Runtime Error-UNCAUGHT_EXCEPTION CX_RSR_X_MESSAGE
Hi All,
I am getting below runtime error when I am trying to load data from a flat file to Infocube.I am on Bi 7.0 and it is a totally new server.
Error message:
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 82
of the (Include) program "LRRMSU13".
Please tell me what could be the issue.Is it related to some patch issue???
Regards,
Kshitij
Are you trying this load manually or through process chain?
if process chain , the file should be placed in application server.
chk if the file is closed b4 triggering the infopack.
try loading other flat file load for different datasource and chk.
Ramesh
Similar Messages
-
Business content error UNCAUGHT_EXCEPTION CX_RSR_X_MESSAGE
Hi all,
I am on 7.0 and when I install Business content I get the following dump.
Also when I monitor my job it in the job log I can see " The object is not allowed to be empty" coming up several times and then just abruptly dumps.
I have checked the notes and forums but nothing matches to my problem...also we understand that we are on a low SP package 10 which I guess is the big problem.
Any advice,
DUMP:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RSR_X_MESSAGE
Date and Time 08.12.2008 15:05:52
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.Hi
Did you resolve this issue. Because we are facing the same problem. wheniam now installing demo content.
Thanks -
Hi Gurus: Need yoyur help to resolve the loading issue (Data Mart)
Scenario:
Loading data from BW layer to BI layer - Cube to Cube loading of data.
Data loaded in DW layer cube with no issues. However, gives the following error when loading to
BI layer cube (It is 1:1 mapping excpt for couple of convesrion routines on satndard objects such
as Material Division, periods and Unit).
Message:
*Runtime Errors UNCAUGHT_EXCEPTION*
*Exception CX_RSR_X_MESSAGE*
This happens in Program - 'SAPLRRMS'; Include -"LRRMSU13"
What happened?
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along the calhierarchy Since exceptions represent error situations and this error was
not adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
We are aware of the following 2 OSS notes reference:
855424 - Error in Formula Compiler
872193 - Run Time Error 'UNCAUGHT_EXCEPTION' during upload
Any other solution for this? please let me know.
Thanks.......SMaalyaplease replicate DM system.
-- sameer -
Hi ,
When i tried to load data into my standard cube the following short dump error occure.
The data was updated to PSA but while updating to further data target (my standard cube) the following error occured:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_COB_PRO_NOT_FOUND
Date and Time 2010.12.13 10:20:48
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RSR_COB_PRO_NOT_FOUND' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSR========================CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_COB_PRO_NOT_FOUND', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
0REQUEST is not a valid characteristic for InfoProviderPlease check the infoobject 0REQUEST, whether it is in active state, if not acivate it.
Check for 0REQUEST Object in Infocube level at characteristics tab, if it is not available try to add this characteristic to cube.
if 0REQUEST is not available, install it from the content and include it in the cube.
rgds, Ghuru -
Runtime Error : UNCAUGHT_EXCEPTION
Hi Solman Experts,
While downloading softwares through Maintenace Optimizer ( Solution Manager ),I am getting below error..
First Error :
Function module /SDF/AL_MAP_TRANSID_LOGH does not exist.
The Maintenance Optimizer can automatically determine which files you require to update the ABAP and Java software components of your systems.
The search is performed for all instances of the selected systems flagged as relevant.
I have already checked in service market place and apply the SAP note 1135893 and we have activate the some components (BC Set)
See Note 898614 after that i am getting big problem.
Second Error : ( ABAP Dump )
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_SOCM_NOT_IMPLEMENTED
Date and Time 31.03.2008 15:04:31
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_SOCM_NOT_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_CHM1_CHANGE_REQU_INSTANCE==CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_SOCM_NOT_IMPLEMENTED', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
An exception occurred
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
*"UNCAUGHT_EXCEPTION" "CX_SOCM_NOT_IMPLEMENTED"
"CL_CHM1_CHANGE_REQU_INSTANCE==CP" or "CL_CHM1_CHANGE_REQU_INSTANCE==CM009"
"IF_EX_SOCM_CHECK_CONDITION~CHECK_CONDITION"*
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ALBE0510"
Network address...... "10.201.180.10"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "ALBE0510"
Database type..... "MSSQL"
Database name..... "SP0"
Database user ID.. "sp0"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 00:33:51"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 133
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 41898400
Heap.... 0
Page.... 40960
MM Used. 33604960
MM Free. 4099184
User and Transaction
Client.............. 001
User................ "KONS222"
Language key........ "E"
Transaction......... "DSWP "
Transactions ID..... "AE21FFDCBA44F199AB15005056836080"
Program............. "CL_CHM1_CHANGE_REQU_INSTANCE==CP"
Screen.............. "RDSMOP_MAIN 0100"
Screen line......... 5
Information on where terminated
Termination occurred in the ABAP program "CL_CHM1_CHANGE_REQU_INSTANCE==CP" -
in "IF_EX_SOCM_CHECK_CONDITION~CHECK_CONDITION".
The main program was "RDSMOP_MAIN ".
In the source code you have the termination point in line 612
of the (Include) program "CL_CHM1_CHANGE_REQU_INSTANCE==CM009".
Source Code Extract
Line
SourceCde
582
conditions_ok = cl_socm_integration=>false.
583
ENDIF.
584
ENDIF.
585
586
WHEN 'S_USER_CHECK'.
587
conditions_ok = cl_socm_integration=>true.
588
CALL METHOD cl_sm_base_sender=>get_assigned_suser
589
EXPORTING
590
i_no_dialogue = 'X'
591
IMPORTING
592
e_suser = e_suser
593
e_partner_no = lv_parnr
594
EXCEPTIONS
595
no_user_assigned = 1
596
no_customer_number = 2
597
OTHERS = 3.
598
IF sy-subrc = 1 OR sy-subrc = 3.
599
conditions_ok = cl_socm_integration=>false.
600
ENDIF.
601
WHEN 'NO_CRTCL_OBJ'.
602
conditions_ok = me->check_crtcl_obj( ).
603
WHEN '0NO'.
604
conditions_ok = cl_socm_integration=>false.
605
WHEN '0YES'.
606
conditions_ok = cl_socm_integration=>true.
607
WHEN '0BREAK'.
608
BREAK-POINT. "#EC NOBREAK
609
WHEN space.
610
avoid exception since it is the default in table TSOCM_COND_MAPP
611
WHEN OTHERS.
>>>>>
RAISE EXCEPTION TYPE cx_socm_not_implemented.
613
ENDCASE.
614
615
ENDMETHOD.
Please suggest. Thanks in Advance...
Regards,
Suresh KumarHi Ruben,
I have Implemented both notes now i am getting differt error...
Error is : Error No customer numbers in transaction AISUSER ...
Message Number: SOLMAN_SAP_BACKEND016
Diagnosis
There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
System Response
You cannot get customer number-specific RFC destinations.
Procedure
Maintain these entries manually or start the report
SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.
Please suggest..
Thanks in Advance..
Regards,
Suresh Kumar
Edited by: suresh k on Apr 15, 2008 3:15 PM -
Job DIM_OBSERVER is getting canceled with with a runtime error UNCAUGHT_EXCEPTION
Dear Experts,
Job DIM_OBSERVER is getting canceled with with a runtime error UNCAUGHT_EXCEPTION. Below are the details of runtime error.
Category
ABAP Programming Error
Runtime Errors
UNCAUGHT_EXCEPTION
Except.
CX_UJA_ADMIN_ERROR
ABAP Program
CL_UJA_MD_QUERY_OPT===========CP
Application Component EPM-BPC-NW-ADM
Date and Time
02.08.2014 23:35:46
I am unable to find related note and solution for the same. any help would be much appreciated.
Thanks,
Akbar.Hi Akbar,
I believe this issue is coming up in BPC.
But could you please provide some more detailed information like when exactly(after performing which step) is this error occurring?
BR
Prabhith -
Runtime Errors UNCAUGHT_EXCEPTION
Hi All,
while activating DSO the backgroung job getting cancelled with Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_SDB_ORA_PROGRAM_ERROR.
and the status of the request is in green.
my system service pack level is .
SP LEVEL IS 17
and the job log is as below.
Job started
Step 001 started (program RSODSACT1, variant &0000000000019, user ID HPDEV0105)
Activation is running: Data target ZDATSTOR, from 197 to 197
Overlapping check with archived data areas for InfoProvider ZDATSTOR
Data to be activated successfully checked against archiving objects
ABAP/4 processor: UNCAUGHT_EXCEPTION
Job cancelled .
could you please suggest me the solution for the above issue.
Thanks & regards
YogeeHi Yogeeraj,
Check below SAP note
SAP note No: 1152831
Thanks,
Vijay. -
Could not activate InfoObject (Runtime Error = UNCAUGHT_EXCEPTION)
Dear Experts,
I got stuck on activating an existing InfoObject-A after changing one attribute.
Situation
- there was no data in the InfoObject at all.
- change attribute from InfoObject-B1 to InfoObject-B2
- activate InfoObject-A
- got short dump
Short dump detail
- Runtime Error = UNCAUGHT_EXCEPTION (An exception that could not be caught occurred.)
- Except. = CX_SY_SQL_ERROR
- What happened?
The exception 'CX_SY_SQL_ERROR' was raised but was not caught at any stage in the call hierarchy.
Since exceptions represent error situations, and since the system could not react adequately to this error, the current program, 'RSDRS_MSSQL_ROUTINES', had to be terminated.
Any suggestion for resolving this case would be appreciated.
Thank you very much.
-WJ-Hi,
try to activate the infoobject with following program using transaction SE38:
RSDG_IOBJ_ACTIVATE
Hope you will get solution to your problem -
I am currently working on Bi 7. I am trying to delete master data from infoobject
0RPM_IDGU, but when i try saving the saving Infoobject after delting the data, it gives me following error.
<b>Runtime Errors UNCAUGHT_EXCEPTION
Exception : CX_SDB_ORA_PROGRAM_ERROR</b>
Please help.Hi,
here some notes: https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=998904&_NLANG=EN
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=975948&_NLANG=EN
If they don't help, raise a message at http://www.service.sap.com
regards
Siggi -
Runtime Error "UNCAUGHT_EXCEPTION" in &VIEW_ELEMENT_TYPE
Hello,
I got a big problem, when I by accident configered with sap-config-mode the FITE_EXPENSES-application's LAYOUT_VIEW. I entered text in the Width-field and saved the configuration. The application run into the error in program CX_WDR_ADAPTER_EXCEPTION======CP. This is the note:
"Adapter error in &VIEW_ELEMENT_TYPE& "FORWARD_TOP" of view "FITV_FPM.LAYOUT_VIEW": The CS length specification in property "IFUR_NW5_BUTTON~WIDTH" contains invalid characters"
So, how to reset or correct the configuration setting, when aplication crashes every time I start it.
Seppo>
Seppo Somppi wrote:
> Hello,
>
> I got a big problem, when I by accident configered with sap-config-mode the FITE_EXPENSES-application's LAYOUT_VIEW. I entered text in the Width-field and saved the configuration. The application run into the error in program CX_WDR_ADAPTER_EXCEPTION======CP. This is the note:
> "Adapter error in &VIEW_ELEMENT_TYPE& "FORWARD_TOP" of view "FITV_FPM.LAYOUT_VIEW": The CS length specification in property "IFUR_NW5_BUTTON~WIDTH" contains invalid characters"
> So, how to reset or correct the configuration setting, when aplication crashes every time I start it.
>
> Seppo
Hi,
Go the the layout of the view LAYOUT_VIEW of your component. Try to delete the text from the property 'WIDTH' of the element in the view.
Let me know if that works.
Regards
Prasenjit -
Runtime error on BI Dev (UNCAUGHT_EXCEPTION)
Hi Team,
We are getting time error pn BI DEV . please check the below log .
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE
Date and Time 28.02.2012 11:50:17
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"
SAP-Release 701
Application server... "pssapsbx"
Network address...... "10.10.32.114"
Operating system..... "AIX"
Release.............. "6.1"
Hardware type........ "00F6B2C64C00"
Character length.... 8 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "pssapsbx"
Database type..... "ORACLE"
Database name..... "BD3"
Database user ID.. "SAPBP3"
Terminal.......... "inp-260888-1"
Char.set.... "en_US.ISO8859-1"
SAP kernel....... 701
created (date)... "Apr 1 2011 23:57:22"
create on........ "AIX 2 5 00CB5A5B4C00"
Database version. "OCI_102 (10.2.0.4.0) "
Patch level. 137
Kindly suggest , this has to be check by BASIS or BI DEV team.Hi,
About this dump please see the instructions given in the solution
part of note 1157796.
#1157796 - Characteristic 0REQUEST must reference 0REQUID
The root cause could be the missing reference of 0REQUEST to 0REQUID
as mentioned in this note.
In addition to please check Infoobject 0REQUID in transaction RSD5.
Please compare the delivered version with the active version and if
difference exist install the content version again
as it is given in the note.
Thank You.
Regards,
Deepika -
UNCAUGHT_EXCEPTION runtime errors when changing the PO
Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quareHi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_BBP_PD_ABORT
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
caught,
which led to a runtime error.
The reason for this exception is:
Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare -
Hi
We are on BI.7 patch SAPKW70015 BI_CONT 703 - 0007 SAPKIBIIP7 and multi source system BI server. One is for R/3 it is already working and another is for new IS Retail.
While trying to load data to inventory (Z-cube) for first time in production system we get the following error :
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RSR_X_MESSAGE
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 73
of the (Include) program "LRRMSU13".
The program "SAPLRRMS" was started as a background job.
Line SourceCde
43 BREAK-POINT.
44 SET EXTENDED CHECK ON.
45 ENDIF.
46
47 IF i_abend EQ rs_c_false.
48 *... Nachricht an den Message-Handler schicken
49
50 DATA: l_type TYPE smesg-msgty.
51
52 *... S-Meldung wenn kein Handler initialisiert
53 IF g_active IS INITIAL.
54 l_type = 'S'.
55 ELSE.
56 l_type = 'W'.
57 ENDIF.
58
59 CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
60 EXPORTING
61 i_class = 'BRAIN'
62 i_type = l_type
63 i_number = '299'
64 i_msgv1 = i_program
65 i_msgv2 = i_text.
66 ELSE.
67 DATA: l_text TYPE string,
68 l_repid TYPE syrepid.
69
70 l_repid = i_program.
71 l_text = i_text.
72
>>>>> RAISE EXCEPTION TYPE cx_rsr_x_message
74 EXPORTING text = l_text
75 program = l_repid.
76 ENDIF.
77
78 ENDFUNCTION.
The other data loads are working fine in the production system.
We searched a lot on the forum and got various solutions But none of them are working fine for us.
Please suggest.
Thanks you for your help.
Ramana PAre you trying this load manually or through process chain?
if process chain , the file should be placed in application server.
chk if the file is closed b4 triggering the infopack.
try loading other flat file load for different datasource and chk.
Ramesh -
Runtime Error...Any Solution
Hi all,
I am trying to laod a flat file in BI 7.0 with the following short dump.
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RSR_X_MESSAGE
Date and Time 04.02.2007 01:13:2
What happened?
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Missing Handling of Application Exception
Program RSAWBN_START
Any solution.
ThanksHi,
But I dont have any access to get hold of that note.
Thanks
Message was edited by:
J B -
Webdynpro application runtime error CX_FQDN
Hi experts,
I am encountering following error when running a sample webdynpor application from SE80. I have included details of my Hosts file entries and profile parameter in the details below.
My SAP system is installed on my desktop computer as a standalone on a wrkgroup. Name of the host is 'ecc6'.
Step by step instructions preferably with some example will be greatly appreciated.
Thanks in advance. AP
What has happened?
The URL http://ecc6:8006/sap/bc/webdynpro/sap/z_tutorial_1 was not called due to an error.
Note
The following error text was processed in the system ECC : Die URL enthält keine vollständige Domainangabe (ecc6 statt ecc6.).
The error occurred on the application server ecc6_ECC_06 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
ST22 dump is:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_FQDN
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_FQDN', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Die URL enthält keine vollständige Domainangabe (ecc6 statt
ecc6.).
System environment
SAP-Release 700
Application server... "ecc6"
Network address...... "192.168.100.1"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "ECC6"
Database type..... "ORACLE"
Database name..... "ECC"
Database user ID.. "SAPSR3"
User and Transaction
Client.............. 001
User................ "SAPUSER"
Language Key........ "E"
Transaction......... " "
Program............. "CX_FQDN=======================CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "192.168.100.1"
Caller Port........... 8006
Universal Resource Id. "/sap/bc/webdynpro/sap/z_tutorial_1"
Information on where terminated
Termination occurred in the ABAP program "CX_FQDN=======================CP" -
in "CHECK".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 10
of the (Include) program "CX_FQDN=======================CM002".
Entries in C:WINDOWSsystem32driversetchosts
127.0.0.1 localhost
192.168.100.1 ecc6
Instance Profile in SAP transaction RZ10 is ECCDVEBMGS06_ECC6_
Parameter Name Parameter value
login/no_automatic_user_sapstar 0
login/system_client 001
SAPSYSTEMNAME ECC
SAPGLOBALHOST ecc6
SAPSYSTEM 06
INSTANCE_NAME DVEBMGS06
DIR_CT_RUN $(DIR_EXE_ROOT)$(OS_UNICODE)NTI386
DIR_EXECUTABLE $(DIR_INSTANCE)exe
PHYS_MEMSIZE 512
rdisp/wp_no_dia 6
rdisp/wp_no_btc 3
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
rdisp/wp_no_enq 1
rdisp/wp_no_vb 1
rdisp/wp_no_vb2 1
rdisp/wp_no_spo 1
DIR_CLIENT_ORAHOME $(DIR_EXECUTABLE)HI ,
SAP has recommended it like that
for accessing SAP web dynpro abap application you have to give the full FQDN i.e. host name with domain.
simply hostname alone wont work.
http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm
Pls go through the link.This mite help
Thanks,
Aditya.
Maybe you are looking for
-
Move settings from one computer to another
I am migrating to a new computer and want to take some of the custom settings I have made with me. I have already moved the compressor settings. That was easy - I just copied the 'Settings' folder from the library on the old computer to the new one.
-
Dynamic call for records in a table
hI, Im having a ztable, the structure is as follows: tabold fldold tabnew fldnew The records in this table is are: 1.yvbap posnr xvbap posnr 2.yvbak auart xvbak auart 3.yvbak augru xvbak augru. Now, i have to use this table dynamically to check ea
-
Can any one help me in completing the process starting to ending?What is the process?what we need in between i.e from inquiry to payment? pls,i know its a long process but i need only gist that is i dont want any configuration here....? thanx
-
Bookmark folders that I had previously created have disappeared so I can't access any of my bookmarks. The process I used to create new subject bookmarks doesn't seem to be there anymore. The apple support doesnt mention creating new bookmark folders
-
Implementing a data guard on VMs
Hi all, probably this is not the place where I have to post this question, but I need your help about interconnecting two VMs running on separated hosts. My problem is that I can't connect to my VMs (redhat 6.4 32 bit) from a remote host(ping is also