Runtime Error R6025 and DAQ-Driver

Operating System Windows2000
Teststand  Version 3.0
DAQ-Driver  6.9.3f5
Serial Driver  1.7
LabvIEW RTE build with LabVIEW 6.1
hello,
we have build a testsytem based on LabVIEW and Teststand.
We use the NI-PCI boards 6713, RS232/16 and MIO-164E. We dont use any operator interface, only the
original Teststand sequence-Editor and the Single-Pass Prozess-model.
It works very fine for e.g. a whole week running and then
,suddenly, the ERROR Window pops up :
"Window-Head: Microsoft Visual c++ Runtime Library
RUNTIME ERROR
Programm ...\National Instruments\Teststand3.0\Bin\SeqEdit.exe
R6025
- pure virtual function call"
After pressing the OK-Button, the Computer will boot and generate a memory-dump.
We have analyzed the dump-file with the Microsoft WINdbg Tool.
The Bugcheck Analysis reported an error with the Nidaq32k-Driver !!
What should/can we do ?
See below the analysis report:
Debugging Details:
*** ERROR: Symbol file could not be found. Defaulted to export symbols for Nidaq32k.SYS -
OVERLAPPED_MODULE: kmixer
FAULTING_IP:
Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
bc4370a0 c745fcffffffff   mov     dword ptr [ebp-0x4],0xffffffff
DEFAULT_BUCKET_ID: INTEL_CPU_MICROCODE_ZERO
BUGCHECK_STR: 0xCB
LAST_CONTROL_TRANSFER: from 804bce30 to 80440665
STACK_TEXT:
bc175c54 804bce30 80064bd4 00000000 804bd199 nt!MmCleanProcessAddressSpace+0x421
bc175d04 804bd1b3 00000000 84973a28 80431261 nt!PspExitThread+0x4e1
bc175d10 80431261 84973a28 bc175d48 bc175d3c nt!PsExitSpecialApc+0x1a
bc175d4c 80465bfa 00000001 00000000 bc175d64 nt!KiDeliverApc+0x158
bc175d4c 77e017da 00000001 00000000 bc175d64 nt!KiServiceExit+0x58
WARNING: Frame IP not in any known module. Following frames may be wrong.
0012f7a4 00000000 00000000 00000000 00000000 0x77e017da
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
bc4370a0 c745fcffffffff   mov     dword ptr [ebp-0x4],0xffffffff
FOLLOWUP_NAME: MachineOwner
SYMBOL_NAME: Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
MODULE_NAME: Nidaq32k
IMAGE_NAME: Nidaq32k.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 3f39592e
FAILURE_BUCKET_ID: 0xCB_Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
BUCKET_ID: 0xCB_Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
Followup: MachineOwner

hello,
unfortunately the msiBlast tool dont indicate the LV RTE 6.0 !, too.
See attachment .pdf file for all installed applications
So it seems to be a other problem of the MAX Version 3.0, showing a LV RTE, which does not exists.
(The expected folder ...\shared\LabVIEW Run-time\6.0 is not present, too.)
Nevertheless i dont have any idea to solve the problem with the R6025 Error ?
Note: In case of manually killing the LV TS RTE within the windows system control (testsequence is running) , a blue screen with error indication for nidaq32k.sys arises !?
regards
Attachments:
msiblast-all.pdf ‏18 KB

Similar Messages

TS1368 I keep getting runtime error r6025 when searching itunes store

I have tried reinstalling latest download but just get runtime error r6025 and itunes then shuts down

Hi i had that too, dont know why. all i did to fix it was go into control panel, then uninstall programs, then found Itunes on the list. i clicked to uninstall and it then gives you a choice, to uninstall or to change, or to repair. i chose repair and it fired up itunes and repaired it, that was that and it works fine now, try it, good luck.

I try to search in itunes store and keep getting a runtime error R6025 - help!

I keep trying to search for music in the itunes store and I get runtime error R6025 then itunes shuts down. Help!

Link for the previous fix:
http://support.apple.com/kb/HT2292
Just an update that I did get the error once after the fix but now seems to have gone away completely. All I did after the error recurred was to add a new desktop shortcut and run as administrator. I then deleted the shortcut and went back to my usual quick access icon in the taskbar.
Hope this helps.

I downloaded latest update of iTunes (windows 7, 64bit) and have now the problem runtime error R6025 pure virtual function call (Microsoft Visual C runtime library) - Who would have a solution to that problem? Thanks *********

I downloaded latest update of iTunes (windows 7, 64bit) and have now the problem runtime error R6025 pure virtual function call (Microsoft Visual C runtime library) - Who would have a solution to that problem?
Thanks from Switzerland
<Edited by Host>

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
(I've asked the hosts to remove your email address)
tt2

ILL-CS2 runtime error R6025

I wrote a script that from time to time produces a "runtime error R6025
- pure virtual function call" for no apparant reason. I've noticed that when I run the script through the debugger this error doesn't occur, but it does when I let it run on it's own. I've also checked online and read what information I could about this C++ error, but I can't seem to solve this issue.
Does anyone have any experience with this runtime error, or has any ideas on how to solve it?

Hi Nate,
Thanks for the tip. I was finally able to write the script I wanted using VBasic, and was also able to write a more simplified version with JScript, without encountering the dreaded R6025 error (although basically the script does exactly the same)...
I will consider trying it using CS3 as well.

TS1717 when searching in Itunes store receive error runtime error r6025

When trying to search for music in Itunes Store i receive "Runtime Error R6025" Windows tries to repair and ends up shutting down Itunes.

I had the same problem since I updated Itunes. I found a solution that worked for me from a previous post from 2007 (when people who updated to Itunes 7 had the same problem). Apparently you need to find which of your current programs is incompatible with itunes. Here's the link:
http://support.apple.com/kb/HT2292
Hope this works for you too.

Getting C++ Runtime Error R6025 trying to open LC form

This is a form I created with LC 8.05/Acrobat Pro 8.1, now on my client's website at http://www.rachc.org/docs/CommonsRR4Form-Guidelines.pdf -- is there something seriously wrong with this version of Live Cycle Designer? Or is it the current crop of Readers or 8.3 Acrobat pro? With IE the website completely freezes, but with Mozilla, just crashes acrobat. What's UP??
MS C++ Runtime Library
Acrobat.exe - Runtime Error
R6025 - Pure Virtual Function Call
Research on this Error shows faulty programing calls in acrobat -- is the latest versions of 8.3 and Reader causing this? If not, What then?
BarryG

i'm new and just trying to get help.

TS1424 Runtime error R6025

Runtime Error: "R6025 -Pure virtual function call
I want to search in the iTunes store and get the Runtime Error: "R6025 -Pure virtual function call. Any idea how I get rid of this error as iTunes crashes all the time now. I work with Windows 7 (64). Uninstalled and reinstalled and still doesn't work.

I fixed this same problem by running iTunes as Administrator

Runtime error R6025 Pure virtual function call....the program shuts down as soon as its opened

iTunes shuts down as soon as it is opened. Message says Runtime error R6025. pure virtual function call. What is this and can it be fixed???

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turing off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Captivate 8 - Runtime Error R6025 - Pure Virtual Function Call

My teammates and I have Captivate 8 installed recently and while working on a big project for a client, some of our files got corrupted. We couldn't open them and we'd get a Runtime Error R6025 - Pure Virtual Function Call. Some members of the team could still open those CP8 files but eventually, everyone got the error and we couldn't open the files anymore, even if they were backed up several times.
Anyone have the same problem? We are suddenly having regrets purchasing all those Captivate 8 licenses. Captivate 6 never gave us this problem and it really had to happen with a big project for a client.

Just responded to this in another thread (note we used Captivate 7 so it might be a different error).
We found that when we created files with embedded swf files that existed ABOVE widgets in the timeline, when someone else tried to open our file it broke/we got the runtime error. The original person could still open it for a time, but eventually the cache would clear and they couldn't.
However, if we ensured swf files are BELOW widgets in the source files, it didn't break. In fact, if we found one that was breaking and got the author to move the swf file on the timeline, it would start working for others.
STRANGE! Let me know if this works for you to!

Windows closes program - get runtime error R6025 c:\virtual pure virtual funcition call

when trying to get into ITUNES i get a runtime error R6025 C:\prgoram files (X86) \:itunes.exe
c:\virtual
pure virtual funcion call
microsoft visal c++ runtime library
OS windows 7 64 bit
it was working 2 weeks ago

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already done the above and things still aren't working, try opening iTunes in safe mode by holding down CTRL+SHIFT as you launch iTunes, then going into Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. If you close iTunes and reopen you may find that it now behaves normally.
tt2

SOLUTION - Photoshop CS5 Runtime Error, R6025, runtime c++

Hello All CS5 Photoshop Users.
You have been getting an error on Photoshop CS5 Runtime Error, R6025 C++ in 64bit
I finally figured the solution for this.
What you have to do is this:
Uninstall all the Runtimes x86 x64 for 2005, 2008, 2010
Uninstall the entire CS5 Photoshop.
Go to your C:\Program Files\Adobe\Adobe Photoshop (64bit)\Plugins\
Delete any 3rd party plugins
Go to C:\Program Files (86)\Adobe\Adobe Photoshop\Plugins\
Delete any 3rd party plugins
Reboot
Re-install CS5 Photoshop, when selecting the installation make sure to install 32bit and 64bit, when you are installing 64bit and you select it will also select 32bit, install the CS5 Photoshop.
Now install the Runtimes from Microsoft x86 x64 for 2005, 2008, 2010
Confirm the size of the runtimes from microsoft with cs5 photoshop runtimes
Location of MS Runtime - C:\Windows\winsxs
Install the plugins and done!!!!!
Hope this helps to all CS5 Photoshop users.

To uninstall the runtimes you can easily do it from registry, best and easy way, this will clear any files which were having conflicts.
Runtime C++ is the error with Visual C++ Runtime.
Go to start > run > type regedit and click OK
In the registry go to:
HKLM > Software > Microsoft > Windows > Current Version > Uninstall
Expand the Uninstall and you will see many folders or Keys with long names like {002D9D5E-29BA-3E6D-9BC4-3D7D6DBC735C} ...click on them one by one, on the right side you will see what application it is. On the right side look for these
Name: DisplayName
Data: Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Name: UninstallString
Data: MsiExec.exe /X{002D9D5E-29BA-3E6D-9BC4-3D7D6DBC735C}
Make sure the name is Microsoft Visual C++..... any version, you will for sure have more than 3-4.
Double click on the UninstallString and copy the Data, go to start > run > and paste , click on OK, and the uninstall will begin.
WARNING - Please make sure you close all the application before proceeding. Go to task manager and kill any process which is not running by system like any third party application including third party WLAN software, or any other, check system tray (bottom right corner before the clock).
Once you have all this done you will not have any problem.
When installing CS5 on 64bit application, make sure to install CS5 32bit as well because of some dll and system files being not fully compatible.
First uninstall the CS5, then uninstall the runtimes, backup your Plugins as folders, you can over write them later without reinstalling them.
OR
Uninstall runtimes, repair CS5 with an option of installing 32bit and 64bit.

TS3297 Runtime error R6025

When trying to open itunes Store, message - Runtime Error R6025 appears & closes i tunes

someone told me about a quick fix until apple addresses the issue. put a shortcut onto your desktop, right click on the shortcut and choose run as administrator. you can search away. it worked for me.

Runtime Error R6025 crash iexplore.exe

Hi all,
I have a problem with my web application. Recently, we have changed the JDK1.4 to JDK 1.5. After the application has upgraded to new JDK. I got error pop up message on the IE saying
Virtual Function Call
Runtime error
R6025.
. I have some applet running on the same page. I don't know what's going on. I try to check the web console. The JVM seems trying to stop an applet. The following is the detail:
basic: Starting applet ...
SnifferXMLParse : start() - begin
ProgressBar : start() - end
basic: Stopping applet ...
ProgressBar : stop() - end
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter@7ee46a
basic: Finding information ...
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@4f2ec, refcount=3
basic: Done ...
basic: Joining applet thread ...
basic: Destroying applet ...
basic: Disposing applet ...
basic: Quiting applet ...
basic: Joined applet thread ...
basic: Unregistered modality listener
basic: Stopping applet ...
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter@749ebc
basic: Finding information ...
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@4f2ec, refcount=2
basic: Done ...
basic: Joining applet thread ...
basic: Destroying applet ...
basic: Disposing applet ...
basic: Quiting applet ...
SnifferXMLParse : stop() - end
basic: Joined applet thread ...
basic: Unregistered modality listener
--> basic: Stopping applet ... (This is the extra stopping applet)
I cannot tell what is going on here. What can I do to avoid the error? Or any idea?

What version of 5.0 are you running? There were some problems new in 5.0 seen mainly with the Java Plug-In and other apps which embed the JVM which were fixed in 5.0u6.

Runtime error R6025 when closing adobe captivate 6 or 7

Everytime I close Captivate on a system running Win 8.1 (did it with previous version of Windows, too), I would get this runtime error R6025 pure virtual function. Any resolujtions to this error would be appreciated.

Hi there,
Welcome to Adobe Community.
This could be because of corrupt preferences.
We could try to recreate the preferences, however it will delete your customizations in the workspace. But we will not completely delete the preferences folder so we can get it back.
In order to recreate the preferences, please do the following.
Save your Project.
Close Captivate
Windows 8: C:\Users\[user name]\AppData (hidden folder)\Local\Adobe\Adobe Captivate 7 folder
Rename the Captivate 7 folder to anything.
Launch Captivate and test your project.
Hope this helps!
Thanks!

Runtime Error R6025 and DAQ-Driver

Similar Messages

Maybe you are looking for