Runtime Error Project/WBS Element

Hello,
I am getting a Runtime error (statement message 'E') every time i search in the match code for either a Project or a WBS Element, regardless of what transaction they appear in.
Can anyone help me with this?
Stephen

Did you make any changes to the project coding masks? This error could happen as result in changes to the mask. Project numbers which were valid as per earlier masks may not be fit as per new masks.
If above is a reason implement the note 453280 - Conflicting coding mask and project/WBS element
Regards
Sreenivas

Similar Messages

  • Runtime error in Premiere elements?

    runtime error in premiere elements

    uvagreg11
    You will need to supply a lot more information than just "runtime error in premiere elements" in order for us to help you.
    1. What version of Premiere Elements are you using and on what computer operating system is it running?
    2. What are you using a the project preset for your project? And, what are the properties of the source media that are being used on the Timeline?
    3. Is this a "it worked before but now" or "it never worked before" type of problem?
    4. What is the description of your computer and its resources?
    5. What troubleshooting have you done so far...
    a. flushing preferences
    b. deactivation, uninstall, reinstall
    c. other
    The following is an Adobe document on run time error troubleshooting.
    http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
    Let us start here and then decide what next based on your details.
    Thanks.
    ATR
    Add On..I did not see SG's post until after I had posted mine.

  • Message error Item wbs element budget exceeded

    Hi
    when I do a purchase requisition imputed to WBS element, WBS element consuming, but when I'm going to make the budget document of the reserve (R) in a transaction FMX1 jumps me an error message:wbs element budget exceeded ,it is trying to consumed WBS element , when it has consumed in the purchase requisition.
    I have solved it error with limits tolerance but in the funds commitments consumed other time , we see these results  in the report S_ALR_8713558.
    Where is the problem????
    Than you

    You have to differentiate the beaviour of the availability control in customizing for PS > Costs > Budget > Define tolerance limit
    With the "transaction group" you can differentiate for:
    ++     All activity groups
    00     Purchase requisition
    01     Purchase order
    07     Funds reservation
    Ciao
    Giorgio

  • Problem opening Project/WBS Elements in CJ03

    Hi Experts,
    I have created an interface which posts PROJECT01 Idocs into SAP 6.0. Idocs are posted successfully and I can see Projects/WBS elements in tables PROJ and PRPS.
    However, when I try to open a project/wbs through transaction CJ03, it throws short dump mentioning memory overflow. I checked by debugging CJ03 and found that the code is going into infinite loop.
    Could anyone help me understand why this kind of problem is coming? What is the reason the code is going into infinite loop? If the project/wbs structure is not getting created properly, how can I check that?
    Thanks in advance.
    Netrey

    The issue is resolved. The structure coming throug Idoc itself was incorrect.

  • Problem in MRP run with Project/WBS Element

    Dear PP Gurus,
    I want to run MRP thro Project/WBS Element.
    I have created WBS Element & WBS BOM for Material. Then created sales order for that material and assign WBS element to sales order.
    Maintain Planning Strategy 21 ( Make to Order/Project) for Main Mtl.
    Now when I run MRP with MD51 then no requriements are generated for main material and its components.
    Is there any thing missing from PS-PP & SD point of view?
    Pl guide me for the same.
    Thanks in Advance.
    Umesh

    Dear Nagrajan,
    Thanks for your reply.
    There is no safety stock & un-restricted stock of that material.
    Also I don't want to assign this mtl to that wbs Network. If I assign the Material to WBS network then network req.is generated and thro Normal MD02 MRP generates the requirements.
    & in the plan order it will not show WBS Element
    But My req. is I want to run MRP with  MD51 & want WBS element as account asignment tab in plan order & production order too.
    IS there any config. missing from PP/ PS / SD ?
    Pl guide me for the same.
    Thanks ,
    Umesh

  • Assign Project / WBS Element in Notification

    Hi,
    I have one specific requirement from my client that, the Project / WBS element number (created under PS Module) whould be used as reference object in same way as that when Purchase Order & Material document is refered.
    How can I achieve this?
    Regards,
    Prashant

    Hi  Prashant,
    I don't think there is a standard solution for this. You need to develop the solution with the help of Abaper.
    Regards
    Srini

  • Runtime error on Project/WBS element release

    Hi All,
    I am trying to release a WBS element, however the system hangs and eventually causes a runtime error. How do I rectify this?
    Thanks in advance.
    Regards,
    PS_PS01

    Hi,
    I have done that already. This problem is 4 days old. Everyday I log off, then log in.
    The error meassage reads: "time limit exceeded. The program "SAPLCJDW" has exceeded the maximum permitted runtime without interruption and has therefore been terminated."
    Is there perhaps a note I can apply to correct this?

  • Projects/WBS elements with identification "A" exist

    Hi Experts,
    While attempting change of project ID key length in OPSK, the following error experienced,
    Please suggest the steps to change the length from 1 to 3.
    The details error message:
    Message no. CS084
    Diagnosis: The key can only be extended, if there are no project definitions or WBS elements that are only identified with their external number by the key of the project editing mask.
    Example: Project editing mask 'EB-XXX-000'. The key cannot be extended if the external number is only 'EB'.
    Procedure: You can only change this by changing the external number.
    Regards
    ramSiva

    I agree with Gokul.
    First you will have to archive all the projects with the existing key for coding that you want to change. Then lock the existing mask (or delete it). You cannot create a new mask with a longer key till you do this. You will then have to change the length of the key from 1 to 3 for project coding.
    Hope this helps.
    Regards,
    Ajinkya

  • Projects/WBS elements with the editing mask A still exist.

    Hi All,
    I am trying to create a New Coding Mask with Project ID "A" in Dev client 100. ( Ex: A.0000.XX)
    But System is giving an error says that"There are still projects or WBS elements with edit mask A in the system. Therefore you cannot change them".
    But there is no WBS or PD's with this coding mask existing in development client 100.What to do?Is there anyone faced this problam earlier?Any refresh activity required for this?
    Thanks in Advance!
    Thanks
    Suresh Kumar.

    Hello,
    You need to check whether there are any projects in the system starting with "A" using CNS41.  If at all there are any project existing in the system which starts with "A" then the system wont allow to create coding mask which starts with "A"
    You can try to delete these project if possible and then try out if the system allows you to create the coding mask.
    Thanks and Regards,
    Anish

  • Error in WBS element while doing the purchase requisition

    Dear All,
    While doing the purchase requisition in ps
    the error is : Item 010 WBS element IN05-PR09-16 . 04 budget exceeded.
    Kindly parovide any solution.
    Best Regards,
    Venkat.

    Hi Venkar,
    Check the available budget against WBSE - IN05-PR09-16 . 04 (S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned ), and the PR amount. Available Budget should be more than PR amount. Based on the tolerance limits set for the  budget profile, maintain the Current Budget with budget updates and try to create a PR accordingly.
    Hope this solves your problem !!
    Br
    Hari.
    Edited by: Hari Krishna Kudaravalli on Aug 20, 2009 3:25 PM

  • Automatic creation of PS-project, WBS-elements in wrong sequence

    We have been able to build up a system where PS-project is automatically created once the cProject project is released. The PS project is successfully created and the WBS-elements correspond to the phases in cProjects project as wanted. However, the sequence of the WBS-elements is the other way round as the  sequence of the phase in cProject project. Is there an IMG node where we can define the sequence?
    We are using SAP RPM 4.5 (CPR Xrpm 450_700: Support package 0009)
    Any help appreciated

    Hi Antti,
    I may need some help from you.
    1. May I know how you are creating the PS project Automatically? based on Standard accounting integration.
    2. Are you creating the PD,WBS, Activity,Activity Elements etc in PS by mapping the PD,Phase, Task and Subtask of cProejcts?
    My client have a requirement to create the PS proejct in R/3 . Appreciate your immeadiate help.
    Thanks in Advance.
    psconsultant

  • Why do I keep getting a runtime error in Photoshop Elements 6.0?

    I have had Photoshop Elements 6.0 for several years now with no issues at all.  Recently my computer crashed and I bought a new ASUS touchscreen laptop (Q301L model).  I have tried, with no luck, to get Photoshop to work. After a few actions, it will come up with a window that says "Could not complete your request because of a program error" and occasionally it will come up with a "Runtime Error!" notification that says "This application has requested the Runtime to terminate it in an unusual way.  Please contact the application's support team for more information."
    I have searched all the existing forums on this subject and none of the solutions presented have worked.  I have tried: re-installation (5 times now), running as an administrator, deleting the MediaDatabase.db3 file, renaming the MediaDatabase.db3 file to MediaDatabase.old and allowing to rebuild, repairing with the installation disk, troubleshooting and running in compatibility mode, holding down Ctrl+Alt+Shift as Editor opens and then deleting preferences, allowing Photoshop through my firewall.  I am out of ideas and I really need this program to work.  Please help!

    It might be a bug in the new version of Adobe Reader.  http://support.microsoft.com/default.aspx?scid=kb;en-us;125749
    Looking at my system, the path for AcroRd32.exe for Adobe Reader 9.1 is C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe.  I don't know if you mistyped your path, but you do not have \Reader\ in it.  If you mouse over the file AcroRd32.exe, it should show you version 9.1.
    Did you uninstall the previous version before installing the latest version?  That is the recommended way to do it.  I filled out my Federal Tax forms with Adobe Reader 9.1 without a problem.  This is on Windows XP SP3, fully updated.

  • Change of Project & WBS Element Definition

    Hi,
    Could you please let me know is there any function module to change the Project Definition ,WBS element Definition for an already existing Project and WBS element.
    Regards,
    Hemu Saini.

    BAPI_BUS2054_CHANGE_MULTI      for WBS
    BAPI_BUS2001_CHANGE                  for Project
    Regards,
    Chandra

  • Project WBS element cost allocation

    Dear All,
    In a project we have created 10 WBS elements out of which one is used for common expenses and rest other or individual works carried out in the project. Now i want to allocate the Common cost of one WBS element to other nine WBS elements.
    Can anybody explain how this can be done and is there any possibilites of costing gets doubled in the project if the cost transffered to other WBS elements.
    Thanks and regards

    Thanks for the reply,
    I have another query also, i had transferred the WBS element cost to other WBS element cost in the same Project.Whether it will double the Revenue or Cost incurred
    For ex, WBS Element A got 100 and i had settled to WBS Elements B and C , now B and C got 50 50 each
    now my project will have
    a) WBS Elements A-100, B-50 and C-50   or
    b) WBS Elements A-0, B-50 and C-50 ,  for my understanding option (b) will be right. Your views pls
    Edited by: aspirefico on Apr 30, 2009 12:59 PM

  • Runtime error for ui element multipane

    hello.
    i have a question.
    i implemented uielement multipane example in wda.
    it worked very well in only first trying, but it occured a runtime error -that is Access via 'NULL' object reference not possible.- from second trying.
    context -
    hd                               <node>
    attribute1            <hd of attribute>
    attribute2            <hd of attribute>         
    item                    <hd of subnode>
    attribute1 <item of attribute>
    attribute2 <item of attribute>
    below is source.
    ==========================================================
      DATA: node_hd        type ref to if_wd_context_node,
                 node_item     type ref to if_wd_context_node,
                 itab_hd        type wd_this->elements_hd,
                 stru_hd        type wd_this->element_hd,
                 itab_item      type wd_this->elements_item,
                 rt_auart type ref to data,
                 rt_vbeln type ref to data.
      field-symbols: <fs_auart> type table,
                           <fs_vbeln> type table.
    retrieve the data from the select option
      rt_auart = wd_this->m_handler->get_range_table_of_sel_field( i_id = 'AUART' ).
    assign it to a field symbol
      assign rt_auart->* to <fs_auart>.
    retrieve the data from the select option
      rt_vbeln = wd_this->m_handler->get_range_table_of_sel_field( i_id = 'VBELN' ).
    assign it to a field symbol
      assign rt_vbeln->* to <fs_vbeln>.
    retrieve that data from the database.
    Normally it is suggested to encapsulate the data retrieval in a separate class.
    For simplicity, the select statement has been implemented here.
      select * into corresponding fields of table itab_hd
      from vbak
      where vbeln in <fs_vbeln>
      and auart in <fs_auart>.
    bind the data to the context
      node_hd = wd_context->get_child_node( name = 'HD' ).
      node_hd->bind_table( itab_hd ).
    bind the data to the context  
      loop at itab_hd into stru_hd.
    retrieve item_node object each sy-tabix
    i could't get item_node object when sy-tabix is 1.
    i hope to know why i can't get item_node object when sy-tabix is 1.  
          node_hd->get_child_node(
            exporting
              index = sy-tabix
              name = 'ITEM'
            receiving
              child_node = node_item ).
          when index = 1
          node_item object is null.
          why node_item object is null?????
          i don't got it.
          can sombody explain about it???
          because of this matter, i can't acess frist node_item to insert value.
          do you have a solving this matter? 
            select * into corresponding fields of table itab_item
            from vbap
            where vbeln = stru_hd-vbeln.
            node_item->bind_table( itab_item ).
      endloop.

    Hi Regina.
    So you say if it is not declared as singleton it is created for each element. But
    when I declare my subnode with cardinality 0..1 I face the same problem.
    This is what I do:
    I bind the elements to the parent node. Afterwards I loop all elements of the parent
    node and try to get the subnode with element->get_child_node( ). If cardinality of
    the sub node is 0..1 or 0..n the reference is NULL. If cardinality is 1..1 or 1..n the
    reference is not initial.
    At what step does the frameowrk create the subnode then?
    Cheers,
    Sascha

Maybe you are looking for