Runtime error r6034 when installing the latest itunes version with XP

I was invited this morning by Itunes to upgrade to the last version. the installation went wrong. needed to stop and to reinstall with the latest version downloaded from itunes.com.
no way I can install it, I have tried many times, always the same message R6034 runtime error

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8, some users may need to follow the process recommended here which includes some additional manual file and folder deletions not mentioned above.
tt2

Similar Messages

  • How to correct Runtime error R6034 when attempting to update iTunes on PC?

    How to correct Runtime error R6034 when attempting to update iTunes on PC?

    Hey ievafromsa,
    Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • How do I fix error 126 in installing the latest itunes update?

    How do I fix windows error 126 in installing the latest itunes update?

    http://support.apple.com/kb/TS3694#error3014

  • While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator

    While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message.  I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly."  I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!

    Solving MSVCR80 issue and Windows iTunes install issues.

  • I installed the latest iTunes version but it didn't worked

    I installed the latest iTunes version to my newly formatted pc(windows) and then connect my iPad but it didn't recognized and didn't worked?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Runtime error r6034 when try to open itunes

    How do I fix runtime error r6034?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Error message when installing the latest version of itunes

    I tried installing the latest version of iTunes and received an error message.  Asked to reinstall, but still doesn't work.  I receive Windows Error 127 and AdiAdID_AcuireMatchSlotIfNecessary error messages.

    Hey AstuteInvestor,
    Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following resource may provide a solution:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • HT1245 I am not presented with the same menu bar as these instructions. There is no 'info' tab. I have installed the latest iTunes version

    I've selected my iPhone from the device list. I've started iTunes but I'm not seeing the Info tab as shown in this knowledge article. What program has the Info tab?

    I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

  • I have just installed the latest iTunes version but now my PC cannot open iTunes. I am using Windows 8.1 64

    I get the message "iTunes was installed incorrectly. Reinstall iTunes. error 7 (windows error 127) And the following message. I have uninstalled ALL Apple software twice but the problem remains. Can anyone help with this?

    problem solved see https://discussions.apple.com/message/24604581?tstart=3#24604581?tstart=3

  • Why do I get the following message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services." when trying to install the latest iTunes version?

    Every time I tried updating iTunes, there was an error. The last time, I was not able to start it up again, so I uninstalled iTunes and tried to install it again, but it just won't work.

    Solving MSVCR80 issue and Windows iTunes install issues.

  • TS2570 I am getting runtime error R6034 when opening iTunes i have followed all instructions on reinstalling and it still occars

    I am getting runtime error R6034 when trying to open iTunes I have followed all instructions for reinstalling iTunes but it still occurs can any help please?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99537)

  • HT1926 I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start.  I verified that I have admin privileges.  Can anyone help?

    I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start.  I verified that I have admin privileges.  Can anyone help?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I am trying to install the latest itunes software to my computer. After installing I keep receiving the error messages. Runtime error. Please help

    Hello
    I am trying to install the latest itunes software to my computer. After installing I keep receiving the error messages. Runtime error.
    Please see the screen capture of the error messages.
    Please help, Thank you
    Ab Majid

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I receive an error message when trying to install the latest Itunes program on my computer using windows 7, 64. I receive the message, "service  apple mobile device fails to start"

    What must I do to install the latest Itunes program using windows 7, 64. The program stops when the service portion is installing and states, "Service Apple mobile division fails to start"

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

  • TS5179 I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update (PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it. #out of space...??)

    I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update, 11.4.62 (on a PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it (Ugh).  First result Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there.  Second result, upon installing iCloud again, I have two iCloud contact files shown in outlook - "iCloud" & iCloud, within iCloud".  1,332 & 1,385 contacts respectively. 
    Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere.  This is NOT fun at 72-yrs old...!!
    So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ

    Interesting response, Kappy  -  Back to original post: "First result: Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there (therefore, initially I had lost my contact file from Outlook).  Second result, upon installing iCloud again, I now have two iCloud contact files shown in Outlook - "iCloud" & iCloud, within iCloud".  W/ 1,332 & 1,385 contacts respectively.  
    Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere.  This is NOT fun at 72-yrs old...!!
    So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ"
    You can safely assume that I have tried using it!   So, to make things a little clearer:
         1)  I now have two iCloud "contacts files", w/ a different total count. What's the difference?  Why the different toatl count?
         2)  Since re-installing the Apple software (part of the MSVCR" recovery instructions) "couldn't possible affected Outlook", why am I getting an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere.  What's in those files? And where are they?
    Probably more important questions get down to:
         3)  Why is a basic Apple product upgrade "screwing-up Outlook"?  This iTunes upgrade, failing to install properly forced Outlook 2007 into a 2-min start-up cycle.  Which was fixed with this "Goat-Rpdeo" of re-installing MSVCR80.dll.
         4)  And under the latest release of iOS-7.0.4 on our iPhones, why is Apple now forcing us to use the iCloud to back-up our contacts, calendars & tasks, vs. allowing these files to be backed-up directly on our PC's via the USB cable?
    Thanks again for your interest and comments.  - Russ-AZ

Maybe you are looking for

  • Why are you not developing for windows phone 8.1 yet?

    I've heard a lot of good things about Microsoft opening up their platforms for developers. I literally used Firefox, Firefox sync, and enjoy Firefox as my default browser. I've seen a few posts saying Mozilla isn't currently developing for Windows Ph

  • How do I stop breaks or stutters in the audio file from occurring while editing?

    I am using Captivate 8 but I saw this same problem in Cap7. My narrator recorded the audio while recording the video. He did not record to each slide independently, but instead allowed the software to break the narration at mouse clicks. As the edito

  • Not clearable : 1 distinct types of ORA- errors have been found in the alert log.

    ( Correct me if I'm wrong.) What could be the reason for the fact that the event "1 distinct types of ORA- errors have been found in the alert log." is not clearable? Even if the problem is solved, the ORA- error will still be in the alert.log. There

  • Counting (interneal timebase)events with only one counter

    Hello, i am using a PXI-6115 card. This card is external clocked with 8 MHz. But I want to measure only about every second. So I divided the external clock with the internal counter 0. This works fine. Now my problem. Now I want to know the external

  • X11 "privileged_start"

    I was wondering what this process is. It appears to be started whenever I run X11 and is run as root. From the name, it sounds kind of fishy to me, and I don't see any documentation about it on the net. Does anyone know anything about it? Also, I'm n