming.
Rakesh

Error during creation of transfer orders for material

Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzo

your picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

Error during Creation of Product Group

Hi experts
I am getting below error during creation of Product Group MC84,
how to solve this
The field is defined as a required field; it does not contain an entry
Message no. MG144
Procedure
Transfer a suitable value.
If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
Note
For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) ->Locking Material Master Records.

Hi,
Please refer the below thread,
PRODUCT GROUP
Regards,
Senthilkumar

Standalone Scenario - Error during Creation of Local Purchase Order

Hi All,
I am trying to setup Standalone Scenario, i have created all the master data locally, i am able to Order SC, but after workflow approval SC goes into error 'Error during creation of local purchase order from shopping cart XXXXXXXXX'
I have created following configuration setting for local PO number
1) In SPRO -> Cross-Application Basic Settings -> Number Ranges -> Define Number rang. for Schopping Carts and Follow-on Doc. --- i have number ranges for PO follow-on doc. i.e.
inrerval No = PO, from number = 0004000000, to number = 0004999999, ext. = unchecked
2) In SPRO -> Cross-Application Basic Settings -> Number Ranges -> Define Ranges per backend system for follow-on documents PO, PR etc
3) In sourcing (SPRO -> Cross-Application Basic Settings -> Sourcing -> Define Interactive Sourcing for product categories) --- sourcing is never carried out.
Can anybody help?
Regards,
SAP Guy.
Edited by: SAP Guy on Apr 23, 2008 2:32 AM

Hi SAP Guy,
Following steps are must for Local number range
1) Create number range for local PO
2) Maintain your logical system in 'Define number range per backend system for follow on document'
3) Define Transaction Type for BUS2201, define document type (e.g. EC1)
4) Assign Document type (EC1) in Org attribute BSA.
Hope this helps.
Regards,
Manish.

Error during creation of transfer orders for mateRIA

hi gurus,
I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
"Error during creation of transfer orders for mateRIAL.how to correct the error.
regards
murugan

Hi,
The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
Regards,
raghu

Error during creation of user

Hi!
I am using USERS_GEN to generate a user in organizational structure from an existing SU01 user. When I first did this it worked fine. After that we removed the user from the org.structure. Now when we try to generate it again from USERS_GEN we get the message "Error during creation of user....central person already exists".
When I look at that CP I see that is already exists. I need to create a position under an org. unit and I need the already created CP to be allocated to that position.
How do I do that?
Sincerely
Anders Öhrling

Hi
Which SRM version are you in ?
However you can delete the CP via Function module HR_CENTRALPERSON_DELETE but this central persons are stored in HRP1001 table .
regards
Muthu
Edited by: Muthuraman Govindasamy on Sep 9, 2008 12:56 PM

Error during creation of info record for pipline material.(Urgent)

Hi All,
We are getting the following error during creation of Info record for pipeline material
" Material XXXXX is not a pipline material"
we have checked the material master and found it is a pipeline material.
Kindly advice on the same.
Help in any form will be rewarded.
Best Regards
Arihanth

Hi Arahanth,
The steps u need to check are;
1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
2) when u create the info record (ME11) ensure the info category is selected as pipeline.
Hope its clear to u
if solved do reward me points
Regards
Anil Thai

Runtime error during full installation

hi
do any one know where SAPLE30B comes....
i got a runtime error during full installation...
it gives a error like : the error has occured because the table was not filled through user input on the selection screen of program SAPLE30D"
i dont know where it went wrong
i wil be greatful if u help me to solve it...
Rdgs
Chatriyan
Edited by: Chatriyan india on Aug 1, 2008 7:46 AM

Hi,
this sounds as some field values were not transported to the internal tables. Which transaction do you use? In case you are trying to use dark installation routines, make sure all needed fields are filled (check within the dump). If this all does not help - open a customer message - a dump will always be inspected by SAP Support.
KR
Uwe

Error during creation of posting runnumber

Hello there,
I am trying to post a trip using transaction PRFI after the trip has been approved and settled and experiencing the error bellow. Two days ago, I was able to perform this transation PRFI and PRRW succesfully. Please advise.
Leon
*Error during creation of posting run number (->PR1*
*Message no. 56840*

Hi Saathi,
If you need to post the document to AP, all the employees have to be converted as Vendors using T code PRAA. But this wont be required when you run through payroll. I hope the error occured due to not converting the employee as vendor. Pl check & revert.
Thanks,
Nandagopal C

Runtime Error during Asset Creation (AS01)

Hello Everyone !
I have been trying to CREATE ASSET for a long time but unfortunatly land up on ..... RUNTIME ERROR. I used all the possible ways to get it solved but i am stuck. Error analysis says The ASSERT Condition was violated.
Hope you guys would help me out and push my knowledge further. Answers would be highly appreciated.
Srinivas

Hi Srinivas
Please go through T-cd:ST22 and check the dump content first, especially, u2018Error analysisu2019, u2018How to correct the erroru2019 of the runtime error long text may give you some hints to solve the problem.
Regards
George

Runtime errors during RFQ creation

Hello experts,
I am trying to create a RFQ for my client. I have provided all necessary information needs to create a RFQ but when I try to execute, I get Runtime error "DYNPRO_NOT_FOUND"
Can anyone tell me how can I solve this problem. I belive this error related to ABAP program.
Regards,
Atul Kumbhani

Raf,
Termination occurred in the ABAP program "SAPLXM06" - in "EXIT_SAPLEINM_013".
The main program was "SAPMM06E ".
In the source code you have the termination point in line 10
of the (Include) program "MM06EO0C_CUSTSCR1_HEAD_SET_DAT".
Regards,
Atul Kumbhani

Runtime Error during Creation of Asset (AS01)

Similar Messages

Maybe you are looking for