Runtime Error on loading captivate 5

Hi.
Has anyone had the following issue with Captivate 5? I've been using on and off for a few weeks now and it's worked fine, until today. As i launch captivate 5 it loads up as normal to the front screen. I then select either blank project or an existing project and get the error message below. I've tried re-installing the upgrade from the disk but still no joy. I've trawled through the forums today but cannot find a specific issue like this.

Scrap that. As my upgrade still kept captivate 3 on my system, i opened 3 and then 5 again and it seems to be working. Strange but may help anyone else who has a similar issue.

Similar Messages

Runtime error while loading data into infocube

Hi all,
I am getting a runtime error while loading the transaction data into the InfoCube.
Exception name: CX_SY_GENERATE_SUBPOOL_FULL
Runtime error: GENERATE_SUBPOOL_DIR_FULL
Anyone has any idea about this error? Any help will be really helpful. Thanks in advance.
Regards,
Sathesh

Hi Sathesh,
Please provide more details for the problem.
You can go and check in ST22. Go through the Dump Analysis and Let us know.
Regards
Hemant Khemani

Runtime error while loading data in BI 7.0

Hi All,
While loading data in BI 7.0,
I am getting Runtime Errors "TSV_TNEW_PAGE_ALLOC_FAILED" . No more space available for extending internal table.
As per SAP BASIS SUPPORT comments:
"This is NOT a space problem but rather a huge memory resource consumption one, as you're trying to hold excessive amount of data in Memory, and that's when you get the short dump; I know that SAP sometimes is not clear in explaining the issue (ie "No more storage space available...."), but this refers to memory requirement, not disk storage space per se.
So, please try to break down your data load in smaller sets and this will work OK"
How to proceed with the above comments? How to break down data load in to smaller sets?
Please helpme....

there could be various ways -
using selections / filters in Infopackage / DTPs based on may be some period or some other char you could identify based on your data.
Hope it helps
Vikash

Runtime Error while loading Flat file in to ODS

Hi Friends,
I have 11 records in flatfile and I am loading it from PC. when I see in preview I can see.
But when I load it ,it gives me short dump. request status is in amber..
Please help me as this is urgent support issue.
The ABAP Runtime Error is
Runtime Error          CALL_FUNCTION_CONFLICT_TYPE
Except.                CX_SY_DYN_CALL_ILLEGAL_TYPE
Date and Time          02.01.2008 13:55:38
What happened?
    Error in ABAP application program.
The current ABAP program "GP44UKXZB8WE74CAKI38CZ0B586" had to be terminated
     because one of the
    statements could not be executed.
This is probably due to an error in the ABAP program.
A function module was called incorrectly.
What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
    date.
is especially useful if you want to keep a particular message.

Hi Sudhakar,
This seems to be a type conflict error. It occurs when you assign for example a char field to a numc field. So, I suggest you check your mappings and see if there is any type mismatch in the info objects. Hope it helps.
Thanks and Regards
Subray Hegde

Runtime error Object Required - Captivate 5

Hi,
Wondering if anyone else has come across this problem and found any solution.
I have created .swf using Captivate 5 and when I upload them to our learning environment (Learning Pool), the flash plays through to the end fine but clicking on next/menu (within the learning environment) I get Runtime Error, Line 52 Object Required.
Is there any publishing setting or anything that anyone has come across to make the swf work? (I have a call logged with our environment provider but obviously they don't support captivate so...)
Regards
Annabel

Are you uploading the Captivate content as a SCORM package to your LMS or are you just uploading the SWF?

PPro CS5 Runtime Error when loading exporteravi.prm

So while working on my other problems, I experienced a runtime error while opening PPro. I did some research, and saw that it might be a conflict with Quicktime, which I promptly uninstalled. I was testing a clip with my new settings (thanks to Colin Brougham ) after that, I experienced the same thing. I had to reboot in order to start the program again. Any idea what I need to do. This is a fresh install of Windows 7 (freshly installed not 6 hours ago), so its not a matter of junk programs. Help?

As it turns out, the file I was exporting had some issues at a certain point in the footage (too much audio at one time due to an operator error), and it was causing the crash, and that crash was causing the runtime error. I started using the queue function for the exporter, and it failed at the same time, but did not crash. I went back in to investigate the file at that point and just playing it in the timeline premiere crashed.
So long story short - it wasn't as big an issue as I thought, since its all related to that one clip.

Java iView Runtime Error while loading EP Logon page

hi,
When i load my Enterprise Portal from the url http://epserver:50000/irj/portal i am getting the following error page.
Anyone please help me in this issue.
The Error Page content is given below:
Java iView Runtime
Version : 6.4.200410200018
+ Copyright 2002 SAP AG. All rights reserved.
An exception occured while processing your request.
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in connection
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in connection
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:296)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
     at com.sap.portal.navigation.Gateway.service(Gateway.java:68)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: PortalRuntimeException
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:276)
     ... 24 more
Caused by: com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : com.sap.portal.runtime.system.hooks.ErrorComponent
     at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
     at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
     at com.sapportals.portal.prt.connection.ContentExceptionHandler.handleException(ContentExceptionHandler.java:67)
     at com.sapportals.portal.prt.connection.ContentExceptionHandler.handlePortalRuntimeException(ContentExceptionHandler.java:27)
     at com.sapportals.portal.prt.core.PortalRequestManager.handleRequestException(PortalRequestManager.java:917)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:803)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
     ... 24 more
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.prt.component.error.ErrorComponent of Portal Component com.sap.portal.runtime.system.hooks.ErrorComponent because: Could not instantiate implementation class
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:269)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
     at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
     at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
     ... 32 more
Caused by: com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.portal.themes.lafservice
     at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:413)
     at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:385)
     at com.sapportals.portal.prt.core.broker.PortalApplicationItem._refresh(PortalApplicationItem.java:505)
     at com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoader(PortalApplicationItem.java:1334)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.getClassLoader(PortalComponentItem.java:569)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getClassLoader(PortalComponentItemFacade.java:102)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
     ... 36 more
If this situation persists, please contact your system administrator.

hi sir,
i checked that .... J2ee Service is running.
Sorry for not including default.trc log file error in my first message.
Here it is ...
JMX connector exception occurred while processing external JMX request [ JMX request (java) v1.0 len: 314 | src: cluster target-node: 3584000 req: invoke params-number: 4 params-bytes: 0 | :name=com.sap.portal.prt.bridge.service.mbeans.PRTMBeanRuntime,j2eeType=PRTBridge_JMX_SECTION,SAP_J2EEClusterNode=3584000,SAP_J2EECluster="" null null null ]
[EXCEPTION]
com.sap.engine.services.jmx.exception.JmxConnectorException: Unable to de-serialize request parameters, message [ JMX request (java) v1.0 len: 314 | src: cluster target-node: 3584000 req: invoke params-number: 4 params-bytes: 0 | :name=com.sap.portal.prt.bridge.service.mbeans.PRTMBeanRuntime,j2eeType=PRTBridge_JMX_SECTION,SAP_J2EEClusterNode=3584000,SAP_J2EECluster="" null null null ]
     at com.sap.engine.services.jmx.RequestMessage.readParams(RequestMessage.java:531)
     at com.sap.engine.services.jmx.RequestMessage.getParams(RequestMessage.java:580)
     at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:90)
     at com.sap.engine.services.jmx.JmxServiceConnectorServer.receiveWait(JmxServiceConnectorServer.java:172)
     at com.sap.engine.core.service630.context.cluster.message.MessageListenerWrapper.process(MessageListenerWrapper.java:81)
     at com.sap.engine.core.cluster.impl6.ms.MSListenerThread.run(MSListenerThread.java:47)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
     at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
Caused by: javax.management.InstanceNotFoundException: MBean with name com.sap.default:name=com.sap.portal.prt.bridge.service.mbeans.PRTMBeanRuntime,j2eeType=PRTBridge_JMX_SECTION,SAP_J2EEClusterNode=3584000,SAP_J2EECluster=NET not found in repository
     at com.sap.pj.jmx.server.MBeanServerImpl.getClassLoaderFor(MBeanServerImpl.java:1408)
     at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.getClassLoaderFor(MBeanServerWrapperInterceptor.java:455)
     at com.sap.engine.services.jmx.CompletionInterceptor.getClassLoaderFor(CompletionInterceptor.java:576)
     at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.getClassLoaderFor(BasicMBeanServerInterceptor.java:438)
     at com.sap.jmx.provider.ProviderInterceptor.getClassLoaderFor(ProviderInterceptor.java:330)
     at com.sap.engine.services.jmx.RedirectInterceptor.getClassLoaderFor(RedirectInterceptor.java:501)
     at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getClassLoaderFor(MBeanServerInterceptorChain.java:443)
     at com.sap.engine.services.jmx.RequestMessage.readParams(RequestMessage.java:525)
     ... 8 more

Runtime error when loading crystal report

Hi All,
I am new to crystal report with java. However i have developed report with java on eclips 3.4.2 and its loading successfully. Then i create a jar file and run it. then it will give error massage as shown below.
"Exception in thread "Command" java.lang.NoSuchMethodError: com.businessobjects.crystalreports.viewer.applet.ViewerUI.clearMessage()V
at com.businessobjects.crystalreports.viewer.applet.h.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)"
I have set "ReportViewer.jar";; file as bottom one of the jar list also, but problem is still there
Please help me to solve this problem
Thanks & Best Regards,
Gamika

Please re-post if this is still an issue to the Java Development - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with your directly

Runtime error at loading cwimaqkernel in bcb4

run time error occurred at CWIMAQKernel loading, complie and linking passed.
Borland C++ Builder 4.0
code lists are as follows:
void __fastcall TImageForm::Button1Click(TObject *Sender)
_CWIMAQKernelDisp Kernel;
CWIMAQVision1->ReadImage(CWIMAQViewer1->Image,WideString(PicturesFileName.c_str())); // ok
Kernel.LoadKernel(cwimaqKernelLaplacian,3,5);
/// ----------------run time error occurred at above line.
CWIMAQVision1->Convolute(CWIMAQViewer1->Image,CWIMAQViewer1->Image,cwimaqBorderClear,Kernel);//ok

Hello,
There is a KnowledgeBase on ni.com which addresses this issue:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/862567530005f09c8625674a004d9845?OpenDocument
Regards
Russell Blake
Applications Engineering
National Instruments
Engineering Team Leader
G Systems, www.gsystems.com
Certified LabVIEW Architect
Certified Professional Instructor

Every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this?

every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.

Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin

After Upgrade to latest iTunes, it will not open.Uninstall and reinstall did not help Getting this error message '' Runtime Error R6034 '' An application has made an attempt to load the C runtime library incorrectly''. 3 windows PCs.1 vista, 2 windows7 7

I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned. But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, '' '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.'' That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
Jonas.
3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Just did the iTunes update that iTunes said was available now iTunes won't open, keep getting Runtime Error message. R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.

Just did the iTunes update that iTunes said was available, now iTunes won't open. I just keep getting a Runtime Error message.
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
Is anyone else having this problem?
I tried to re-install and got the following message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Does this mean I have now lost everything?

I just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck!

Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?

Hi all,
   We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
   The following is from the Short Dump (ST22):
   The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
The following are from ROIDOCPRMS table:
   MAXSIZE (in KB) : 20,000
   Frequency       : 10
   Max Processes : 3
When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records. I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
How could I fix this problem, PLEASE ??
Thanks,
Venkat.

Hello A.H.P,
The following is the Start Routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
DATA: material(18), plant(4).
DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
/BIC/AZCPR_O0200-CPR_BPARTN.
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
   clear DATA_PACKAGE.
   loop at DATA_PACKAGE.
      select single /BIC/ZMATERIAL PLANT
         into (material, plant)
         from /BIC/AZCPR_O0400
         where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
         and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
       if sy-subrc = 0.
          DATA_PACKAGE-/BIC/ZMATERIAL = material.
          DATA_PACKAGE-plant = plant.
          modify DATA_PACKAGE.
          commit work.
       endif.
       select single CPR_ROLE into (role_assignment)
                     from /BIC/AZCPR_O0100
                     where CPR_GUID = DATA_PACKAGE-CPR_GUID.
        if sy-subrc = 0.
          select single CPR_BPARTN into (resource)
                     from /BIC/AZCPR_O0200
                     where CPR_ROLE = role_assignment
                     and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
               if sy-subrc = 0.
                  DATA_PACKAGE-CPR_ROLE = role_assignment.
                  DATA_PACKAGE-/BIC/ZRESOURCE = resource.
                  modify DATA_PACKAGE.
                  commit work.
               endif.
          endif.
       clear DATA_PACKAGE.
       endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
Thanks,
Venkat.

I attempted to perform the itunes update on two different PCs and itunes will no longer open and I received a message to reinstall itunes. The reinstall did not work and I now receive a Runtime error message (R6034) re: library loading incorrectly. Help?

I attempted to perform the itunes update on two different PCs. Itunes will no longer open and prompted me to reinstall itunes. The reinstall did not work after several attempts and I received an error: "Runtime error R6034. An application has made an attempt to load the C Runtime library incorrectly. Please contact the application's support team for more information." Has anyone else had this issue? How can I resolve it?

I've been having the same exact problem this morning, and from the looks of it a lot of other people are posting about this issue, so I don't know if it's maybe something wrong with the download but I'm just relieved that it seems to be that instead of a corruption issue with my windows installation. I'm just wondering how long this will take to be resolved.

When updating my ipod as prompted I now get error on my laptop --Runtime Error Prog:C:\Prog Files\iTunes.exe R6034. An application has made an attempt to load the c Runtime Library incorrectly.Please contact applicant support.

When updating my ipod I as prompted got message on my laptop----Runtime Error Prog: C:\Prog Files\iTunes.exe R6034 An applicationhas made an attempt to load the C Runtime Library incorrectly. Please contact support. Error 7(Windowserror 1114)

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99833)

Runtime Error on loading captivate 5

Similar Messages

Maybe you are looking for