Runtime Error "DYNPRO_MSG_IN" and "MESSAGE_TYPE_X"

Hi Gurus,
I getting the following Runtime Error
"DYNPRO_MSG_IN" and "MESSAGE_TYPE_X"
can anybody help me..
Thanks & Regards
Manna Das

upgrade your patch levels this would solve ur problem

Similar Messages

  • Photoshop Elements 10 will not open.  I get Error message that says "Runtime Error!" and closes.  What do I do?

    Help.  Photoshop Elements 10 will not open.  I get Error message that says "Runtime Error!" and closes. What do I do?  What does it mean?  I bought Elements 10 at a retail store.  It did work for a while.

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
    2.  The full version of the operating system you are using ( ie Windows 7 32bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pls help me get itunes back on my computer.  runtime error R6034 and error 7 windows error 1114

    when i updated my itunes i got an error that it couldnt install it and to do it manually which didnt work either so i tried the uninstall and reinstall but i keep getting a runtime error R6034 and error 7 windows error 1114 and it wasnt installed correctly.  pls help so i can get itunes back on my computer.  i use windows vista. thanks so much in advance.

    Hi shannonvc,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • HT1923 I downloaded Itunes and keep getting a runtime error R6034 and was told to contact Itunes about problem/

    I downloaded Itunes and keep getting a runtime error R6034 and was told to contact Itunes about problem/

    First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    If you still get the errors after that, try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • TS2570 startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

    startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

    ChrisJ4203 wrote:
    Use this support document to remove iTunes and reinstall it on the computer. Follow the directions exactly. http://support.apple.com/kb/HT1923
    Chris,
    This absolutely solved the problem !!!!!!!!!!!!!!!!!!!!!   I was having the exact same error messages as Mike.
    Thank You for the great fix and I did not lose one song file!!!!!!!!!!!!
    G

  • Whilst updating itunes software to latest version I get runtime error R6034 and cannot get into itunes. Is there a fix for this problem?

    Whilst updating itunes software to latest version I get runtime error R6034 and cannot get into itunes. Is there a fix for this problem?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99376)

  • Regarding runtime error DBIF_RSQL_SQL_ERROR and exception CX_SY_OPEN_SQL_DB

    Hi All,
    I am loading a COPA cube from a DSO.
    There are about 15million records to be loaded. every time i try loading the data, 1 or 2 Data packages gets stuck and finally it leads to a runtime error DBIF_RSQL_SQL_ERROR with exception CX_SY_OPEN_SQL_DB.
    When i checked in SM21 transaction code, i got the following message
    10:41:52 BTC  018 500 AMRUKV                     BY  O Deadlock occurred
    10:41:53 BTC  018 500 AMRUKV                     BY  4 Database error 60 at INS access to table /BIC/FCSDV
    10:41:53 BTC  018 500 AMRUKV                     BY  0 > ORA-00060: deadlock detected while waiting for resource
    10:41:54 BTC  018 500 AMRUKV                     AB  0 Run-time error "DBIF_RSQL_SQL_ERROR" occurred
    10:41:58 BTC  018 500 AMRUKV                     AB  1 > Short dump "080818 104154 s0173bel PB100 " generated
    10:41:58 BTC  018 500 AMRUKV                     D0  1 Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20080818104154s0173bel_PB1_00 AMRUKV 500 )
    In transaction code ST22 i got the following message:
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          18.08.2008 10:41:54
    Short text
         SQL error in the database when accessing a table.
    What happened?
         The database system detected a deadlock and avoided it by rolling back
         your transaction.
    What can you do?
         If possible (and necessary), repeat the last database transaction in the
          hope that locking the object will not result in another deadlock.
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
          in  procedure "WRITE_ICFACT" "(FORM)", nor was it propagated by a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         The database system recognized that your last operation on the database
         would have led to a deadlock.
         Therefore, your transaction was rolled back
         to avoid this.
         ORACLE always terminates any transaction that would result in deadlock.
         The other transactions involved in this potential deadlock
         are not affected by the termination.
    How to correct the error
        Database error text........: "ORA-00060: deadlock detected while waiting for
         resource"
        Internal call code.........: "[RSQL/INSR//BIC/FCSDVD_C02 ]"
        Please check the entries in the system log (Transaction SM21).
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
        "GPD3UMZD6V4YAKZAIWAOCYLV07Y" or "GPD3UMZD6V4YAKZAIWAOCYLV07Y"
        "WRITE_ICFACT"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
        program: The source code of the program
           In the editor, choose "Utilities->More
        Utilities->Upload/Download->Download".
        4. Details about the conditions under which the error occurred or which
        actions and input led to the error.
        The exception must either be prevented, caught within proedure
        "WRITE_ICFACT" "(FORM)", or its possible occurrence must be declared in the
        RAISING clause of the procedure.
        To prevent the exception, note the following:
    Can anybody suggest on what can be done?
    Thanks in Advance,
    Regards
    A.T

    Hi ,
    This is a table space issue....
    u will be getting a Dump...as DBIF_RSQL_SQL_ERROR check in ST22. in this DUMP if u scroll down u will find the table for which this is failing. Actually this is like some of the table related to the DSO is not having sufficient space to cary out the transaction. hence it is failing.
    U can also see in DB02--> Deadlock....u will see that there is a deadlock for this table. So find the table from ST22 and ask ur basis team to increase the space for this table....
    This can be solved only by increasing the space of the table...no other solution....ask help from ur basis team.
    Thanks
    Sandeep

  • Runtime Errors UNCAUGHT_EXCEPTION and Exception CX_RSR_COB_PRO_NOT_FOUND

    Hi ,
    When i tried to load data into my standard cube the following short dump error occure.
    The data was updated to PSA but while updating to further data target (my standard cube) the following error occured:
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_RSR_COB_PRO_NOT_FOUND
    Date and Time          2010.12.13 10:20:48
    Short text
         An exception occurred that was not caught.
    What happened?
         The exception 'CX_RSR_COB_PRO_NOT_FOUND' was raised, but it was not caught
          anywhere along
         the call hierarchy.
         Since exceptions represent error situations and this error was not
         adequately responded to, the running ABAP program
          'CL_RSR========================CP' has to be
         terminated.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
        An exception occurred which is explained in detail below.
        The exception, which is assigned to class 'CX_RSR_COB_PRO_NOT_FOUND', was not
         caught and
        therefore caused a runtime error.
        The reason for the exception is:
        0REQUEST is not a valid characteristic for InfoProvider

    Please check the infoobject 0REQUEST, whether it is in active state, if not acivate it.
    Check for 0REQUEST Object in Infocube level at characteristics tab, if it is not available try to add this characteristic to cube.
    if 0REQUEST is not available, install it from the content and include it in the cube.
    rgds, Ghuru

  • The latest update has resulted in a runtime error (R6034) and I keep being told Microsoft Visual C   Runtime Library is being accessed incorrectly.  Anyone know how to overcome the problem?  I am using a Dell Inspiron  9400 running Vista.

    The latest update to itunes has resulted in a whole series of runtime errors (R6034).  Microsoft Visual C++ Runtime Library states it is being accessed incorrectly.  I am also told that Apple Mobile Device Failed to Start.  Additional messages suggest the error is in itunes.exe and ituneshelper.exe.  I also get Error 7 (Windows error 1114).  Anyone got any ideas how to overcome this (these) problems?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99527)

  • Runtime Error R6025 and DAQ-Driver

    Operating System Windows2000
    Teststand  Version 3.0
    DAQ-Driver  6.9.3f5
    Serial Driver  1.7
    LabvIEW RTE build with LabVIEW 6.1
    hello,
    we have build a testsytem based on LabVIEW and Teststand.
    We use the NI-PCI boards 6713, RS232/16 and MIO-164E. We dont use any operator interface, only the
    original Teststand sequence-Editor and the Single-Pass Prozess-model.
    It works very fine for  e.g. a whole week running and then
    ,suddenly, the ERROR Window pops up :
    "Window-Head: Microsoft Visual c++ Runtime Library
    RUNTIME ERROR
    Programm ...\National Instruments\Teststand3.0\Bin\SeqEdit.exe
    R6025
    - pure virtual function call"
    After pressing the OK-Button, the Computer will boot and generate a memory-dump.
    We have analyzed the dump-file with the Microsoft WINdbg Tool.
    The Bugcheck Analysis reported an error with the Nidaq32k-Driver !!
    What should/can we do ?
    See below the analysis report:
    Debugging Details:
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for Nidaq32k.SYS -
    OVERLAPPED_MODULE:  kmixer
    FAULTING_IP:
    Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
    bc4370a0 c745fcffffffff   mov     dword ptr [ebp-0x4],0xffffffff
    DEFAULT_BUCKET_ID:  INTEL_CPU_MICROCODE_ZERO
    BUGCHECK_STR:  0xCB
    LAST_CONTROL_TRANSFER:  from 804bce30 to 80440665
    STACK_TEXT: 
    bc175c54 804bce30 80064bd4 00000000 804bd199 nt!MmCleanProcessAddressSpace+0x421
    bc175d04 804bd1b3 00000000 84973a28 80431261 nt!PspExitThread+0x4e1
    bc175d10 80431261 84973a28 bc175d48 bc175d3c nt!PsExitSpecialApc+0x1a
    bc175d4c 80465bfa 00000001 00000000 bc175d64 nt!KiDeliverApc+0x158
    bc175d4c 77e017da 00000001 00000000 bc175d64 nt!KiServiceExit+0x58
    WARNING: Frame IP not in any known module. Following frames may be wrong.
    0012f7a4 00000000 00000000 00000000 00000000 0x77e017da
    STACK_COMMAND:  .bugcheck ; kb
    FOLLOWUP_IP:
    Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
    bc4370a0 c745fcffffffff   mov     dword ptr [ebp-0x4],0xffffffff
    FOLLOWUP_NAME:  MachineOwner
    SYMBOL_NAME:  Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
    MODULE_NAME:  Nidaq32k
    IMAGE_NAME:  Nidaq32k.SYS
    DEBUG_FLR_IMAGE_TIMESTAMP:  3f39592e
    FAILURE_BUCKET_ID:  0xCB_Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
    BUCKET_ID:  0xCB_Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
    Followup: MachineOwner

    hello,
    unfortunately the msiBlast tool dont indicate the LV RTE 6.0 !, too.
    See attachment  .pdf file for all installed applications
    So it seems to be a other problem of the MAX Version 3.0, showing a LV RTE, which does not exists.
    (The expected folder ...\shared\LabVIEW Run-time\6.0 is not present, too.)
    Nevertheless i dont have any idea to solve the problem with the R6025 Error ?
    Note: In case of manually killing the LV TS RTE within the windows system control (testsequence is running) , a blue screen with error indication for nidaq32k.sys arises !?
    regards
    Attachments:
    msiblast-all.pdf ‏18 KB

  • Runtime error 4605 and word application crashing

    Hello Everyone,
    I wrote a script to add TAGs as comments of word document. The criteria of adding tag is based on outline numbering as document do not follow word styles, I had to use outline numbering for this purpose.
    There are couple of issues I am facing.
    1.) script is very slow and sometimes my word application crashes.
    2.) sometimes I get a runtime error 4605 'This command is not available' for line "Selection.Comments.Add Range:=Para.Range, text:="[" & sIdLabel & sCurrentNumber & "]" & vbCrLf  ' ID‘}"
    Here is my updated code
    'script to insert TAGs as comment based on word document outline.
    ' The format of TAG is provided by user and also the step by which TAG number need to be incremented
    Public Sub CreateOutline()
    Dim sIdLabel As String
    Dim sCurrentNumber As String
    Dim sStepNumber As String
    Dim Para As Paragraph
    Application.Templates.LoadBuildingBlocks
    'get the TAG format from user.
    sIdLabel = InputBox("Provide the TAG ID", "TS_FS_")
    sCurrentNumber = InputBox("Provide the Current number", "001")
    'get the step by which the TAG number is to be incremented everytime.
    sStepNumber = InputBox("Provide the step", "1")
    For Each Para In ActiveDocument.Paragraphs
    If Para.Range.ListParagraphs.Count = 1 Then
    Para.Range.Select
    Selection.Move wdParagraph, 1
    Selection.Comments.Add Range:=Para.Range, text:="[" & sIdLabel & sCurrentNumber & "]" & vbCrLf ' ID‘}
    sCurrentNumber = Format(Val(sCurrentNumber) + Val(sStepNumber), String(Len(sCurrentNumber), "0"))
    End If
    Next Para
    End Sub

    Hi Ashishk15,
    Since you were not able to reproduce the error every time, I suspect this issue maybe relative to the context of document you were handling.
    I am also trying to reproduce this issue in Word 2013 however failed. The code works well for me like figure below:
    >>2.) sometimes I get a runtime error 4605 'This command is not available' for line "Selection.Comments.Add Range:=Para.Range, text:="[" & sIdLabel & sCurrentNumber & "]" & vbCrLf  ' ID‘}"<<
    What's version of Word are you using and the exact error message? Can you add the comment manually? If yes, would you mind sharing with us a reproducible document to help us narrow down this issue. 
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Runtime Error! and cannot perform chkdsk

    It started when I found out that one of my picture files was corrupt. I cannot delete the folder and I get a message telling me to perform a chkdsk. When I try to do the chkdsk I get an error message that it cannot be completed.
    Now, when my scheduled backup started I got the following error message:
    "Runtime Error!
    Program:...m Files\Lenovo\Rescue and Recovery\Migration\bin\r2r.exe
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information."
    I'm hoping that someone will be able to help me.

    same problem here
    anyone?

  • I have adobe starter edition 3.2.I now get a message that a runtime error occurs and it won't open.

    I have a great number of fotos in this program. How can I save the fotos and get the program to open?
    I don't understand the runtime error message that appeared suddenly.

    Ouch!  That's one of the many reasons I detest applications that run on a library or catalog paradigm and hide your files where you can't access them externally.  They get discontinued, and the user is left hanging.
    Yes, Photoshop Album Starter Edition has been discontinued for many years.
    You don't specify your platform, but if you happen to be on a Mac, you could try extracting your images with File Juicer.  It will extract any and all images it finds inside any kind or type of file.
    http://echoone.com/filejuicer/
    Hopefully the Windows experts here can point to a Windows equivalent.

  • TS5376 I have been trying to install Itunes for the past 1.5 days without success.  The method outlined here did not work and gave me the same error messages as before  Runtime error R6034 and  also error 7

    I tried the latest Apple fix to resolve the installation issues of iTunes 11.1.4 and had no success at all.  This was the fix that asked you to remove .dll files and place them on the desktop before unistalling and reinstalling iTunes.  I followed the procedure exactly and obtained the same results as before.
    Namely,
    Runtime Error: R6034 -An application has made an attempt to load the C runtime library incorrectly
    iTunes was not installed correctly.  Error 7.
    At this point, after spending 1.5 days attempting to install iTunes I am giving up.  Hopefully, someone will come up with a fix that really works and I will install it then.

    Hi
    I had the same problem on my PC's with Win 7 and Win XP.
    I solved it this way:
    - De-install iTunes, best with a special tool, like, for example "Your Uninstaller" from Ursoft. Any other un-installer will do the job, provided it cleans the registry of traces from iTunes
    - De-install "Apple Mobile Device Support". This seems to be the culprit. It is a sub-program of iTunes. But if you just de-install iTunes this sub-program stays in your PC. If you still have it on your PC and you try to update to 11.1.4, it will cause these problems.
    - De-install also "Apple Application Support", but I am not sure it is really necessary, but de-installing does no harm, since it will be re-installed automatically.
    - De-install also "Apple Software Support", but I am not sure it is really necessary, but de-installing does no harm, since it will be re-installed automatically.
    - Re-start your PC
    - Download the latest version of iTunes from the Apple webpage and install it.
    For me this worked on both of my PC's.
    Regards
    goletto

  • HT201413 i get a runtime error "R6034" and windows error 1114?

    I get a "runtime error" R6034...and Windows error 1114. It started as i was updating latest iTunes version.

    https://discussions.apple.com/message/24619318#24619318

Maybe you are looking for