Runtime Error Getting While Executing Transaction ME47.

Hi Exports,
i am facing a problem in transaction ME47 For Maintaing Quotation.
if i enter RFQ Number and exceute, i am getting Runtime Error. This is happening in only in Test Server. Development and production it is working fine.
Error Details are given below.
ShrtText
    Screen does not exist
What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLXM06" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    The program had to be terminated.
Error analysis
    Program "SAPLXM06" tried to use screen 0301.
    The screen does not exist.
Trigger Location of Runtime Error
    Program                                 SAPLXM06
    Include                                 MM06EO0C_CUSTSCR1_HEAD_SET_DAT
    Row                                     10
    Module type                             (FUNCTION)
    Module Name                             EXIT_SAPLEINM_013
Source Code Extract
Line SourceCde
    1 ----
    2 *       MODULE CUSTSCR1_HEAD_SET_DATA OUTPUT                          *
    3 ----
    4 *       ........                                                      *
    5 ----
    6 MODULE CUSTSCR1_HEAD_SET_DATA OUTPUT.
    7
    8   PERFORM CUSTSCR1_HEAD_SET_DATA_PBO using fc_call.
    9
>>>>> ENDMODULE.
Thanks,
Satheesh.

This apepars to be customer code (exit). Have you verified that the programs, objects involved are identical in Test, Dev and Prod? Checked the transport logs to Test?

Similar Messages

Runtime Errors: CONVT_OVERFLOW while executing transaction sm66

Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
Date and Time          02.04.2011 00:41:01
Short text
     Overflow when converting from "2.90113e+09"
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "2.90113e+09",
     an overflow occurred.
     There is probably an error in the program
     "SAPLTHFB".
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     please use the following search criteria:
     "SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
    To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
    To obtain this, call the system log with Transaction SM21
    and select the "Print" function to print out the relevant
    part.
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
    Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
    The main program was "SAPMSM66 ".
    In the source code you have the termination point in line 82
    of the (Include) program "LTHFBU26".
    The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
     occurred in
    procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLTHFB "; its source code begins in line
    1 of the (Include program "LTHFBU26 ".

Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
Date and Time          02.04.2011 00:41:01
Short text
     Overflow when converting from "2.90113e+09"
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "2.90113e+09",
     an overflow occurred.
     There is probably an error in the program
     "SAPLTHFB".
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     please use the following search criteria:
     "SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
    To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
    To obtain this, call the system log with Transaction SM21
    and select the "Print" function to print out the relevant
    part.
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
    Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
    The main program was "SAPMSM66 ".
    In the source code you have the termination point in line 82
    of the (Include) program "LTHFBU26".
    The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
     occurred in
    procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLTHFB "; its source code begins in line
    1 of the (Include program "LTHFBU26 ".

Runtime error "DATA_INCONS_IN_EXIT_MANAGEM" while executing a BADI

Hi Experts,
I am trying to use a BADI in my report Program.
But it is throwing a runtime error "DATA_INCONS_IN_EXIT_MANAGEM".
I debugged the program and found that the call to the GET_INSTANCE method of Class CL_EXITHANDLER is raising this error.
It is because the instance parameter is Initial.
Can you please let me know, what is the mistake i am doing.
My report code is as follows:
*& Report Z_GKR_BADI_01
REPORT z_gkr_badi_01.
CLASS cl_exithandler DEFINITION LOAD.
DATA: l_badi_instance TYPE REF TO zif_ex_gkr_matnrdata,                 "BADI Interface
      mara LIKE mara.
PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY.
START-OF-SELECTION.
CALL METHOD cl_exithandler=>get_instance
    EXPORTING
      exit_name              = 'ZGKR_MATNRDATA'                                                                   "BADI Definition Name
      null_instance_accepted = 'X'
    CHANGING
      instance               = l_badi_instance.
CALL METHOD l_badi_instance->get_materials
    EXPORTING
      matnr = p_matnr
    IMPORTING
      mara = mara.
WRITE: /5 mara-matnr,
            mara-matkl,
            mara-meins.
Cheers
Gaurav Raghav

Hi lakshmi,
I am new to BADI and i am doing a tutorial.
The Complete Code is given with at the thread starting.
In the Interface method i am retreiving Material details from the table MARA based on MATNR.
The code is as follows:
*& Report Z_GKR_BADI_01
REPORT z_gkr_badi_01.
CLASS cl_exithandler DEFINITION LOAD.
DATA: l_badi_instance TYPE REF TO zif_ex_gkr_matnrdata,
      mara LIKE mara.
PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY.
START-OF-SELECTION.
CALL METHOD cl_exithandler=>get_instance
    EXPORTING
      exit_name              = 'ZGKR_MATNRDATA'
      null_instance_accepted = 'X'
    CHANGING
      instance               = l_badi_instance.
CALL METHOD l_badi_instance->get_materials
    EXPORTING
      matnr = p_matnr
    IMPORTING
      mara = mara.
WRITE: /5 mara-matnr,
            mara-matkl,
            mara-meins.
Interface Method Implementaion in BADI
METHOD zif_ex_gkr_matnrdata~get_materials.
IF NOT matnr IS INITIAL.
    SELECT SINGLE *
      FROM mara
      INTO mara
      WHERE matnr = matnr.
ENDIF.
ENDMETHOD.
I checked and i didn't find the entry in the table mentioned by you.
But isnt the entry supposed to come automatically once i define the BADI.
The BADI Definition name is ZGKR_MATNRDATA.
Please help me regarding the same.

Error getting while executing report scripts

while iam trying to execute a report script,the following error iam getting.
"java.lang.ArrayIndexOutofBoundsException:0"
pls help me.

Can you run any of the sample report scripts in EAS? For example, try running one or more of the scripts shipped with Sample Basic in the environment.
Tim Tow
Applied OLAP, Inc

Unexpected error [0x8CFB0B0] while executing command 'Get-LinkedRoleGroupForLogonUser'

Hi Experts....
I am facing a weired error when connecting to Exchange On-Premises...
I have 2 virtual machines in Virtual-Box .On 1st machine I has installed Active Directory..
On 2nd machine I have to install Exchange Server.I have joined the second machine in the domain.
After Installing all the pre-requisites and updates for Exchange when I open the exchange management console I faced the following error....
Initialization Failed
The following error occurred when retreiving user information for 'ABC\Administrator':
Unexpected error [0x8CFB0B0] while executing command 'Get-LinkedRoleGroupForLogonUser'
Click here to Retry
Can anyone help me in this regard....!!!!
Thank You...!!!!

Hi,
From the error description, I recommend open C:\Program Files\Microsoft\Exchange Server\V14\RemoteScripts, check the ConsoleInitialize.ps1 file, find "function global:Get-LinkedRoleGroupForLogonUser()", here is the right file of this part for your reference.
foreach ($sid in $sids)
         try
           $accountName = $sid.Translate([System.Security.Principal.NTAccount]).Value
         catch
           continue
         if ($accountName -ne $null)
           foreach ($roleGroup in $allLinkedRoleGroups)
             if ([string]::Compare($roleGroup.LinkedGroup,$accountName,$True) -eq 0)
               $roleGroup
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David Baur

I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur

An unknown error occurred while executing the PowerShell script:

Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name:      Microsoft-Windows-PowerShell/Operational
Source:        Microsoft-Windows-PowerShell
Date:          4/9/2015 3:27:04 PM
Event ID:      4100
Task Category: Executing Pipeline
Level:         Warning
Keywords:      None
User:          mmmmmm\paufra
Computer:      tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
        Severity = Warning
        Host Name = Default Host
        Host Version = 4.0
        Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
        Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
        Engine Version = 4.0
        Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
        Pipeline ID = 16
        Command Name = Get-SCReplicationGroup
        Command Type = Cmdlet
        Script Name =
        Command Path =
        Sequence Number = 91
        User = mmmmmm\paufra
        Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
    <EventID>4100</EventID>
    <Version>1</Version>
    <Level>3</Level>
    <Task>106</Task>
    <Opcode>19</Opcode>
    <Keywords>0x0</Keywords>
    <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
    <EventRecordID>285</EventRecordID>
    <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
    <Execution ProcessID="2344" ThreadID="4076" />
    <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
    <Computer>tools-francis.mmmmmm.com</Computer>
    <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
    <Data Name="ContextInfo">        Severity = Warning
        Host Name = Default Host
        Host Version = 4.0
        Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
        Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
        Engine Version = 4.0
        Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
        Pipeline ID = 16
        Command Name = Get-SCReplicationGroup
        Command Type = Cmdlet
        Script Name =
        Command Path =
        Sequence Number = 91
        User = mmmmmm\paufra
        Shell ID = Microsoft.PowerShell
</Data>
    <Data Name="UserData">
    </Data>
    <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>

Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

SCSM2012 Beta installation problem: An error occurred while executing a custom action:_PopulateUserRoles

I'm installing the SCSM2012 Management Server
component on a SQL dev box. During the installation, the very last step (Import Management Packs) fails with this error:
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
I've already verified that the account I'm logged in with has SA access to the SQL database. Windows 2008 R2 firewall is turned off.....
Has anybody else run into this problem?

I don't see anything indicative in the setup log. The setup seems to get all the way to the part where it installs the management packs. Then right after that is when the installation fails and it rolls back.
From the setup log, towards the end:
Property(S): ACTIONSUSER = NETWORK SERVICE
Property(S): ACTIONSDOMAIN = NT AUTHORITY
Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
Property(S): ProductToBeRegistered = 1
MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
=== Logging stopped: 11/7/2011 17:33:22 ===
MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/7/2011 17:33:23 ===

XL reporter error occurred while executing report! Rows: 25203 Columns: 30

An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.

Hello pls
follow below procedure
start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
regards
Jenny

An error occurred while executing a custom action:_PopulateUserRoles

I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this roll

After this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
These are the steps (I had to create the DWORD 32 bit):
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
On the Edit menu, point to
New, and then click DWORD Value.
Type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type 60000, and then click
OK.
This value represents the time in milliseconds before a service times out.
Restart the computer.
Hope this helps!
BR,
Robert
Robert

ABAP dump while executing transaction *PC00_M99_CIPE*

Hi,
Getting ABAP dump while executing transaction PC00_M99_CIPE ,hence cannot do payroll posting .
    Information on where terminated
    Termination occurred in the ABAP program "CL_HRFPM_CD_CLOSING_HANDLER===CP" -
     in "GET_FM_POS_CHECK_DATA".
    The main program was "RPCIPE00 ".
    In the source code you have the termination point in line 13
    of the (Include) program "CL_HRFPM_CD_CLOSING_HANDLER===CM00E".
We have recently upgraded our patch level.
SAP_OCS(SPAM/SAINT)          SAPKD70026            SAPKD70033
SAP_ABA                                SAPKA70012            SAPKA70018
SAP_BASIS                              SAPKB70012           SAPKB70018
PI_BASIS                                 SAPKIPYJ7B            SAPKIPYJ7I
SAP_BW                                  SAPKW70012           SAPKW70020
SAP_AP                                   SAPKNA7008           SAPKNA7015
SAP_APPL                                SAPKH60009           SAPKH60015
SAP_HR                                  SAPKE60028            SAPKE60039
EA-HR                                     SAPKGPHD07          SAPKGPHD26
Kindly guide me.
Regards,
Rachel

thanks for the quick response.
By applying note 1137655,problem got resoved.
FORM CHECK_CMTNT_UPDATE_CLOSED
Delta001
Context Block
FORM check_cmtnt_update_closed
           USING
              u_key_date TYPE begda
           CHANGING
              c_flg_cmtnt_closed.
Delete Block
DATA ls_encumb_iv TYPE t77hrfpm_encumb.
DATA l_gsval TYPE t77s0-gsval.
DATA ls_fm_pos_key TYPE hrfpm_fm_doc_pos-key_pos.
DATA lx TYPE REF TO cx_hrfpm.
STATICS so_closing_handler TYPE REF TO cl_hrfpm_cd_closing_handler.
CLEAR c_flg_cmtnt_closed .
*--- old switch from note??? active?
*--- if so: use the old logic
cl_hr_t77s0=>read_gsval(
    EXPORTING
      grpid       = 'HRFPM'
      semid       = 'CHKAC'
    IMPORTING
      returnvalue = l_gsval ).
TRY.
      IF NOT l_gsval IS INITIAL .
        TRY.
            c_flg_cmtnt_closed = 'X'.
Insert Block
DATA: ls_encumb_iv TYPE t77hrfpm_encumb.
STATICS:
      s_gsval TYPE t77s0-gsval,
      s_gsval_read TYPE flag.
IF s_gsval_read IS INITIAL .
    SELECT SINGLE gsval
       FROM t77s0
      INTO s_gsval
      WHERE grpid = 'HRFPM'
        AND semid = 'CHKAC' .
    s_gsval_read = 'X'.
ENDIF.
CLEAR c_flg_cmtnt_closed .
TRY.
      c_flg_cmtnt_closed = 'X'.
Delta002
Context Block
    CATCH
        cx_hrfpm_db_operation
        cx_hrfpm_ad_customizing .
Delete Block
        ENDTRY.
      ELSE.
*--- using closed period functionality of PBC
        IF so_closing_handler IS INITIAL .
          CREATE OBJECT so_closing_handler.
        ENDIF.
        IF so_closing_handler->consumption_in_closed_period(
                   i_key_date = u_key_date
                   is_fm_pos_key = ls_fm_pos_key )
             IS INITIAL.
          c_flg_cmtnt_closed = 'X'.
        ENDIF.
      ENDIF.
    CATCH cx_hrfpm INTO lx.
    lx->raise_sy_message( ).
ENDTRY.
ENDFORM.                    "check_cmtnt_update_closed
Insert Block
ENDTRY.
ENDFORM.                    "check_cmtnt_update_closed

ODBC error occurred while executing SQLExtendedFetch to retrieve the result

Good morning everyone,
I had the following error message while trying to run a simple query in Answers with 3 dimensional columns, 1 fact, and 4 calculated facts...
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1001 code: 0 message: [Oracle][ODBC]Memory allocation error.. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
It's taking around 2,5 minutes to run, then it give that error message.
Has anyone got any ideas on where I should get started?
Update: after 2nd time - it's running fine....I've added a filter...could this be the issue? Too many rows initially?

Damon,
you were correct - it was indeed an ODBC issue. Switching to OCI has fixed the issue. This link was also very helpful:
regarding performance
In my case, the problem with OCI happened because I was using System DSN name instead of how it's called in tnsnames.

Runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN key word

Hi All,
I'm getting a runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN keyword in the below statement,
ASSIGN L_XVALUE(L_LENGTH) TO <TEXTLINE> TYPE 'C'. "see 581444
Here L_XVALUE is of type X with value 'ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S' , L_LENGTH is of type I with value 51 and <TEXTLINE> is of type C wih one character length .
Should I have to declare <TEXTLINE> as same as that of L_XVALUE ( type X ).
Thanks in Advance,
Sabu.

Decalre <TEXTLINE> as type any.

Error encountered while executing the transform

My message failed at orchestration with the following error. Kindly help in finding the issue.
xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload(df91e55f-c6aa-914d-f042-acdb45bdcaf4)'.
The service instance will remain suspended until administratively resumed or terminated.
If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
InstanceId: cc8fac84-47dc-4d31-be15-80c9f86ffaac
Shape name: CodecoMapping
ShapeId: 32b0a92d-82f7-4b3a-8e22-a94b53bf2804
Exception thrown from: segment 1, progress 22
Inner exception: Error encountered while executing the transform Ibox.UNEDIFACT.CODECO.Orchestration.CodecoMap. Error:Transformation failed..
Exception type: XTransformationFailureException
Source: Microsoft.XLANGs.Engine
Target Site: Void ApplyInMemoryTransform(System.Type, Microsoft.XLANGs.RuntimeTypes.TransformMetaData, System.Object[], System.IO.Stream[])
The following is a stack trace that identifies the location where the exception occured
   at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
   at Microsoft.XLANGs.Core.Service.ApplyTransform(Type mapRef, Object[] outParams, Object[] inParams)
   at Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload.segment1(StopConditions stopOn)
   at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
Additional error information:
        Exception has been thrown by the target of an invocation.
Exception type: TargetInvocationException
Source: mscorlib
Target Site: System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
The following is a stack trace that identifies the location where the exception occured
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver resolver)
   at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, Stream output, XmlResolver resolver)
   at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
Additional error information:
        Attribute and namespace nodes cannot be added to the parent element after a text, comment, pi, or sub-element node has already been added.
Exception type: XslTransformException
Source: System.Data.SqlXml
Target Site: Void ThrowInvalidStateError(System.Xml.XPath.XPathNodeType)
The following is a stack trace that identifies the location where the exception occured
   at System.Xml.Xsl.Runtime.XmlQueryOutput.ThrowInvalidStateError(XPathNodeType constructorType)
   at System.Xml.Xsl.Runtime.XmlQueryOutput.ConstructInEnumAttrs(XPathNodeType rootType)
   at System.Xml.Xsl.Runtime.XmlQueryOutput.WriteStartAttribute(String prefix, String localName, String ns)
   at <xsl:template name="compiler:generated"> (36)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current, Double {http://schemas.microsoft.com/BizTalk/2003/var}var:v237,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v239, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v240, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v242, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v244,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v246, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v248, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v250, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v252,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v255, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v256, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v258, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v259,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v261, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v262, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v264, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v265,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v267, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v268, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v271, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v272,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v281, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v283, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v284, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v286,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v287, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v289, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v290, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v292,
String {http://schemas.microsoft.com/BizTalk/2003/var}var:v295)
   at <xsl:template name="compiler:generated"> (12)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
   at <xsl:template match="/s2:Root">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
   at <xsl:template match="/">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
   at Root(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
   at Execute(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
   at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlSequenceWriter results)
   at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer)
   at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver documentResolver)

Hi,
It is clearly an issue in your map. You can test your map out of Orchestration to make sure it is working.
"Exception has been thrown by the target of an invocation" is a very generic exception. you
need the inner exception to see the actual error. You can also try to test the map in the MapTester tool. It also shows also the inner exception. It's designed for BizTalk 2010 but with the .exe file you maybe also can test BizTalk 2006 maps,.
http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Error occurred while Executing XL report

Hi,
I am getting the following error when i generate the XL report
<b>An error occurred while Executing report!
Description: Can't show non-modal form when modal form is displayed</b>
Regards,
Aravindhan.R

Hi!
You are probably editing a cell, if you exit the cell you are standing in (editing) the report should run properly

Runtime Error Getting While Executing Transaction ME47.

Similar Messages

Maybe you are looking for