Runtime error when installing reader on vista

I had Reader 7.0.9 on my Vista computer and started getting errors. The box said I needed an update and when I tried to download I got a runtime error no error number. I decided to uninstall 7.0.9 and install the Reader for Vista. When I tried to do so the download would start where the previous download had errors and I would now receive an error. I can't download anything because of this and I know I uninstalled the previous version. Anyone have any ideas?

Hi
Hmmm without the exactly error message its not possible to say what could be wrong.
I assume you have a clean Vista installation on your notebook and also the BIOS was updated.
If not, do it!

Similar Messages

HT4759 getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc

getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

C++ Runtime Error when installing addons

Hi everyone,
I get this error when trying to install or start any addon: Microsoft Visual C++ Runtime Library. Runtime Error! Program: C:\Program Files\SAP\SAP Business One\SAP Business One.exe. Abnormal program termination. And SAP Business One quits.
I've already reinstalled SQL Server, DotNet framwork 1.1 and 2.0, and SAP business One. Tried to start with anti-virus disabled, but error persisted.
This error appears on a windows 2003 server, and on all workstations within the domain.
I am totally out of options left to get this fixed. Anyone has a clue for me?
Thanks,
Andy

Refer: SAP Note Number 819501 that explains How to clean client after corrupt installation of add-on(s)
Read the note and understand whether any of the symptoms are mathcing with your problem, If Yes, follow the instructions as per the note.
Along with the above, Try this thread and guidelines - Microsoft C++ Run Time Error (This thread is not yet marked as answered)
Re: Microsoft C++ Run Time Error
If the thread helps you Thanks to Lucas and Tim.
Extract from the thread,
>> refer to note#808354, https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000808354
>> In addition to Lucas suggestion, there is another SAP Note 852031 following above Note 808354. Try the suggested work around in this Note only after going over Note 808354. The work around is good for cases where more than one UI versions ar registered at the same time.
>> https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000852031
Good Luck
Regards
Satish

Error when installing Reader

Hello, I get an error when I try to install Adobe reader:
the instruction at "0x00430887" reference memeory at "0x000000010". the memory could not be read. click ok to terminate or cancel to debug.
I'm running XP professional, sp2. I origianlly was getting an error when trying to open a pdf file so I uninstalled. I'm not aware of anything changing that would cause this.

What version of Adobe Reader are you trying to install?
Are you using the download manager (online installation), or a downloaded installer, e.g. from http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/AdbeRdr930_en_US.exe

Runtime Error when installing the German Photoshop trial

hi,
when I try to install the German Photoshop trial I get a "Laufzeitfehler: Objekt erwartet Zeile 31" (Runtime Error: object expected line 31) after initialisation of the installation program. When opening the Script Debugger it points to a file main.html in Common Files\Adobe/\Installers\...\resources. The Debugger stops at the line: "body onload="AhmbedGUIWorkflow()" id="standardBody"" (without quotation marks). What can I do to avoid this error and install the trial?
Thank you for a fast answer.
Kind regards
PT

Well, what browsers do you use and what version of Java? Also do not forget, that it is not advised to have any Java-dependant app open during installs, including browsers or Adobe Media Player. In any case, I would simply uninstall Java (all versions, including all updates), manually clean out all Java caches (Dokumente und Einstellungen/Peregrin/Anwendungsdaten/Sun/Java,Dokumente und Einstellungen/Peregrin/Lokale Einstellungen/Anwendungsdaten/Sun/Java,Dokumente und Einstellungen/All Users/Anwendungsdaten/Sun/Java,Dokumente und Einstellungen/Peregrin/Lokale Einstellungen/Temp), download the latest version and install with a clean slate. This might bring you back on track, as it should set any bent VM settings back to their defaults.
Mylenium

Runtime Error when installing Adobe Creative Suite 5.5 Production Premium

I am trying to install Adobe Creative Suite 5.5 Production Premium, but I keep getting a 'Runtime Error!': This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
What should I do? Any help greatly appreciated! I am running Win 7, Service Pack 1, 64 bit.

We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
Mylenium

Error when installing itunes to vista

near the end of the installation i get an error message saying:
"An error occured during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type=" 32" ,publiceKeyToken+"1fc8b3b9a1e18e3b"'process or Architecture="x86"'. Please refer to Help and Support for more information. HRESULT: 0x80073712."
what do i do?

HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up +en passant.+
Go into your Windows update and try to check for new updates. Do they fail to install? If so, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712s, or a different error code? If they're different, what codes are you getting in Windows Update?

RunTime Error when installing extensions

I recently purchased CartWeaver. I also recently had to
purchase a new computer. My CW ran on WINXP w/o a problem, but
Gates has a monopoly going and my new computer has Win Vista. Now I
can't install my CW. CW support said I had to check with Adobe
because there is a possibility that the entire EXTENSION MANAGER is
not compatible with Vista! HOW CAN THAT BE!??? If I can't install
extensions, I can't use DW at all. And I am using Studio 8.
I really hope ADOBE gets their act together, because this is
a MAJOR PROBLEM as all PCs are not running Vista -- Sony, HP, etc.
Adobe needs to make their products compatible!
PJ Kinann
[email protected]

No, your statement is inaccurate and very misleading. Just
the opposite.
Adobe System does a very good job working and developing
all-across-the-board applications all across the board, all kinds
of platforms (Mac, Windows XP (prior to MS release of MS Vista) and
other OS).
That is to say, it took Microsoft, I believe slightly more
than 5 years trying to develop and build so-called next generation
OS now what is called MS Vista. The product itself is not 100
perfect, and still is having problems with security issues. Sadly,
in fact, Microsoft likes to claim that Vista is far more secure
system architecture in Microsoft history. But the question, why it
took them so long time to develop operating system.
Average lifespan of product development usually takes 18
months or develop to new product usually every 18 months. Microsoft
took more than five years to do just that only one product: Vista
more than five years. Even then, Microsoft have thousands of
programmers and so-called system engineers work and build Vista.
On other side of coin, if you take a look at Apple Inc, they
release pretty much faster and develop and release next versions of
Mac OS X usually every 18 months, and usually continue to fine-tune
OSX within few months. And if there is a known bug problem, they
work on their ***** and work around the clock and FIX the problem
very fast. Microsoft are dealing with thousands of bug problems and
trying to fight aganist hackers every day regularly.
So, you accuse Adobe of doing this lousy job, you make a big
mistake. Go figure.
quote:
Originally posted by:
pjkinann
I really hope ADOBE gets their act together, because this is
a MAJOR PROBLEM as all PCs are not running Vista -- Sony, HP, etc.
Adobe needs to make their products compatible!
PJ Kinann
[email protected]

Installing my updated CS4 on a new I Mac: "legacy Java SE 6 runtime" error when i try to open psd

Bought the original Creative Suite package 1n 2004, installed on my new apple G5. Upgraded in 2009 to CS4 and sometime installed on a 2nd computer. I'm sure I registered each product. I don't have the original disk's, but I have the serial number. I'm trying to install CS on my new I Mac. It fails authorization in the download. I went ahead and downloaded the 30 day trail like suggested. I get the "legacy Java SE 6 runtime" error when i try to open psd. After my first attempt failed and I read the help lessons on deactivation, I believe I have deactivated from the G5, but I'm still getting the same code when trying to open psd.

Download and install: Java for OS X 2014-001
Reboot your Mac.
Let me know how it goes.
Gene

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Getting error code 150110 when installing Reader on Win7 and there is plenty of disk space. Help!

getting error code 150110 when installing Reader on Win7 and there is plenty of disk space. Help!

Hi pat27,
Are you still facing this issue?
Do you have any previous version of Reader installed, if yes and it is 9 or above. Uninstall that using Adobe Reader cleaner tool: http://labs.adobe.com/downloads/acrobatcleaner.html
Once that is uninstalled restart your machine and try install again.
Also you may try to create a new user profile with Admin rights and try to install again.
- How to create new user profile:: Fix a corrupted user profile - Windows Help
Regards,
Ajlan Huda

Runtime Error when starting Lightroom

I'm currently on day 12 or so of my trial with Lightroom. I've spent quite a few hours getting to know LR by retouching and cataloging over 8 years of photos. So far, aside from a few in-program bugs that I found a way to work around, I've been super-happy with it (especially the powerful keywording/metatagging system: amazing!) and have been really seriously coughing up the huge wad of $$ when the trial's done. But....
For no reason, LR started giving me a Runtime Error when I tried to start it. Something along the lines of "This application requested Runtime to terminate it unusually."
So off to Google I went, where I knew I could probably search that error and fix it like I've done with countless other programs. Unfortunately nothing is working.
Here are the facts:
--I'm running a fully patched Vista machine.
--LR worked fine earlier this morning. I had 1.4 and didn't perform any upgrades or maintenance to it (that I know of) when it just gave me the error out of the blue today when I tried to start it.
--I tried holding CTRL when I start it, and it still gives the error.
--I tried deleting a .lock file (which did exist) but it still wouldn't start.
--I tried running the "repair" tool in the install...no good.
--I uninstalled LR, d/led it again, and re-installed it. IT WORKED!....one time. I was able to run it, checked to make sure my cataloging was still intact (it was - phew!) and even deleted a folder I didn't want in it. Then I closed it. I tried re-opening it a few hours later and I got the SAME ERROR!
I sure hope someone can help because I'm at my wit's end.

This is disgusting. I've pounded away for over 4 hours and I finally found a workaround. Here's the original post that had my answer:
http://www.adobeforums.com/webx/.3c05ac2f
The short of the story: if I put lightroom.exe into Windows XP compatibility mode" it will work. (To do that, for anyone else who comes across this, you just right-click your lightroom icon, click PROPERTIES, and go to the Compatibility tab and check the box next to "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 2)")
I've loaded it up half a dozen times and it's still working perfectly as far as I can tell. Hopefully it won't hurt anything keeping it in that mode.
I'm glad this happened early enough into my trial that I'll have ample opportunity to see if it repeats itself. I'm not keen on sinking $300 into software that will give me ulcers as I troubleshoot problems like this.

Runtime error when syncing P1i with PC

I get a runtime error when syncing my P1i to PC. The error is linked with this file, 'dxp syncml.exe', and the application is said to request the 'Runtime to terminate it in an unusual way'. How do you fix this?

Thanks Joanne. Let me give you feedback on whats happening so far.
After some doing, I discovered that my firewall is controlled by Norton Firewall Provider. (Bear in mind I am a novice in terms of managing these computer protocols). To modify the firewall settings, Norton calls this in their the control panel 'Smart firewall', I go to program control then configure. A list of programs came up with the options to add, modify, remove or rename. I searched the list and found that DXP SyncML.exe and mRouterRuntime.exe were listed and set to 'Auto' in the Access column. I noticed that under access, the options include auto, allow, block and custom. I reasoned that 'allow' is the highest level of access, and to support the sync feature, I changed the status to 'allow' from 'auto' for the DXP SyncML and mRouterRuntime executable files. If you believe it is ok and safer to keep the auto status, advise me.
I did not find in the listing any of these programs; Bearer Abstraction Layer (SCBAL.exe), Generic Device Management Executable (Generic.exe) or Symbian Connect Object Model for Symbian Connect QI (SymbianConnectRuntime.exe).I did a search and located the generic.exe and the other two files under 'common files' in 'teleca shared' folder, and 'symbian' in 'shared' and 'symbianconnectruntime', respectively.
Norton's control panel for Smart Firewall gave me three options when adding programs: allow, block and manual configure internet settings. The last of the three was recommended by Norton. However, I selected 'allow' for the generic.exe, symbianconnectruntim.exe and scba.exe.Please advise if you believe I need to modify the terms I entered to set up this procedure (is there a better setting that allow me to achieve the same level of functionality without compromising my security?)
Now Joanne, whats left is for me to try the sync after making these changes. I feel as if I accomplished a lot by only reaching this far. I will have to do a reinstallation of the SE PC Suite before moving on though. Let me explain.
When the sync failed repatedly because of the unexpected termination linked with the dxp syncml.exe, I uninstalled the SE PC Suite which was done from a disc, and installed a version from the Sony website. That version is 1.6.0, with a copyright date of 2006. With this, the sync worked. By the way I am using Windows 7 Starter. Now what I am going to do later is uninstall this version of the suite, and reinstall the one from the disc that was linked with the problem we are solving. When I do that later, I will give you feedback.
Just in case you are wondering, I have a vested interest in using the PC Suite from the disc. This application works fine for the file manager component where the drive on the phone and removable media card are read. In the 1.6.0 version, I cannot get the file manager to see the phone as connected though when I put the card (is that called M2 disc?) in the phone, it reads. So, I although sync is working with the 1.6.0 version from the website, I want to use the version I have on disc if the sync component gets over the problem we are trying to solve.
Hope I am on the right track so far I thank you profusely for your patience and dealing with my qeurry; the solution will make a world of a difference for me and many other P1i owners. Look foward to the follow up
Rohan Bell

ISScript error when installing Palm Desktop

I am recieving the following error when installing palm desktop for a z22:
"1:The InstallScript engine is missing from this machine. If availible, please run ISScript.msi, or contact your support personal for further assistance,"
I know the setup app uses ISScript 11 so I have downloaded and installed it, but it is failing still. Does anyone have other suggestions?
some other info:
Platform: Windows XP Pro
Thanks in advance.
Paul
Post relates to: Zire

follow the steps provided. this is related to your problem.
Error - 1607: Unable to Install InstallShield Scripting Run Time
Update to the Latest InstallShield Installation Engines
http://knowledge.macrovision.com/selfservice/viewContent.do?externalId=Q108322&sliceId=1
When running into installation issues, it is always recommended that you use the latest InstallShield installation engines. This article contains steps on how to download and install the latest InstallShield engines for the installation version you are trying to install.
What to do?
Follow the Troubleshooting steps below:
Determine if the installation is compressed or uncompressed.
Launch Windows Explorer by pressing the Windows key + E or select Start > Run and type explorer.
Browse to the location of the installation files. For example, if the installation is on a CD, browse to the CD-ROM drive.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc.
If the installation file is the only file in the directory (a single installation file), continue with the remaining suggestions in Step 1. Otherwise, if there are other files in the same directory as the installation file, continue to Step 2.
When a single installation file is run, it uncompresses the installation files into a temporary location (usually the Temp directory). Use these steps to find the installation in the temporary location:
Start the single installation file, but do not continue or cancel the installation dialogs.
Browse to the Temp directory. For further information on how to find the Temp directory, see Clean the Temp Directory.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. The uncompressed installation file should contain other files in the same directory. Continue with step 2.
Right-click on the installation file that you are trying to install and select Properties.
In the Properties dialog, click on the Version tab.
Look at the File Version field to determine the version number of the InstallShield engine you need. Follow the instructions for your version. If you started the installation in Step 1d, cancel it.
If the file version number is 2.0x or less:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 6:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 7:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\7 from the machine.
Download ISScript7.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the ISScript engine for the version of the setup.
If No:
If the file version is less the 7.01
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0700 from the machine.
Download InstallShieldEngineUpdate700.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 7.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0701 from the machine.
Download InstallShieldEngineUpdate701.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 8:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\8 from the machine.
Download ISScript8.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript8.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 9:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\9 from the machine.
Download ISScript9.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\00 from the machine.
Download InstallShieldEngineUpdate900.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\01 from the machine.
Download InstallShieldEngineUpdate901.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 9.5:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 10:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\00 from the machine.
Download InstallShieldEngineUpdate1000.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\01 from the machine.
Download InstallShieldEngineUpdate1001.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 10.5:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\1050 from the machine.
Download ISScript1050.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\50 from the machine.
Download InstallShieldEngineUpdate1050.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 11:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\11 from the machine.
Download ISScript11.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\11\00 from the machine.
Download InstallShieldEngineUpdate1100.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
Post relates to: Treo 680 (Unlocked GSM)

Portal runtime error when trying to create new Iviews in EP

Hi
Require an Urgent help
getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView in portal.
It was working before please see this error message
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Error occurs during the rendering of jsp component.
Exception id: 05:20_12/01/08_0004_17115850
See the details for the exception ID in the log file
AM Iworking on NW2004s sp11. I was able to create iViews on this system before
let me know where to check the log file also. Points will be awarded
Thank you
Krishna Kanth
Edited by: siddi siddi on Jan 13, 2008 12:05 AM

Krishna Kanth,
logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
prachi

Runtime error when installing reader on vista

Similar Messages

Maybe you are looking for