Runtime error on Satellite L650

I have just bought a L650-1GC. I have a software problem. It will not run adobe reader. It opens but then comes up with a runtime error and closes. This means I cannot access the user manual.
It will also not run the installed starter edition of microsoft office 2010.
Any suggestion as to what the problem is, and how to solve it?
Many thanks,
Malcolm

It is really strange. Adobe reader is preinstalled with recovery image and there should not be any problem.
Do you use original preinstalled OS you got with your notebook?
Have you installed some software that can have negative influence on this?
What you can try is to install recovery image again and test it with factory settings. After doing this you will have both software again and you can test functionality.

Similar Messages

Disk read error on Satellite L650

My Toshiba Satellite L650 will not start up.
When I switch it on, TOSHIBA is display follow by disk read error, press ctrl+alt+del to restart.
I did that and the same thing happens again. So far only F2 and F12 works , tried F8, it gives a loud continous beep then back to the same message.
Can anyone help?
Any suggestion would be deeply appreciated!
Thanks in advanced!
Cheers!

Hi
What HDD status is visible in BIOS?
Is HDD recognized in BIOS? You will need to check the first BIOS page.
Usually you should see the HDD and the HDD name.
If the HDD isnt listed, then probably its faulty and needs to be replaced.
Waiting for feedback!

Satellite L650-1PE - Error messages in Toshiba bulletin board

I got error messages when i try to use Toshiba bulletin board, so firstly I got error 3 and then i press ok and i got error 23 which i don't know why? By the way, my laptop Satellite L650-1PE.
Also I uninstalled it and reinstall the latest version again but I got the same error messages. Please anyone can help me about it.
Thanks in advance.

Hi
Error code 23 is not specific to a Toshiba Bulleting Board software.
This error is generated by Windows OS and the reason for this could be:
Windows Registry Damage or Corruption
Device Driver Conflicts
Hardware Malfunction
Virus or Spyware Infection
Software File Damage or Corruption
So as you see, its really difficult to say what cause this
You can uninstall this software, could clean the registry using CCleaner and then you could try to reinstall this software once again if the new installation does not help, then I would recommend checking new OS installation but I think its really annoying to reinstall the Toshiba image only to get this software working again but its your decision

Satellite L650 PXE-E63:error while initializing the NIC - Start Up Error

I have a Satellite L650 which is 2 month old.
The motherboard makes a ticking noise (I think that is what is making the noise), and when this noise takes place it causes the computer to be very slow!! It has been this way since I pretty much got it.
Today, the computer made the noise, my itunes music started skipping (it was the only program running) and the computer froze, and told me it couldnt find windows. When I restart my computer it runs the windows 7 startup repair, finds nothing wrong, and restarts the computer. When the computer restarts, the screen stays black for a very long time....then it flashes a blue screen (the flash is so quick I have no idea what it says) and asks if I would like to run the repair again. I select no, start windows normally....and the screen goes black for a very long time, however their is no ticking noise, but it appears nothing is happening.
If I force a restart, I get an error message saying along the lines of;
For Atheros PCIE Ethernet Controller... check cable connection
PXE-E63:error while initializing the NIC
PXE-MOF:exiting intel PXE ROM
No bootable device-insert boot disk and press eny key
PLEASE HELP!!!!!!!!

hi,
> The motherboard makes a ticking noise (I think that is what is making the noise), and when this noise takes place it causes the computer to be very slow!
the hard drive may do a clicking sound and also pxe error message can appear if hdd stop working. You can read it here:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=8
what if you enter bios (f2 on startup) and check if hdd listed there. but anyway, you shouldn't be worry :) your lap is still new and under warranty. So, it will be fixed for free.

Toshiba Satellite L650-07U, Hard disk failure and replacement

Hi all,
I have Toshiba Satellite L650-07U Laptop, Model: PSK1EC-0700Q with 4GB RAM, 650GB HD, Windows 7 Home Premium installed. At the time of first use, i made Recovery DVDs which took 4 blank DVDs using Recovery media creator.
From 2 weeks it is giving problem, at start its slowdown with every application, then suddenly it started Hard disk failure error and ask to backup important files. From that instant i did all my backup save in another portable Hard drive.
I had hiren boot CD, and ran RAM test and found it OK, and then run Hard Disk test and found few bad sectors at few certain point, As 650GB Hard disk was taking alot time of time for checking bad sectors, so i stopped that application.
First I tried Recovery DVDs to restore Windows, but it failed as Laptop DVD-Writer was unable to boot from those created DVDs (DVDs are OK as had checked it on Desktop computer DVD-ROM), Laptop DVD-Writer is also working as I test few more bootable CDs and it booted perfectly, but it is not booting from Recovery DVDs.
Than i tried to restore from Recovery partition using Factory restore settings, it erases all data and reinstall new and fresh copy of Windows 7 Home Premium. It works fine for few hours than again pops up Hard Disk Failure message again and again. I searched here in Toshiba Forum and have found similar problem with other members and finally decided that it need to replace Hard Disk with new one. As It is now two and a half month old, thats why i need to buy new Hard Disk for my Laptop.
I checked all partitions of drive using Hiren Boot CD, and had found that there are four default partitions in Toshiba original laptop drive,
One hidden partition of 1.5 GB
One hidden partition of almost 21 GB
One hidden partition of almost 12 GB
One partition of 561 GB, which was the original partition where windows 7 was installed along with all of my Data.
Now I want to replace faulty drive with a new one and have a lot of question in my mind which I need to share with you guys.
At the time of first use I installed Windows 7 64 bit edition, and made Recovery DVDs, and at second time of restore to factory setting I had installed Windows 7 32 bit. I have confusion about recovery DVDs (which is not booting from default DVD-Writer of Laptop), either it has 64 Bit recovery data or 32 bit? Or have both 64 and 32 bit Data.
Toshiba restore to factory setting without using any recovery DVD/USB is the best possible way to restore Windows 7, How can I make same recover hidden partitions from original/faulty hard drives to new hard drive partitions? Is this possible and how?
On Default hard drive there was one partition of 561GB instead of two or more partitions. Is this possible to split partitions in new hard drives instead of one big partition?
As Recovery DVDs are not able to boot from laptop default DVD-Writer, is it possible to open those DVDs on another System and copy tem in USB drive and use it for booting? If it is possible than please show me the steps for making bootable USB from these Recovery DVDs.
Thanks,
masterleous
Solved!
Go to Solution.

Satellite L650-07U (PSK1EC-07U00Q)
This site is for US computers. I doubt you'll get your questions for that Canadian model answered here.
There appear to be two recovery partitions. Maybe one for 32- and one for 64-bit Windows. Or maybe one is for English and the other for French.
Your User's Manual isn't much help either. You probably need to ask Toshiba tech support in Canada.
About all I have to offer is this: Be wary of drives with advanced-format technology. See my message about that.
-Jerry

I attempted to install an update to my iTunes and got a "C Runtime Error" message. Now when I attempt to open iTunes I get a pop up that says to reinstall iTunes. But I can't open iTunes to reinstall it. How can I reinstall iTunes?

I received notification of ANOTHER iTunes update being available, so I attempted to install the update on my Toshiba Satellite laptop running Windows Vista. During the update process, two pop-up announced that I had a "Microsoft Visual C++ Runtime Library" Runtime Error, R6034 and another pop-up that states "iTunes" iTunes was not installed correctly. Please reinstall iTunes. However, I cannot open iTunes. I get the same pop-up telling me to reinstall iTunes.
I had many songs in my iTunes library that came from sources other than iTunes, mostly my own CDs. Plus, I have nearly $100 credit remaining in the iTunes store. I'm converned I will lose the songs and store credit if I reinstall iTunes. So my questions are:
1. How can I reinstall iTunes?
2. If I reinstall it, will I lose my store credit and non-iTunes songs?
Thanks,
Jim

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562
JimmieJag wrote:
2. If I reinstall it, will I lose my store credit and non-iTunes songs?
Nothing should be lost... However... it is both Prudent and Recommended that a backup should have been created and maintained.

Satellite L650-170 (PSK1JE) Setup Failure

Today i purchased a toshiba Satellite L650-170 (PSK1JE), i turned it on, and yay, I had to sit through a 2 hour long setup.
After 2 hours, it restarted for the 10+th time, and this time, instead of succesfully installing one of the 42 things it had to install,
it didnt start up, the only thing that was on the screen was a loading bar, with the text above saying it was starting the services
It did not do anything, i could just leave it there for an hour, "starting services"
So i tried to repair it, started it up, F8, and guess what, there was no Repair Computer option(wich should be there!),
all the other options were available, such as safe mode, so i tried safe mode
Even in safe mode the loading bar popped up, starting the services, and it crashed there.
I tried to recover it with a windows 7 recovery disk (wich i had to download and burn myself on another laptop..!)
Even with a recovery disk, it only gave me errors, it was unable to start the recovery
So yeah, now were about 6 hours later, ive successfully installed a trial of a different version of windows 7 on it,
Now all i have to do is download about 30 drivers from your website, and install them one by one, and restart the computer 30 times
I installed the webcam driver, restarted like it told me to, and i got a message that it was missing a dll file.
Do you have a disk available for download that contains the regular windows 7 home premium setup? with all the proper drivers?
Because mine was bugged obviously. Im not going to download 30 drivers that will not work on the current win 7 i have installed on it.
Regards,
Philipp.
null

> Do you have a disk available for download that contains the regular windows 7 home premium setup? With all the proper drivers?
Because mine was bugged obviously. Im not going to download 30 drivers that will not work on the current win 7 i have installed on it.
Recovery disk is not downloadable
First of all the notebook should contain HDD recovery option which could be started pressing F8 -> Repair my Computer -> HDD recovery.
Its strange that you didnt find this option
Here is documentation how to start the HDD recovery. But of course this would work only if the HDD was not formatted and OS has not been changed
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=58
However, it seems you have formatted the HDD using other Windows OS.
If you want to get recovery disk then you can purchase this from here:
https://backupmedia.toshiba.eu/landing.aspx

Satellite L650-11R - not able to connect to public networks

Hello there.
Although I am very pleased with my laptop, I have one problem. I am not able to connect to public networks using ethernet cable at some location (not everywhere) Users with different laptops have no problem connecting to the same networks that I cannot, so I'm guessing the problem is my laptop.
I always get "unidentified network" error. I tried replacing the cable but the problem still remains.
Any suggestions?

Hi everybody, I have the same problem which happened with united & for the same product Satellite L650-1HR & also using default Toshiba OS, Windows 7 home premium.
from my home I can't connect to internet & always get "unidentified network" error also I tried replacing the cable but the problem still remains. only at my home & the same cable working properly with any other Laptop without any problem, outside home internet working properly without any problem.
I tried all ways, turned off firewall & the DHCP is already enabled, but I'm getting message telling that " the local aria connection does not have a veiled IP configuration"
So what do you think?

Runtime error-FlashCards\TCrdMain.exe

I received this error message on my Toshiba Satellite laptop (Model A205 55814) and do not know what action to take: Runtime Error!Program: C\Program Files\Toshiba\FlashCards\TCrdMain.exeR6025- pure virtual function call Can anyone offer assistance?Thank youLouise

Satellite A205-S5814
Downloads are here.
Louise, try reinstalling the TVAP.
Toshiba Value Added Package for Windows Vista/7 (32)

Recovery issue on Satellite L650-12n

I have Satellite L650-12n. I bought recovery disks off this website to install on my Crucial CT256MX100SSD1. Installation appears to work but then after restarting computer this message pops up,
"windows could not complete the installation. to install windows on this computer restart the installation."
and sometimes this:
"windows setup could not configure windows to run on this computer's hardware"
I have tried twice and the same thing happened.
I looked in BIOS and the SSD is recognised. I have tried resetting to defaults but nothing seems to work.
Any help getting past this problem before I bin the lot would be much appreciated!

I have started all over for the 3rd time. It has done the same thing - it gets to 100% on WIndows Setup and then error message comes up. The first time it says "windows setup could not configure windows to run on this computer's hardware"
After hitting OK it restarts itself and every subsequent restart it says "windows could not complete the installation. to install windows on this computer restart the installation."
I have found somewhat of a work around this error on another website.
At the first error hit SHIFT F10
Type -
Cd..
Cd..
Cd c:\windows\system32\oobe
Msoobe
This should force the installation to continue
I don't really understand how it works but it while it forces the installation it seems to skip some essential things which make the installation unsuccessful later down the line.

Can't restore HDD on my Satellite L650-18M

Satellite L650 frozen at boot up. despite mc fee, a virus has stopped boot up. Stops at flashing cursor top left. can boot from recovery cd. BUT restore / recovery wont complete to any selected restore point though it goes through all the motions and then says at end, cant complete with error.
No toshiba hdd recovery option (ie to factory settings) is available in recovery console, or with recovery disk.
D Drive has all the recovery data ok as I can move aroud from c> prompt in dos to alldrives/ areas. Dont have own burned recovery disks. This happened quick .
NOW installed win 7 (64bit) in frustration from 'a' disk, works but all installed s/wareand toshiba drivers now useless . Bottom line, is there a patch to install or a work around that will allow access to reset to the factory settings with the data stored on disk/drive D. Normal methods of starting this process are not available

Can you please tell us which error was shown at the end of recovery installation?
Anyway, now after OS installation with non-Toshiba disc there is no way to start HDD recovery installation again and recovery image can be installed with Toshiba recovery DVD only.
> NOW installed win 7 (64bit) in frustration from 'a' disk, works but all installed s/wareand toshiba drivers now useless
To be honest your posting is a little bit confusing and I dont understand what you want to say with this sentence. If you have installed clean OS you must install all drivers and Toshiba stuff additionally. All of them are available on Toshiba download page.
If you have more questions please be clear and ask one by one so it will be easier to give answer to each of them.

OpenGL Support for Satellite L650

Is there an OpenGL Intel HD Graphics driver for the Satellite L650?

I've checked latest driver information on Toshiba support and this shows driver version 8.15.10.2086 as the latest, however with it already installed in the L650 I get this error when trying to run Minecraft.
+Bad video card drivers!+
+Minecraft was unable to start because it failed to find an accelerated OpenGL mode.+
+This can usually be fixed by updating the video card drivers.+
BEGIN ERROR REPORT 7fe0271 +Generated 09/03/12 18:11+
+Minecraft: Minecraft 1.2.3+
+OS: Windows 7 (x86) version 6.1+
+Java: 1.6.0_17, Sun Microsystems Inc.+
+VM: Java HotSpot(TM) Client VM (mixed mode), Sun Microsystems Inc.+
+LWJGL: 2.4.2+
+failed to get system properties (java.lang.NullPointerException)+
+org.lwjgl.LWJGLException: Pixel format not accelerated+
+ at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelForma t(Native Method)+
+ at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat (WindowsPeerInfo.java:52)+
+ at org.lwjgl.opengl.WindowsDisplay.createWindow(Windo wsDisplay.java:185)+
+ at org.lwjgl.opengl.Display.createWindow(Display.java :311)+
+ at org.lwjgl.opengl.Display.create(Display.java:856)+
+ at org.lwjgl.opengl.Display.create(Display.java:784)+
+ at org.lwjgl.opengl.Display.create(Display.java:765)+
+ at net.minecraft.client.Minecraft.a(SourceFile:230)+
+ at net.minecraft.client.Minecraft.run(SourceFile:650) +
+ at java.lang.Thread.run(Unknown Source)+
END ERROR REPORT 275ab470

My Satellite L650 sometimes hang sometimes

Hello,
My Satellite L650 sometimes hang sometimes, most of time it happens when im gaming, the sounds "hangs" it makes wierd sounds when it does and also my video graphics are laggy. Never had it on any other pc/laptop before :S
How can I fix this?
Greetings,
Arnie

Hi buddy,
Can you post a little bit more details? Also some information about operating system would be nice, nobody knows what you use. Do you use a Linux distribution?
If you play games I would recommend high performance power plan as as*** already wrote. It offers best option and performance for games and other high CPU usage programs.
Furthermore keep your system clean: uninstall programs that you dont need and disable start up programs that you dont need. This can improve the performance a lot!
But you must understand its very hard to say something about sometimes errors.

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Runtime error on Satellite L650

Similar Messages

Maybe you are looking for