Runtime error TSV_TNEW_PAGE_ALLOC_FAILED on executing FAGLL03.
Hi expert,
I am getting Runtime error TSV_TNEW_PAGE_ALLOC_FAILED error while executing FAGLL03.
Please do the neeful.
extented memeory--4,186,112
and Heap Memory---1,960,171
is configured.
Os--HP-UX
ECC 6.0 with oracle 10g
server has 12 GB of RAM for the application instance and db instance is other server.
Please
Regards,
vivek
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 5720752
Extended memory (EM)........... 502780800
Assigned memory (HEAP)......... 0
Short area..................... " "
Paging area.................... 122880
Maximum address space.......... 4294967295
and the paramters are.
em/initial_size_MB---4092
abap/heap_area_total---2000000000
Please do the neeful.
Similar Messages
-
Runtime errors: TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
When I am trying to check the consistency of background jobs in SM65, It is throwig a runtime error TSV_TNEW_PAGE_ALLOC_FAILED. Kindly look into the below text message from ST22.
ShrtText
No storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
Error analysis
The internal table "IT_18" could not be enlarged further. To allow
error handling, the table had to be deleted before this log was
created. So, if you branch to the ABAP debugger from the display
of this log, the table will there be displayed with 0 rows.
At the moment of the termination, the following data was
determined for the respective internal table:
Storage location: "Session memory"
Row width: 1296
Number of rows: 1166120
Allocated rows: 1166120
Newly requested rows: 8 (in 1 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server ord-sapprd_PRD_00 on host ord-sapprd (wp 0)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1878
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 1709536
Extended memory (EM)........... 408685712
Assigned memory (HEAP)......... 1190561024
Short area..................... " "
Paging area.................... 57344
Maximum address space.......... " "
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"TSV_TNEW_PAGE_ALLOC_FAILED" C
"SAPLSBPT" or "LSBPTFXX"
"DO_TBTCO_CONSISTENCY_CHECK"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "ord-sapprd"
Network address.......... "10.31.18.27"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "16x Intel 80158"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Kindly suggest me the options ASAP as this is happened in the production system.
Thanks in advance,
Suneetha ReddyHi Sunnetha,
SM65 is a resource hungry tcode, and always suggested to run during a off-business hours. Try to run when there is not much acvitity going on in the system.
I'm not very much sure, but please check how many entries there in TBTCO table. as the dump gives indication of
DO_TBTCO_CONSISTENCY_CHECK.
Check RSBTCDEL(2) program is running daily or not. This runs as a background job to delete the old job information from the tables TBTC*. If this has not run, then you can run and delete older job logs and then retry.
Which system you're using? ECC or BW??
Note - parameter settings of BW largely varies from that of a ECC system.
Thanks,
Debasis. -
Handle Runtime error: TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
In my programme, some times I end up with handling of lots of data in internal table. And this results in a dump.
Category ABAP Server Resource Shortage
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more memory available to extend an internal table.
I read few threads where they suggested to increase the internal memory of ths system. This is beyond my scope!
Is there anyway I can catch this exception and stop the programme from executing further?
Thanks in advance!
Cheers
KiranHello Kiran,
TSV_TNEW_PAGE_ALLOC_FAILED is a not catchable error. It happens if a program exceeds the system boundaries, typically ~2 GB. Requesting so much memory is a strong indication for a flaw in the archtecture.
Anyway these kind of errors require a change in the program or in the arguments given to them. In newer releases you may try S_MEMORY_INSPECTOR to analyse the endless need of memory. In older releases watch out for hughe internal tables in the ST22 dump.
Regards
Klaus -
Infoset query: Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Hi
I have searched the forum and could not find suitable solution for my problem.
We have an infoset query whose data source is an ABAP program and this is within our BW system only. Earlier it used to run perfectly fine. Recently, due to the increasing data, the load for the same is failing because of memory issue with runtime Error TSV_TNEW_PAGE_ALLOC_FAILED . The dump occurs within 5-7 minutes of the data load. Once, we give some more filter selections in the infopackage, it runs fine.
Our problem is neither we can increase the memory any further nor we want to give filter selections in the infopackage. Also, once we execute the ABAP program alone, it runs fine.
Any help to solve this problem is appreciated.
Cheers
ChandaHi,
There are 3 ways to avoid this kind of problem:
1) Reduce the data set - if it is possible to process this in smaller
chunks then please do. This is an infoset query - please be more restrictive in your selections
- please refer to note 354657.
When you work with infosets that use tables or joins then it is
possible to read packages (from Rel. 6.10 on). When you work with
infosets that use logical databases or data retrieval programs than
it is not possible to read packaged - by technical restrictions.
That means that the query is executed completely taking all restrictions
into account and the result is stored internally.
2) Re-allocate some of the unused shared memories to program memory.
A prime candidate for this is Roll and Page "In Memory" values.
Alternative memory management via PHYSMEMSIZE generally overallocates
roll and page memory. Please reduce the amounts allocated to the "in
memory" part (see ST02) using the parameters below, for instance:
rdisp/ROLL_MAXFS....Total amt of ROLL (Filesystem+SHM); in 8KB blocks
rdisp/ROLL_SHM......Shared memory element of Roll; in 8KB blocks
rdisp/PG_MAXFS......Total amt of Page (Filesystem+SHM); in 8KB blocks
rdisp/PG_SHM........Shared memory element of Roll; in 8KB blocks
=>Filsystem amt = MAXFS - SHM
60MB or so each in memory should be sufficient.
This should allow an extra 260Mb or so for process memory.
Bear in mind however that Roll_SHM MUST be greater than 10% of
Roll_MAXFS.
This will not affect alternative memory management operation in any way.
3) Reduce the em/global_area_MB from 128 to 64MB.
These measures should give you ~320MB additionally per work process.
To get even more - if there is a 64 bit machine in the landscape then
redirect the load there.
I would like for you to review the SAP Note 712664. Although
the Notes 20527, 369726 and 166551 specifically refers to this
and has helped resolve multiple performance problems.
I hope it can help you.
Fran. -
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED during extraction
Hi,
Anyone knows what the solution is to this problem:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
|Short text |
| No more storage space available for extending an internal table. |
|What happened? |
| You attempted to extend an internal table, but the required space was |
| not available
|Error analysis |
| The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could |
| not be further extended. To enable |
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 1908 |
| Number of rows: 35912 |
| Allocated rows: 35912 |
| Newly requested rows: 8 (in 1 blocks) |
| Last error logged in SAP kernel |
| |
| Component............ "EM" |
| Place................ "xxx" |
| Version.............. 37 |
| Error code........... 7 |
| Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV " |
| Description.......... " " |
| System call.......... " " |
| Module............... "emxx.c" |
| Line................. 1897 |
| |
| The error reported by the operating system is: |
| Error number..... " " |
| Error text....... " " |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 6221152 |
| Extended memory (EM)........... 1826778184 |
| Assigned memory (HEAP)......... 2000035456 |
| Short area..................... " " |
| Paging area.................... 73728 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_PAGE_ALLOC_FAILED" " " |
| "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36" |
| "FILL_BILLPLAN" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table
|What happened?
| You attempted to extend an internal table, but the required space was
| not available.
|Error analysis |
| The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could
| not be further extended. To enable
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 1908 |
| Number of rows: 35912 |
| Allocated rows: 35912 |
| Newly requested rows: 8 (in 1 blocks) |
| Last error logged in SAP kernel |
| |
| Component............ "EM" |
| Place................ "SAP-Server XXXX" |
| Version.............. 37 |
| Error code........... 7 |
| Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV " |
| Description.......... " " |
| System call.......... " " |
| Module............... "emxx.c" |
| Line................. 1897 |
| |
| The error reported by the operating system is: |
| Error number..... " " |
| Error text....... " " |
| |
| |
| |
| |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 6221152 |
| Extended memory (EM)........... 1826778184 |
| Assigned memory (HEAP)......... 2000035456 |
| Short area..................... " " |
| Paging area.................... 73728 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_PAGE_ALLOC_FAILED" " " |
| "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36" |
| "FILL_BILLPLAN" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| | -
Report MB5L giving runtime error TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
While running the Report MB5L we are getting the runtime
error "TSV_TNEW_PAGE_ALLOC_FAILED"
We tried to schedule this report at non-peak hours but it again got
terminated with same error.
We are using 12GB of RAM.
ztta/roll_area 6500000
ztta/roll_extension 4000317440
abap/heap_area_total 3001024512
abap/heap_area_dia: 5000683008
abap/heap_area_nondia: 2000000000
em/initial_size_MB: 8192
Please find the attached screenshot of ST22 dump analysis.
Regards,
Prashant
Edited by: Prashant Shukla on Feb 25, 2009 11:10 AMHi Juan,
Pls find the details below-:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 24.02.2009 23:31:32
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
If the error persists, ask your system administrator to check the
following profile parameters:
Error analysis
The internal table "\FUNCTION=MBEW_EXTEND\DATA=SEARCH_MBEWH_TAB[]" could not be
further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 372
Number of rows: 354608
Allocated rows: 354608
Newly requested rows: 32 (in 1 blocks)
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 6203136
Extended memory (EM)........... 4001304840
Assigned memory (HEAP)......... 2000059568
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... 18446697160833538863
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLMG27" or "LMG27F02"
"SEARCH_EXIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ecprdciclu"
Network address...... "172.25.1.34"
Operating system..... "Linux"
Release.............. "2.6.18-53.el5"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 19
Shortdump setting.... "full"
Database server... "isrecprdb2"
Database type..... "ORACLE"
Database name..... "RPD"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 20:45:39"
create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 185
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 6203136
EM...... 4001304840
Heap.... 2000059568
Page.... 32768
MM Used. 5803144952
MM Free. 199241240
User and Transaction
Client.............. 610
User................ "SANCHIT"
Language key........ "E"
Transaction......... " "
Transactions ID..... "49A289F286FA2313E1000000AC190122"
Program............. "SAPLMG27"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "SAPLMG27" - in "SEARCH_EXIT".
The main program was "RM07MBST ".
In the source code you have the termination point in line 558
of the (Include) program "LMG27F02".
The program "SAPLMG27" was started as a background job.
Job Name....... "RM07MBST"
Regards,
Prashant -
Runtime Error TSV_TNEW_PAGE_ALLOC_FAILED
Hello friends,
One of our Z-transactions (run in background) terminates with the runtime error TSV_TNEW_PAGE_ALLOC_FAILED. It runs successfully in another system. Of course memory settings are different in these systems so are the resources. I see in the affected system that parameter abap/heap_area_total is 2GB and parameters abap/heap_area_dia and abap/heap_area_nondia are only allocated 10MB each. Will there be any issue if we increase the above 2 parameters to 2GB each? If we do so, is the value allocated entirely at startup? Will it affect system performance? Please help.
Thanks,
Atul Lotlikar.Hi Atul,
You can extend abap/heap_area_dia and abap/heap_area_nondia to 2GB without any problem. 10MB was limitation for 32-bit AIX system. It only gets activated at the start up.
However, you might want to have a look at em/initial_size_MB and ztta/roll_extension and try to increase them in the system where the problem is occurring.
Also, two systems can have different amount of data volume which can explain why it runs in one system but not in other. Then you probably have to have a look at the Z-program itself.
Hope it helps.
Cheers !!
Satya.
PS: pls reward points if the answer was helpful...Thx. -
Runtime Errors: CONVT_OVERFLOW while executing transaction sm66
Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 02.04.2011 00:41:01
Short text
Overflow when converting from "2.90113e+09"
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "2.90113e+09",
an overflow occurred.
There is probably an error in the program
"SAPLTHFB".
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
The main program was "SAPMSM66 ".
In the source code you have the termination point in line 82
of the (Include) program "LTHFBU26".
The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
occurred in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLTHFB "; its source code begins in line
1 of the (Include program "LTHFBU26 ".Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 02.04.2011 00:41:01
Short text
Overflow when converting from "2.90113e+09"
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "2.90113e+09",
an overflow occurred.
There is probably an error in the program
"SAPLTHFB".
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
The main program was "SAPMSM66 ".
In the source code you have the termination point in line 82
of the (Include) program "LTHFBU26".
The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
occurred in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLTHFB "; its source code begins in line
1 of the (Include program "LTHFBU26 ". -
Runtime Error Getting While Executing Transaction ME47.
Hi Exports,
i am facing a problem in transaction ME47 For Maintaing Quotation.
if i enter RFQ Number and exceute, i am getting Runtime Error. This is happening in only in Test Server. Development and production it is working fine.
Error Details are given below.
ShrtText
Screen does not exist
What happened?
Error in ABAP application program.
The current ABAP program "SAPLXM06" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
The program had to be terminated.
Error analysis
Program "SAPLXM06" tried to use screen 0301.
The screen does not exist.
Trigger Location of Runtime Error
Program SAPLXM06
Include MM06EO0C_CUSTSCR1_HEAD_SET_DAT
Row 10
Module type (FUNCTION)
Module Name EXIT_SAPLEINM_013
Source Code Extract
Line SourceCde
1 ----
2 * MODULE CUSTSCR1_HEAD_SET_DATA OUTPUT *
3 ----
4 * ........ *
5 ----
6 MODULE CUSTSCR1_HEAD_SET_DATA OUTPUT.
7
8 PERFORM CUSTSCR1_HEAD_SET_DATA_PBO using fc_call.
9
>>>>> ENDMODULE.
Thanks,
Satheesh.This apepars to be customer code (exit). Have you verified that the programs, objects involved are identical in Test, Dev and Prod? Checked the transport logs to Test?
-
Runtime error "DATA_INCONS_IN_EXIT_MANAGEM" while executing a BADI
Hi Experts,
I am trying to use a BADI in my report Program.
But it is throwing a runtime error "DATA_INCONS_IN_EXIT_MANAGEM".
I debugged the program and found that the call to the GET_INSTANCE method of Class CL_EXITHANDLER is raising this error.
It is because the instance parameter is Initial.
Can you please let me know, what is the mistake i am doing.
My report code is as follows:
*& Report Z_GKR_BADI_01
REPORT z_gkr_badi_01.
CLASS cl_exithandler DEFINITION LOAD.
DATA: l_badi_instance TYPE REF TO zif_ex_gkr_matnrdata, "BADI Interface
mara LIKE mara.
PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY.
START-OF-SELECTION.
CALL METHOD cl_exithandler=>get_instance
EXPORTING
exit_name = 'ZGKR_MATNRDATA' "BADI Definition Name
null_instance_accepted = 'X'
CHANGING
instance = l_badi_instance.
CALL METHOD l_badi_instance->get_materials
EXPORTING
matnr = p_matnr
IMPORTING
mara = mara.
WRITE: /5 mara-matnr,
mara-matkl,
mara-meins.
Cheers
Gaurav RaghavHi lakshmi,
I am new to BADI and i am doing a tutorial.
The Complete Code is given with at the thread starting.
In the Interface method i am retreiving Material details from the table MARA based on MATNR.
The code is as follows:
*& Report Z_GKR_BADI_01
REPORT z_gkr_badi_01.
CLASS cl_exithandler DEFINITION LOAD.
DATA: l_badi_instance TYPE REF TO zif_ex_gkr_matnrdata,
mara LIKE mara.
PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY.
START-OF-SELECTION.
CALL METHOD cl_exithandler=>get_instance
EXPORTING
exit_name = 'ZGKR_MATNRDATA'
null_instance_accepted = 'X'
CHANGING
instance = l_badi_instance.
CALL METHOD l_badi_instance->get_materials
EXPORTING
matnr = p_matnr
IMPORTING
mara = mara.
WRITE: /5 mara-matnr,
mara-matkl,
mara-meins.
Interface Method Implementaion in BADI
METHOD zif_ex_gkr_matnrdata~get_materials.
IF NOT matnr IS INITIAL.
SELECT SINGLE *
FROM mara
INTO mara
WHERE matnr = matnr.
ENDIF.
ENDMETHOD.
I checked and i didn't find the entry in the table mentioned by you.
But isnt the entry supposed to come automatically once i define the BADI.
The BADI Definition name is ZGKR_MATNRDATA.
Please help me regarding the same. -
Runtime Error: TSV_TNEW_PAGE_ALLOC_FAILED during ODS Activation
Hi,
I have nearly 120Million records in new data of an ODS, When I am trying to activate I am getting this error message.
What could be the solution to activate this.
Regards,
TonyHi Tony,
you need to check the dump together with a basis person to increase some parameter in order to have more memory available for the process. Another solution might be to do a partial activation of the data. But this one does only work if you have more than one request to activate.
regards
Siggi -
TSV_TNEW_PAGE_ALLOC_FAILED error while executing FAGLL03
Dear Experts,
We are on AIX, Oracle 10g and ECC 6.0
One of our FI consultant is trying to execute a report using the standard T-Code: FAGLL03 for a range of 1 year, but when she executes this she gets the following dump (runtime error)
TSV_TNEW_PAGE_ALLOC_FAILED
So on working on this error i found that we need to set few abap parameters, for which i have done the following parameter settings..
rsdb/ntab/ftabsize 41000
Previous Value: 30000
rsdb/ntab/entrycount 25000
Previous Value:20000
abap/buffersize 900000
Previous Value: 400000
rsdb/cua/buffersize 9000
Previous Value: 5000
zcsa/presentation_buffer_area 8388608
Previous Value:8388608
zcsa/table_buffer_area 41943040
Previous Value:41943040
rtbb/buffer_length 25000
Previous Value:20000
rsdb/obj/buffersize 25000
Previous Value: 4096
abap/heap_area_dia: 3000000000
Previous Value: 2000000000
abap/heap_area_nondia: 0
Previous Value: 2000000000
abap/heap_area_total: 5000000000
Previous Value: 2000000000
After doing these chnages and there was a problem restarting the server, and then i made changes to the abap/buffersize parameter from 900000 to 600000 and then 500000 but the server never restarted.
So finally i have copied the instance profile which was earlier backed up back into the profile folder and the restarted the server which is working fine now.
Now my question is can any one plese help with the best settings so that i can resolve the FI issue and restart my server without any problems.
Reward points for sure.
Awaiting for your quick reply
Thanks in Advance
Regards
HarryHi,
I suggest you to follow below SAP Notes:
#146289 Parameter recommendations for 64-bits SAP Kernel
#425207 SAP memory management, current parameter ranges
#153641 Swap Space requirement for R.3 64-bits kernel
you should have at least 20GB swap space configured, at least 8GB RAM configured
On heap parameter:
abap/heap_area_nondia: 0
Previous Value: 2000000000
why you configure zero ? please maintain at 2GB
abap/buffersize is a very sensitve parameter. simply increasing it will end up in system emergency mode with PXA shared memory dump.
if you are running windows, then please activate ZAMM.
If you are running AIX, i suggest you to look into SAP Note 789477.
cheers,
Vincent -
Runtime error while executing Tcode FAGLL03
Hello experts
we have 2 clients in PRD
100,200
In 100 if i execute the tcode FAGLL03 it is showing the line items within 100 sec.
where as in 200 if i execute FAGLL03 it is showing runtime error.
if this executed in background it takes 1300 sec and finished successfully.
From basis perspective what would be the issue.
Regards
RaviHello srini
Thanks for ur input
Details
Recording at local and central time........................ 06.05.2009 14:03:30
Task................ 07522 / Dialog work process No. 00
User................ DEVAKUMAR
Client.............. 200
Terminal............ H2SBASIS
Session............. 1
Transaction code.... FAGLL03
Program name........ FAGL_ACCOUNT_ITEMS_GL
Problem class....... T Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abinit
Line................ 1890
Error text.......... ab_chstat
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. TIME_OUT
Technical details
File................ 000989
Position............ 0000261540
Entry type.......... l ( Error (Module, Row) )
Message ID.......... AB 0
Variable parts...... ab_chstat abinit 1890
this is the log got from SM21.
The runtime error is time out error
Regards
Ravi -
Runtime Errors STORAGE_PARAMETERS_WRONG_SET
Hi,
My functional team had run customized program in dialog, but after few minutes the error occured as below:-
Runtime Errors STORAGE_PARAMETERS_WRONG_SET
What happened?
The current program had to be terminated because of an
error when installing the R/3 System.
The program had already requested 344148608 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia
to a maximum of 344148608. Then reduce the value by 10.000.000 to be on the
safe side.
Then restart the SAP System.
SAP Release.............. "620"
Application server.......
Network address..........
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "8x Intel 80686"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 15
Short dump setting....... "full"
Database server..........
Database type............ "MSSQL"
Database name............ "PRD"
Database owner........... "prd"
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Then we try run in background job, but error occurred show as below:-
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Occurred on 25.03.2010 at 16:51:02
No storage space available for extending the internal table.
What happened?
You attempted to extend an internal table, but the required space wa
not available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and admini
termination messages, especially those beyond their normal deletion
date.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum addr
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
I had check parameter value in RZ10 and below is the result:-
1.abap/heap_area_dia = 2000683008
2.abap/heap_area_dia = 2000683008
3. ztta/roll_area = 2000896
4.ztta/roll_extension = 2000683008
5.abap/heap_area_total = 2000683008
6.em/initial_size_MB = 20000
I need advice on this.
Thank you
Regards,
Anang78
Edited by: anang78 on Mar 25, 2010 10:14 AMHi,
Your customized program execution is demanding more heap memory. It may be pointing to memory re-configuration.
Please refer the following SAP Notes and compare your exiting memory parameter settings and do the adjustment according to the available RAM.
[SAP Note 425207 - SAP memory management, current parameter ranges|https://service.sap.com/sap/support/notes/425207]
[SAP Note 88416 - Zero administration memory management as of 4.0A/ Windows|https://service.sap.com/sap/support/notes/88416]
Also analyze the execution of that Customized Program, weather the Coding is optimized, weather the program is executing any Expensive SQL Statement or not.
Refer SAP Note 129813, one alternative is mentioned to deal with this memory related issue by activating 3GB feature in your existing Windows OS. Please refer Microsoft KB article 283037 and KB 268363 for the same. You will have to edit your boot.ini file to append /PAE switch.
Regards,
Bhavik G. Shroff -
Run time error (short dump) executing program SCAN_BW_REFERENCES in SE80
Hi experts,
I am not an ABAPer, or Basis person, rather a hybrid functional/technical Key User for our Business Warehouse system (BW 3.5, Netweaver 2004). We have a user who cannot save BW reports to his favorites and he is getting a number of error messages. OSS note 887002 seems to address this and indicates that I should run program SCAN_BW_REFERENCES from transaction SE80. The program is supposed to perform the checks for BW objects assigned to the Favorites and identify situations causing terminations in BW frontend applications. I have attempted to execute this program on several occassions and always get run-time errors (short dumps). Here is the error:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 2008.09.17 19:00:49
ShrtText
No storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
I have been informed by our Basis group that I have reached a memory limit, but they will not extend the memory paramters. Any ideas on a work-a-round or a way to minimize the number of records this program is pulling in, in an attempt to get it to run?
Thanks,
HCHi,
The only response I got from Basis was that they would not extend the memory parameters because they are for all users in the system. Not sure what that means.
The full dump is too large to paste here. I think what I will do is to see if our ABAPers can create a modified version of this program to include selection by user. Typically it is for only one user that I need to run the program, and that surely would fall within the space requirements.
Thanks for your answer.
//HC
Maybe you are looking for
-
HELP: Problem creating a new database in Oracle 9i
I am having difficulty in creating a new database in Oracle 9i, on Windows 2000. I would be obliged if somebody can go through the posting below and guide me as to what mistake I am making or what is the source of the problem: I reproduce the steps t
-
Where is photo stream in icloud?
When I log into my icloud account there is not an icon for photostream. I have my iphone set to backup photos to photostream but I cannot find how to access them in icloud. Also, my phone has the find my iphone app all of the correct settings are ena
-
TS3694 Getting error 1644 when trying to restore a backup... suggestions?
Been trying to get the phone operational. Have been getting robo text from verizon. Verizon suppor suggested wiping phone clean and starting again. wiping works fine.... restoring not so much Gett 1644 with resore. Still getting flipping robo tex
-
Part 1 generated while creating migo but display mode Excise tab not appear
Hi I created migo Part 1 generated. and excise tab also appeared. but while display mode Excise tab not appearing. In table J_1part1 Part 1 details are updated. Please explain What could be the reason Regards sitaram
-
All updates for iTunes and iPhone are hanging
Trying to update iTunes and iPhone but everytime I do the downloads stall and hang and I have to cancel and restart my computer. ALL other downloads happen just fine without any stall. I have Windows 7. I have tried changing my firewall settings or a