Runtime Error in CA01 - Syntx error or generation error in a screen 1200.
Hi,
I am unable to identify the exact reson for this runtime error, please guid what i need to do to overcome this error.
Transaction CA01.
I am getting below Syntax Error in Screen 1200 of Prog SAPLCPDA
Element CHANGE_RULE touches or overlaps other element
Message no. 37315
Please find below Error Log.
Short text
Syntx error or generation error in a screen.
What happened?
At the screen generation it was detected that a screen to be generated
has a syntax error or could not be generated due to another error.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
Screen "SAPLCPDA" 1200 could not be generated.
How to correct the error
Rerport the error to SAP if it is a SAP screen.
Hi,
What are the possible reasons for getting this error.
Runtime Error in CA01 - Syntx error or generation error in a screen 1200.
Thanks in advance
Similar Messages
-
Hi All,
I am loading data for Sales Item for this i have enhanced the DataSource. Now while i am loading the data to DSO it is giving error while activating the DSO--SID generation error as it found some hex. values.
To overcome this i tried with TOUPPER formula for that field but still it is giving error. So i have removed unchecked the check box 'SID generation upon activation' as i am not going to use this DSO for reporting.
But i am transferring data to InfoCube where again it is giving the same error.
Kindly help me out to overcome this error.Hi
Always Load Master Data before Transaction data to get rid of SID Generation Error.
And Hex Values FM -- CHAR_HEX_CONVERSION.
http://help.sap.com/saphelp_nw70/helpdata/EN/48/b4e431c0ca11d2a97100a0c9449261/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/25/73725c700511d3aa40006094b92fad/frameset.htm
Re: How-to convert a character to its hex value?
Hope it helps -
CRM Middleware Generation Errors
Hello Experts,
There are few errors within transaction SMWP:
1. One error on ATTACHMNT_WR object with description "Generation error REPL_TEMPLATE_DEPENDENCY"
2. There are few other errors with message "Generation error REPL_TEMPLATE_SUBCHECK"
3. There are few other errors with message "DDic error for dependent replication objects of publication Complaints and Returns (by Partner Function and Pa"
4. One error with message "RO MSV_CMP_WRITE: Could not determine generated name of LOOKUP TABLE MCMRRL"
Could you please let me know how to proceed to fix these errors?
Thank you,
BenoîHi Benoit,
Note 951826should help here. The first step must be to run
the report in this note. If you still gets the issue with
REPL_TEMPLATE_DEPENDENCY, then please confirm that we can run the
report on the system. You will also need to tell what name you
saved the report as.
Afterwards, generate
in the following order of generators for repl. object ATTACHMENT_WRITE
a) REP_GET_RECEIPIENT
b) REALIGN_CALC_RESP
c) DEPENDENCY_REALIGN
Then generate all the ATTACHMENT_WR repl.obect.
This will usually eliminate some of the other generation errors also.
Best regards,
Brian -
SAP System Message: Syntx error or generation error in a screen
dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
alberthello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert -
Activation failed due to sructure generation error.-URGENT
i tried to check in an activity but activation failed due to the foloowing error:PLEASE HELP VERY URGENT
Development Component Build (2008-03-14 10:09:20)
Component name: tablist
Component vendor: worldbank.org
SC compartment: worldbank.org_GDB_OPERATIONS_1
Configuration: WAS_MIGATEST_D
Location: WAS_MIGATEST_D
Source code location: http://sapjdi01:50000/dtr/ws/MIGATEST/worldbank.org_GDB_OPERATIONS/dev/active/DCs/worldbank.org/tablist/_comp/
DC root folder: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/
DC type: Web Dynpro
Host: sapjdi01
DC Model check:
[dcmake] All used DCs are available locally
[dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/cmi"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/ddicruntime"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/wd/webdynpro"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/logging"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/wdp/metamodel/content"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.util.misc"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.exception"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.mw.jco"
[dcmake] validating dependency to public part "pp_connserv" of DC "worldbank.org/connserv"
[dcmake] DC model check OK
Start build plugin:
[dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
[dcmake] starting build plugin from : /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/
Build Plugin 'WebDynproPlugin', Version 6.40 SP 19 (630_VAL_REL, built on 2006-10-27 02:01:51 CEST)
development component: tablist (worldbank.org)
software component: GDB_OPERATIONS (worldbank.org)
location: WAS_MIGATEST_D
type: Web Dynpro
build variant: default
source location: http://sapjdi01:50000/dtr/ws/MIGATEST/worldbank.org_GDB_OPERATIONS/dev/active/
plugin start time: 2008-03-14 10:09:21 GMT+00:00
Java VM: Classic VM, 1.4.2 (IBM Corporation)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Source folder META-INF exists but is empty.
Source folder src/configuration exists but is empty.
Plugin initialized in 1.026 seconds
Warning: Runtime dependency to connserv (worldbank.org) not allowed (incompatible runtime type).
Preparing data context..
No 'default' JDK defined, will use running VM.
Data context prepared in 0.128 seconds
Executing macro file..
Using macro file: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/macros/build.vm
Creating output file: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/gen/default/logs/build.xml
Macro file executed in 3 seconds
Starting Ant..
Using build file: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/gen/default/logs/build.xml
Using build target: build
Generation folder: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/t/013EC0ABDECC3015F13C417F5CBF217B
Using Ant version: 1.5.4
prepare:
[mkdir] Created dir: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/gen/default/deploy
compile:
[ddgen]
[ddgen] [Info] Property deployment is true: Deployment information is provided!
[ddgen] [Info] Property sourcepath: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/src/packages
[ddgen] [Info] Property targetpath: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/t/013EC0ABDECC3015F13C417F5CBF217B/gdd
[ddgen] [Info] Property archivename: worldbank.org~tablist
[ddgen] [Info] Property vendor: worldbank.org
[ddgen] [Info] Property dcname: tablist
[ddgen] [Info] Property language: Available languages are automatically determined!
[ddgen] [Info] Property addpaths ...
[ddgen] [Info] SapMetamodelWebdynproContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
[ddgen] [Info] SapMetamodelDictionaryContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
[ddgen] [Info] worldbank.orgconnservpp_connserv.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/connserv/_comp/gen/default/public/pp_connserv/lib/java
[ddgen] [Info] exception.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.exception/_comp/gen/default/public/default/lib/java
[ddgen] [Info] SapDictionaryTypeServices.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
[ddgen] [Info] SapDictionaryTypesRuntime.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
[ddgen] [Info] jrfc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
[ddgen] [Info] SapMetamodelWebdynproContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
[ddgen] [Info] aii_proxy_rt.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.aii.proxy.framework/_comp/gen/default/public/default/lib/java
[ddgen] [Info] cmiapi.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproadmin.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynprobasesrvc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproclientserver.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynpromodelimpl.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynpromodel_dynamicrfc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynpropdfobject.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproprogmodel.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproruntime_designtime_coupling.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproruntime_designtime_coupling_api.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproruntime_repository.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproruntime_repository_pmr.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproservices.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] SapMetamodelDictionaryContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
[ddgen] [Info] aii_util_misc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.aii.util.misc/_comp/gen/default/public/default/lib/java
[ddgen] [Info] logging.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
[ddgen] [Info] logging.perf.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
[ddgen] [Info] Initialize generation templates from configuration jar:file:/usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/java/SapDictionaryGenerationCore.jar!/DictionaryGenerationConfigurationCompiled.xml
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Origin.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/PackagePointer.java
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Inves_Id.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Ccy_Code.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Subm_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Uw_Upi.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Guar_Holder.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Conver_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Doc_Num.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Sic_Cde.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Rcvr_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Sndr.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Rcvr.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Modified_By.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Symsgid.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Status_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapi_Msg.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Inves_Ty.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Reason_Dt.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Stl_Upi.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Balmnr.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Id.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapi_Line.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Frcast_Chk.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Migeo_Upi.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Waiv_Flag.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Item_Num.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Symsgno.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Status_Categ.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Mngmt_Gr.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Reg_Num.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Stat_Chng_Dt.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Migaorg_Code.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Rcvr_Grp.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Commnt_Eventtype.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapi_Param.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Doc_Typ.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Stl_Comment.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Src_Upi.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Eventtype.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapi_Mtype.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Sndr_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapi_Fld.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Commnt_Doctype.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Cmmt_User.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Symsgv.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Sme_Share.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Description.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Balognr.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapilogsys.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Amount.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Status.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Reason_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Comment_Id.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Time_Stamp.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Reason.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Miga_Source.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__S_Doc_Typ.gstructure
[ddgen] [Error] Structure org.wb.operations.stl.types.__Miga__Appl is not generated
[ddgen] [Error] BuiltIn Type or Simple Type expected
[ddgen] [Info] Catching throwable null
[ddgen] [Info] com.sap.dictionary.generation.ant.GenerationAntTaskError
[ddgen] at com.sap.dictionary.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:171)
[ddgen] at com.sap.dictionary.tools.generation.Generation.generatePersistentStructure(Generation.java:480)
[ddgen] at com.sap.dictionary.tools.generation.console.GenerationConsole.generate(GenerationConsole.java:168)
[ddgen] at com.sap.dictionary.generation.ant.GenerationAnt.main(GenerationAnt.java:47)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
[ddgen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
[ddgen] at java.lang.reflect.Method.invoke(Method.java:391)
[ddgen] at com.sap.dictionary.generation.ant.DDGenAntTask.execute(DDGenAntTask.java:219)
[ddgen] at org.apache.tools.ant.Task.perform(Task.java:341)
[ddgen] at org.apache.tools.ant.Target.execute(Target.java:309)
[ddgen] at org.apache.tools.ant.Target.performTasks(Target.java:336)
[ddgen] at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
[ddgen] at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
[ddgen] at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
[ddgen] at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:226)
[ddgen] at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:202)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
[ddgen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
[ddgen] at java.lang.reflect.Method.invoke(Method.java:391)
[ddgen] at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
[ddgen] at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
[ddgen] at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
[ddgen] at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
[ddgen] at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
[ddgen] at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1498)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:727)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:503)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:442)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:314)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:252)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:168)
[ddgen] ERROR: Unknown exception during generation null (com.sap.dictionary.generation.ant.GenerationAntTaskError)
[ddgen] ERROR: Generation failed due to errors (3 seconds)
Ant runtime 5.593 seconds
Ant build finished with ERRORS
[Error] Generation failed!
Error: Build stopped due to an error: [Error] Generation failed!
Build plugin finished at 2008-03-14 10:09:32 GMT+00:00
Total build plugin runtime: 10.143 seconds
Build finished with ERRORI think the "," that comes in the flat file. CHange the number fields in the file from ",". If it has 1000 separator remove them. You need not have them in the file. In your case i think the decimals are coming as ",". In that case change your user settings for decimal places and then try to load.
Hope this helps -
Code Generation Error - SUP 2.2 / SUW 2.2
Hi,
I have formatted my laptop PC and re-installed Sybase Unwired Workspace 2.2. After the installation I get Code Generation Error message:
Before Code Generarion attemp the Java Build Path / Source tab is empty and after the Code Generation the error specified above is generated and the following path is added to the Java Build Path / Source tab:
XXX/Generated Code/src (missing)
I cannot resolve the problem. Does anybody has idea about the problem?
thanks,Hi,
1. I created a new model having only one MBO and generated code successfuly.
2. The result is the same after deletion of "Generated Code" and creating new folder
3. The result is the same after generation code to another folder.
nothing has changed but I discovered additional information in the "workspace\.metadata\.log" file:
com.sybase.uep.tooling.codegeneration.coordinator.CoordinatorException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
at com.sybase.uep.tooling.codegeneration.coordinator.impl.ClientObjectAPICoordinator.sendRequest(ClientObjectAPICoordinator.java:115)
at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.sendRequest(CodeGenerationJob.java:200)
at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.processTasks(CodeGenerationJob.java:172)
at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.runInWorkspace(CodeGenerationJob.java:123)
at org.eclipse.core.internal.resources.InternalWorkspaceJob.run(InternalWorkspaceJob.java:38)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
Caused by: com.sybase.uep.tooling.codegeneration.clientobjectapi.ClientObjectAPIException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
at com.sybase.uep.tooling.codegeneration.coordinator.CoordinatorException.<init>(CoordinatorException.java:27)
... 6 more
Caused by: com.sybase.modeling.templatej.runtime.adapter.impl.NoSuchMemberException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
at com.sybase.uep.tooling.codegeneration.CodeGenerationException.<init>(CodeGenerationException.java:26)
at com.sybase.uep.tooling.codegeneration.clientobjectapi.ClientObjectAPIException.<init>(ClientObjectAPIException.java:27)
at com.sybase.uep.tooling.codegeneration.clientobjectapi.impl.ClientObjectAPIDelegator.generate(ClientObjectAPIDelegator.java:155)
at com.sybase.uep.tooling.codegeneration.coordinator.impl.ClientObjectAPICoordinator.sendRequest(ClientObjectAPICoordinator.java:86)
... 5 more -
Error during distribution for compiled code generation-Reply
Hi,
Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
If its the invalid class problem you'll find a message like:
Generating code for partition BLTCustomWindow_cl0_Part1.
ERROR: Exiting due to following exception:
SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
exception. See the remainder of the error stack for more information.
Class: qqsp_ResourceException
Error #: [1001, 3]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor", (partitionId =
9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
(0x4ecd,0x19a)
Class: qqsp_ImplementationException
Detected at: qqcg_TRclass::SetClass at 2
Last TOOL statement: method ForteCompiler.ProcessPGF
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
c4tstdrv > setrepos star8
c4tstdrv > setwork dmcompiledbuild
c4tstdrv > open
Type Service Flags Level
err sh * 255
trc rp 1 4
c4tstdrv > findproj productbmservices
c4tstdrv > cleanuprtclasses
Removing extraneous RTclass ProductShootingLocationMgrProxy
Removing extraneous RTclass PRTerritoryBaseMgrProxy
Removing extraneous RTclass PRTerritoryMgrProxy
Removing extraneous RTclass TalentBaseMgrProxy
Removing extraneous RTclass TalentTypeMgrProxy
Removing extraneous RTclass TitleTypeBaseMgrProxy
Removing extraneous RTclass TitleTypeMgrProxy
Removing extraneous RTclass ProductSecurityBaseClass
Removing extraneous RTclass ProductSecurityBaseQuery
Removing extraneous RTclass ProductSecurityQuery
Removing extraneous RTclass ProductSecurityMgrProxy
c4tstdrv > commit
c4tstdrv > exit
Integrate the changes to the workspace, start the build again and this should have cured the problem.
However, its hard to know what the cause of your problem is without seeing the output in the log files.
Good luck.
Mark Carruthers
20th Century Fox
"Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi,
If this INCLUDE is in a function group go the MAIN program and activate from there.
Can you list out the include name?
a® -
Report Painter GR214 generation error - Short dump 4.6C
While generating a report with more than twenty sections, the system short dumps with the error message GR214 pointing to "MESSAGE_TYPE_X"
"%_T01JR0 " or "########################################"
"INSERT_ROW_FORMULA_NEW"
Any leads to fix this?
The generation error happens only when I include a last line formula in the last section, Till then it is working fine.Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman -
Smartform report generation error
Hi,
I have a problem with a report calling a smartform. The report works perfectly on the 1 system but on the other system there is a generation error. I found that the problem lies with the following declaration:
data: otf_info type SSFCRESCL.
I compared the structures on the different systems and they are identical. The only difference is the Support Package levels. The error occurs on the system with the higher support package - SAPKB64015 (basis and aba) whereas the other system is still at level 12 (SAPKB64012).
Any ideas what is causing the generation error and what could be done to fix it?
Regards
Liza-MarieHi ,
I think there may be some errors in function group errors.
Try the following :
T/Code : SMARTFORMSEnter the name of the form> Test--> This will leads to function module --> Utilities(Menubar)-=-> Repair function group --> Repair.
After repairing the function group --> Save and Activate.
Then transport the Smartform to other system .
Regards,
Lanka -
Getting a sid's generation error while activating DSO
Dear All,
We are created a standard dso on top of generic data source. This data source is created on top CDHDR and CDPOS tables through function module.
While acting the DSO , We are getting a sid generation error.
Please let me know the process to resolve the issue or tell me any other alternative solution is available to overcome this situation.
Thanks
Regards,
Sai.KDear All,
Thanks for your prompt response and please find the below attachment.Here , the info object fetches some hexa decimal values due to that it got failed.
Please let me know solution to overcome the this error.
Thanks
Regards,
Sai.k -
Generation Error - when trying to publish a Java web service
Hi All,
I keep getting the following Generation Error -- java.util.NoSuchElementException_ when I'm trying to create a Java Web Service using the jdeveloper wizard.
I have 2 entities and 2 stateless session beans acting as their facades. One entity has a One-One(FK) relationship with the other entity. I test out the entities and session beans using the test client and the OC4J embedded container and everything seems to work. When I try to generate a Java WebService from one of the entities I keep getting the "Generation Error". Could someone please provide me with some insight into why I'm facing this problem, because it seemed fine when I published J2EE web services previously and now this happens and I cant seem to publish web services anymore. Everytime I keep getting the same GenerationError. Thanks in advance.Without going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.
-
Generation error during WebDynpro migration from 7.0 to 7.31
Hello everybody!
We are trying to migrate some WebDynpro DCs to NW 7.31. After checking in the old sca file into the new track, synching the DCs in NWDS and creating projects for them, most of the DCs compile ok, but we get a build error in one WebDynpro DC we are not able to resolve.
The build.log shows
[wdgen] [Error] Generation error while processing <somepath>/NWDSWorkplace_7_3.jdi/2/t/C5FB4D1181864A07E2DF8F1E8D280266/gen_wdp/packages/de/xxx/somepath/wdp/Resource<myview>.properties (java.lang.reflect.InvocationTargetException)
with the stack trace showing an Generation error while processing template defaultResource:
[wdgen] [Info] Generation error while processing template defaultResource
[wdgen] [Info] Catching throwable null
[wdgen] [Info] java.lang.reflect.InvocationTargetException
[wdgen] at sun.reflect.GeneratedMethodAccessor114.invoke(Unknown Source)
[wdgen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wdgen] at java.lang.reflect.Method.invoke(Method.java:597)
[wdgen] at com.sap.ide.generationfwk.task.GenerationTaskJavaMethod.executePersistent(GenerationTaskJavaMethod.java:139)
[wdgen] at com.sap.ide.generationfwk.GenerationBase.doPersistentGeneration(GenerationBase.java:207)
[wdgen] at com.sap.ide.generationfwk.GenerationBase.doPersistentGeneration(GenerationBase.java:164)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentDefaultResource(Generation.java:541)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentResources(Generation.java:3188)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1788)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1772)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1772)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.generateComponentsForArchive(Generation.java:2660)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.generateMDOsForArchive(Generation.java:2604)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.generatePersistentArchive(Generation.java:1630)
[wdgen] at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:190)
[wdgen] at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:69)
So far, everything I could find is pointing to some localisation issue, but I'm not able to solve the problem. Some hints say I'd have to change the language settings of the DC (or SC) upon import, but I never saw anything that gave me an opportunity to do so. On the other hand, other WebDynpro DCs in the same track get imported o. k. and compile without any error.
The other thing I see in this WebDynpro DC is that in some views, all GUI element texts are missing, some views are o. k.
Can anyone shed some light on this issue ?
Thanks
MichaelOk, I can provide some more information:
In the WebDynpro DC's .dcdef file, I changed
<properties>
<localization xmlns="http://xml.sap.com/2003/06/Localization" xmlns:ns0="http://xml.sap.com/2003/06/Localization">
<domain>BC</domain>
<originalLocale>en</originalLocale>
</localization>
<minimizeClassFiles xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro" xmlns:pns1="http://xml.sap.com/2004/07/DCProperties/WebDynpro">auto</minimizeClassFiles>
<projectVersion xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro">1</projectVersion>
</properties>
to
<properties>
<localization xmlns="http://xml.sap.com/2003/06/Localization" xmlns:ns0="http://xml.sap.com/2003/06/Localization">
<domain>BC</domain>
<originalLocale>de</originalLocale>
</localization>
<minimizeClassFiles xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro" xmlns:pns1="http://xml.sap.com/2004/07/DCProperties/WebDynpro">auto</minimizeClassFiles>
<projectVersion xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro">1</projectVersion>
</properties>
After that, the views with previously missing GUI texts were showing these texts inside the NWDS WebDynpro view editor, and those views that did previously show these text didn't show them any more! So there seems to be some discrepancy regarding the language the views were created in.
Any hint on what files have to be changed in what way to either remove internationalization completely or to set all views to a single language ?
Thanks
Michael -
I tried to update my iTunes, but I keep getting a runtime error R6034 attempt to run C runtime library incorrectly. I also got an Error 7 (Windows error 1114). Now my currently iTunes will not open.
Hey twhitten!
Here is an article that will help you troubleshoot this issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
Generic oracle eway code generation error in Java caps 5.1.3
Hi,
I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
at org.openide.util.Task.run(Task.java:136)
at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
... 10 more
Regards,
Abdulhi...
i too getting same problem..how did u reslove this...
please help me out...
thanks in advance
KK -
Content generation error. Failed to open the InDesign file.
Hey all -
In importing an article to a folio, I just received this error:
"Content generation error.
Failed to open the InDesign file. Please confirm the file can be opened in InDesign."
The file is open right now in InDesign. I can close it and reopen it with no errors.
I've tried resaving the article to a new file. No help.
I tried creating a new folio and importing the article there. No help.
All links are good. It's a simple file with images, a scrolling pane, and some buttons that link to other articles.
Anyone else run into this problem? Any solutions?
Thanks!Im getting this error also....?
Want to avoid inporting each artical on at a time. Need to import multiple articals at once.
Thanks.
Maybe you are looking for
-
How do i create folders and lock pdf
I am using a hp tablet and on adobe reader i have opened a form with blank areas which require typing in and drop down menus to select pre determined responces to particula questions. This all works brilliantly, I now what to edit the file a number o
-
Windows 7 Professional downgrade from Windows 8.1 Pro OEM
Hi, I purchased new computers for a small business with Windows 8.1 Pro OEM licenses and disks. I was intending to install windows 7 Pro using downgrade rights but when I enter the product key that came with Windows 8.1 it gives me an error with "Inv
-
G505s: Adobe Flash Games Running Laggy & How to Enable Dual Mode?
I keep hearing about how the G505s has a dual graphics mode. What confuses me is that when I am playing some adobe flash games online, I am noticing considerable lag, while some Win8 App games and MMOs run perfectly fine along with having quality gra
-
Search username in XI communication channel
Hi, is there any way to know user name for example "ABC" is being used in which XI communication channel, other than going into each channel and looking for the required user name? Thanks.
-
Create a glossary/element index in WebCenter Portal
I need to create a glossary/element index like this in WebCenter Portal. Do you know if exists any ADF/Trinidad element to do this? Thank you