Runtime error smartform

HI experts ,
                  I have smartforms for Stock Report. and respective selection screen in se38. while executing its shows Below runtime error.
Runtime Errors         CALL_FUNCTION_CONFLICT_LENG
Exceptn                CX_SY_DYN_CALL_ILLEGAL_TYPE
Date and Time          07.07.2007 16:15:34
ShrtText
    Type conflict when calling a function module (field length).
What happened?
    Error in ABAP application program.
    The current ABAP program "ZSTOCK_TR" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    A function module was called incorrectly.
Error analysis
    An exception occurred. This exception will be dealt with in more detail
    below. The exception, assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
     not caught, which
     led to a runtime error. The reason for this exception is:
    The call to the function module "/1BCDWB/SF00000017" is incorrect:
    In the function module interface, you can specify only
    fields of a specific type and length under "GT_STRUCT".
    Although the currently specified field
    "GT_STRUCT2" is the correct type, its length is incorrect.
Source Code Extract
Line SourceCde
304
305 SELECT stceg into ITAB0-stceg FROM kna1 WHERE KUNNR = VKUNNR.
306 APPEND ITAB0.
307 ENDSELECT.
308
309 select vgbel from lips into itab0-ponum where vbeln in vbeln.
310 append itab0.
311 endselect.
312 DATA : LINES TYPE STANDARD TABLE OF TLINE WITH HEADER LINE.
313
314 ***************************************************************
315
316 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
317    EXPORTING
318      FORMNAME                 = 'Z_STOCK_TR'
319 *    VARIANT                  = ' '
320 *    DIRECT_CALL              = ' '
321   IMPORTING
322     FM_NAME                  = gv_fname
323 * EXCEPTIONS
324 *    NO_FORM                  = 1
325 *    NO_FUNCTION_MODULE       = 2
326 *    OTHERS                   = 3
327            .
328 IF SY-SUBRC <> 0.
329 * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
330 *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
331 ENDIF.
332
333
>334         CALL FUNCTION gv_fname
335       exporting
336 *           ARCHIVE_INDEX              =
337 *           ARCHIVE_INDEX_TAB          =
338 *           ARCHIVE_PARAMETERS         =
339 *           CONTROL_PARAMETERS         =
340 *           MAIL_APPL_OBJ              =
341 *           MAIL_RECIPIENT             =
342 *           MAIL_SENDER                =
343 *           OUTPUT_OPTIONS             =
344 *           USER_SETTINGS              = 'X'
345                                  plant = plant
346 *              vbeln                    =    exc_inv
347 *              srdoc                    =    srdoc-low
348 *              vexdat                   =    vexdat
349 *              vrdoc                    =    vrdoc
350 *              ptotal                   =    ptotal
351 *              line1                    =    line1
352 *              fkwert                   =    fkwert
353 *              ikwert                   =    ikwert
Plz help. Thanks alot.
Khan.

Hi
I think u have not called Function module properly
check this sample code
Tables : sflight.
Data : fm_name TYPE rs38l_fnam.
*data : Begin of it_flttab occurs 0,
*        carrid type sflight-carrid,
*        connid type sflight-connid,
*        fldate type sflight-fldate,
*        seatsmax type sflight-seatsmax,
*        seatsocc type sflight-seatsocc,
*        End of it_flttab.
data : it_flttab like table of sflight.
Data : g_salary type i .
*       it_flttab type standard table of ty_flt.
g_salary = 1000.
select carrid connid fldate seatsmax seatsocc from sflight into
corresponding fields of table it_flttab.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname                 = 'ZTACA_SMFORM2'
*   VARIANT                  = ' '
*   DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = fm_name
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
call function fm_name
Exporting
     salary = g_salary
TABLES
     it_flttab = it_flttab
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5           .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<b>2nd code</b>
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
        INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
   MOVE-CORRESPONDING MKPF TO INT_MKPF.
   APPEND INT_MKPF.
ENDSELECT.
* At the end of your program.
* Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
    formname                 = 'ZSMARTFORM'
*   VARIANT                  = ' '
*   DIRECT_CALL              = ' '
IMPORTING
    FM_NAME                  = FM_NAME
EXCEPTIONS
    NO_FORM                  = 1
    NO_FUNCTION_MODULE       = 2
    OTHERS                   = 3.
if sy-subrc <> 0.
   WRITE: / 'ERROR 1'.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
* EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
TABLES
    GS_MKPF                    = INT_MKPF
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5.
if sy-subrc <> 0.
   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Reward all helpfull answers
Regards
Pavan

Similar Messages

Runtime error in executing smartform

Hi,
I am working on smartform and its abap code in which i am getting runtime error :-
In the function "/1BCDWB/SF00000004", the STRUCTURE parameter "ITEM" is typed
in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter "ITEM_FINAL1" has an incompatible fragment view.
Here,item and item_final1(with header line) are the internal tables. plzz provide me guidelines for solvig this problem.
Edited by: ricx .s on Jan 16, 2009 6:24 AM

hi,
i had declared the ITEM and ITEM_FINAL1 AS :-
DATA : BEGIN OF item OCCURS 0,
       ebelp LIKE ekpo-ebelp,
       txz01 LIKE ekpo-txz01,
       cc     LIKE cacns_general-reserve3,
       eindt LIKE eket-eindt,
       menge LIKE ekpo-menge,
       rate   LIKE konv-kbetr,
       rate1 LIKE konv-kbetr, " NEW ZING
       rate2 LIKE konv-kbetr, " NEW ZGRD
       rate3 LIKE konv-kbetr, " NEW ZBDL
       disc   LIKE konv-kbetr,
       ed     LIKE konp-kbetr,
       ed1    LIKE konp-kbetr,"NEW
       ed2    LIKE konp-kbetr,"NEW
       tax    LIKE konp-kbetr,
       cutc   LIKE konv-kbetr,
       pf     LIKE konv-kbetr,
       insurance LIKE konv-kbetr,
       frt LIKE konv-kbetr,
       inst LIKE konv-kbetr,
       octroi LIKE konv-kbetr,
       knumh LIKE konh-knumh,"NEW
       matnr LIKE ekpo-matnr,"NEW
       vakey   LIKE konh-vakey,"NEW
       total LIKE konv-kbetr,
       mtart LIKE ekpo-mtart,
       bwtar LIKE ekpo-bwtar,
       knttp LIKE ekpo-knttp,
       meins LIKE ekpo-meins,
       END OF item.
DATA : item_final1 LIKE item OCCURS 0 WITH HEADER LINE.
here's d code of the form :-
CALL FUNCTION form_name
    EXPORTING
      control_parameters = t_control_parameters
      output_options     = t_output_options
      user_settings      = 'X'
      vknumv             = vknumv
      vtex               = vtex
      vebeln             = vebeln
      vkwert             = vkwert
    TABLES
      header             = header
      item               = item_final1
    EXCEPTIONS
      formatting_error   = 1
      internal_error     = 2
      send_error         = 3
      user_canceled      = 4
      OTHERS             = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IN the smartform i had declared it as it was in the declaration of the internal table(ITEM).
I

Getting Runtime error while adding Second page in Smartform.

I added 2 pages in smartform. When I worked with single page. smartform working properly. Now I added one more page(i.e Second page) I am getting runtime error. ("The current ABAP/4 program encountered an unexpected
situation". A RAISE statement in the program "SAPLSTXBC" raised the exception
condition "ERROR".) When I debug this standard program Something width problem getting on line number 110. Both width not matched so program raising exception. Can you please tell me to solve this problem what changes will I do in my smartform?

Please let me know the details of each page.
Error can occur in these cases.
1) You copied the first page to second. and later you change the width of second page
2) You created the second page and there is template in second page. each column width is not matching with the total width of the template.
3) windows width is greater than the page width
Please have a look.
Regards,
Nikhil
Edited by: Nikhil V Kumar on Jul 27, 2010 12:16 PM

Runtime error in print program of a smartform

Hi,
While trying to execute the print program of a smartform I am getting the following runtime error.
The reason for the exception is:
The call to the function module "/1BCDWB/SF00000288" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "IT_BOOKINGS".
Although the currently specified field
"IT_BOOKINGS" is the correct type, its length is incorrect.
In the form interface of the smartform under tables parameters I have declared like this.
IT_BOOKINGS LIKE SBOOK
IT_SCHEDULE LIKE SPFLI
Can anyone tell me why do we get this error?
Regards,
Hema

Hello,
program to call smartform is really simple :
-> function SSF_FUNCTION_MODULE_NAME give you the name of the function link to your sapscript.
-> function WFMC_PREPARE_SMART_FORM help your to prepare your options to your smartform.
-> function xxx to call your smartform (find with the first function).
Sometimes you have to play with values of NAST (for ex) to find the language (set in control_parameters) or for example if you want to print without display (when it ask you for print / print preview and the name of the print device) .....
Frédéric

Smartform runtime error

hi,
    when i am executing the smartform a runtime error is raised in function module
SSFCOMP_GENERATE_SMART_FORM and the error is err_comp ssf_err_main_width_changed 'A' 080 can anyone tell what is the error its throwing ?

Hi harri kishan,
             As shivkumar said. All the main windows of pages should have the same width. If width varies, then form will got dump. So make sure all the main windows should have the same measurements.
      Award points if its useful to you. Feel free to contact me.
Regards
Sreenivasa sharma k.

Runtime error when executing smartform in se38

hi,
i designed a smartform but when iam executing that using se38 am gettin runtime error.can anybody plz help me.
*& Report ZDEMOPRG
REPORT ZDEMOPRG.
DATA FNAME(30) TYPE C.
TABLES: LFA1.
DATA: BEGIN OF ITAB OCCURS 0.
        INCLUDE STRUCTURE LFA1.
DATA: END OF ITAB.
SELECT-OPTIONS S_KUNNR FOR LFA1-KUNNR MEMORY ID 001.
SELECT * FROM LFA1 WHERE KUNNR IN S_KUNNR.
   MOVE-CORRESPONDING LFA1 TO ITAB..
   APPEND ITAB.
ENDSELECT.
CALL FUNCTION '/1BCDWB/SF00000006'
EXPORTING
    FORMNAME = 'ZEXM_SMART'
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    ITAB                       = ITAB.
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
plz help me
thanks
sudheer

Hi,
Try this and reward points by clicking the star on the left of reply,if it helps.
data: form_name type tdsfname value 'ZEXM_SMART'.
data: fm_name type rs38l_fnam.
TABLES: LFA1.
DATA: BEGIN OF ITAB OCCURS 0.
INCLUDE STRUCTURE LFA1.
DATA: END OF ITAB.
SELECT-OPTIONS S_KUNNR FOR LFA1-KUNNR MEMORY ID 001.
SELECT * FROM LFA1 WHERE KUNNR IN S_KUNNR.
MOVE-CORRESPONDING LFA1 TO ITAB..
APPEND ITAB.
ENDSELECT.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
    formname                 = form_name
VARIANT                  = ' '
DIRECT_CALL              = ' '
importing
   fm_name                  = fm_name
exceptions
   no_form                  = 1
   no_function_module       = 2
   others                   = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
CALL FUNCTION fm_name
TABLES
ITAB = ITAB
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop.

Runtime Error for the Picking List Smartform

Hi All,
I am working on the smartform, used for GI Scrapping for 551 Movement type. The requirement is they need DEA number for the Plant. I have written code for getting the DEA number. Iacivated the form and I want to print it using the TCODE MB02.
I get the runtime error saying UPDATE TERMINATED.I saw Dump Analysis it says CALL_FUNCTION_PARM_MISSING. It says IS_ADRC is the parameter. The ABAP program is the include program /SMB40/M07DRSON. This show the function module lf_fname with out passing the parameter IS_ADRC. How can I change the program. This is Standard program.
Thanks,

Then the smart form interface in the transaction SMARTFORMS you have to remove the parameter IS_ADRC. As the calling program will not automatically add the parameters if you add it in the smartforms...
If you want the values from the table ADRC..you can write subroutines in the INITIALIZATION to get the values...
Thanks,
Naren

Runtime Error when trying to trigger smartform from VL03N

Hi all,
i am having a runtime error while trying to triger my smartforms from transaction VL03N.
The error is 'The current ABAP program "SAPLV60U" had to be terminated because it has come across a statement that unfortunately cannot be executed.'
The it's in the include: "LV60UF0K"
                                                                                |   21| LOOP AT XKOMV.
|   22|    KONV       = XKOMV.
|   23|    BELEG = XKOMV-KNUMV.
|   24|    IF BELEG-ID = '$'.
|   25|      PERFORM VBRK_BELEGNUMMER_ERMITTELN.
|   26|      XKOMV-KNUMV = XVBRK-KNUMV.
|   27|    ENDIF.
|   28|    MODIFY XKOMV.
|   29| ENDLOOP.
|>>>>>| INSERT KONV FROM TABLE XKOMV.
|   31| IF SY-SUBRC NE 0.
|   32|    MESSAGE A100 WITH 'KONV' SY-SUBRC XKOMV-knumv.
|   33| ENDIF.
can anyone help me on this please..
Thanks in advance
Regards
Nitin

This looks like standard SAP code, your best bet is to log this as a problem on service.sap.com
Regards,
Nick

Runtime error when executing driver program

when im executing my report after passing smartform to it , by giving invoice number in selectionscreen,it's generating runtime error as
the call to the function module     '/1BCDWB/SF00000032'   is incorrect:
in the function module interface, u can only specify fields of a specific type and
length under "s_final".although the currently specified field "    " is the correct type,
it's length is incorrect.
i declared s_final in forminterface->tables as s_final like zform1.
i defined zform1 with fields which are in t_final.
please suggest where im going wrong.
TYPES : BEGIN OF TY_FINAL,
       VBELN TYPE VBRP-VBELN,"INVOICE NO
        ADRNR TYPE KNA1-ADRNR, "ADDRESS FOR CONSIGNEE
        BSTKD TYPE VBKD-BSTKD,   "PO NUMBER
        BSTDK TYPE VBKD-BSTDK, "PO DATE
         ARKTX TYPE VBRP-ARKTX, "DESCRITION
        PACK TYPE I,           "NO OF PACKAGES
        UMREZ TYPE SMEINH-UMREZ, "AVG. CONTENTS PER PACKAGE IN KGS
         FKIMG TYPE VBRP-FKIMG, "TOTAL QTY IN KGS
         KNUMV TYPE KONV-KNUMV,
         KBETR TYPE KONV-KBETR, "SELLING RATE/KG
        KBETR1 TYPE KONV-KBETR,
         KWERT TYPE KONV-KWERT,
         TARIFF TYPE ZFORM1-TARIFF,
         DUTY TYPE ZFORM1-DUTY,
         AMOUNT TYPE ZFORM1-AMOUNT,
         END OF TY_FINAL.
    TYPES : BEGIN OF TY_ITEM,
            VBELN TYPE VBRP-VBELN,"INVOICE NO
            POSNR TYPE VBRP-POSNR,
            ARKTX TYPE VBRP-ARKTX, "DESCRITION
            FKIMG TYPE VBRP-FKIMG, "TOTAL QTY IN KGS
             BSTKD TYPE VBKD-BSTKD,   "PO NUMBER
             BSTDK TYPE VBKD-BSTDK, "PO DATE
             AUBEL TYPE VBRP-AUBEL,
             AUPOS TYPE VBRP-AUPOS,
            END OF TY_ITEM.
DATA : FM_NAM TYPE RS38L_FNAM VALUE '/1BCDWB/SF00000032'.
DATA :IT_ITEM TYPE TABLE OF TY_ITEM,
      W_ITEM TYPE TY_ITEM,
      W_FINAL TYPE TY_FINAL,
      T_FINAL TYPE TABLE OF TY_FINAL,
     P TYPE I VALUE 250, "total quantity.
      TOTALDUTY TYPE I VALUE 0,
       CESS TYPE I,
       EDCESS TYPE I,
         VAT TYPE I,
         FREIGHT TYPE I,
         GROSSTOTAL TYPE I,
       TOTAL TYPE I,
       PONUMBER TYPE VBKD-BSTKD,   "PO NUMBER
       PODATE TYPE VBKD-BSTDK, "PO DATE
        ZTERM TYPE VBKD-ZTERM, "PAYMENT TERMS
       INVOICENO TYPE VBRP-VBELN.
PARAMETERS : XVBELN TYPE VBELN.
SELECT VBELN
       POSNR
       ARKTX
       FKIMG
       AUBEL
       AUPOS
       FROM VBRP
       INTO CORRESPONDING FIELDS OF TABLE IT_ITEM
       WHERE VBELN = XVBELN AND UEPOS = '000000'.
LOOP AT IT_ITEM INTO W_ITEM.
*INVOICE NO
MOVE W_ITEM-VBELN TO INVOICENO.
*DESCRIPTION
MOVE W_ITEM-ARKTX TO W_FINAL-ARKTX.
**TOTAL QUANTITY IN KGS
MOVE W_ITEM-FKIMG TO W_FINAL-FKIMG.
*PO NUMBER
SELECT SINGLE BSTKD FROM VBKD
INTO W_ITEM-BSTKD
WHERE VBELN EQ W_ITEM-AUBEL.
MOVE W_ITEM-BSTKD TO PONUMBER.
*PO DATE
SELECT SINGLE BSTDK FROM VBKD
INTO W_ITEM-BSTDK
WHERE VBELN EQ W_ITEM-AUBEL.
MOVE W_ITEM-BSTDK TO PODATE.
SELECT SINGLE KNUMV FROM VBRK INTO W_FINAL-KNUMV WHERE VBELN = W_ITEM-VBELN.
**SELLING RATE/KG
SELECT SINGLE KBETR FROM KONV INTO W_FINAL-KBETR WHERE KNUMV = W_FINAL-KNUMV
           AND KPOSN = W_ITEM-POSNR AND KSCHL = 'PR00'.
**TOTAL TARIFF VALUE
            W_FINAL-TARIFF =   W_FINAL-KBETR * W_ITEM-FKIMG.
SELECT SINGLE KBETR FROM KONV INTO W_FINAL-KWERT WHERE KNUMV =   W_FINAL-KNUMV
           AND KPOSN = W_ITEM-POSNR AND KSCHL = 'JEXT'.
*TOTAL DUTY PAYABLE
           W_FINAL-DUTY = W_FINAL-KWERT / 10.
**AMOUNT
           W_FINAL-AMOUNT =   W_FINAL-TARIFF +     W_FINAL-DUTY.
*TOTAL DUTY FOR CESS&EDCESS
            TOTALDUTY = TOTALDUTY + W_FINAL-DUTY.
            APPEND W_FINAL TO T_FINAL..
            CLEAR W_FINAL.
*WRITE : /10   W_ITEM-ARKTX,
        30 W_ITEM-FKIMG,
        60 W_FINAL-KBETR,
        90     TARIFF,
        120 DUTY,
        160 AMOUNT.
ENDLOOP.
*SELECT SINGLE KBETR FROM KONV INTO W_FINAL-KWERT WHERE KNUMV =   W_FINAL-KNUMV
          AND KPOSN = W_ITEM-POSNR AND KSCHL = 'ZECS'.
*MOVE   W_FINAL-KWERT TO CESS.
*SELECT SINGLE KBETR FROM KONV INTO W_FINAL-KWERT WHERE KNUMV =   W_FINAL-KNUMV
          AND KPOSN = W_ITEM-POSNR AND KSCHL = 'ZECX'.
*MOVE W_FINAL-KWERT TO EDCESS.
*CESS
CESS = TOTALDUTY * 2 / 100.
*EDCESS
EDCESS = TOTALDUTY * 1 / 100..
*TOTAL VALUE AT FOOTER
TOTAL = W_FINAL-AMOUNT + CESS + EDCESS.
*VAT
VAT = TOTAL * 4 / 100.
*FREIGHT
*GROSS TOTAL
GROSSTOTAL   = TOTAL + VAT.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZSF_SD_INVOICE1'
   VARIANT                  = ' '
   DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  =   FM_NAM
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION FM_NAM
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
    TOTALDUTY                  = TOTALDUTY
    CESS                       =   CESS
    EDCESS                     =   EDCESS
    TOTAL                      =   TOTAL
    PONUMBER                   = PONUMBER
    PODATE                     =   PODATE
    GROSSTOTAL                 = GROSSTOTAL
    VAT                        = VAT
    INVOICENO                  = INVOICENO
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    S_FINAL                    = T_FINAL
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi,
U need to fill the ref_fieldname and ref_tabname or the cfieldname, ctabname for currency fields and qtabname and qfieldname for quantity fields in fieldcatalog.
santhosh
Message was edited by:
        Kaluvala Santhosh

Smartfomrs - runtime errors call_function_parm_missing

Hi,
I am trying to add in address in the COMADDR windows in the standard smartform YBMY_MMGR1. I go to form interface -> import tab n add in IS_LFA1 type LFA1. Then create an address in the window n put &IS_LFA1-ADRNR& in adddress number under general attribute tab. When i try to display this in MB90 i receive error runtime errors call_function_parm_missing
please advice
thanks

hi rajesh,
Your answer in the form of steps :
1) In standard smartform you are trying to display some extra field (in your case
ADRNR from table LFA1).
2) First identify the Standard driver program that is used by your Smartform.
3) Open that program and search for function module 'SSF_FUNCTION_MODULE_NAME'.
4) This function module will have a formname returned in import parameter
'FM_NAME' in some parameter.
5) Below SSF_FUNCTION_MODULE_NAME you would see a 'call function <parameter>',where
parameter is the same parameter used to get formname in step 4.
6) In this call function you need to pass 'IS_LFA1-ADRNR' in the export parameter.
ie, for ex Write something like :
ADRNR = IS_LFA1-ADRNR
7) now open the form and in form interface add this variable along with the type.
8) activate both driver program and form and i believe you should be able to see
the adrn(dont forget to add the variable in the window you wish to use to display it)
Hope your issue get solved. <begging removed by moderator>
Edited by: Thomas Zloch on Jan 17, 2012

Runtime error when executing smarforms.

Dear All,
I am getting the runtime error while executing a smartfrom which I have prepared for payslip display.
After the completion of smartform, I have tested by using print program, it was working fine. But, when I got the print of the same and I found, little modification it requires to enlarge the views.So, I increased the width of templates, tables and windows which has been used in this smartform.
After that modification, it is going to reuntime error.
Please sugget....to rectify this.
Thanks & Regards
Nrusingha.

Please find the below details fr dump.
Short text
    Exception condition "ERROR" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
    administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "SAPLSTXBC" raised the exception
    condition "ERROR".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"RAISE_EXCEPTION" " "
    "SAPLSTXBC" or "LSTXBCU19"
    "SSFCOMP_GENERATE_SMART_FORM"
or
"SAPLSTXBC" "ERROR"
or
"RS_TESTFRAME_CALL " "ERROR"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
    (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

RunTime Error while saving a Sales Order

Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
          select * from (t681-kotab) appending table <cond_tab>
                 up to 1 rows
                 where kappl = se_kappl
                 and   kschl = se_kschl
                 and   datbi >= se_date
                 and   datab <= se_date
                 and   (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
Pavan

Hi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji

Runtime error smartform

Similar Messages

Maybe you are looking for