Runtime error. nimxs.exe abnormally terminated by Visual C++ Runtime library

Hello, I installed without a glitch Labview 8.6 evaluation on my notebook (WXP, SP3). I could not launch the software from the outset and keep getting MS Visual C++ Runtime Library Runtime Error about nimxs.exe abnormally terminating the Runtime.
I had not worked with the development software previously. I only had Runtime Engine 7.1 on my computer to work with older VIs that had been working flawlessly. Idi not develop these VIs and had not modified them. I removed the Engine from the computer and rebooted several times to no success. The forum discussions about this kind of error are not pertinent to this problem of installation that has never worked. I tried to disable firewall and antivirus and added nimxs.exe to the firewall's enabled software, again to no success.
Can anyone help? Thanks in advance

Hello David,
it did not help. Since I could not run LabVIEW any time I do not think the database got corrupted. The message (snapshot attached) appears on the computer start up. I would suspect the firewall, but disabling it did not help either.
Petr
Attachments:
Clipboard01.jpg ‏19 KB

Similar Messages

CS5 Runtime Error Photoshop.exe

I've had CS5 since 17 May and several times, when trying to open a file from Bridge, I get 'Runtime Error Photoshop.exe' - annoys the you-know-what out of me!!!
It happens:
starting the computer again from Standby mode - means I have to Restart the computer each time, and
changing Preferences - in Bridge and Photoshop. Not sure which Preferences cause the Runtime Error, so I'm stuck with default settings.
Tech Support advised me that it 'might be due to damaged preference files and to recreate the Photoshop preferences file ... too complicated for this little black duck.
Anyone else have similar problems and, if so, have you managed to fix it. If you have, could you explain how in KISS terms.
Ta!

Just a general comment...
It may not be "green" but I never, ever allow my computer to go into Standby mode. If you read the Microsoft forums, it becomes clear that Windows has always been rife with problems that occur after "waking" a sleeping computer. Maybe it's just something that's not tested that much. Note that I'm specifically talking about "Standby", not "Hibernate".
In general heat and power cycles are harder on computer hardware than just keeping it on at a steady temperature. That said, make sure and clean the dust out occasionally, as it will accumulate faster when a computer is left on.
Some say disk drives might have shorter lives if left on, but my experience, working an entire career in large companies with lots of computers, is just the opposite: By FAR we saw more drive failures after power cycles. On desktops that people would turn off, disks wouldn't spin up, or just started failing to read properly. By contrast, there were whole banks of computers in test labs, for example, that just stayed on 24/7 on UPS power and never had any problems. Our IT department finally advised everyone to leave their systems on when they went home, which also facilitated software maintenance and backups.
I know this can't help in some cases, e.g., laptops, but if you are willing to spend the money for a little more power, avoiding the use of "Standby" on a desktop system is a workaround that can actually help stabilize computer operation.
-Noel

Itunes.exe and itunesHelp give errors as they are accessing the visual C runtime library incorrectly

Hi,
Itunes updated and my windows has problems with it. The error message says that itunes.exe and ituneshelp.exe both are failing to access the Microsoft Visual C runtime library correctly on startup. This happens even after uninstalling and reinstalling iTunes on my Windows 7 PC. I would really appreciate a solution to this as I now cannot get iTunes to work at all.

Hello Aberpotter,
It sounds like you are unable to launch iTunes due to this runtime error you are getting. I recommend the troubleshooting from the following article named:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Runtime error Outlook.exe with Acrobat 7.0.9

I use Acrobat 7.0.9 professional with Office 2000. When using Outlook I get often messages "Microsoft Visual C++ runtime library Runtime error! Program: X:\Apps\Microsoft Office\Office]Outlook.exe This application has requested the Runtime to terminate it in a unusual way. Please contact the application's support team for more information."
This error message shows up after deleting a message. Not always. The operating software is Windows XP.

1 - the latest is 7.1
2 - microsoft has one (maybe two) runtime fixes
go to http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
search for the text of the error message, or "something like"
runtime update
and follow the links to find the download

Runtime Error CSS_Splash.exe

I recently setup a new notepad computer. Then I made it part of our network as a User. When I login as the User, I get the following error message.
Runtime Error. Program: ...ram Files\Lenovo\Client Security Solution\css_splash.exe
This application has requested the RunTime to terminate it in an unusual way. Please contact the application's support team for more information.
After clicking on OK, everything appears to work properly. Should I be concerned?
Thank you.

Search for the file css_splash.exe and rename to css_splash.exe.old. At next login the correct Client Security Solution screen displayed instead of the runtime error message.

Runtime error itunes.exe

for about 2 months when I add pdf files to the library I get the following error message:
runtime error
Program: c: \ Program Files (x86) \ iTunes \ iTunes.exe
This application has request the runtime toterminate it an unusual way.
then itunes crashes and closes.
Can you give me directions on how to solve the problem?
Use WIN7 64bit
thanks

for about 2 months when I add pdf files to the library I get the following error message:
runtime error
Program: c: \ Program Files (x86) \ iTunes \ iTunes.exe
This application has request the runtime toterminate it an unusual way.
then itunes crashes and closes.
Can you give me directions on how to solve the problem?
Use WIN7 64bit
thanks

TS3212 I'm getting a runtime error R6034--an attempt to load the C runtime library was done incorrectly. Please contact the application's support team for more info

I just purchased an I phone and I needed to install a more recent version of I tunes on my computer. I've tried installing different version of the 11 and then uninstalled and reinstalled but I keep getting this error message and I can't open I tunes on my computer. Any ideas that I can try as I'm running out of patience! Thakns, K

Hello, salemk.
Thank you for the question. I see you have uninstalled, reinstalled and the error is persisting. Try one more time uninstalling all components of iTunes in the order specified of the article below. These steps must be processed in the order specified or the error will persist. Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
If the issue persists, you will need to process the steps in the article below for each component and reinstall.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

TS1717 Reinstalled iTunes because the one I had refused to update. Now that it is installed, when I launch it I get the following error message which is terminal: "The file "i Tunes Library.itl" cannot be read because it was created by a newer version of

I went through the entire uninstall process including deleting all my temp files before reinstalling.

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

When firefox opens it says microsoft visual c++ library runtime error program abnormal termination

when i opens Firefox it takes some time and pop up a small window that shows Microsoft visual c++ library runtime error program need abnormal termination when press OK it get disappeared and causes Firefox termination without loading ,during this time Firefox uses maximum CPU space

These are Screen Shots of what is happening.

Acrobat 7.0 Professional Runtime Error

I beg for help... I am trying to launch my Adobe Acrobat 7.0 Pro application and am now receiving a runtime error message. It says, "Microsoft Visual C++ Runtime Library. Program C:\Program Files\Adobe\Acrobat\Acrobat 7.0\Acrobat\Acrobate.exe." Then it crashes on me... It was fine yesterday, now today, not loading. I've uninstalled and reinstalled. I always install to My Documents.
Please help... Thank you.

Thanks for that SimonATS
Had a look and have resolved the issue thanks to your post, I ran adobe under an admin account (which allows access due to allowing permissions on top level) ran the updates under the "Help" tab and upgraded it to 9.2, then ran perfect !
If anyone else experiences this issue would suggest running updates, but if you cant run the program full stop ! would suggest SimonATS suggestion, that will get you back up and running

I am getting a runtime error message when attempting to install iTunes.

When attempting to install iTunes I keep getting a Runtime Error! message under the Microsoft Visual C++ Runtime Library. Anyone have this same issue and an idea on how to remedy?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Adobe Acrobat 8 - MS Visual C ++ Runtime Library Runtime Error!

ALl of a sudden as of yesterday I am getting the following error when opening Word 2003
MS Visual C ++ Runtime Library Runtime Error!
C:\Program Files\Microsoft Office\Office10\Winword.EXE
I have disabled the Adobe PDF addin, which successfully has suppressed the error. The client would like to continue using this toolbar.
I have done the following
Deleted Normal.dot file
Ran repair on Microsoft Office Basic 2003
Ensured Office SP3 and all latest patches applie
Restarted computer, looked for Adobe updates (none available)
Ran Detect / Repair on Adobe Acrobat 8.1.3 which successfully re-installed AdobePDF Word Plugin
Uninstalled all Adobe Products
Restarted computer / reinstalled Adobe Acrobat Pro
I have also tried renaming the .dll file.
What are my next steps?
Thanks in advance

Oligarlicky,
Have you sent PaulRB a private message with your crash logs and reports? Try that out and see if you can get a response (make sure you reference this thread).
If you don't hear back, I would recommend reposting your issue in new thread with some more details specific to your application. This thread has been relatively inactive and you might get better exposure by starting fresh.
Regards,
Neil Dorsey
Applications Engineering
Neil
Applications Engineering
National Instruments
www.ni.com/support

RoboHelp 7 Crash - MS Visual C Runtime Error

I have been using RH7 for many months. Today, I was using Single Source Layout > Printed Documentation > Properties. And it crashes without doing any more than looking at the dialogue; sometimes when setting the location for the output.
I get a Microsoft Visual C++ Runtime Library "Runtime Error" - RoboHTML.exe ... "The app has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
This has now happened 3 times in a row. On one occasion I was warned of a corrupted $StylePrepFile.htm, which I deleted and tried again.
I have rebooted; I have run Norton SystemWorks diagnostics to repair system errors. But it's still doing it.
I have tried deleting the CPD file, but it still crashes on this project. When I click on the OK button in the error message dialogue, RH disappears instantly. But you cannot re-open RH and then open the project again because it tells me it is locked by another instance of RH. I looked in Task Manager, and RoboHtml.exe is still loaded. I have to delete it here before I can reopen it and load the project.
A thought: I have been trying RH8 in Trial mode, and decided not to upgrade just yet; so I uninstalled it. Would this cause problems with RH7? If so, how do I fix it?
Any ideas anyone?

Thank you for your suggestion, Peter. I tried it and this is what happened.
I had trouble with two separate printed doc layouts. So I loaded a recent backup copy of the project, and tried adding a new Print layout. I used the same conditional build tags. I built the output, which went through its normal slow processing, and then, at the end, I got an error message like this:
The Output View showed a long log of the build:
===========================================
Starting to build Printed Documentation...
Printed Documentation processor 7.00.145
Building D:\!Active clients\Client BP Sunbury\Client BPOSS Shipboard\Copy of Backup copy 90610 BPOSS_SB_Source\!SSL!\Inst_Setup_Upgrade_Restore_Guide_BP_-_PDF\Inst_Setup_Upgrade_Restor e_Guide_BP_-_PDF.doc ...
Preparing to create Printed Documentation...
Clearing output folder...
Preparing files for Print Document...
Copying files...
Updating files...
Finished preparing in 11 seconds.
Preparing environment...
Printed Document Generator Environment: Word 11.0.8307, OS 5.1.2600, RAM 1535 M Bytes
Building Printed Documentation 'Inst Setup Upgrade Restore Guide BP - PDF'...
Building Single Document 'Inst_Setup_Upgrade_Restore_Guide_BP_-_PDF.doc'...
Building 'TitlePage Installation & Setup Guide - BP Ships'...
Warning: The Word Document became corrupt when attempting to append a malformed topic: 'TitlePage_Installation_&_Setup_Guide_-_BP_Ships.htm'
Failed to build 'TitlePage Installation & Setup Guide - BP Ships'...
Failed to generate section 'TitlePage Installation & Setup Guide - BP Ships'...
Building 'Table of Contents'...
Preparing to build chapters...
Building 'Installation and Setup Guide'...
Warning: The Word Document became corrupt when attempting to append a malformed topic: 'Installation_and_Setup_Guide.htm'
Failed to build 'Installation and Setup Guide'...
Building 'Installing BPOSS Shipboard.'...
Processing 'Minimum System Requirements'...
Processing 'Installation Concepts - BP Ships'...
Warning: The Word Document became corrupt when attempting to append a malformed topic: 'Minimum_System_Requirements.htm'
Processing 'Download BPOSS Shipboard Files'...
Warning: The Word Document became corrupt when attempting to append a malformed topic: 'Installation_Concepts_-_BP_Ships.htm'
Warning: The Word Document became corrupt when attempting to append a malformed topic: 'Download_BPOSS_Shipboard_Files.htm'
Failed to process 'Download BPOSS Shipboard Files'...
Fatal Error: Word Document got corrupt. Abort building 'Installing BPOSS Shipboard.'.
Failed to build 'Installing BPOSS Shipboard.'...
Failed to build 'Installing BPOSS Shipboard.'...
Building 'Configure AMOS Mail'...
Processing 'Configure AMOS Mail for BPOSS'...
Warning: The Word Document became corrupt when attempting to append a malformed topic: 'Configure_AMOS_Mail_for_BPOSS.htm'
Failed to build 'Configure AMOS Mail'...
Building 'System Setup - BP Ships'...
Processing 'Initial Setup - Authorisation Codes'...
Warning: style (p.ListBullet) is not defined and will be mapped to 'Normal'.
Warning: The Word Document became corrupt when attempting to append a malformed topic: 'Initial_Setup_-_Authorisation.htm'
Failed to process 'Initial Setup - Authorisation Codes'...
Fatal Error: Word Document got corrupt. Abort building 'System Setup - BP Ships'.
Failed to build 'System Setup - BP Ships'...
Failed to build 'System Setup - BP Ships'...
Building 'Restore Data from Backup.'...
Processing 'Primary Restore Data Procedure'...
Processing 'Secondary Restore Data Procedure'...
Warning: The Word Document became corrupt when attempting to append a malformed topic: 'Primary_Restore_Data_Procedure.htm'
Warning: The Word Document became corrupt when attempting to append a malformed topic: 'Secondary_Restore_Data_Procedure.htm'
Failed to build 'Restore Data from Backup.'...
Building 'Help Desk'...
Processing 'Technical Support'...
Warning: The Word Document became corrupt when attempting to append a malformed topic: 'Technical_Support.htm'
Failed to process 'Technical Support'...
Fatal Error: Word Document got corrupt. Abort building 'Help Desk'.
Failed to build 'Help Desk'...
Failed to build 'Help Desk'...
Failed to build one or more chapters.
Building 'Glossary'...
Failed to build 'Glossary'...
Building 'Index'...
Updating list paragraphs...
Updating images...
Updating page numbers...
Updating page headers...
Updating Table of Contents...
Updating Index...
Saving 'Inst_Setup_Upgrade_Restore_Guide_BP_-_PDF.doc'...
Generating 'Inst_Setup_Upgrade_Restore_Guide_BP_-_PDF.pdf'...
Failed the generate PDF file 'D:\!Active clients\Client BP Sunbury\Client BPOSS Shipboard\Copy of Backup copy 90610 BPOSS_SB_Source\!SSL!\Inst_Setup_Upgrade_Restore_Guide_BP_-_PDF\Inst_Setup_Upgrade_Restor e_Guide_BP_-_PDF.pdf'...
Failed to save 'Inst_Setup_Upgrade_Restore_Guide_BP_-_PDF.doc'...
Cleaning up temporary files...
Internal error encountered, Failed to generate Printed Documentation.
===========================================
As you see, this is full of Warnings - I think it reports every topic as Malformed.
The final output is a word doc that fails to load when I double-click on the filename.
If I load MS Word 2003 and load the file, it disables Word such that where the document should view, the area is white all over and the scroll bars are disabled. I can switch between Normal View, Print view etc, but all look the same white area.
If I load a "good" word document, the same problem - all white and no text. Something has gone badly wrong. See short movie:
RH7 does not offer the option of a repair, so I would have to uninstall and reinstall.
This is an important Help project, so I've got to fix it somehow...
Any idea, anyone?

ERROR: Abnormal termination of connection

Hi All,
We recently upgraded to Oracle Forms 6i in character mode, running on HP Unix 11.11. My users frequently crash. The screen changes to just a few characters on the right hand side. There are dump files in the forms directory -- one follows. The error message is Abnormal termination of connection, Error Code: 1
Any clues or hints would be greatly appreciated.
Thanks
Jim Barnhart
[email protected]
/u15/acpt/apps/src/frm: cat f60run_dump_960
[Fri Feb 28 15:49:48 2003 PST]::Client Status [ConnId=0, PID=960]
>> ERROR: Abnormal termination of connection, Error Code: 1
FORM/BLOCK/FIELD: APS070:DETAIL_TRANS.PAYMENT_ID
Last Trigger: WHEN-TIMER-EXPIRED - (Successfully Completed)
Msg: <NULL>
Last Builtin: COPY - (Successfully Completed)
------------- Call Stack Trace [ConnId = 0, ProcId = 960] -------------
calling call entry argument values in hex
location type point (? means dubious value)
------------- End of Call Stack Trace -------------
/u15/acpt/apps/src/frm:

This is probably not Oracle Applications eBusiness Suite forms as 11i uses $ORACLE_HOME/forms60 and R12 uses $ORACLE_HOME/forms.
Since there are backslashes, if you are on Windows, use the following note to enable Dr Watson to capture some stack trace information on crashes:
Default Debugger on Windows NT/2000
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136627.1

I am getting a Miscrosoft Visual Runtime Error. How do I fix it.

Here is the error screen that pops up when I open Photodhop Elements 10. When I click ok Photoshop closes and will not do anything.
Here is the Photoshop Window.
What can I do to fix this?
Thank You

Lots of info here:
https://www.google.com/search?q=Miscrosoft+Visual+Runtime+Error.&rlz=1C1_____enUS421US421& oq=Miscrosoft+Visual+Runtime+Error.&aqs=chrome..69i57&sourceid=chrome&es_sm=122&ie=UTF-8#q =photoshop+elements+Miscrosoft+Visual+Runtime+Error

Runtime error. nimxs.exe abnormally terminated by Visual C++ Runtime library

Similar Messages

Maybe you are looking for