Runtime Error for Set text container

Hi I'm receiving a runtime error in IE for a set text for
container. Works in Firefox and Safari.
IE dubugging says its line 17 (which is the last line of
code):

Hi
1. Try to put WHERE conditions for KEY FIELDS.
Solution: Create a RANGE for the key fields & put that in SELECT Query.
DATA: gr_rueck TYPE RANGES OF afru-rueck.
SELECT .. WHERE rueck IN gr_rueck.
2. Avoid using CORRESPONDING FIELDS OF TABLE in SELECT.
Solution: Change internal table fields ORDER.
TYPES:
BEGIN OF TY_VORNR,
budat TYPE ..
pernr TYPE ..
aufnr TYPE ..
vornr TYPE ..
... " Other fields
END OF TY_VORNR.
SELECT .. INTO TABLE IT_VORNR ...

Similar Messages

When will Reader 9's Runtime error for redirected Application Data be fixed??

Has anyone heard when Adobe will fix Reader 9's Runtime error for redirected Application Data?? It's still happening with 9.1.3 for only users who have their Application Data folder redirected via Group Policy.
It's been going on for some time, as evidenced by the following link, and my own personal pain fighting this
http://forums.adobe.com/thread/391738?start=100&tstart=0

Also posted here: http://forums.adobe.com/thread/391738
I haven't read through all of the posts, but the general consensus I have is that the issue is in fact related to the redir
ection of the Application Data folder. The main issue being that the use of a UNC path causes the error described, with some mention to explicit user permissions on the root of the folder path.
I was just recently made aware of this issue in our environment. Apparently we've held off upgrading to Adobe 9.x because of this issue. After a little research, it was apparent that simply modifying the default Folder Redirection policies is not possible because the use of a mapped drive is not supported.
I haven't had a chance to test this yet, and may not be able to for some time, so I thought I would share this in case someone else might be able to test. The idea being to simply use a custom ADM file to force the redirection of certain profile folders. Again, I haven't tested this using a mapped drive in the path, but I have successfully used the same settings below to redirect other folders not available by default in Group Policy.
1) Copy the text between ----- Start of ADM ------ and ----- End of ADM ------ and paste it into a text file.
2) Rename the .txt to .adm.
3) Load the ADM template into a GPO.
4) Right click "USER Custom Settings", select "View", select "Filtering" and uncheck the option "Only show policy settings that can be fully managed".
5) Configure the "Redirect Application Data" option as enabled, and enter a mapped drive path.
6) Test.
I'm interested to hear if this is a viable solution or not.
------ Start of ADM -----
CLASS USER
      CATEGORY "USER Custom Settings"
            CATEGORY "Folder Redirection Settings"
                  POLICY "Redirect My Documents"
                  EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
                  KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                  PART "Redirect to" EDITTEXT
                        VALUENAME "Personal"
                        MAXLEN 255
                        DEFAULT ""
                        EXPANDABLETEXT
                  END PART
                  END POLICY ; RedirectHistory
                  POLICY "Redirect Application Data"
                  KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                  EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
                  PART "Redirect to" EDITTEXT
                        VALUENAME "AppData"
                        MAXLEN 255
                        DEFAULT ""
                        EXPANDABLETEXT
                  END PART
                  END POLICY ; RedirectHistory
                  POLICY "Redirect Cookies"
                  KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                  EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
                  PART "Redirect to" EDITTEXT
                        VALUENAME "Cookies"
                        MAXLEN 255
                        DEFAULT ""
                        EXPANDABLETEXT
                  END PART
                  END POLICY ; RedirectCookies
                  POLICY "Redirect Favorites"
                  KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                  EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
                  PART "Redirect to" EDITTEXT
                        VALUENAME "Favorites"
                        MAXLEN 255
                        DEFAULT ""
                        EXPANDABLETEXT
                  END PART
                  END POLICY ; RedirectFavorites
                  POLICY "Redirect History"
                  KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                  EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
                  PART "Redirect to" EDITTEXT
                        VALUENAME "History"
                        MAXLEN 255
                        DEFAULT ""
                        EXPANDABLETEXT
                  END PART
                  END POLICY ; RedirectHistory
                  POLICY "Redirect Recent Documents"
                  KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                  EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
                  PART "Redirect to" EDITTEXT
                        VALUENAME "Recent"
                        MAXLEN 255
                        DEFAULT ""
                        EXPANDABLETEXT
                  END PART
                  END POLICY ; RedirectRecent
            END CATEGORY
      END CATEGORY
------ END of ADM -----

Field in portal table for the text contained in an uploaded file

I have uploaded a file of base item type file into release 2 of the portal.
Does anyone know which table the clob field for the text contained in
the uploaded file is stored?
Thanks,
Suzanne

Hi,
When you run the Search hep is it giving the description or not
You have to create the serarch help with both the fieldname and its description field then we cna the values. Or
Try to mantain the text table for this field and get the data.
Get the valeusinto drop drown with this table Or create the SearchHelp for this text table
Regards
Lekha

ABAP runtime error for 0CRM_OPPT_H and I while running RSA3

hello Gurus,
 I'm having problems while running RSA3 transaction for these data sources.
0CRM_OPPT_H
0CRM_OPPT_I
0CRM_SALES_ACT_1
0CRM_SALES_ACT_I.
I'm getting ABAP runtime error for these.
This is the error:
Runtime Error CALL_FUNCTION_CONFLICT_TAB_TYP
Exception CX_SY_DYN_CALL_ILLEGAL_TYPE
I tried finding OSS notes for these, but I didnt succeed.
I activated the data source from RSA5, and then I tried RSA3. That time I got Errors occurred during extraction.
After that I activated delta at BWA5, then I started getting runtime error.
Even though I activated at BWA5, I am not able to see the data sources at BWA7.
Am I missing any thingplease guide me through this.
Thanks
RKR

Thanks for your replay... All the DS and related tables are active..
But wen I tried to re-generate the DS again... this is the warning I'm getting... Any idea why I'm getting this....
The even-numbered length of the DEC field SAMPLE_QTY_ALLOW can lead to problems
Message no. R8569
Diagnosis
You want to use the field SAMPLE_QTY_ALLOW in the extract structure for DataSource 0CRM_OPPT_I. This field has a field of type 'DEC' (or 'CURR' or 'QUAN') with an even number of characters.
This can create problems since the length resulting from calculations in ABAP (for example, in extractors or Customer Exits for extraction) is too large to be inserted in the database later (PSA in BW), causing a short dump.
Procedure
This warning is only relevant when the maximum length of this field is exceeded during extraction, for example when the field is expanded in the Customer Exit through a calculation.
More information and a remedy can be found in SAP Note 641744.
When I search the OSS note, SAP suggesting to apply 883310 note.
In my company we are using CRM 4.0 servie pak8. SAP suggsting to install service pak 11, but my client is not interested to upgrade to 11 as CRM people are working on service pak 8.
By any chance we can use specific note which change the ABAP code to solve this problem... Please give me some suggetions...
Thanks
RKR

[svn:fx-trunk] 5353: * Added compiler error for Halo Navigators containing non-Containers

Revision: 5353
Author: [email protected]
Date: 2009-03-17 12:59:06 -0700 (Tue, 17 Mar 2009)
Log Message:
* Added compiler error for Halo Navigators containing non-Containers
as their first level child.
tests Passed: checkintests
Needs QA: YES
Needs DOC: NO
Bug fixes: SDK-19317
API Change: NO
Reviewer: Pete F.
Code-level description of changes:
compiler/mxml/lang/StandardDefs.java
Added getContainerPackage(), isHaloNavigator(), CLASS_VIEWSTACK,
CLASS_ACCORDION, and PACKAGE_MX_CONTAINERS.
compiler/mxml/builder/ComponentBuilder.java
Modified
ComponentBuilder.ComponentAttributeHandler.nestedDeclaration() to
report an error if a non-container is declared as a child of a
Halo navigator.
compiler_en.properties
Added HaloNavigatorsRequireHaloContainerChildren message.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19317
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ComponentBuilder.jav a
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties

Runtime Error when setting sync parameters for Outlook - what to do?

In Desktop Manager, I configure Synchronization to use with Outlook so I can pull my calendar onto the Blackberry. It lets me set it up and then gives me a Runtime Error - Cannot find system in table file. I have Comcast email setup in Outlook, but previously had used Outlook Express when I bought the Blackberry. Could this be part of the problem and if so, how do I fix it?
Thanks for any help you can offer...

This bug should be fixed in SDK 4.5. Please use the latest SDK.
My environment is FlashBuilder 4.5 premium and its default SDK 4.5. It's all right on my machine.
Thanks

Runtime errors for Branched in SXMB_MONI

Hi,
After PI 7.0 has been upgraded to SPS16, every time I try to display a message in status "Branched" from SXMB_MONI I get a runtime error. Also I got an error when trying to display it from RWB Monitor.
Messages in other statuses donu2019t have problems
Any suggestion why is that? Thanks.
Janos

Hi,
It is error Message_type_X, but I don't think it is a SAPGUI problem, since I got the same problem with SAPGUI 710 and SAPGUI 640
Bellow is the extract from ST22.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          22.09.2008 13:50:43
Short text
    The current application triggered a termination with a short dump.
Error analysis
    Short text of error message:
    Control Framework : Error processing control
    Long text of error message:
     Diagnosis
         An error occurred when the system tried to process the commands
         from the Automation Queue on the presentation server.
         There are several possible reasons for this:
         - The installation of the SAP GUI on the presentation server is
         faulty or obsolete.
         - There is an error in the application program
         - There is an error in the SAPGUI or an integrated control
     Procedure
         1. Make sure that you have imported the appropriate Support
         Package, the current kernel, and GUI patch for the release of your
         system
         2. Check whether the error occurs locally on one or a few PCs, or
         generally on all PCs. Note whether the error only occurs for some
         users, for example because of a specific Customizing setting.
         If it only occurs locally, this suggests an installation problem
         with the PC. Check the installation; if necessary, reinstall the
         software. In the dump, search for the SY-MSGLI field, since it may
         point to the cause of the error.
         3. Activate the Automation Trace (in accordance with SAP Note
         158985).
         4.Start the transaction and continue until the screen immediately
         before the dump.
         5. From the System -> Utilities menu, choose Autom. Queue,
         Synchronous Processing.
         The status bar of the GUI displays the text:
            "Automation synchron flush mode on"
         6. If you now proceed with the application, the short dump will
         display the ABAP call that caused the error; the Automation Trace
         will contain the error on the presentation server.
         7. If necessary, load the short dump and trace files on to
         sapservX, so that SAP can analyze them.
    Technical information about the message:
    Message class....... "CNDP"
    Number.............. 006
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLOLEA" or "LOLEAU02"
    "AC_SYSTEM_FLUSH"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Runtime error for assign

hello all,
i ahve following snippet of code
DATA: BEGIN OF lt_temp,
 buffer(30000),
 END OF lt_temp.
FIELD-SYMBOLS: <l_wa> TYPE ANY,
 <l_comp> TYPE ANY.
ASSIGN lt_temp TO <l_wa> CASTING TYPE (p_table).
if i give p_table value such as AUSP (which contains FLTP fields), i am getting a runtime error at ASSIGN statement as below.
(((((((In the current program "SAPLY_TEST", an error occurred when setting the
field symbol "<WA>" with ASSIGN or ASSIGNING (maybe in the combination with
the CASTING addition).
When converting the base entry of the field symbol "<WA>" (number in base
table: 33986), it was found that the target type requests a memory
alignment of 8.
However, the source data object has an invalid memory alignment, that is
an alignment not divisible by 8.))))))))
for other tables its working fine.
How can i rectify the error?
any help is greatly appreciated.
Thank you in advance.

Why don't you keep it simple as this?
DATA: TEST_DATA TYPE REF TO DATA,
 P_TABLE TYPE STRING.
FIELD-SYMBOLS: <FS> TYPE ANY.
P_TABLE = 'SPFLI'.
CREATE DATA TEST_DATA TYPE (P_TABLE).
ASSIGN TEST_DATA->* TO <FS>.
Greetings,
Blag.

Portal Runtime Error for WPC user

Hi experts,
I assign wpc_editor_role for my user. But he is getting Portal Runtime error everytime he try to create link list/teaser/paragraph, publish webpage, finish webpage. The error is as follows:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 10:55_27/05/09_0002_21582350
Refer to the log file for details about this exception.
For your information, the WPC is working fine for administrator ID. Please help me to solve this problem.
Rgds,
Nanie Arianie

Nanie,
Please ensure that you have the permissions set as per this help.
[Defining Permissions in the Portal Content Studio|http://help.sap.com/saphelp_nw70/helpdata/EN/45/f91dd13c7a04aae10000000a114a6b/content.htm]
[Setting Initial Permissions for Folders|http://help.sap.com/saphelp_nw70/helpdata/EN/a6/78aa5c2ab64c1d83db59a25793e9eb/content.htm]
This should ensure that your issue is taken care of.
Good Luck.
Cheers!
Sandeep Tudumu

Runtime Error For Converting Static pdf to Dynamic Xml Form pdf

Hi All,
I am converting my static pdf to dynamic xml form pdf using Adoble Livecycle Designer ES 8.2 it is giving runtime error dialog.
My static pdf size is 12MB and it contains 46 pages(mostly all pages will have images). Do we have any limitations for converting static pdf to dynamic xml form pdf ?
Error message image file is attatched to this thread.
Can any body please help me on this.
Advance Thanks
Prasad Sagala

Hi Paul,
With out dividing into smaller chunks, Do we have any other alternative?
Because in my other pdf reports having more than 50 pages (in between 100-600). If i want do divide smaller chunks it will be the long process.
Thanks
Prasad Sagala

Runtime error for SELECT statement

Hi All,
I have written a SELECT statement as follows in my code.
select budat pernr aufnr vornr from AFRU
into corresponding fields of table it_vornr
for all entries in it_cats_tmp
where budat = it_cats_tmp-workdate
and pernr = it_cats_tmp-pernr
and aufnr = it_cats_tmp-rnplnr.
The table IT-CATS_TMP is having around 3000+ lines.
When control moves to this statement, the system is throwing Runtime error or its taking around 30 minutes time to execute.
If i query the same table (AFRU) in SE11 for the same set of conditions, the table displays relevent data immediately.
What might be the reason for this delay/Runtime Error?
Shall i need to change the syntax for better performance?
Your guidelines are highly appreciated......
Regards
Pavan

Hi
1. Try to put WHERE conditions for KEY FIELDS.
Solution: Create a RANGE for the key fields & put that in SELECT Query.
DATA: gr_rueck TYPE RANGES OF afru-rueck.
SELECT .. WHERE rueck IN gr_rueck.
2. Avoid using CORRESPONDING FIELDS OF TABLE in SELECT.
Solution: Change internal table fields ORDER.
TYPES:
BEGIN OF TY_VORNR,
budat TYPE ..
pernr TYPE ..
aufnr TYPE ..
vornr TYPE ..
... " Other fields
END OF TY_VORNR.
SELECT .. INTO TABLE IT_VORNR ...

Runtime error for Audit Log reports

Hi,
I have activated Reports feature at Site Collection level and then tried to run custom report for Dashboard library under Audit Log Reports but I got Run Time error. I tried on my local machine and on server.
Can any body let me know how to resolve this issue to get custom report?
Any help would be appreciated.
BELOW IS THE ERROR MESSAHE:
Server Error in '/' Application
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed
by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
AEDLA.

The audit log reporting is kind of tricky to work with...until you know what you're doing.
Some things to check: Do you have the Reporting feature enabled? Do you have auditing enabled on sites in this site collection? Have any events been triggered that would have written to the audit logs? Did you specify an output library
for the report? Will the report have any data?
Also, look at the SharePoint logs in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\ and let us know any "Unexpected" errors.
Bob Guidinger
Please remember to click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

Runtime Error for MS Visual C++ Runtime Library

First off, thanks for taking the time to read this.
When I attempt to start up iTunes, I get a message with the following info....
"Microsoft Visual C++ Runtime Library
Runtime Error!
Program: D:\Program Files\iTunes\iTunes.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
Any assistance / advice would me much appreciated. Thanks!
- Doug
HP Pavilion a1250n Windows XP
HP Pavilion a1250n Windows XP

HI,dougsoulang
i had ur problem too and know how u solve it!
just do the following steps and u can use ur itunes again:
1. go to ur windows software menu.
2. click repair at: itunes, quicktime and apple software update.
3. start => all programs => appple software update
4. install the available updates (should be itunes + quicktime)
5. be happy about being able to use itunes again

Portal Runtime Error for MSS Iviews

Hi all,
Though this topis has been discussed several times in our forum, i could not make anything from it.
Portal Runtime Error

An exception occurred while processing a request for :
iView : pcd:portal_content/com.ssmcehr.ssmcehr/com.ssmc.pct.ehr.mss.folder.mss/com.ssmc.pct.ehr.mss.folder.roles/com.ssmc.pct.ehr.mss.role.mss_mgrs/com.ssmc.pct.ehr.mss.workset.manager_self_service/manager_self_service/com.ssmc.pct.ehr.mss.worksets.employee_information/com.ssmc.pct.ehr.mss.page.employee_career/com.ssmc.pct.ehr.mss.iview.pay_actions
Component Name : com.sap.pct.hcm.eeprofilegenericiviewtable.default
The exception was logged. Inform your system administrator..
Exception id: 09:51_08/12/06_0067_101532150
See the details for the exception ID in the log file

and the error log file ...

#1.5#00142216FF7C00640000003F000022F80004240E23838D08#1165543050906#com.sap.security#sap.com/irj#com.sap.security.logToFile#Guest#19####76b39fa0865f11db815c00142216ff7c#SAPEngine_Application_Thread[impl:3]_16##0#0#Error#1#/System/Security/Audit#Plain###Guest | LOGIN.ERROR | NONE = null | | Login Method=[default], UserID=[jothi], IP Address=[137.55.161.180], Reason=[Access Denied.]#
#1.5#00142216FF7C006100000031000022F80004240E23BE4303#1165543054765#com.sap.portal.ivs.semantic.systemLandscape#sap.com/irj#com.sap.portal.ivs.semantic.systemLandscape#Guest#19####790075d0865f11dba82400142216ff7c#SAPEngine_Application_Thread[impl:3]_15##0#0#Error#1#/System/Server#Java###Failed to get alias mappers sub context in the Portal Registry##

This occurs only for the LDAP users,if we create user in EP(manually) it's working fine..
Thanks in Advance,
Jothi.P

It got resolved by itself after restarting the Java server.

ABAP RunTime Error for tcode : TS01

Hi Friends,
Actually we are getting the run time error while creating the standard security transaction using TS01.
After entering the data in the first screen -- click on the enter -- enter the details inside & click on save button--then it will go run time error.
Here while calling the method, we are getting the run time error.
call method cl_class_position_op_trs=>trs_flows_calculate_tax
 exporting
 im_tab_flow = L_TAB_FLOWS
 im_company_code = l_company_code
 im_security_account = l_security_account
 im_security_id = l_security_id
 receiving
 re_tab_flow = RE_TAB_FLOWS
 exceptions
 failed = 1
 others = 2.
if sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4
 RAISING FAILED.
endif.
Actuallly here the problem with the class becuase the class cl_class_position_op_trs itself has error.
In the class , in the local classes they are calling again the class cl_class_position_op_trs. becasue of this reason it was going to run time error.
So we are getting the run time error.
We have OSS note for the same problem.But i am unable to implement that.
Please guide me how to implement the OSS note 751947.(Note 751947 - TRS: Syntax error due to ABAP Compiler)
please find the error details:
Runtime Errors SYNTAX_ERROR
 Occurred on 03/12/2008 at 00:26:57
Syntax error in program "CL_CLASS_POSITION_OP_TRS======CP ".
What happened?
The following syntax error occurred in the program
CL_CLASS_POSITION_OP_TRS======CP :
"Components of classes declared using "CLASS CL_CLASS_POSITION_OP_TRS D"
Error in ABAP application program.
The current ABAP program "CL_CLASS_POSITION_TRS=========CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_CLASS_POSITION_OP_TRS======CP
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion date.
Error analysis
The following syntax error was found in the program
CL_CLASS_POSITION_OP_TRS======CP :
"Components of classes declared using "CLASS CL_CLASS_POSITION_OP_TRS D"
Regards.
Lakshmi
Edited by: lakshmi podile on Mar 14, 2008 8:08 AM

Did you go through the steps in the note?
Use transaction SE24 to distribute the local classes into new include structures as follows:
Call transaction SE24 for the class CL_CLASS_POSITION_OP_TRS.
Select the following menu option:
Goto --> Class-local types --> Local Class Definitions/Types
Confirm the message that proposes conversion into the new structures.
Choose Utilities --> Regenerate sections from the menu.
Activate the class and all changed objects.
Try and do this, and see what happens.
Good luck.

Runtime Error for Set text container

Similar Messages

Maybe you are looking for