Runtime Error R6034

My Itunes wont open and i get a message which reads as follows:
Runtime Error!
R6034
An Application has made an attempt to load the C Runtime Library incorrectly.
Please can someone assist to resolve this problem.

You can solve your runtime error code by the using of these given steps:
First of all you can reboot your system
Restore your system, by the following steps:
Click start menu and then go to Run.
Type in the box regsvr32 c: windowssystem32msdatgrd.ocx and then click on the OK.
Now you can reboot your system in safe mode.
If you cannot find the specific files on your system, then you can download it form the internet and locate it to the accurate place.
Update your outdated device driver.
Replace faulty or failure hard drive
Hope above steps can fix runtime error code r6034 easily. If they cannot fix your problem then you can use third party repair tool to solve this without any trouble.

Similar Messages

  • After Upgrade to latest iTunes, it will not open.Uninstall and reinstall did not help Getting this error message ''  Runtime Error R6034 '' An application has made an attempt to load the C runtime library incorrectly''. 3 windows PCs.1 vista, 2 windows7 7

        I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned.  But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, ''  '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.''  That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
    Jonas.
    3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • ITunes update shows runtime error R6034/iTunes error 7/Windows error 1114. iTunes tells me to reinstall but I've uninstalled/restalled and get same error messages.

    After iTunes update I see this - Runtime error R6034 "application has made an attempt to load the C runtime library incorrectly".  ThenUninstalled then I also get iTunes was not installed correctly. Please reinstall iTunes error 7 (Windows error 1114).  I've tried fixes for runtime but computer says there are no errors.  I've uninstalled/reinstalled iTunes and get all the above messages.  Now when I start up my computer the runtime error pops up, but once it is closed computer works fine until I try to open iTunes.  I've even tried a system restore going back to November.  I use iTunes for audiobooks on iPod and I'm going to get desperate soon. Any suggestion?

    Follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086

  • I am running Windows Vista 64 bit and i get a runtime error R6034.  How can i fix this and get itunes to work?

    I am running Windows Vista 64 bit and i get a runtime error R6034 when i was updating itunes. How can i update itunes with out getting this error?

    * Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore

  • I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly."

    I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly."  When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 1114".  I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • TS2363 Why do I get a runtime error R6034 message when installing iTunes 11.1.4.62 on my WIn XP (SP3) system?

    iTunes prompted me to download and install the newest version of iTunes (11.1.4.62). I followed all on-screen prompts. iTunes installation gets to the very end, then I get a popup stating that I have a Runtime Error # R6034 "an application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. Okay, I am doing that. FYI, I am runnning Windows XP (SP3). Oh, and BTW, now iTunes is COMPLELETY unusable, and I cannot synch any of my multiple iOS devices. Help please!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Pls help me get itunes back on my computer.  runtime error R6034 and error 7 windows error 1114

    when i updated my itunes i got an error that it couldnt install it and to do it manually which didnt work either so i tried the uninstall and reinstall but i keep getting a runtime error R6034 and error 7 windows error 1114 and it wasnt installed correctly.  pls help so i can get itunes back on my computer.  i use windows vista. thanks so much in advance.

    Hi shannonvc,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • The latest update has resulted in a runtime error (R6034) and I keep being told Microsoft Visual C   Runtime Library is being accessed incorrectly.  Anyone know how to overcome the problem?  I am using a Dell Inspiron  9400 running Vista.

    The latest update to itunes has resulted in a whole series of runtime errors (R6034).  Microsoft Visual C++ Runtime Library states it is being accessed incorrectly.  I am also told that Apple Mobile Device Failed to Start.  Additional messages suggest the error is in itunes.exe and ituneshelper.exe.  I also get Error 7 (Windows error 1114).  Anyone got any ideas how to overcome this (these) problems?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99527)

  • TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

    I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
    However...
    I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
    I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
    The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
    Any help please on this would be appreciated!
    Pete

    See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
    tt2

  • TS3212 I tried to update my iTunes, but I keep getting a runtime error  R6034 Attempt to run C runtime library incorrectly.    I also got an Error 7 (Windows error 1114)

    I tried to update my iTunes, but I keep getting a runtime error R6034 attempt to run C runtime library incorrectly.  I also got an Error 7 (Windows error 1114).  Now my currently iTunes will not open.

    Hey twhitten!
    Here is an article that will help you troubleshoot this issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • Itunes 9.1 for windows causes visual c++ runtime error r6034

    howdy y'all,
    my setup ...
    os = win xp pro, sp3, current patches installed
    itunes = 9.1.0.79
    the original update was thru the apple software updater. after the error showed up on 1st start of itunes, i ...
    = rebooted the system = no fixee
    = uninstalled itunes, rebooted, reinstalled itunes, rebooted = no fixee
    since i updated to 9.1 i get the following errors at itunes startup ...
    [1] visual c++ runtime error r6034
    after i hit ok for item [1] i get ...
    [2] itunes cannot sync information ..SNIP.. because syncing has been disabled on this computer. do you want to enable syncing?
    if you do not enable ..SNIP.. to your ipod.
    after i hit yes for item [2] i get ...
    [3] itunes was unable to load provider data from sync services. reconnect or try again later.
    after i hit ok for item [3] itunes runs.
    the itouch shows up in the left panel "devices" list and is selectable. pressing the sync button on the itouch summary page triggers TWO dialogs of item [1]! hitting ok on them lets the sync go forward. i presume the only actual sync going on is the music. the sync finishes with no errors and says "ipod sync is complete. ok to disconnect."
    i haven't tested to get confirmation that anything is being synced so it might just be going thru the motions.
    item [1] is listed on the ms site here ...
    http://msdn.microsoft.com/en-us/library/ms235560%28VS.80%29.aspx
    it says the error is caused by a missing "manifest" and the fix is to rebuild the app with a proper one.
    links to the 3 error msg screen captures ...
    http://img163.imageshack.us/i/itunes91startuperror01.png/
    http://img6.imageshack.us/i/itunes91startuperror02.png/
    http://img408.imageshack.us/i/itunes91startuperror03.png/
    otherwise, itunes runs in its usual slothful [on windows] and crash-prone [on windows] manner.
    help, please?
    take care,
    lee
    Message was edited by: Lee Dailey
    Message was edited by: Lee Dailey
    Message was edited by: Lee Dailey
    Message was edited by: Lee Dailey

    Hi all,
    I could resolve some of the issues posted here with the fix offered by jeffcoffee under http://discussions.apple.com/thread.jspa?threadID=1595916&start=285&tstart=0 (However, I still have the R6034 error message. Would be great to have a fix for that too).
    This is what he did:
    copy the file 'sqlite3.dll'
    from 'C:\Program Files (x86)\Common Files\Apple\Apple Application Support'
    to 'C:\Program Files (x86)\Common Files\Apple\Mobile Device Support'
    *In a 32 bit Windows OS remove (x86) from the path.
    Another potential dll issue might be: 'libxml2.dll', follow the same copy routine. If the first one does not fix it.

  • I have a runtime error R6034 when i try to log in to itunes so i unistalled itunes prog from my pc and tried to download itunes prog again but no luck still keep getting this error

    I am having major problem. a while ago i downloaded a programm from the internet and there was an error so i uninstalled as i was unable to use it. Since this application, Everytime i log on i get dialogue box opens up Microsoft visual runtime library, Runtime Error R6034. An application has been made an attempt to load the C runtime library incorrectly.please contact the application support team for more info.and every time i tried to open itunes on my desktop i receive this message.So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.

    So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.
    Could you walk us through what happened when you tried to do the download, please?

  • How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

    How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

    Hey Debbiered1,
    Follow the steps in this link to resolve the issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    When you uninstall, the items you uninstall and the order in which you do so are particularly important:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • HT201210 Just updates itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?

    Just updated itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I'm unable to open itunes after the recent upgrade. Runtime error R6034 is the error message. I recently replaced my iPhone and I don't want to loose my data by uninstalling and re-installing the itunes?

    Hi,
    I've recently replaced my iphone 5 and I couldn't restore my data into my new phone, as it asked me to do the software upgrade on itunes in my computer. So, I did the itunes upgrade, which is now causing the Runtime error R6034. I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps. Plz advice, as how this runtime error can be fixed and at the sametime, I will still be able to restore my data into my new phone.

    Suresh14 wrote:
    I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps.
    Uninstalling & Re-installing iTunes will not delete your iTunes Library Data.
    Do the following:
    Uninstall from Windows the following four programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
    Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
    Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

  • HT5654 As a result of installing an itunes update I got a runtime error (R6034). I cannot access my library. If I uninstall my current version of Itunes and then reinstall Itunes from their website do I loose the songs that are currently in my library?

    As a result of downloading an Itunes update on my PC I got a runtime error (R6034). I now cannot access my Itunes Library. If I uninstall Itunes and then reinstall the latest version do I loose the songs in my library, which I paid for?
    Thanks

    Hi there norad73,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W.

Maybe you are looking for

  • ADF: How to get the attributes' values of one single row from a table?

    Currently I have a table with 3 attributes, suppose A,B and C respectively. And I've added an selectionListener to this table. That means when I select one single row of this table, I wish to get the respective value of A, B and C for that particular

  • Airplay is constantly not working and connected to internet but not showing content

    This happens ALL the time.  So my apple tv airplay constantly goes out and doesnt work anymore.  I try my ipad, ipad mini, and iphone 6 and NONE work.   I then I have to reset my apple tv, but then it doesnt show any content.  It is connected to the

  • How do I have a client submit a form back to me?

    In our lobby we would like to have our clients submit a very simple form of only 5 questions to our receptionist. The PDF would be ready to go on our lobby computer, the client would simply answer the 5 questions, and then we would like it sent from

  • Reversing a document posted to multiple vendors

    Hello--I have a bit of a situation, and I was hoping someone could help. I have a payment that was posted incorrectly, and I need to reverse it. I tried using FBRA and reversing the clearning document, but I get the error message "Document 15xxxxxxxx

  • Transporting Master data - New GLs,Cost Center and profit Center.

    Dear Friends, 1. I have to create new GLs in Dev, Now i have to transport the new GL to Quality and Production. As per my knowledge, Master data has to created in DEV,Quality and Production. please suggest, is there any t.code where i can transport G