Runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's

Hello colleagues,
I always get the runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's
For instance, lets take Function Modules:
I tried almost any of them but in particular:
GRPC_API_CONTROL_QUERY Load the list of controls
GRPC_API_ISSUE_QUERY Retrieve issues of the case
GRPC_API_ORGUNIT_QUERY Load list of Organizations
GRPC_API_RMPLAN_QUERY Retrieve remediation plans of case
GRPC_API_RISK_CONTROLS Retrieve the controls of the risk
and etc.
All of them return the runtime error OBJECTS_OBJREF_NOT_ASSIGNED, however I've provided Object ID's in the right format,
The same is for corresponding classes,
Does anyone have such problem before?
Appreciate your responses,
Thank you,
Best Regards,
Anton

Hi Anton,
We need to pass value for I_SESSION_ID. Because, when i execute FM: GRPC_API_RMPLAN_QUERY by giving correct I_OBJECT_ID as shown below, i'm also getting the same error.
On executing..
Getting following dump.
And attached is the dump analysis .
Thanks
KH

Similar Messages

BSP Application Runtime Error OBJECTS_OBJREF_NOT_ASSIGNED

Hi,
Iam using the standard BSP application Employee (CRMM_EMPLOYEE). Iam trying to run from Portal and getting following error.
ST22 short dump info:
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
"OBJECTS_OBJREF_NOT_ASSIGNED" " "
"CL_CRM_BSP_IL=================CP" or "CL_CRM_BSP_IL=================CCIMP"
"GET_INSTANCES_OF_PRIMARY"
We already implemented the OSS note for this kind of issue.
0000616015
0000632746
Even we are getting this error
Any inputs???
Thanks,
DST
Message was edited by:
        DST

Hello,
check note: #989167
this should resolve the issue.
Best regards,
Dezso

Error '9' when calling service 'SO_OBJECT_SEND'

We are implementing travel module. The scenario is when the employee raises a travel request, after approving the mail should be sent back to the employee. This feature is provided by the standard.
However in the SEND_MAIL step the WORKFLOW Container variable 'Employee.Trip.User.Id' is not set owing to which the mail step gives out error.
Can anyone please guide us on the probable cause of the error ?? Where does the object TRIP gets the value 'TRIP.USER.ID' ??
Is it any setting issue ??
Please guide..

Hi
Run report HRALXSYNC and you will solve this.
We have faced this issue many times and the solution we have applied is
1. This issue occurs on a step that is dialog where some agent needs to either approver or reject.
2. You should check the rule (Agent determination rule in that step).
Run that rule with the workflow data (use scenario with which you are getting error).
Run the rule individually and check if you are getting right result.
this error most of the time id due to the fact that the rule is not be able to determine next processor of the workitem.
Error 9 when calling service SO_OBJECT_SEND SWF_RUN535
to assure you can hardcode the user for test in the rule and run the workflow as that is the most effective analysis that will help you determine the cause.
I have never seen this error on a background step unless there is a mail step involved.
You need to run the report HRALXSYNC to synchronize HR objects which will surely solve this issue.
regards
barin

Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.boots

When attempting to create a new Account in siebel integrated with OEDQ the following error occurs.
ERROR
Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.bootstrap.library.path)(SBL-APS-00118)
STEPS
The issue can be reproduced at will with the following steps:
1) from EDQ director we have imported the EDQ_CDS,EDQ-REFERENCE DATA & EDQ_HISTORICAl DATA packages sucessfully.
2) Created dnd.param file in SIebel server SDQCOnnector folder.
3) Copied the libdnd.so file to siebsrvr lib directory(32 bit)
3) In dnd.param file we have mentioned the javalib file and instllation directory path(<Siebsrvr roo>/dnd/install)
4) Unzipped the EDQ-Siebel Connector files in dnd/install folder
5) Copied the dnd.properties file in dnd/install directory and modified it accordingly to point to installed EDQ instance.
6) Configured the Siebel components for EDQ integration.
7) Realtime EDQ jobs are running.
8) Create a new Account
Env details are
On : 8.2.2.14 [IP2014] version, Client Functionality
EDQ 11.1.1.7.4
IBM JDK 1.7 32 bit
Using Open UI
Any Champ have faced this issue and overcame it please let me know the resolution steps. your help is
Regards
Monoj Dey
9007554589

Hi Monoj,
A few questions:
- What OS is Siebel running on?
- What version of the Siebel connector are you using?
- Which libdnd.so file are you using?
- What's the contents of your dnd.parms file?
thanks,
Nick

Runtime error OBJECTS_OBJREF_NOT_ASSIGNED has occurred

Hi All,
I am trying to run a MM42 BDC in the background and I am getting the error - Runtime error OBJECTS_OBJREF_NOT_ASSIGNED has occurred. Kindly help

Dear Klaus sir,
Basicalliy the data is coming from dot net to sap by rfc(zobd_upload) and into table zobd..
after that we are using one program where we can fetch the data from zobd table and using one bdc to update the likp table.but in production likp table is not updating and zobd table updated..
how to resolve that issue?
is any bdc problem?

Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED

Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                CX_SY_REF_IS_INITIAL
Date and Time          24.09.2007 11:27:19
Short dump has not been completely stored (too big)
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_TRIGGER_SELECTOR_PPF=======CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Hi ,
        Can you please provide me the solution for the above error, it is related to configuration of Service Desk on SAP Solution Manager.

Hi,
check these notes,
783918
660005
This should solve your problem.
if not please mention when you ran into this error, which would help in providing a solution.
Feel free to revert back.
--Ragu

Runtime error ddic_typeleng_inconsistent when i execute st03n?

Hi Experts,
I am getting runtime error DDIC_TYPELENG_INCOINSISTENT when i execute ST03N.
My server ECC6.0 ---Windows---Oracle 11.2.0.3.0
Kernel 7.21, Patch 201
Below i attached screenshot also.
Please Suggest.
Thanks & Regards
Pravin

Hi pravin,
After 720 kernel upgrade you will get this DUMP.
The 7.20 kernel checks complex DDIC structures in more detail than the previous kernels. Short
dumps of the type DDIC_TYPELENG_INCONSISTENT may occur, for example, when calling transaction SM66.
For more detailed information about correcting these inconsistencies, see Note 1610716.
The actions described in this note can be performed anytime, but we recommend to implement it
before the kernel switch.

How to correct Runtime error R6034 when attempting to update iTunes on PC?

How to correct Runtime error R6034 when attempting to update iTunes on PC?

Hey ievafromsa,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

TS2570 I am getting runtime error R6034 when opening iTunes i have followed all instructions on reinstalling and it still occars

I am getting runtime error R6034 when trying to open iTunes I have followed all instructions for reinstalling iTunes but it still occurs can any help please?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99537)

I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones. It works when calling any other brand of cell phone. Network carrier assures me problem is not on there side. Any assistance will be appreciated.

I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones. It works when calling any other brand of cell phone. Network carrier assures me problem is not on there side. Any assistance will be appreciated.

I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones. It works when calling any other brand of cell phone. Network carrier assures me problem is not on there side. Any assistance will be appreciated.

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Error 512 when calling PEOpenPrintJob

Post Author: gnilsen
CA Forum: Crystal Reports
Hello,
I'm using a product called Dexterity which is for the Microsoft Dynamics platform. We use crpe32.dll to run our crystal reports from our application. First of all, when Crystal 10 was installed we used crpe32.dll with a date of 06/13/2004 and my reports print just fine. When I upgrade to Crystal XI, initial install, I get a crpe32.dll with a date of 12/07/2004 and my reports don't print. I get the error 512 when calling PEOpenPrintJob. So I figured I would move up to SP4 for Crystal XI and which provided crpe32.dll 05/27/2007 1:12 AM. I tried to run the reports with that .dll and I run into the same error. From my research I see that error 512 is PE_ERR_ENGINENOTOPEN or Print Engine Not Opened.
Here is where my report is located and this is what I pass into PEOpenPrintJob: "C:\MBS\GP10\WennSoft\Crystal Reports\Service WIP Summary.rpt"
I have tried a few different approaches trying to get this to work and here is some of my troubleshooting ending up with no luck. I took my Crystal 10 report and saved it as a Crystal XI report and that didn't work. I tried to use the old crpe32.dll from Crystal 10 and the program is smart enough to grab the latest crpe32.dll from the C:\Program Files\Common Files\Business Objects\3.0\bin folder. The report does have sub reports in it, but my code starts with trying to get the main report Print Job first and it doesn't even get to the code for the sub reports. (I don't know if that helps but I trying to give as much info as possible.)
1) Is there anything I need to do different in Crystal XI?
2) Do I need to call something before PEOpenPrintJob?
Thanks in advance.

Hi Nayani
Please go to the technical WF log, select the mail step in error and check the container element ADDRESSSTRING - it should have valid values. If there is no value or at least one line, that is the cause of your error.....this means you will have to correct the method/process/code/ where you are fetching the email addresses.
regards,
Modak

Getting Error Message "Error '9' when calling service 'SO_OBJECT_SEND'

Hi All,
We are working on SRM5.0(with servier 5.5 paching 14) and ECC (R/3) with SAP appl 600(16 th patch).but the workflow is giving the error "Error '9' when calling service 'SO_OBJECT_SEND' and PO is still in the awating approval status.
Regards
Channappa Sajjanar

Hi,
See this related thread:
Re: Workflow Error -- Error' 9' when calling service ' SO_OBJECT_SEND'

SRM Workflow error- Error' 9' when calling service ' SO_OBJECT_SEND'

Hi Team,
We are facing problem with SAP SRM Workflow error- Error' 9' when calling service ' SO_OBJECT_SEND' .
Due to this WI is not going to Approver/Requester INBOX and unable to process that WI.
Please advice .
Greatly Appreciated for Help.
Regards
CK

Hi,
Not sure what '9' is, the exceptions called by the SO_OBJECT_SEND function are as follows:
EXCEPTIONS
               ACTIVE_USER_NOT_EXIST      = 35
               COMMUNICATION_FAILURE      = 71
               COMPONENT_NOT_AVAILABLE    = 01
               FOLDER_NOT_EXIST           = 06
               FOLDER_NO_AUTHORIZATION    = 05
               FORWARDER_NOT_EXIST        = 08
               NOTE_NOT_EXIST             = 45
               OBJECT_NOT_EXIST           = 13
               OBJECT_NOT_SENT            = 15
               OBJECT_NO_AUTHORIZATION    = 13
               OBJECT_TYPE_NOT_EXIST      = 17
               OPERATION_NO_AUTHORIZATION = 21
               OWNER_NOT_EXIST            = 22
               PARAMETER_ERROR            = 23
               SUBSTITUTE_NOT_ACTIVE      = 31
               SUBSTITUTE_NOT_DEFINED     = 32
               SYSTEM_FAILURE             = 72
               TOO_MUCH_RECEIVERS         = 73
               USER_NOT_EXIST             = 46
               OTHERS                     = 1000.
Regards,
Jason

Workflow Error -- Error' 9' when calling service ' SO_OBJECT_SEND'

Hi ,
Could you pls tell me what will be the reason for this Error' 9' when calling service ' SO_OBJECT_SEND'
Thanks & Regards,
Gopal

Hello
reason could be lot of things:
check the note 938147 for example...
Another helpful note is the 190669
regards,
daniel

Runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's

Similar Messages

Maybe you are looking for