Runtime Error in BOM -System attempted use dynpro 1000 program "SAPLXCSA"

Hi Guru's,
While Creating BOM in IS-Retail server using CS01 Tcode,
I am getting a ABAP Runtime Error :
"The system attempted to use dynpro 1000 in program "SAPLXCSA".This dynpro does not exist".
To correct this error Whether any configuration is required in SPRO for BOM ???
Please suggest how to solve the issue ???
Any Input is Highly Appreciated.
Thanks and Regards,
Selva

OSS NOTES

Similar Messages

  • Runtime Error "Cannot find system in table file"

    I need assistance!
    I have a Blackberry Curve 8310 and have recently installed Version 4.5
    I am trying to setup my synchronization.  I have followed the steps to setup my calendar to Outlook 2007.  It tells me Congratulations! You have successfully configured the product. However, when I press Finish, I get a Runtime Error "Cannot find system in table file"
    I have uninstalled the program and reinstalled it - the same error appears. 
    Any help would be appreciated!
    Solved!
    Go to Solution.

    FIGURED IT OUT!!!  
    The following steps, which are posted on the RIM Support will work; however, I had to do it a different way.  In Step 1, it states that the ilxolkCompanion.fil is located in C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector path...however, when I searched for this file, it was actually located in C:\Program Files\Blackberry\Connectors\MS Outlook Connector.  (This could be because I upgraded from 4.2.2 to 4.5 w/o completing a clean uninstall...not too sure why)
    Once I located the file through the command prompt, I unregistered as per the instructions in Step 1.  I then followed step 2 exactly word for word...and VOILA!!!  I now have Version 4.5 working with MS Outlook 2007
     ResolutionIf the Connectors folder is still present in C\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector, follow these steps:
    Unregister the old Microsoft Outlook connector ilxolkCompanion.fil.
    Open the command prompt.
    Navigate to C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector.
    Type in the command regsvr32 -u ilxolkCompanion.fil.
    In Desktop Manager, Microsoft Outlook will no longer be listed as an available desktop application.
    Register the most current Microsoft Outlook connector.
    Navigate to C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector.
    Type in the command regsvr32 msoutlookconnector.fil.
    In Desktop Manager, Microsoft Outlook will now be registered as an available desktop application.
    Once these steps have been completed, configure synchronization again.

  • BB Bold 9650 - DM Runtime Error "Cannot Find System in Table File"

    I am new to these forums and have read as much as I understand without seeing a fix. I recently traded in my BB World Edition (loved it) for the Bold 9650. I uninstalled the old DM I was using and installed DM 6.0 - couldn't sync. Unistalled that and installed v5 - couldn't sync. Did a clean uninstall of all of it, restarted my computer and phone, reinstalled v5 - then got the runtime error.
    I am more than frustrated and about ready to call Verizon to return the phone and go back to the World Edition. I have to sync my calendar and contacts for my job - can this be done wirelessly??? I don't have to have DM if I can sync somehow..... HELP!!!!!!!
    Windows 7 Ultimate 32-bit
    Office 2010 Professional Plus

    HELLO BLACKBERRY?????? I have been searching for over a week for a solution to this problem with no luck. I see you quickly respond to other posts with easy questions..... WHY CAN'T I SYNC??????????????????????????

  • Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

    Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

    Sorry I can't get the screen print to upload
    It says
    Mandatory Update Available
    A Mandatory version of this application is available for download. Application can't continue without installing this version.
    Application:     Acrobat_com
    Installed version: 2.0.0.0
    Update Version : 2.3.0.0
    Download now                    Quit
    Release notes ( this is blank)
    After selecting 'Download Now' I get the following message;
         Download failed
         There was an error downloading the update. Error #16820
         Close

  • Cannot reinstall CS4 to my new hard drive.  Message of Errors and installation failure. Using original CS4 program disks and also tried to reload from adobe on internet

    Tried to re-install photoshop CS4 to my new hard drive.  Message of "Done with errors" and installation failed.  Used original disks and tried to load from adobe site on internet.  Will not load.

    Your HD wouldn't be formatted as case-sensitive, would it?
    Beyond that, details are needed:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Catchable Runtime Errors list (CATCH SYSTEM-EXCEPTIONS)?

    Hi All,
    I was just going through CATCH SYSTEM-EXCEPTIONS syntax. Could anyone give all the possible SAP existing Exceptions or kindly let me know how I can find in the system (4.6C) ?
    Thankss,
    Neeth

    Hi Vijay,
    Having read this post of yours, I couldn't help appreciating your modesty. And we hope to see much more active participation from your in this forum.
    By the way, you now have 50 points with just 22 posts. Now, can you keep up this ratio? Just try it. And you will know better
    Trying to pull your leg, anand mandalika.
    ========================================================
    And Nameeth,
    I really appreciate your coming back and rewarding the responses promptly. Please keep that up.
    Regards,
    Anand Mandalika.

  • The system attempted to use dynpro 0000 in program "SAPLSZA1". This dynpro

    when I am trying XK02 I am getting following error.
    The system attempted to use dynpro 0000 in program "SAPLSZA1".
    This dynpro does not exist.
    it is only for a particular Vendor. for other vendor it is working fine.

    Hi  Rupesh Jadhav,
    why do you think, this is an Linux issue?
    Hannes

  • The system attempted to use dynpro 0020 in program "SAPMSYST" .

    Hi Everyone
    How to correct this error?
    The system attempted to use dynpro 0020 in program "SAPMSYST" .
    Iam using SAP NetWeaver 7.0 Trial version.
    Thanks
    Sudha

    Hi Sudhakar,
    Please post the ST22 info of this Dump (if it occurred).
    Note: if you are not providing the information correct, you will get vague responses.
    Regards,
    Srihari

  • Runtime error in MIRO while using User/Screen exit

    Hello,
    I have implemented an exit in ABAP for MIRO which when transported to Quality server through runtime error.
    I have used EXIT (SMOD) : LFDCB001 which contains FM -> EXIT_SAPLFDCB_001 and include -> ZXM08U31. In this exit I have written my code to disable Inv. Party field. This field exist in Details Tab in Miro Transaction.
    Location of the field: MIRO -> Details (tab) -> Inv. Party (Field)
    Code written in include ZXM08U31 is:
    LOOP AT SCREEN.
      IF screen-name = 'INVFO-LIFRE'.
        screen-input = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    This exit is assigned to a project in CMOD and I tested the same in Development system. It is working perfectly.
    Now I transported the TR (Includes program ZXM08U31 and Customer enhancement projects ZMIRO). Now when I run MIRO in quality server it triggers the my logic and then through runtime error.
    Runtime error says:
    Short text
        Dynpro does not exist
    Error analysis
        The system attempted to use dynpro 0400 in program "SAPLXM08".
        This dynpro does not exist.
    I agree that screen 400 does not exists in program for MIRO but it does not exists in development system as well. So if the runtime error is valid in QEC server then why not in DEV server. And when it can run successfully in DEV server why cant it run in QEC server.
    Hope I have explained all the things in detail.
    Please provide me the solution since user can bombard anytime for the MIRO dump everytime in QEC.
    Regards,
    Harjeet Grover

    Hi Harjeet,
    Reason of your Dump is that the enhancement "LFDCB001" which you used contains one Function module exit "EXIT_SAPLFDCB_001" and another one screen exit in calling screen  "SAPLFDCB" number 0150.
    So when you activate your project these above mentioned both components were activated.
    So when you execute transaction SAP looks for called screen "SAPLXM08" No-0400 but as you havn't created and program go for DUMP.
    Solution - Just Create called screen  "SAPLXM08" No-0400 and activate.
    Thanks,
    Vijay

  • Runtime error in Web Dynpro Application

    Hi Experts,
    I am getting a runtime error from a custom Web dynpro Application. The error details are
    Category               ABAP Programming Error
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
    Except.                CX_SY_REF_IS_INITIAL
    Web Dynpro Component   Z*
    ABAP Program           /1BCWDY/0O2TGWNVA3D2IUW3YFXJ==CP
    Application Component  Not Assigned
    Could someone please help on resolving this error.
    -Regards,
    Ragavan

    Hi,
    Add additional info including the ST22 dump for security you can run find and replace in the st22 dump text and relplace ahost name and sid.
    Also when do you get this dump exactly i.e. what are you doing or how are you accessing the webdynpro for the error to be generated.
    What is your system patch and kernel levels.
    Please provide more information otherwise this is just a guessing game.
    Johan

  • Getting Runtime error when using HP Simple Pass

    Getting Runtime Error and Firefox shutdown when using HP Simple Pass on new HP dm 1165

    Try HP support. <br />
    http://h30434.www3.hp.com/t5/Operating-systems-and-software/HP-Simple-Pass-Not-working-in-Firefox/m-p/348876

  • Runtime error in transaction ME31L

    Hi Experts,
    I am facing the problem with tranasaction code ME31L ,its showing the runtime error..
    here i am writting the  whole error discription which occurs at runtime.
      Short text
        Dynpro does not exist
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLXM06" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        The system attempted to use dynpro 0201 in program "SAPLXM06".
        This dynpro does not exist.
    Trigger Location of Runtime Error
        Program                                 SAPLXM06
        Include                                 MM06EO0C_CUSTSCR1_HEAD_SET_DAT
        Row                                     10
        Module type                             (FUNCTION)
        Module Name                             EXIT_SAPLEINM_013
    Source Code Extract
    Line  SourceCde
         1 ----
         2 *       MODULE CUSTSCR1_HEAD_SET_DATA OUTPUT                          *
         3 ----
         4 *       ........                                                      *
         5 ----
         6 MODULE CUSTSCR1_HEAD_SET_DATA OUTPUT.
         7
         8   PERFORM CUSTSCR1_HEAD_SET_DATA_PBO using fc_call.
         9
    >>>>> ENDMODULE.

    Hi,
    This means that the exit is not implemented yet. Infact what you are seeing is a warning message(ZX...).
    Is your system recently upgraded? Wrong OSS note implementation is also a possibility.
    Just debug and see at what point you are getting the error. Also did you check the program whether it has the required screen or not? If not available then you can raise an OSS note to SAP if you are not able to find any.
    Thanks,
    Vinod.

  • Runtime error Dynpro_not_found

    Hi experts,
    I get the following runtime error when trying to open a Z table under SM30.
    Short text                        
         Dynpro does not exist         
    Error analysis                                                            
        The system attempted to use dynpro 0100 in program "SAPLZGET_ORG".    
        This dynpro does not exist.                                                                               
    User and Transaction                                                                               
    Client.............. 100                                                                     
        User................ "ARUN"                                                                  
        Language key........ "E"                                                                     
        Transaction......... "SM30 "                                                                 
        Transactions ID..... "4976D21BC7F841F0E1000000C0A80046"                                                                               
    Program............. "SAPLZGET_ORG"                                                          
        Screen.............. " "                                                                     
        Screen line......... 0                                                                       
    Line  SourceCde                                                                               
    97             i_messnbr = '288'.                                                              
       98           ELSE.                        "customer system                                     
       99             i_messnbr = '289'.                                                              
      100           ENDIF.                                                                               
    101         ENDIF.                                                                               
    102         MESSAGE ID 'AM' TYPE 'I' NUMBER i_messnbr                                           
      103                         WITH vim_addr_basetable                                             
      104                              vim_addr_bastab_field                                          
      105                              vim_tsadrv-tablename                                           
      106                              vim_tsadrv-fieldname.                                          
      107         CLEAR x_header-adrnbrflag. MODIFY x_header INDEX 1.                                 
      108       ELSE.                            "entry in TSADRV is complete                         
      109         vim_addr_group = vim_tsadrv-addr_group.                                             
      110         IF x_header-adrnbrflag EQ 'O'.                                                      
      111           CALL FUNCTION 'ADDR_GET_STATUS_INFO'                                              
      112             TABLES                                                                          
      113               status_table = i_statetab.                                                    
      114           READ TABLE i_statetab WITH KEY                                                    
      115                constant = vim_tsadrv-addr_group.                                            
      116           IF sy-subrc NE 0. CLEAR i_statetab-value. ENDIF.                                  
      117           TRANSLATE i_statetab-value USING ' OXN'.                                          
      118           x_header-adrnbrflag = i_statetab-value.                                           
      119           MODIFY x_header INDEX 1.                                                          
      120         ENDIF.                                                                               
    121       ENDIF.                                                                               
    122     ENDIF.                                                                               
    123   ENDIF.                                                                               
    124   PERFORM vim_process_assigns.                                                              
    125   IF <status>-initializd EQ space.     "not processed yet               
    126 * reset dropdown lists                                                  
    >>>     CALL FUNCTION 'VRM_REFRESH_VALUES'.                                 
    128     IF x_header-frm_af_ini NE space.   "user exit exists AND            
    129 * set environment for user exit.                                        
    130       ASSIGN dba_sellist-sys TO <vim_sellist>.                        
    131       vim_enqueue_range = x_header-subsetflag. assigned = 'X'.          
    132 * perform user exit -> 3.0B processed in JUSTIFY_ACTION_MODE            
    133       PERFORM (x_header-frm_af_ini) IN PROGRAM (sy-repid).              
    134     ENDIF.                                                              
    135 * backup DBA_SELLIST                                                    
    136 *    REFRESH vim_dba_sel_kept.                        "UF210200b        
    137 *    APPEND LINES OF dba_sellist TO vim_dba_sel_kept.                   
    138 * remove multiple values for subsets                                    
    139     DELETE dba_sellist WHERE ddic = 'M'.                                
    140     DESCRIBE TABLE dba_sellist.                                         
    141     IF sy-tfill GT 0.                                                   
    142       READ TABLE dba_sellist INDEX sy-tfill.                            
    143       CLEAR dba_sellist-and_or.                                         
    144       MODIFY dba_sellist INDEX sy-tabix.                                
    145     ENDIF.                                                  "UF210200e  
    146   ENDIF.                                                                               
    Please kindly help me out with the issue.
    Thank You.

    Hi,
    What is the screen number given when you created the maitenence generator? Over here it seems it is trying to open the table in sm30 using screen 0100.
    Try to recreate the table maintenence generator. Delete the existing maintenence generator and when screen number is there select propose screen number so the system suggests the screen number.
    Then try to maintain entries via sm30.
    Hope this helps.
    Regards,
    Sachin

  • Runtime error SQL error 3114 occurred when accessing program CX_ w

    Hi Friends,
    Iam in a big mess . I have one query based on one my Zinfocube.This query ia attached in the workbook .. Previuolsy all was fine , but now whever iam executing this query it is throwing me the exception
    Query 0: Runtime error SQL error 3114 occurred when accessing program CX_ with parallel processing via RFC.
    and
    Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
    I am not able to get the cause of error ..
    Can anybody help me in this regrd as its a bit urgent.
    Thanks in advance..

    Hi , thanks for replying ,
    I have tried running query through RSRT also , its not working still it is giving me the same error .
    In st22 it is showing me the follwing dump.
    DBIF_REPO_SQL_ERROR
    Short text
        SQL error 3114 occurred when accessing program
    What happened?
        The system is no longer linked to an ORACLE instance.
        No further operations can be performed on the database.
    What can you do?
        You cannot eliminate this error yourself.
        Please inform your database administrator.
        Note which actions and input led to the error.
        For further help in handling the problem, contact your SAP administrator
        You can use the ABAP dump analysis transaction ST22 to view and manage
        termination messages, in particular for long term reference.
        Note which actions and input led to the error.
        For further help in handling the problem, contact your SAP administrator
        You can use the ABAP dump analysis transaction ST22 to view and manage
        termination messages, in particular for long term reference.
    Error analysis
        The system attempted to access an ORACLE instance to which
        it is no longer linked.
        This situation may arise because the ORACLE instance
        has been stopped due to an error or an external operation.
    How to correct the error
        Database error text........: "ORA-03114: not connected to ORACLE"
        Triggering SQL statement...: "CX_SQL_EXCEPTION==============CP "
        The current status of the ORACLE instance cannot be determined.
        It may be still inactive or the database administrator may have
        restarted it.
        In any case, all systems that have accessed the ORACLE instance
        must be restarted after the ORACLE instance has been restarted.
        If you were working on a central system, inform
        your system administrator.
        If you were working on an external local system, inform
        the person responsible for this system.
        If you were working on your own local system, restart
        the system yourself.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "DBIF_REPO_SQL_ERROR" " "
        "CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
        "NEXT_PACKAGE"
        If you cannot solve the problem yourself and want to send an errornotification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_REPO_SQL_ERROR" " "
    "CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
    "NEXT_PACKAGE"
    Thanks in Advance..

  • Runtime Error - DBIF_RSQL_INVALID_RSQL - Too many OPEN CURSOR

    When I try to train a Decision Tree Model via an APD process in RSANWB, I get a runtime error when my model is configured with too many parameter fields or too many leaves (with 2 leaves it works, with more it fails).
    By searching SAP Notes I see that there are many references to this kind of runtime errors. But no note on occurences of it in RSANWB / RSDMWB .
    Any information on this anyone?
    Claudio Ciardelli
    Runtime Errors         DBIF_RSQL_INVALID_RSQL
    Date and Time          29.07.2005 16:19:21
    |ShrtText                                                                                |
    |    Error in RSQL module of database interface.                                                   |
    |What happened?                                                                                |
    |    Error in ABAP application program.                                                            |
    |                                                                                |
    |    The current ABAP program "SAPLRS_DME_DECISION_TREE_PRED" had to be terminated                 |
    |     because one of the                                                                           |
    |    statements could not be executed.                                                             |
    |                                                                                |
    |    This is probably due to an error in the ABAP program.                                         |
    |                                                                                |
    |Error analysis                                                                                |
    |    The system attempted to open a cursor for a SELECT or OPEN CURSOR                             |
    |    statement but all 16 cursors were already in use.                                             |
    |    The statement that failed accesses table "/BIC/0CDT000030 ".                                  |
    |    The erroneous statement accesses table "/BIC/0CDT000030 ".                                    |
    |Trigger Location of Runtime Error                                                                 |
    |    Program                                 SAPLRS_DME_DECISION_TREE_PRED                         |
    |    Include                                 LRS_DME_DECISION_TREE_PREDU06                         |
    |    Row                                     103                                                   |
    |    Module type                             (FUNCTION)                                            |
    |    Module Name                             RS_DME_DTP_EVALUATE                                   |
    |Source Code Extract                                                                               |
    |Line |SourceCde                                                                                |
    |   73|* Prepare for Data evaluation                                                               |
    |   74|  CATCH SYSTEM-EXCEPTIONS OTHERS = 15.                                                      |
    |   75|    CREATE DATA ref TYPE (i_enum_dbtab).                                                    |
    |   76|    ASSIGN ref->* TO <fs_wkarea>.                                                           |
    |   77|    ASSIGN COMPONENT gv_class_dbposit OF STRUCTURE                                          |
    |   78|                      <fs_wkarea> TO <fs_class>.                                            |
    |   79|    CREATE DATA ref TYPE TABLE OF (i_enum_dbtab).                                           |
    |   80|    ASSIGN ref->* TO <ft_data>.                                                             |
    |   81|                                                                                |
    |   82|  ENDCATCH.                                                                                |
    |   83|  IF sy-subrc = 15.                                                                         |
    |   84|*   Error on Assignment.                                                                    |
    |   85|    CALL FUNCTION 'RS_DME_COM_ADDMSG_NOLOG'                                                 |
    |   86|      EXPORTING                                                                             |
    |   87|        i_type    = 'E'                                                                     |
    |   88|        i_msgno   = 301                                                                     |
    |   89|        i_msgv1   = 'EVALUATION_PHASE'                                                      |
    |   90|      IMPORTING                                                                             |
    |   91|        es_return = ls_return.                                                              |
    |   92|    APPEND ls_return TO e_t_return.                                                         |
    |   93|    EXIT.                                                                                |
    |   94|  ENDIF.                                                                                |
    |   95|                                                                                |
    |   96|* For the un-trained Rec-Ids, evaluate.....                                                 |
    |   97|  REFRESH lt_recinp.                                                                        |
    |   98|  APPEND LINES OF i_t_records TO lt_recinp.                                                 |
    |   99|  SORT lt_recinp .                                                                          |
    |  100|* Open Cursor..                                                                             |
    |  101|  DATA: l_curs TYPE cursor.                                                                 |
    |  102|  DATA: l_psize TYPE i VALUE 10000.                                                         |
    |>>>>>|  OPEN CURSOR WITH HOLD l_curs FOR                                                          |
    |  104|   SELECT * FROM (i_enum_dbtab)                                                             |
    |  105|     WHERE rsdmdt_recid NOT IN                                                              |
    |  106|        ( SELECT rsdmdt_recid FROM                                                          |
    |  107|             (i_learn_tab) ).                                                               |
    |  108|                                                                                |
    |  109|*  Start Fetch...                                                                           |
    |  110|  DO.                                                                                |
    |  111|    FETCH NEXT CURSOR l_curs                                                                |
    |  112|      INTO CORRESPONDING FIELDS OF TABLE <ft_data>                                          |
    |  113|      PACKAGE SIZE l_psize.                                                                 |
    |  114|    IF sy-subrc NE space.                                                                   |
    |  115|      EXIT.                                                                                |
    |  116|    ENDIF.                                                                                |
    |  117|                                                                                |
    |  118|*     Process records...                                                                    |
    |  119|    LOOP AT <ft_data> ASSIGNING <fs_wkarea>.                                                |
    |  120|                                                                                |
    |  121|*     Call Prediction Function.                                                             |
    |  122|      CALL FUNCTION 'RS_DME_DTP_PREDICT_STRUCTURE'                                          |

    Hi Claudio,
    well the message is very clear and I think in your case you need to split your model into a few somehow equal models, each not having more than 2 leaves.
    Another option might be to do more things serially instead of parallel.
    Hope it helps
    regards
    Siggi

Maybe you are looking for