Runtime error RAISE_EXCEPTION occured

I have created a session after my LSMW is processed. I am not able to process the session in back ground. When I am trying to process that session in back ground, I am not able to do that. I am getting the errror "Runtime error RAISE_EXCEPTION has occured". But I am able to process that session in the foreground. Kindly suggest me something.

If the session is ran in back ground, then it is throwing the error for all the records "Runtime error RAISE_EXCEPTION has occured ".

Similar Messages

Runtime errors "Raise_Exception" occur when running crystal report

Dear all expert,
I had develop a CR. It is fine and I can run it. but in our remote system, there is a runtime error "RAISE_EXCEPTION" with exception condition "EXECUTION_HALTED". There is no error show to me at CR side where the report is running fine. But I wonder why the is a runtime error in the remote system.
Thank You.

Hi Ingo,
I had check the transport folder in my integration solution installer kit folder. There is only Folder with name "ansi" and "unicode_compatible".
The readme for my transport file are as below:
There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled.
The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names.
If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:
(These files are ANSI.)
Open SQL Connectivity transport (K900084.r22 and R900084.r22)
Info Set Connectivity transport (K900085.r22 and R900085.r22)
Row-level Security Definition transport (K900086.r22 and R900086.r22)
Cluster Definition transport (K900093.r22 and R900093.r22)
Authentication Helpers transport (K900088.r22 and R900088.r22)
If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
(These files are Unicode enabled.)
Open SQL Connectivity transport (K900574.r21 and R900574.r21)
Info Set Connectivity transport (K900575.r21 and R900575.r21)
Row-level Security Definition transport (K900576.r21 and R900576.r21)
Cluster Definition transport (K900585.r21 and R900585.r21)
Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
The dump "raise_exception" occur when in the Crystal Report Designer.
Thank You.

ABAP runtime errors RAISE_EXCEPTION occured

Hi all,
I have SAP Material management landscape and user gets short dumps with exception.
here are the detils.
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLYMQX " in
"Y_INSERT_TO_YMTOES_INT_DTLS".
The main program was "YM_DATA_FLEX_TO_DEMAND ".
The termination occurred in line 73
of the source code of program "LYMQXU06 " (when calling the editor 730)
========
code extract
========
insert into YMTOES_INT_DTLS values wa.
if sy-subrc <> 0.
raise insert_error.
==========
Need help in how to see why this occuring.
Edited by: Vijay Dhamera on Oct 24, 2008 11:53 AM

ST22 details as follows
Error analysis
A RAISE statement in the program "SAPLYMQX " raised the excep
condition "INSERT_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
ERROR DURING INSERT
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.

Runtime error RAISE_EXCEPTION has occurred

I am running BDC in background for PP03 and getting this error message "Error message: (00/341) Runtime error RAISE_EXCEPTION has occurred" but while running in foreground it is working fine.In mode E there is no error ie successfully executed but in background this exception "Exception condition "CNTL_SYSTEM_ERROR" is raised......Please give details analysis of problem as i am new to ABAP-HR.. Pasting the dump also. ABAP Gurus please dont adivice me to try with other alternates like BAPI etc. As i am doN'T know about BAPI and i am bound to fix the problem by BDC only
Thanks in advance

You cannot use PP03 in batch. It is not batch compatible.It uses some control framework which work only if the SAP GUI is active or when it is run in foreground. Use PP02 instead.A workaround of the problem would be to switch off the object manager: Set the ADMINISTRATION OBJMG switch in table T77S0 to X or (to deactivate the object manager for specific users only) proceed according to Note 496718.
In the medium or long term, SAP recommends that you use Transaction PP02 only. Transaction PP02 is and will be the only transaction that is fully batch-input-compatible (also in future releases).

Iw31 -Recording - Runtime error RAISE_EXCEPTION has occured

Recently We updated Support Pack.
We already operating a transaction, IW31 through a recording method.
After Support Pack, We can able to create Order for only one technical object. We cannot able to create Order for other selected Technical Object.
We tried Recording through Abaper. We got a Run time Error.
Runtime error RAISE_EXCEPTION has occured
Any SAP Note to be applied.
Please suggest.
Raja

hi
check in service market place for the support patch level impact notes in the maintenance and services tab,

Runtime error RAISE_EXCEPTION Exception condition "METADATA_MISSING" raised

Hi All,
I am facing a runtime error, while using transaction DSWP --> Set-up System Monitoring --> Copy Customizing -->
At that time we are getting "Runtime error RAISE_EXCEPTION Exception condition "METADATA_MISSING" raised
===========================================
Runtime Errors RAISE_EXCEPTION
Date and Time 25.07.2008 08:31:11
Short text
Exception condition "METADATA_MISSING" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "SAPLDSVAS_SERV" raised the exception
condition "METADATA_MISSING".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLDSVAS_SERV" or "LDSVAS_SERVC7I"
"MAP_DSVAS_TT_DATA_TO_TT_25"
or
"SAPLDSVAS_SERV" "METADATA_MISSING"
or
"RDSMOP_MAIN " "METADATA_MISSING"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "terra"
Network address...... "172.16.1.198"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "TERRA"
Database type..... "ORACLE"
Database name..... "DSM"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 01:07:18"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 133
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 37628064
Heap.... 0
Page.... 65536
MM Used. 31785376
| MM Free. 1656912
=============================================
Configuration:
OS :Windows 2003 server.
Solution Manager 7.0 SP15
Oracle 10.2
RAM - 2 GB
Its bit urgent, Please help out us.
Thanks in advance.
Best Regards,
Pratyusha

Hi
Check the SP level for ABAP and Basis. Download the latest SP level from SWDC and apply it on the system
This error is related to ABAP program.
Currently the latest available patch level is 16. Please download both ABAP and BASIS SP 16 and apply them on the system.

ABAP Runtime Error : RAISE_EXCEPTION

Hi Friends,
I am getting the below dump.
Runtime Error: RAISE_EXCEPTION
A RAISE statement in the program "SAPLRSDU_PART" raised the exception condition "TABLE_NOT_EXISTS".
Can any body help me to understand why this error occured.
Thanks & Regards
Prasanth

Friends,
Below is the place where it got terminated.But the issue solved by rerunning the process chain. We have to provide report on why this error occured. So please tell me could be is the reason behnd this error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLRSDU_PART" - in
     "RSDU_PARTITIONS_INFO_GET".
    The main program was "RSPROCESS ".
     In the source code you have the termination point in line 47
    of the (Include) program "LRSDU_PARTU02".
    The program "SAPLRSDU_PART" was started as a background job.
    Job Name....... "BI_PROCESS_REPA_BC"
    Job Initiator.. "MAESTRO"
    Job Number..... 06564401

Runtime error raise_exception (Exception condition "NOT_EXIST" raised)

Hi,
I tried to ran a DTP to load data in a Standard DSO. Once I run the DTP ,instantly it is showing me short dump.I tried to ran it 2 times. Every time it shows me dump
Runtime Errors RAISE_EXCEPTION
Short Text : Exception condition "NOT_EXIST" raised.
Error Analysis : A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Thanks in advance,
Regards,
Snehasish

Hi,
This kind of issues occur in BI7.0, the cause is not clear.
You can once again delete the Data in the DSO using SE14(If Production system, make sure you contact your Basis team for this).
You will have to use the table names(check the Delete data option & click on Activate and adjust databas)
Thanks,

Runtime Errors RAISE_EXCEPTION in "SAPLTAX1" due to "INPUT_INCONSISTENT"

Hi Gurus,
Here i got dump which is Runtime Errors RAISE_EXCEPTION in program "SAPLTAX1" due to "INPUT_INCONSISTENT",
will you people please help me to resolve this problem.
here i past error details,
Short text
    Exception condition "INPUT_INCONSISTENT" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "SAPLTAX1" raised the exception
    condition "INPUT_INCONSISTENT".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Thanks,
Namdev.

That message appears to come from FM CHECK_JURISDICTION_ACTIVE.
It may be a configuration piece is missing:
IF I_LAND IS INITIAL.
SELECT SINGLE * FROM T001 WHERE BUKRS = I_BUKRS.
SELECT SINGLE * FROM T005 WHERE LAND1 = T001-LAND1.
ELSEIF I_BUKRS IS INITIAL.
SELECT SINGLE * FROM T005 WHERE LAND1 = I_LAND.
ELSE.
SELECT SINGLE * FROM T001 WHERE BUKRS = I_BUKRS.
IF T001-LAND1 <> I_LAND.
    RAISE INPUT_INCONSISTENT.
ELSE.
    SELECT SINGLE * FROM T005 WHERE LAND1 = I_LAND.
ENDIF.
ENDIF.

When executing a query showing as ABAP runtime error RAISE_EXCEPTION

Hi all,
When i executed a query, it is showing as ABAP runtime error RAISE_EXCEPTION in the short dump.
This is the Analysis in Short dump (ST22)...............
Exception condition "DATE_BEFORE_RANGE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLSCAL" raised the exception
condition "DATE_BEFORE_RANGE".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Date is earlier than factory calendar definition
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLSCAL" or "LSCALU06"
"DATE_CONVERT_TO_FACTORYDATE"
or
"SAPLSCAL" "DATE_BEFORE_RANGE"
or
"WRITEQUERY " "DATE_BEFORE_RANGE"
Could you pls any one tell me what could be the problem and how to reslove this issue.
Thanks & Regards,
Ravi Kumar.

Hi Andre,
Maintain your factory calendar idents Valid To year field (BJAHR) in Table TFACD
You can do this via tcode SCAL, or navigate through SPRO.
Most likely you have your factory calendars set with Valid To dates as 2010. You may also be encountering some load issues depending on exit routines used in transformations in determining workdays/factory days etc.
Thanks,
Eric Filmer

Abap runtime error UNICODE_TYPES_NOT_CONVERTIBLE occured

Hi,ecpert:
I have encountered one abap runtime error UNICODE_TYPES_NOT_CONVERTIBLE
and the main logic list below:
First, I define one parameter which user can input from selection screen.
PARAMETERS:P_TABNAM LIKE DD03L-TABNAME .
Then, I get the dynamic internal table based on P_TABNAM .
CALL METHOD cl_alv_table_create=>create_dynamic_table
               EXPORTING
                  it_fieldcatalog = ifc
               IMPORTING
                  ep_table        = dy_table.
ASSIGN dy_table->* TO <dyn_table> .
Then, after filling data to <dyn_table>, I want to modify the (P_TABNAM).
MODIFY (P_TABNAM) from TABLE <dyn_table>.
And when I run this program , one runtime error UNICODE_TYPES_NOT_CONVERTIBLE occurred.
Pls give suggestions, thanks.

Quite appreciate your help, I tried this T-code
however, I got no information after run it with my program name
In addition, this program can be activated properly in ABAP editor,and error occured
when execute the 'Modify' clause.

Get a popup an exception runtime error has occurred in script unable to jit debug

i get a pop up window, just-in-time debugging
An exception 'runtime error' has occurred in script.
However, no debuggers are registered that can debug this exception. Unable to JIT debug.

'''I think I solved it myself yesterday, indirectly''' by deleting a Googleupdater.exe file dated 042511. It has been over 24 hours now and no sign of the 'Just-In-Time Debugger' pop-up. Whew...it was incessant.
Not sure how I got the Googleupdater.exe file on my computer. I did download Microsoft Security Essentials to help find the JIT problem, but it failed to install properly and run. The next day I remembered it probably only runs on Internet Explorer (which we deleted in 2009) after testing out Firefox. I then also deleted Security Essentials.
I also downloaded on April 25th the free version of MS Visual Basics because I read on eHow that you can adjust settings in the 'TOOL' menu to stop JIT Debugging pop-ups. However, the free version was 'MS Visual Studio Basic 2008 Express Edition - SP1' which did NOT provide access to JIT Debugging settings (so it was not a solution).
I must say I switched Internet Security programs to AVAST! on TU | Apr26th and love it so far. Highly recommend looking into AVAST! ver 6.0 at CNET downloads - free. The anti-virus program is free, but everything else costs about $30US for a year. WORTH IT Love the options | settings | flexibility|user friendly windows.
Trend Micro was then deleted. It had always blocked usage of our internal CD|DVD drive. To use the CD|DVD drive we had to shut off Trend Micro and then turn it back on again after we finished using the CD|DVD drive. NOT a preference - for sure. Jaykay

A Runtime Error Has Occured Do you wish to Debug? Line 90 Error: Object Expected

A Runtime Error Has Occured Do you wish to Debug? Line 90
Error: Object Expected
This error is recieved when trying to open "The Fan" video
news Page from Comcast, This error appears and when you select yes
or no, the page comes up to install Adobe Flash Player, however
even after installing it, the error still appears when attempting
again, even after restart, this does not occur on Firefox, only
IE

Also I am on Windows Vista

Error: "A runtime error has occurred."

I am receiving the following error after installing SP3 on crystal XI release2
A runtime error has occurred.
Do you wish to Debug?
Line: 515
Error: Object Expected
Any Ideas?

The following SAP note would help you
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Regards,
Raghavendra

Runtime Errors "RAISE_EXCEPTION"

Hi Friends,
During the execution of scheduled background job .The system is showing RUN TIME ERROR "RAISE_EXCEPTION" when i am going through job log.
Pls help me to find out the reason of this runtime error.When this occurs with this type of runtime occurs & how can i resolve this.
With Regards
Amit

Exceptions as raised by function modules. If a program calling the function module does not handle the exception (check for sy-subrc value after the call to the function module) or switch off the exception ( OTHERS = 0 in the function module call exception list) a dump would result in the event that the function module does raise an exception.
If this call to the function module is in a Z program you can change the code to either handle or switch off the exception. If it is an SAP program (which should not be the case because that would mean it is a bug that SAP needs to fix) then you would have to investigate why the function module failed and how can the raising of the exception be avoided.
To know which function module failed look at the dump in transaction ST22.

Runtime error RAISE_EXCEPTION occured

Similar Messages

Maybe you are looking for