Runtime error when burning blu ray disc

I am attempting to burn a 1080i/29.97 blu ray disc and when it gets to something like 99% finished, i get a runtime error, and then
encore crashes. Could it be there there is not enough space on the disc? The video and audio combine to somthing like 23.5 GB.
Any help would be greatly appreciated.Also, running encore 4.0.

This Adobe KB Article might be able to give you some tips.
Good luck,
Hunt

Similar Messages

Has a stop marker any function when burning blu-ray discs with Premiere Elements 12?

Stop marker when burning blu-ray discs with Pre 12. Does it works?

Amiral
No.
This applies to Premiere Elements any version.
Stop markers placed on the Premiere Elements Timeline destined for burn to Blu-ray disc format on Blu-ray disc are not recognized at playback of that disc using the Blu-ray player.
If you need Blu-ray disc with stop markers, you can export your Premiere Elements Timeline content to an appropriate file type that will be compatible with a 3rd party software which will get the job done. I have heard that a software such as DVD Architect can do that, but I have not been there and done that.
Stop markers function at playback of DVD-VIDEO on DVD disc only. And, never place a stop marker at the end of the last item on that Timeline.
http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7e 19.html
Please do not hesitate to ask if you need clarification on anything written.
Thank you.
ATR
Add On...I have found that the situation is the same for stop markers and AVCHD on DVD and Blu-ray disc format on Blu-ray disc.

"media not present" error when burning blu ray in PE12

I have two systems, both ground-up builds, identical Win 7 Home Premium and Premiere Elements 12 installs. Both systems have internal blu-ray burners. One burner is an ASUS BW-12B1AT and the other is a Pioneer burner (don't recall the model number).
System 1: Intel 4770k with Gigabyte MB
System 2: AMD 8-core with Gigabyte MB
System 1 gives "Media not present" error in PE12 when attempting to burn to blu ray discs using Verbatim discs. System is able to burn DVDs and CDs, and playback blu ray discs. System is also capable of burning blu rays using Nero.
System 2 works fine - blu ray media is recognized instantly by PE12 when in the drive and burns blu rays perfectly.
I swapped the blu ray drives and SATA cables from System 1 and System 2 with the same result - this eliminated the drive manufacturer and cables from being the problem, as both drives worked perfectly in System 2 and neither worked in System 1. I also tried different SATA ports and power supply taps on System 1 without any success.
Then, I noticed that on System 1, with the dialog box open and indicating the "media not present" error, if I ejected the blu ray disc and reinserted it, the burner LED would flash 18 times (approx. 1/sec) and then pulse briefly indicating a burst of activity for about 1 second, as if it was either reading the disc or writing to the SATA. If I pressed the "rescan" button during this brief burst of LED activity, then the disc was recognized and I could proceed to burn it. If I tried to press the rescan button at any time before this instant or after, the "media not present" error did not clear.
To me, this is an indication that something in the handshake timing of the SW and the burner is not correct, and that timing differences in the system HW are not provided for in the SW. I see that many others have had this issue and have had to buy work-around image burners to address this. I believe your burner drivers need to be reworked to eliminate this bug. This is evidenced by the fact that Nero works and your SW does not, and that different systems consistently exhibit this problem.
Please let me know when you will have a SW patch to address this or if you have any idea of system settings that can be adjusted (I don't know of any myself) that would eliminate this problem.

pastrobes
This is not Adobe. Rather user to user. If you want to contact Adobe, your likely route is via Adobe Chat.
If you have a feature request or bug report, then consider filing a Adobe Feature Request Bug Report Forum with Adobe
Adobe - Feature Request/Bug Report Form
The likelihood of an Adobe engineer seeing your thread here is essentially slim to none.
Your results are very interesting but lots more variables to consider.
Do you have any version of Premiere Elements other than 12? It would be interesting to learn if a prior version's burn
dialog would present with the Media Not Preset issue for your burn to Blu-ray System 1. That is easy enough done with a tryout of
11 or 10 or 9 from the following web site. ProDesignTools: Adobe® Developments in Focus
On the other side of the coin, you could give the new version a look in this regard. A new version is expected at the
end of September 2014.
As an aside, have you updated 12 to 12.1 Update, using an opened project's Help Menu/Update. If not, I would encourage
you to do so. It does correct an Expert workspace text styles issue plus other matters undefined by Adobe.
ATR

"Could not create ac3" error when burning Blu-ray

I've spent the last week designing a Blu-ray in Encore CS5. Upon burning, I was given the error message "Cannot create '_sessionfiles_Dsf_session_1_audio.ac3", and the burn failed (after going for seven hours). I really don't even know where to begin with this. The Blu-ray is about 80% full (20 GB) and includes multiple timelines and several menus (one of which has audio). No pop-ups. It should be a fairly straightforward project. However, it's given me problem after problem and has taken way too much time. Can anyone offer insight before I spend another week tracking down the problem? Thanks.

In the last few days, things have gone from bad to great and back to bad, and it's been non-stop work. I freed up a ton of space on the computer and backed it up. Then the computer gave me a kernel panic, which happened so often that I had to restore the whole computer. I don't know if that's related to the Encore issue. Then I tried to burn again, and it seemed to be working until it gave me an error message that said "Blu-ray Error: 'device error', code '3', Note: ". So I looked around online and decided to export as an ISO disc image file. That worked fine. Then I tried burning a Blu-ray using third-party software, which failed halfway through. Next I tried burning using Disc Utility. It got all the way to the end and said "Could not verify" and failed. I tried playing it in my Blu-ray player anyway. For the first time, it actually worked. The movie and the Scene Selection menu work fine. But when I try to go to Special Features, nothing happens. The Blu-ray is supposed to go to the Special Features menu at the end of the main movie, but it just goes to a black screen after that and locks up. Now I'm really lost. Any more suggestions? Thanks.

Device error when burning Blu Ray disk at 96%

Very simple program to use so far. Just drag and drop.
My current project was shot in HD 1080p about 2 hours or 13 gig long and I made 4 lower resolution DVD's no problem. I like how it shrunk it with out me having to do anything other than check the box (use space available)
However when I went to make Blu Rays in addition to taking about 18 hours its gets right to the end and spits the disk out unfinished and has device error at about 96% of burning finished. Disk will not play.
I have ruined 3 blank 4x blu ray disks so far, same result. I have down loaded and installed the 8.01 update, I will turn off the screen saver and anything else I can find, before I try it again.
Its a new computer with only PE8 running on it. Quad core Gateway with 8 gig ram and a almost empty 1tb hard drive and LG blue ray writer.
I have not tried to burn anything else with the blu ray writer, as thats what PE8 was for.
I did not have the timeline fully rendered before I started, if that makes any difference.
Anybody have any ideas.
Thanks in advance.
Philip

Sorry I'm a newby. I'll put this is PRE 8 where it belongs.

Burning blu-ray discs

Here at the office we're running all macs with Final Cut Studio 2. We want to be able to encode for blu-ray and also burn blu-ray discs. I know we need an external burner, but does our current software support blu-ray?

Or Netblender's DoStudio for rather less money. PC based but we successfully run it on a Mac in Bootcamp. Just completed our first full featured Blu Ray and sent for replication.
If you know DVD-SP well then learning curve not too bad and they have very good support and forum.
If you just need to 'dump' hi def material to Blu Ray then FCP and/or Toast may prove to be enough for your needs

BE NICE TO BE ABLE TO BURN BLUE-RAY DISC, I TRIED AT LEAST 3 BURNERS APPROVED BY ADOBE WEBSITE AND IT'S NOT WORKING

BE NICE TO BE ABLE TO BURN BLUE-RAY DISC,
I TRIED AT LEAST 3 BURNERS APPROVED BY ADOBE WEBSITE AND IT'S NOT WORKING...

Maybe the problem is caused by a stuck CAPS LOCK key? 8/

I want to burn blu ray discs from FVPX, compatible mac burner.

I want to burn blu ray discs from FCPX projects. I note I should be able to but any thought on a mac compatible burner. Why is so difficult to find one??

I would recommend navigating to www.macsales.com, because they specialize in Macs they can point you to devices that should work with your computer. Please make sure you also have software for burning Bluray discs, i'd recommend Titanium Toast.

Read/burn Blue Ray discs in MacBook Pro

Does anyone kows if it is possible to read/burn Blue Ray discs in a MacBook Pro (it have a MATSHITA DVD-R UJ-898)? Thank you

No, the superdrive in the macbook pro cannot burn bluray.
There are some external 3rd party bluray players that will work, however consumer level bluray burners are, currently, incredibly unreliable

Does the USB apple SuperDrive allow to burn blu ray disc?

Apple USB SuperDrive support blu ray disc?

No. You have to have an external Blu-ray recorder to burn Blu-ray discs.
OWC have quite a few of them.
Clinton

I keep getting "media not present" when tring to burn blu ray disc using PE 10. This used to work fine. Nothing changed as far as I know

Has any one had this problem?

Karl
Thanks for the reply.
Part 1.
1. Task Manager/Process. If you are seeing the following processes with Premiere Elements 10 closed, then Task Manager/Processes and End Task for each of these processes
that you are seeing there
a. Adobe QT32 Server.exe
and
b. Elements Auto Analyser.exe
Part 2.
a. Open Premiere Elements 10 to the Timeline workspace, go to Help Menu/Deactivate and click on Deactivate. Close out of there.
b. Then, uninstall Premiere Elements 10 via the usual Control Panel route.
c. Do a run through with the free ccleaner (regular cleaner and registry cleaner parts).
CCleaner - Download
d. Reinstall Premiere Elements 10 with antivirus and firewall(s) disabled.
Part 3. ccleaner details.
Cleaner part. This is straight forward. Click on the Cleaner Tab in the left column of the ccleaner dialog and then click on Run Cleaner in the section of the dialog to the right.
Registry part. Click on the Registry Tab in the left column of the ccleaner dialog. Then click on Scan for Issues in the section of the dialog to the right.
After the "Scan for Issues" is completed, you will then see an active "Fix Selected Issues" to the right of "Scan for Issues".
Click on "Fix Selected Issues".
At this point, you will see a pop up dialog
Click Yes to that message and continue to Save the registry backup file to your computer hard drive location of your choice.
Follow the on screen instructions after the save of the registry back up file.
Part 3.
The critical part is that you obtain the Premiere Elements 10 installation files. You already have the purchased serial number. So you should be OK on the serial number side of things.
Download and install the Premiere Elements 10 tryout files appropriate to your computer from the following web site. It is critical that you read and care out word for word the web page's write up for "Note: Very Important Instructions" and use its click "here" as instructed. Otherwise you will get an excess denied message.
Photoshop Elements 10 Direct Download Links: Free Trials, Premiere | ProDesignTools
During the installation of these files to your computer, when asked for, insert your purchased serial number into them.
Make sure that antivirus and firewall(s) are disabled for the download and install.
Comments. There are no guarantees that this will resolve the "No Media Present" for Premiere Elements 10 burn to AVCHD on DVD and Blu-ray disc format on Blu-ray disc. In the end, you may have to look at external burners until you find one that works for you for these burn to choices.
Did any of your computer pre-loaded software come with backup installation files? I suspect not.
Please review the above and then let us know if you need clarification on any of the above. You might want to give more consideration to exploring the external burner possible solution.
Thanks.
ATR

Is my hl-dt-st bddvdrw gbc-h20l capable of burning Blu Ray discs (BD-R)?

Hello. I have a HP Pavilion Elite m9470 Desktop PC with an hl-dt-st bddvdrw gbc-h20l drive running Windows 7 Ultimate (the pc came originally with Vista). For the first time I tried to burn a Blu Ray disc BD-R in fact. When I loaded the disc into tray, the pc started trying to read the disc, without success for endless minutes. In fact the door could not open even manually - I had to restart the system to take the disc out.
I always thought that the specific drive was capable of not only reading but also burning Blu Rays - could someone let me know? Is it a matter of appropriate software?

You're welcome.
Click on support & driver links on the HP site, enter the complete model # of the PC, you will see a links for information pertaining to your PC, like: HP Pavilion Elite m9470gr Desktop PC Product Specifications
Enjoy

How to burn blu ray disc with H264 files and ac3 files?

Hello,
I have tried many times to burn a bluray disc with FCP and compressor and they always end up not successful. After spending days on testing different settings, I finally managed to only get it to work if I tried
1) outputting to Hard drive as opposed to burn to bluray
2) Turning the default bit rate down from 35Mbits to between 15-19Mbits.
Then I used either disk utility or toast to burn the disc image onto the Bluray disc.
I have however on a recent job forgotten to switch the setting on compressor to output to harddisk and instead set it to burn to Blu-ray. Big mistake. Again I end up with a h264 file and an ac3 file, and nothing I can do with them after 24 hours of rendering. Oddly, the compressor says "successful" but nothing is created but that 2 files.
My question is (before I restart the whole 24hr rendering process again) - is there anyone who can help me use the .264 file and the ac3 file and create the blu-ray disc with the menus again without having to re-render all over again? I have not been able to find anyone to provide me with a solution or find any where online that helps with that.
Desperately ...
Yee-wei

Hello,
Sorry but the instructions in the manual (online and offline) do not answer my question. Yes I do have a bluray burner, it is a matsushita BD-MLT SW-5584. I wrote in my post that when I set it to output to HardDrive, it will create a dmg file nicely for me to burn using disk utility or toast.
But when set it to burn to Bluray disc, nothing gets done. I just want to find out, with the h264 file and the ac3 file that gets created in the process of creating the dmg file, can I still burn the disc or create a dmg file from them without having to re-render the whole thing again.
Maybe you never tried burning a Blu-ray disc with FCP or compressor before. Let me explain how it works. When you submit the project to process, it will create 2 files - 1 ac3 audio file and a .264 file. After that 2 files are rendered (which takes 24hrs for my 2hr 30min HD clip), it will use that 2 files to create your Bluray disc or your dmg file. Problem occurs when it doesn't burn the disc and you are left with just the 2 files that cannot be used to burn the project again. My question is : is there anyone who knows how to set the compressor to see that the 2 files are already created and just continue to create a dmg file?
Hope my question is clearer now.

Encore 5.1 on OS 10.5.8 burns Blu-ray discs but crashes on DVD build of same project

I've spent a few weeks creating a dual-layered Blu-ray Disc with 20 menus and 44 timelines ranging in length from 9 seconds to 18 minutes.
The end product will be a dual pack containing both the replicated Blu-ray Disc and DVD.
I pre-transcoded both the BD and DVD and linked the assets appropriately. The Blu-ray Disc builds correctly and seems to not have any issues.
When I try to output to DVD Encore crashes almost immediately. I've also tried to save just a DVD image and it crashes in the same place.
I don't really want to recreate this entire program in DVDSP but that is my plan.
Any other ideas would be appreciated.
Thanks!

So I fixed the issue by deleting all the ac3 and m4v (including the linked m2v) files out of the timlines ans replacing with the orginal Self-Contained Reference Movies from FCP7. Then I let Encore transcode and build overnight, presto in the morning one working DVD.
Now I just need to transcode again for Blu-ray or revert to a backup...

What to pick when inserting Blu ray disc

hi
what should I pick after inserting blu ray disc into drive to write video by compressor?
Ta

Hi
Sorry forgot screen shot.

Runtime error when burning blu ray disc

Similar Messages

Maybe you are looking for