Runtime Error: SAPSQL_INVALID_TABLENAME or CX_SY_DYNAMIC_OSQL_SEMANTIC
Hi all!
When starting a BPS-Layout, I get a Runtime Error.
The Error comes from a Program, which selects from a temporary table:
Select preis_ref from (W_tabelle) into w_preis.
endselect.
W_tabelle is at this moment for example "/BI0/0100000054"
This sholud be the temporary table.
But in the TA "se11" I can't find this table...
This is a usefull txt from the short dump:
A SELECT, UPDATE, or DELETE statement contains the invalid table
name "/BI0/0100000054".
This error was only recognized at runtime for one of the following
reasons:
- The table names were specified dynamically. or
- The SELECT, WHERE, GROUP-BY, HAVING or ORDER-BY clauses were specifed
dynamically.
This dump is in our evaluation system, in our Production System I've got no problem. They have the same patches!
Thanks
EL-Q
Hi all!
I have checked the settings in the area, level and also what I have in the layouts.
And I have checked all the variables.
I have saved the layouts and the areas, too.
Everything is fine!
But it doesn't work!
Anyone another idea?
Similar Messages
-
Runtime error SAPSQL_INVALID_TABLENAME while activatin Infocube
Hi,
I modified an Infocube.
I saved it in a transport request.
While activating the Infocube I get the short dump:\
Runtime Errors SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Short text
A table name, specified in an SQL command, is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSDU_UTIL_DB6" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Can anyone please help.Hi kt,
You may get this issue because of improper cube structure.
Try to activate the info cube with RSDG_CUBE_ACTIVATE program.
Hope this will resolve your issue..
Best Regards,
Maruthi -
Hi,
I have a problem with my BI7 sandbox system. If I do any changes or modifycations in BI7 system it`s giving ABAP rentime error.
Runtime Errors: SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "RSDU_DATA_EXISTS_TABLE_DB6" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An invalid table name "/BI0/D0PT_C012" was specified in an Open SQL command:
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
I thought problem could be memory or tables space problem. I was infirmed to basis people. Basis people checked and said that there is enough dabase space and table space.
Does anybody can help on this.
Thanks in advance,
VenkatHi...
Re: SAPSQL_TABLE_NOT_FOUND
Error in SQL Statement: SAPSQL_INVALID_TABLENAME
This may help you.........
Regards,
Debjani......... -
Runtime error while saving the billing document after creation
hi friends ,
while saving the billing document after creation , the fallowing discriptive runtime error has come.
Run time errors -
SAPSQL_INVALID_TABLENAME
Except. -
CX_SY_DYNAMIC_OSQL_SEMANTICSDear Unnam,
There may be several reasons...
1. If u have enhanced the tcode with some z tables,and that might not be moved properly to prod or not active in data dictonary.
2. u may not be entering proper data to the input fields.
3. please check if u have added any z tables to the std tcode.I am exepcting this prob.u may not moved the table or enhancement properly to prod server,
Please check it...
Thanks N Regards
SettyKY -
Getting runtime error during billing vf01
Hello,i was doing billing vf01 getting runtime error after saving. what shud i do.The error says "SAPSQL_INVALID_FIEDNAME"CX_SY_DYNAMIC_OSQL_SEMANTIC SC"SAPLV61Z" or "LV61ZUQ1""SEL_KONDTAB".
This is what i got in the error, in "what shud be done" title of the error.kindly suggest to clear out this problem.Hi Ramya,
I am assuming you hv implemented your own function module in INCLUDE LV61ZUQ1. During VF01, SAP has detected at least 1 fieldname which does not exist in your ABAP codes/Select statement. This could happen, if for example a new field has been implemented in a structure/trans. table or new fields added to field catalogs, but has not been successfuly generated/SAP stored the info structure incorrectly.
If that's the case, the best way is to delete the field and re-generate, or if you added a field to field catalog, delete field in catalog then add, re-generate.
Cheers,
Benny Andre -
Runtime error in starting Lightroom
I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff CulpAha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am -
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas. -
Could someone help me with a Runtime Error while saving a PDF file?
While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
PamIt is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
I open the pdf file
A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
I select ok
then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam -
RunTime Error while saving a Sales Order
Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
PavanHi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR
hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situat
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the cur
screen.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AFZZ
Row 370
Module type (FORM)
Module Name USEREXIT_SAVE_DOCUMENT
SourceCde
message e001(zm) WITH text-335 ltab-kunnr text-334.
else.
if ktab-jkunnr <> ltab-kunnr.
ktab-jkunnr = ltab-kunnr.
jobsitecode = ltab-kunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = jobsitecode
IMPORTING
output = jobsitecode.
SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
IF sy-subrc = 0.
ktab-jname1 = kna1-name1.
ktab-jstras = kna1-stras.
ENDIF.
chg_flg = 'X'.
endif.
endif.
else.
message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
* if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
* message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
* endif.
custcode1 = ktab-ckunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = custcode1
IMPORTING
output = custcode1.
jobsitecode1 = ktab-jkunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = jobsitecode1
IMPORTING
output = jobsitecode1.
SELECT SINGLE * FROM knvp
WHERE kunnr = custcode1
AND vkorg = vbak-vkorg
AND vtweg = vbak-vtweg
AND spart = vbak-spart
AND parvw = 'WE'
Error analysis
The program attempted to issue a " " message during "Exit Command"
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AFZZ
Row 370
Module type (FORM)
Module Name USEREXIT_SAVE_DOCUMENTHi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"
Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situation
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the current
screen.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
How to correct the error
The program must be modified to correct the error.
The modification must be made in "Exit Command" processing.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
Source Code Extract
Line SourceCde
1 *---------------------------------------------------------------------*
2 * FORM YVBEP_LESEN *
3 *---------------------------------------------------------------------*
4 * Lesen der Tabelle YVBEP (nicht sortiert) *
5 *---------------------------------------------------------------------*
6 FORM YVBEP_LESEN USING US_POSNR
7 US_ETENR
8 CHANGING CH_TABIX.
9
10 YVBEP = SPACE.
11 YVBEP-MANDT = VBAK-MANDT.
12 YVBEP-VBELN = VBAK-VBELN.
13 YVBEP-POSNR = US_POSNR.
14 YVBEP-ETENR = US_ETENR.
15 READ TABLE YVBEP.
16 IF SY-SUBRC > 0.
17 MESSAGE E506 WITH US_POSNR US_ETENR.
18 ENDIF.
>>>>> CH_TABIX = SY-TABIX.
20
21 ENDFORM.
Could you please help on this issue.
Thanks
SrinuHi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus -
Portal runtime error while selecting page layout in WPC editor
Hello,
in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup.
The logfile shows the following :
#1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#1016#149##n/a##7ff9c93eab6811dfa9c70000003307de#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###10:06_19/08/10_0010_3344350
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: E:
usr
sap
EPD
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.netweaver.bc.util
lib
bc.util.public_api.jar(com/sapportals/wcm/WcmException.java):24: class WcmException is public, should be declared in a file named WcmException.java
(source unavailable)
1 error
I have the same by clicking on "check assignments"
Any help ?
ThanksHello Jego.
We faced the same issue after upgrade to EHP1 SP07 last week and managed to solve it by modification of layout.jsp and com.sap.nw.wpc.layoutmanager.LayoutBean within com.sap.nw.wpc.designtime.par. SAP's code requires an additional catch handler, so it is better to rise an OSS message.
As a workaround you may change a default layout for wpc main page (good for new pages) or manually edit output.xml for existing pages.
Best regards,
Aliaksandr Zhukau -
Runtime Error when installing Adobe Creative Suite 5.5 Production Premium
I am trying to install Adobe Creative Suite 5.5 Production Premium, but I keep getting a 'Runtime Error!': This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
What should I do? Any help greatly appreciated! I am running Win 7, Service Pack 1, 64 bit.We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
Mylenium -
Runtime error in enhancement spot-' mereq_topline does not exists.'
Hi all,
I have implemented an implicit enhancement spot in ME53n.
When i applied break point in enhancement spot and control goes to ebhancement spot in debugging mode, i got purchse requisition number in mereq_topline.
When i tried to use this structure value in code i get runtime error-
' mereq_topline does not exists.'
Can you please guide how to resolve this runtime error.
thanks.
Edited by: Sanjay_lnt on Sep 20, 2010 8:52 AMSanjay,
try to delete the enhancement and recreate it
Thanks
Bala Duvvuri -
Runtime Error in ALV Tree Output
Dear All, I am trying to create a ALV Tree using Class cl_gui_alv_tree. The Report Shows the Output with the first Node but when i try to expand it is dumping with a runtime error GETWA_NOT_ASSIGNED in class CL_ALV_TREE_BASE and method SET_ITEMS_FOR_COLUMN. The Reason being the data which was copied in the initial node display to mt_outtab is getting refreshed.
Can any one of you help me the reason for the table getting refreshed. Do i need to pass any data.
I am doing the following steps.
1. Create Container,
2. Create Tree Class object
3. Generate the Field Catalog.
4. Set table for first display " With empty internal table
5. Generate the Hierarchy
6. Call the Method Frontend Update.
Let me know if i had missed any steps in the process.
Thank you,
Regards,
Swaroop PatriOne reason for getting this error is using local defined tables for it_outtab parameter in the below code:
To get rid of the dump, define two distinct output tables globally: one is an empty table which you will pass to the below method, other one is your real output table whose size increases dependently.
CALL METHOD go_tree->set_table_for_first_display
EXPORTING
is_hierarchy_header = ls_hier_header
CHANGING
it_outtab = gt_data_e "Empty table
it_fieldcatalog = gt_fcat_tree.
Maybe you are looking for
-
Messages on MacBook Pro after iOS 8 update on iPhone not working
So, all my Apple products and services have been working smoothly until I updated my iPhone 5 to iOS 8. Oddly enough, after that my Messages app on my mac stopped working. I logged out, and TRIED to log back in, but it says "Your Apple ID can't be us
-
is it possible to change the hard drive in a macbook pro, if so where from? and how?
-
Oracle 11g R2 installtion in Linux Author: Arun For Reference: http://www.morganslibrary.org/reference/linux_oracle_inst11gR2.html Operating System Configuration 1.As root: Install RPM’s For RHEL 5 (32-bit): rpm -Uvih binutils-2* rpm -Uvih compat-lib
-
How to access the EmbeddedFontRegistry in actionscript only code?
Hi, My name is Zach and I am trying to push outside of the flex framework, but keep the advantages of RSL's. I created my own Component/Data Library where all UI objects inherits directly from Sprite. However, when I moved this out of the Flex envi
-
(SOLVED) bash script header problem
When i run this piece of code from the command line it works properly, but when i try and run it from a script it doesn't. It's supposed to be the beginning of a header printf "%*s\n" "$((COLUMNS))" " " | tr " " "=" ; printf "%*s\n" $((COLUMNS/2)) "