Runtime error in Standard program "SAPMV45A"

Hi Expert,
i am getting problem in BDC , While creating the (sales order) VAO1 ,dump is occurs in standard program SAPMV45A. Because of in FM "Pricing_Dialog_Tabstrips" is incorrect and TAXI_TABSTRIP_C and TAXI_TABSTRIP_ITEM" specified here is a different field type.This is standard program we can not change field type. Kindly provide any OSS notes for this or any other solution.
STANDARD PROGAM - SAPMV45A
INCLUDE PROGRAM - MV45AF0F_FCODE_PKO4
ERROR - Runtime Error CALL_FUNCTION_CONFLICT_TYPE has occurred
Kindly help me, Its very uigent
Thanks & Regards
Md.MahaboobKhan

Hi Archana ,
Check is there any Inactive Versions in ur Systems ?
useful tcodes are SPAU /SPDD for tables
Regards
prabhu

Similar Messages

Dump occured in standard program SAPMV45A (order creation)

hi,
In order creation, a dump is occured in standard program SAPMV45A. Because of in FM "Pricing_Dialog_Tabstrips" is incorrect and TAXI_TABSTRIP_C and TAXI_TABSTRIP_ITEM" specified here is a different field type.This is standard program we can not change field type. Kindly provide any OSS notes for this or any other solution.
STANDARD PROGAM - SAPMV45A
INCLUDE PROGRAM - MV45AF0F_FCODE_PKO4
ERROR - Runtime Error CALL_FUNCTION_CONFLICT_TYPE has occurred
Kindly help me, Its very uigent
thanks in advance.

hi
Please note SAP redesigned the condition screen and it's
underlaying logic completely starting with release 4.6A.
Hence you should not use the function codes PKON and KKON any longer.
Furthermore screen 6201 and all includes stored in program pool SAPMV61A
are not used by the standard any more. The new condition sub-screen
is placed in program pool SAPLV69A and triggered by function
codes KKO1 (= jump into header condition screen) or PKO1 (= jump into
item condition screen). Further details you can find in the SAP
note 360942.
So, In release 470 & above , function code PKON to display the conditions in a
sales order via VA01, VA02 and VA03 may lead this short dump. To avoid
this short dump, I recommend you to use the function code PK01 instead
Hope this helps
Paul Quinn

RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ''

Hi,
While executing the below code i am getting the error
" RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ' ' am new to ABAP , can anyone kindly help me where i have went wrong ? .
IF ( V_DO_CDS_NAME_MAIN <> '' ).
    ABAP.
        DATA: ref_it_tab TYPE REF TO data,
              ref_wa TYPE REF TO data.
        FIELD-SYMBOLS: <fs_itab> TYPE ANY TABLE.
        FIELD-SYMBOLS: <fs_wa> TYPE ANY.
        FIELD-SYMBOLS: <fs_field> TYPE ANY.
        CREATE DATA ref_it_tab TYPE STANDARD TABLE OF (V_DO_CDS_NAME_MAIN) WITH NON-UNIQUE DEFAULT KEY.
        ASSIGN ref_it_tab->* TO <fs_itab>.
        SELECT * FROM (V_DO_CDS_NAME_MAIN) INTO TABLE <fs_itab> where C1 = V_WORK_ITEM_ID_MAIN.
        CREATE DATA ref_wa LIKE LINE OF <fs_itab>.
        ASSIGN ref_wa->* TO <fs_wa>.
        loop at <fs_itab> assigning <fs_wa>.
            assign component 'CLIENT' of structure <fs_wa> to <fs_field>.
            V_CLIENT = <fs_field>.
            assign component 'C0' of structure <fs_wa> to <fs_field>.
            V_C0 = <fs_field>.
            assign component 'C1' of structure <fs_wa> to <fs_field>.
            V_C1 = <fs_field>.
            assign component 'C2' of structure <fs_wa> to <fs_field>.
            V_C2 = <fs_field>.
            assign component 'C3' of structure <fs_wa> to <fs_field>.
            V_C3 = <fs_field>.
            assign component 'C4' of structure <fs_wa> to <fs_field>.
            V_C4 = <fs_field>.
            assign component 'C5' of structure <fs_wa> to <fs_field>.
            V_C5 = <fs_field>.
            assign component 'C6' of structure <fs_wa> to <fs_field>.
            V_C6 = <fs_field>.
            assign component 'C7' of structure <fs_wa> to <fs_field>.
            V_C7 = <fs_field>.
            assign component 'C8' of structure <fs_wa> to <fs_field>.
            V_C8 = <fs_field>.
            assign component 'MESSAGE_ID' of structure <fs_wa> to <fs_field>.
            V_MESSAGE_ID = <fs_field>.
            assign component 'TIMESTAMP' of structure <fs_wa> to <fs_field>.
            V_TIMESTAMP = <fs_field>.
            assign component 'EXTRACTKEY' of structure <fs_wa> to <fs_field>.
            V_EXTRACTKEY = <fs_field>.
            assign component 'STATEID' of structure <fs_wa> to <fs_field>.
            V_STATEID = <fs_field>.
            assign component 'DEVICE_ID' of structure <fs_wa> to <fs_field>.
            V_DEVICE_ID = <fs_field>.
        ENDLOOP.
    ENDABAP.
ENDIF.

Hi Mubeen,
While Copying the cotes have come closer otherwise its working fine , i was able to find the error .
There are ten predefined ABAP data types. There are 100 possible type combinations between these elementary data types. ABAP supports automatic type conversion and length adjustment for all of them except type D (date) and type T (time) fields which cannot be converted into each other.
I commented the TimeStamp part where i had given the ABAP Type as D and it started working .
But now i want to display the content of "TimeStamp" field but i am not able to do so .
This is the format in which it has to be displayed 2009.011.915.3353.
Which ABAPTYPE i need to use ?.
i am able to display in this format 20090119153353
regards
Harsha

Syntax error in standard program after upgrade

Hi,
After upgrade from 7.0 to 7.3, we are facing a syntax error in standard program that is used in one of our process
The error says:
The field "G_REQUIDPARENT" is unknown, but there is a field with the s"
imilar name "G_REQUID_LAST". "G_REQUID_LAST"."
The system cannot find this object inside include LRSBM_REQUEST_GUIP04, that belongs to program SAPLRSBM_REQUEST_GUI
We assume that this is associated with the upgrade but we cannot find any solution in the web. Besides, this is a standard program so we cannot perform any change directly. We look for SAP Notes to apply but we didn't find nothing worthwhile
Basically, we are receiving a dump with the error message posted above and we found the syntax error, but the thing is that we don't know how to fix it, due to the fact that is a standard program and we cannot change it
I know that SAP could remove some object reference during the upgrade, but there should be an anticipated plan to fix this kind of errors, right?
Can you shed some light on this, please ?
Thanks a lot
Ale

Hi Ale,
If you make sure there are no customization around the object and SGEN already run, I think you can just open a OSS message to SAP to looking for a fix.
Regards
Bill

When I open Firefox I have to try several times because a Runtime Error with the program C:\Windows\System32\regsvr32.exe

when I open Firefox I have to try several times because a Runtime Error with the program C:\Windows\System32\regsvr32.exe

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "Continue in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

To find error message in the standard program sapmv45a

Hi friends,
I have a following senario.
Iam getting the following error mesage.
INFO RECORD FOR VENDOR 'ABC' AND MATERIAL '00000678' DOES NOT EXIST.
now my requirment is i should find from were this error message is being triggered.
actualy my problem is its in production server i dont have the acess to debug it.
even i dont have the mesage classs and mesage number also.
How can i catch this error mesasge from the program code
ie : by checking the code of the program SAPMV45A
Regards
Priyanka.

I got that mesage from ME13 tcode.
now my requirement is
in the line item i have material number '000000678'.
now the end user is chaning tht material number ie : he is chaning from '000000678' to ' 000000600'.
now for the ist material 000000678' the info record is maintained .
but for the changed material 000000600' the info record is not maintained. so iam getting the error mesage as below.
INFO RECORD FOR VENDOR 'ABC' AND MATERIAL '000000600' DOES NOT EXIST.
Now my reuiremnt is i should skip this error mesage even when the material is changed ( ie if the info record is not maintained ) .
ie : it sholud allow me to process the flow of va01 tcode
How can i do that.
or is there any other solution for that.
Regards,
priyanka.

Error in Standard Program for Purchase Order

Hello Everyone,
I am getting an ABAP Dump Error while Displaying & Printing Purchase Order using TCODE : ME9F & ME23N.
We have applied new Patches.
for Logistics it is 26 & ABAP it is 58.
I am getting Error in standard INCLUDE
Program : LMEDRUCKF1K at line 64.
The Error is :- "Field "ENJPREVIEW" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement."
Declaration for "ENJPREVIEW" is also available in
include LMEDRUCKTOP. still it gives an error.
These lines of code is included by SAP note 855263.
Before applying these Patches it was working properly, but now it gives an error.
Please , Can anyone give solution for this.
Regard's
Archana.

Hi Archana ,
Check is there any Inactive Versions in ur Systems ?
useful tcodes are SPAU /SPDD for tables
Regards
prabhu

Runtime error in print program of a smartform

Hi,
While trying to execute the print program of a smartform I am getting the following runtime error.
The reason for the exception is:
The call to the function module "/1BCDWB/SF00000288" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "IT_BOOKINGS".
Although the currently specified field
"IT_BOOKINGS" is the correct type, its length is incorrect.
In the form interface of the smartform under tables parameters I have declared like this.
IT_BOOKINGS LIKE SBOOK
IT_SCHEDULE LIKE SPFLI
Can anyone tell me why do we get this error?
Regards,
Hema

Hello,
program to call smartform is really simple :
-> function SSF_FUNCTION_MODULE_NAME give you the name of the function link to your sapscript.
-> function WFMC_PREPARE_SMART_FORM help your to prepare your options to your smartform.
-> function xxx to call your smartform (find with the first function).
Sometimes you have to play with values of NAST (for ex) to find the language (set in control_parameters) or for example if you want to print without display (when it ask you for print / print preview and the name of the print device) .....
Frédéric

Runtime error R6034 c:\program files\itunes\itunes.exe.

On january 25, 2014 I installed new version of itunes 11.1.4 and error occured: itunes was not installed correctly. Please reintall itunes. Error 7 (windows error) 1114.
Runtime Error: program c:\files\itunes\itunes.exe. R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the applications support team for more information.
I continue to get this errors and to reinstall itunes. I do not know if the cause is microsoft visual C++ or itunes installation has a bug that caused the problem.
Anyone know how to fix this problem. Cannot download lates version of Itunes.
Thanks

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99261)

HT1925 I downloaded the latest version of Itunes last night. I uninstalled all the apple products in order but the new version won't load. I keep getting a runtime error R6034 ProgramC:\Program files\Itunes/itunes.exe made attempt to load C runtime libr

Can't get the latest vesion of Itunes to download correctly. I keep getting a runtime error R6034. I tried uninstalling all the apple components in the order given. anyone having any good advice to solve my problem?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.

Runtime Errors SYSTEM_RUDI_INVALID main program /CRYSTAL/PUBLISHER

Hello,
we try to publish reports with transaction /CRYSTAL/RPTADMIN.
If we publish only one report in dialog we don't have problem. Also if we publish a few report in background.
But if we try to publish more than one report in dialog (publish (F8) or overwrite (F6) we get a runtime error SYSTEM_RUDI_INVALID.
Extraction from the error:
Short text
Invalid addressig handle "RUDI_NULL".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLSH3A" program had to be terminated because the
ABAP processor detected an internal system error.
Error analysis
Invalid runtime object addressed.
How to correct the error
The internal system error cannot be fixed by ABAP means only.
You may be able to find a solution in the SAP note system. If you have
access to the SAP note system, try searching for the following terms:
"SYSTEM_RUDI_INVALID" " "
"SAPLSH3A" or "LSH3AU06"
"LOGONDATA_GET_A"
Information on where terminated
Termination occurred in the ABAP program "SAPLSH3A" - in "LOGONDATA_GET_A".
The main program was "/CRYSTAL/PUBLISH_WORKER ".
In the source code you have the termination point in line 1
of the (Include) program "LSH3AU06".
We've got a Netweaver 7.02 BW system with Kernel 7.20 PL 86
We found several notes with the error SYSTEM_RUDI_INVALID, which all are related to kernel patches. But nothing which match to our problem.
Any ideas?
Best regards
Petra Wöritz

Hi,
I would suggest you open a message with support so that they can take a look at the system.
Ingo

Unicode Error in standard program

Hi,
Iam working on an upgrade project
I am getting an error as below
"In Unicode, DESCRIBE LENGTH can only be used with the IN BYTE MODE or CHAR mode"
How to fix this error, as the error is from STANDARD PROGRAM "Include /IXOS/LDC_CF01"
I know the answer to fix it, But since it is a STANDARD PROGRAM ,how to modify standard program\
Thanks,
Arjun

Dear Arjun,
I had to make some adjustment to an upgrade recently where we also had to upgrade programs to be UNICODE compliant.
And we had to do this for Custom and Standard programs.
So, before writing a message for SAP, go to transaction:
UCCHECK
It was using this transaction that I adapted my Standard SAP programs.
So you should be ok with this as well....
If you have been there already, then by all means do write a message to SAP.
Kind Regards
/Ricardo Quintas

Error in standard program RFBIBL00 - BBSEG-PRODPER 000000

Hi alls,
        I'm tring to execute the standard program RFBIBL00 with a file prepared by a my Z program but it stopped with the following message:
BBSEG-SEND /
BBSEG-PRODPER 000000
Editing was terminated. "
I tried to execute the same thing with a file prepared by the standard program RFBIBLT0 but tye systems stopped with the same error.
I found the SAP note 1171612 and I applied it because I'm working on SAPKH6008 patches but the same error occured.
In order to solve my problem (I only have to execute the standard Batch Input!! and in this step I'm only verifying the file) What do I have to do?
thanks
         Gino

Hello,
We get this error if the file format is wrong. The data depends on version too!!
Are you doing Batch input by using ZBSEG?
If yes, prepare file as per ZBSEG in ur system like below example.
If suppose ZBSEG has structure like below.
STYPE     STYPE_BI     CHAR     1
TBNAM     TABNAME     CHAR     30
NEWBS     NEWBS     CHAR     2
File should be like below.
1ZBSEG(25 spaces as it has to be 30 total)40
IF any field is blank, u should take special char / with same length which is in structure.
Above fields, wrbtr, prctr and newko are mandatory.
Then it should work.
check the test file format thoroughly
Regards,
Subbu

When trying to download jave have runtime error progran c:/program files/mozella\firefox exe R6205 - pure virtual function call

I have been having problems logging in and had to go to system set not quite knowing what I am doing I sent and changed to configure default, then when I went in my plugin crashed so I tried to update java again an got the above area message,Runtime error program c:/ program files\mozilla\firefox\firefox exe R6205 -pure virtual function call. I also tried to update my driver but as soon as they started checking updates mozilla shut down

Try checking this guide on [http://www.pcperformancetools.com/runtimeerrors.htm
runtime error download] It discusses step-by-step instructions on how to diagnose and repair windows runtime problems. They also got a free tool to clean-out and repair corrupt associations in the Windows Registry automatically.

Errors in standard programs after refresh

Hello Experts,
We recently upgraded our system to ERP EHP5.
Before that we have taken the refresh from Prod-QA system.
After the refresh there were transports which we didn't imported on QA since it was thought that the system should be tested as it is Prod.
But now the system are upgraded and we imported last 4 months transport including the SPDD/SPAU transports again,we are getting lot of dumps in standard programs like STMS,VA01 etc.
How should we correct this error situation and what will be best approach here.
Regards
Ajay Sandal

Hi Ajay,
The 4 months transports are from upgraded Dev system or Older SP transports ? Generally, pre upgrade Support Pack transports are not recommended in the upgraded system. You need to check the Objects which affect the upgrade Objects before importing the transports in the release notes.
If your transports from Older SP, then
I guess, you need to Restore the backup after the upgrade and recollect the transports with new objects.
2). Restore before upgrade backup, import the transports and upgrade again.

Runtime error in Standard program "SAPMV45A"

Similar Messages

Maybe you are looking for