Runtime Error -GETWA_NOT_ASSIGNED when running COI
Hi ALL,
We are getting run time error - GETWA_NOT_ASSIGNED when running COI tasks.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32995).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"GETWA_NOT_ASSIGNED" C
"CL_UC_COI_ACT_PT==============CP" or "CL_UC_COI_ACT_PT==============CM00P"
"REDUCE_GOODWILL_ENTRIES"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "CL_UC_COI_ACT_PT==============CP"
in "REDUCE_GOODWILL_ENTRIES".
The main program was "UCUWB000 ".
The termination occurred in line 722 of the source code of the (Include)
program "CL_UC_COI_ACT_PT==============CM00P"
of the source code of program "CL_UC_COI_ACT_PT==============CM00P" (when
calling the editor 7220).
702 call method do_inv_net_change->create_data_reference
703 exporting
704 i_type = cl_uc_coi_inv_net=>gc_ref_pt_block
705 io_model = do_model
706 importing
707 er_data = lr_t_data.
708 assign lr_t_data->* to <lt_share_block>.
709 call method do_inv_net_change->get_block
710 importing
711 et_pt_shares = <lt_share_block>.
712
713 create data lr_s_data like line of <lt_share_block>.
714 assign lr_s_data->* to <ls_share_block>.
715 * change due to selling invor's transaction
716 read table <lt_share_block> into <ls_share_block> index 1.
717
718 * direct shares prior to divestiture
719 assign component 'R_TH_DSH_OLD'
720 of structure <ls_share_block> to <lr_th_dsh_old>.
721 assign <lr_th_dsh_old>->* to <lt_dsh_old>.
>>>> create data lr_s_data like line of <lt_dsh_old>.
723 assign lr_s_data->* to <ls_dsh_old>.
724 assign component ucf6_cs_coi_fld-pcnt1
725 of structure <ls_dsh_old> to <pcnt1_7a>.
726
727 * change of direct shares in divestiture
Please provide your suggestions.
Edited by: VM2727 on Feb 10, 2012 3:27 AM
Or even these ones:
SAP Note 1480856 - C/I: Program termination GETWA_NOT_ASSIGNED
Symptom
When you execute the consolidation of investments, a program termination
occurs (short dump GETWA_NOT_ASSIGNED in the method CREATE_OCI_LIST of the
class CL_UC_COI_ACT).
Note 1467924 - Termination GETWA_NOT_ASSIGNED in CL_UC_COI_ACT_PD
Symptom
When you execute the consolidation of investments, the program termination GETWA_NOT_ASSIGNED occurs in the method CALC_NET_INCOME_MEM of the class CL_UC_COI_ACT_PD.
Similar Messages
-
T-code MDBT runtime error GETWA_NOT_ASSIGNED
Hell everyone.
I copied a client from another client,then I runned MRP in the new client by T-code MDBT.
It happened an error.
Can anybody tell me how I can reslove this issue?
Thanks & Best regards!
The detail error as below:
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 2010.06.19 11:01:46
Kurztext
Field symbol has not yet been assigned.
发生了什么?
Error in ABAP application program.
The current ABAP program "FCR05205" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
你能做什么?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
错误分析
You attempted to access an unassigned field symbol
(data segment 11).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.
如何更正此错误
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system your
use the following search criteria:
"GETWA_NOT_ASSIGNED" C
"FCR05205" or "FCR05F00"
"PUT_P_VGWXX"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Edited by: lzjsdxg on Jun 19, 2010 6:35 AMAre there anybody can help me?
Thanks! -
Runtime Error displayed when attempting to access Forums
I've IE 9 installed on a Windows Home Premium box. When I attempt to access the Technet Forums the following is displayed
Server Error in '/Forums' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
I'm running IE 9 on another PC (Windows 7 Pro) and it is able to acess the Technet Forums with no problem (I'm using it to make this entry).
I've compared the settings on both browsers and they are identical. Why does IE on my Home Premium PC misbehave?
Thanks in advance.Hi,
What’s the result of other webpages?
Can you access the thread link successfully?
http://social.technet.microsoft.com/Forums/en-US/0c79aae9-3883-450a-bcd2-ba14ac5c8cd9/runtime-error-displayed-when-attempting-to-access-forums?forum=i
You can test in compatible view for a try first.
http://windows.microsoft.com/en-IN/internet-explorer/use-compatibility-view#ie=ie-9
Alex Zhao
TechNet Community Support -
I am getting runtime error R6034 when trying to open iTunes I have followed all instructions for reinstalling iTunes but it still occurs can any help please?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99537) -
I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start. I verified that I have admin privileges. Can anyone help?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Error Message when running BI Publisher
Hi-
Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
Any idea regarding the error message
Regards,
MACDDid your custom report ever ran successfully in the environment you are getting the error.
Most of the time not all the report definition and associated definitions are migrated to the next environment.
Have a look at following doc:
E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1) -
A critical program error occured when running a workbook
Some end users get a critical program error occured when running a workbook when they want to make selections.
In the trace they get the following message
System.ArgumentException: Item has already been added. Key in dictionary: "44ABATDK7TYM365CYLQ0VDKU6" Key being added: "44ABATDK7TYM365CYLQ0VDKU6"
This happens only on some PC clients !
Thanks for any help !
IvanHi Vid,
Thanks for your suggestion.
I am using a different patch i.e.
BI AddOn 7.X (based on 7.10), Support Package 5, Revision 1083
and it helps to solve my problem.
Cheers. -
Error message when running the FSPCCURR - PS/Fin MultiCurrency Process
error message when running the FSPCCURR - PS/Fin MultiCurrency Process
=====================================================
2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.Hi 841037,
We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks. -
Error message when running form
hi everybody,
im getting this error message when running a simple form.
Positional Parameter after key command line.
Can anyone please help.
thnk uCheck the path to your form. Forms does not like spaces in the path or fmx filename, but the error doesn't explain the problem at all!
-
Runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's
Hello colleagues,
I always get the runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's
For instance, lets take Function Modules:
I tried almost any of them but in particular:
GRPC_API_CONTROL_QUERY Load the list of controls
GRPC_API_ISSUE_QUERY Retrieve issues of the case
GRPC_API_ORGUNIT_QUERY Load list of Organizations
GRPC_API_RMPLAN_QUERY Retrieve remediation plans of case
GRPC_API_RISK_CONTROLS Retrieve the controls of the risk
and etc.
All of them return the runtime error OBJECTS_OBJREF_NOT_ASSIGNED, however I've provided Object ID's in the right format,
The same is for corresponding classes,
Does anyone have such problem before?
Appreciate your responses,
Thank you,
Best Regards,
AntonHi Anton,
We need to pass value for I_SESSION_ID. Because, when i execute FM: GRPC_API_RMPLAN_QUERY by giving correct I_OBJECT_ID as shown below, i'm also getting the same error.
On executing..
Getting following dump.
And attached is the dump analysis .
Thanks
KH -
Runtime error ddic_typeleng_inconsistent when i execute st03n?
Hi Experts,
I am getting runtime error DDIC_TYPELENG_INCOINSISTENT when i execute ST03N.
My server ECC6.0 ---Windows---Oracle 11.2.0.3.0
Kernel 7.21, Patch 201
Below i attached screenshot also.
Please Suggest.
Thanks & Regards
PravinHi pravin,
After 720 kernel upgrade you will get this DUMP.
The 7.20 kernel checks complex DDIC structures in more detail than the previous kernels. Short
dumps of the type DDIC_TYPELENG_INCONSISTENT may occur, for example, when calling transaction SM66.
For more detailed information about correcting these inconsistencies, see Note 1610716.
The actions described in this note can be performed anytime, but we recommend to implement it
before the kernel switch. -
I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?
Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html -
Receiving Error Message when running sh rep_populate.sh
Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
THIS PROGRAM IS DEPRECATED!
You should be generating xml metadata instead.
Please see http://linux.duke.edu/metadata
After executing following instructions and replacing server name with our server name.smmj.com
Client Setup
1. Import the GPG key
rpm --import /usr/share/rhn/RPM-GPG-KEY
2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
up2date default
to
#up2date default
and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
Enterprise Linux 5
(commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
(commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
#yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
#yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
#yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
#yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
#yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
#yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
#yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
#yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
#yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
and running additional instructions
2. Run up2date to install python-urlgrabber.
up2date -i python-urlgrabber
Receiving following error
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
is called public-yum-el5.repo
Made following changes in that file
Enterprise Linux 5
[el5_latest]
name=Enterprise Linux $releasever - $basearch - latest
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
gpgcheck=1
enabled=1
[el5_addons]
name=Enterprise Linux $releasever - $basearch - addons
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
gpgcheck=1
enabled=0
[el5_oracle]
name=Enterprise Linux $releasever - $basearch - oracle
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
gpgcheck=1
enabled=0
[el5_ga_base]
name=Enterprise Linux $releasever GA - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
gpgcheck=1
enabled=0
[el5_u1_base]
name=Enterprise Linux $releasever U1 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
gpgcheck=1
enabled=0
[el5_u2_base]
name=Enterprise Linux $releasever U2 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
gpgcheck=1
enabled=0
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
gpgcheck=1
enabled=0
[el5_ga_patch]
name=Enterprise Linux $releasever GA - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u1_patch]
name=Enterprise Linux $releasever U1 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u2_patch]
name=Enterprise Linux $releasever U2 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u3_patch]
name=Enterprise Linux $releasever U3 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
gpgcheck=1
enabled=0
Then ran following commands
up2date -u
Output
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
yum update
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
Thanks, for your helpWe purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
When we go to System, Administration, Server Settings, Services, Samba is also not there.
Nowhere can we find an easy way of installing samba on this Linux OS.
I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it. -
Error message when running Transaction Code = ME84
hi,
i am getting an error message when running Transaction Code = ME84
Error is 'No processing (error message P5 017), No data for chosen selection'
can someone please guide me on this ?Hi Mahendra,
There are several reasons for the release not happeneing.
1. The issue could be in the selection of release type
2. Scope of selection
3. Strategy profile
Please check whether the selection parameters are considered are right for release to happen.
Regards,
Harish -
How to correct Runtime error R6034 when attempting to update iTunes on PC?
How to correct Runtime error R6034 when attempting to update iTunes on PC?
Hey ievafromsa,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.
Maybe you are looking for
-
How to hook up the Qosmio G20 to a TV?
Hi, I posted here a long time ago and I still haven't found a solution to this problem. I want to hook my laptop up to my TV. I'm always in a different room so I'll be either hooking it up to a 21" Toshiba, or a 32"Sony or a 51"Toshiba - I don't know
-
I just bought an Ipad 2 and have been trying to set up my yahoo email. I continually get the msg, Yahoo! Server Unavailable Please try again later. I am not real savvy with this stuff so I need an answer I can understand, please... Thanks for any hel
-
I use a button on one tab to change the content of textboxes with one on another different tab. int CVICALLBACK cbfGetIP (int panel, int control, int event, void *callbackData, int eventData1, int eventData2) switch (event) case EVENT_LEF
-
Sorry in advance if this has already been covered... Is there a way to find out when episodes of TV shows are going to be made available in itunes? For example, Survivor that was on tonight...when will it be available to watch on apple TV/itunes? I c
-
My canon powershot SX2210 IS is not recognized. It was before I installed OSX!!
my canon powershot SX2210 IS is not recognized. It was before I installed OSX!!