Runtime error when running Init Infopack or delta infopack

Dear All,
I am getting following error when trying to init infopack
Runtime Errors         MESSAGE_TYPE_X
Message class....... "RSM"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Program                                 SAPLRSS1
Include                                 LRSS1F11
Row                                     1,543
Module type                             (FORM)
Module Name                             RSM1_CHECK_FOR_DELTAUPD
And this is happening only with one particular infopack of billing item extractor.
Please help for the same.
Regards,
SS

Hi,
Can you just give more explanation on what you are trying to do, like conditions.
Are doing first time init.
Reg
Pra

Similar Messages

Runtime error when running Authoware session in Vista

Hi
One of our users has reported to a error when running an
authorware session in Vista:
"I get the message when trying to open the session...
It says:
Authorware runtime does not work anymore.."
Any ideas why this user is getting this problem?
thanks
Jon

I can assure of one thing.. there is no such message anywhere
in the
product. You should get the actual message from your user and
let us know
what it is.
Mike
====================
Mike Baker
Adobe Community Expert
mike-baker at cox dot net
"webacity" <[email protected]> wrote in
message
news:gfuorj$ebe$[email protected]..
> Hi
>
> One of our users has reported to a error when running an
authorware
> session in
> Vista:
>
> "I get the message when trying to open the session...
>
> It says:
>
> Authorware runtime does not work anymore.."
>
> Any ideas why this user is getting this problem?
>
> thanks
> Jon
>

Runtime Error, when running midlet.

I can build the midlet without problems. This error occurs when the emultator starts the midlet. I can se the phone for a sec or two then i turns of and the error occurs in the console.
I am using, j2me, eclipse, eclipseme, cldc1.1,mipd2.2.
Running with storage root DefaultColorPhone
java.lang.ClassNotFoundException
     at com.sun.midp.midlet.MIDletState.createMIDlet(+14)
     at com.sun.midp.midlet.Scheduler.schedule(+52)
     at com.sun.midp.main.Main.runLocalClass(+28)
     at com.sun.midp.main.Main.main(+116)
Execution completed.
705709 bytecodes executed
5 thread switches
739 classes in the system (including system classes)
3582 dynamic objects allocated (97424 bytes)
1 garbage collections (0 bytes collected)
I am not sure about whats wrong. Isn't is supposed to be a class name the exception. like this.
java.lang.ClassNotFoundException. xxxxxxxxxxxxx
So i know in what class the exception occurs.??
Anyhow, anyone that has any clue what could be wrong?
Seems to be an error with the emulator not with the build priocess.
I get the same error while triyng to run it with ktoolbar.
thnx

I can assure of one thing.. there is no such message anywhere
in the
product. You should get the actual message from your user and
let us know
what it is.
Mike
====================
Mike Baker
Adobe Community Expert
mike-baker at cox dot net
"webacity" <[email protected]> wrote in
message
news:gfuorj$ebe$[email protected]..
> Hi
>
> One of our users has reported to a error when running an
authorware
> session in
> Vista:
>
> "I get the message when trying to open the session...
>
> It says:
>
> Authorware runtime does not work anymore.."
>
> Any ideas why this user is getting this problem?
>
> thanks
> Jon
>

Runtime error when running sample program VS8, occi10

Please, help!
When running a sample program (VS2005 v8, oraocci10.lib, oraocci10.dll, both downloaded from the recommended Oracle site http://www.oracle.com/technology/tech/oci/occi/occidownloads.html for Oracle release 10.2.0.3.0 )
I receive the following runtime error:
R6034 An application has made an attempt to load the C runtime library incorrectly.
When I build the program with VS 7 or VS 7.1 libraries, I receive env->CreateConnection error

Hi,
Can you just give more explanation on what you are trying to do, like conditions.
Are doing first time init.
Reg
Pra

NO DATA error when running init load with 2LIS_11_VAHDR

hi experts,
I try to load initial data with 2LIS_11_VAHDR
the steps I did:
1. 2LIS_11_VAHDR is activated in R/3 Log.Cockpit LBWE
2. 2LIS_11_VAHDR is replacated in BW
3. Setup tables are filled for SD Sales Orders in R/3
4. testing 2LIS_11_VAHDR with RSA7 in R/3 delivers 981 records
when I start the info package with "Initialize delta process with Data Transfer" the error occurs "0 Records - NO DATA"
Any Idea what I'm doing wrong?
Best Regards
neven

Hi,
Go to bd87 transaction and see any yellow requests..If so select it and process manually.
or
In the monitor Environment->Transactional RFC -> in the source system.
Then give user id and pwd for source system and try to execute...see if any LUWs are pending and process them.

Getting a runtime error when running the test project

I was running a test project which did execute without any problems. Then I added 2 extra DLLs and wrote some code as well. After that I got the below specified run time error. Though I removed those DLLs and new code still it doesn't run. This was running
fine though. Please advice.
Warning: Test Run deployment issue: The assembly or module 'Npgsql' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
Warning: Test Run deployment issue: The assembly or module 'IBM.Data.DB2' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
Warning: Test Run deployment issue: The assembly or module 'Oracle.DataAccess' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
mayooran99

@Mayooran99,
I agree with Andy. By the way, when you build a new test project and if you want to add dll to your project, please make sure you will follow this article:
https://msdn.microsoft.com/en-us/library/wkze6zky.aspx
When you use Add reference dialog please don't forget to set copy local to true.(By default I think new project will not have this problem, the reason may like Andy mentioned that you still have some references to those two dlls when you removed them)Best
regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Runtime error when running report ZATB

The report is getting timeout (exceed the current setting of 600 secs).Pls specify the selection criteria like customer account (sold to), sales office of the payer, sales group of the payer etc for faster generation of report. Incase of any further clarification revert back with selection criteria used for the report.
Is it a performace issue or functional issue?
Thanks
Arun Paliwal

Hi Arun,
Simple the report need more time to process the information, 600 seconds is quite a short time I'll increase it to 900 to 1200 seconds, for this change parameter rdisp/max_wprun_time (Value in seconds)in order to accomodate the amount of time the report need to finish.
Also you can shrink the scope of the report.
Regards
Juan
Please reward with points if helpful

Error when running RSSB_GENERATE_AUTHORIZATIONS

Iam having a SYSTEM_NO_TASK_STORAGE runtime Error when running program RSSB_GENERATE_AUTHORIZATIONS in a BW 3.5 system when it is attempting to load a very large amount of users/profiles from HR Structural Authorizations into BW. The HR Structural Authorizations - Values 0PA_DS02 ODS was loaded with 47 million records when following the process specified on <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e1cba990-0201-0010-43ae-af579aee7a73">this SDN document.</a>
Memory parameters have been continually adjusted to try to allow the process to run with no results.
Any help will be greatly appreciated.
Thanks.

Hi,
Did you try and break up the loads into smaller chunks ?
Else you can also try and increase the number of data packets by breaking up the data packets into smaller amount if data.
Cheers,
Kedar

Runtime error when i try to execute this program

I get a runtime error when i run this file using appletviewer. Please help me in getting out of this problem.
The runtime errror is:
C:\prashanth>appletviewer HelloMedia.java
java.lang.NoClassDefFoundError: javax/media/ControllerListener
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:11
1)
at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:142)
at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:108)
at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:373)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:579)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:515)
at sun.applet.AppletPanel.run(AppletPanel.java:293)
at java.lang.Thread.run(Thread.java:484)
The code is :
<applet code=HelloMedia.class width=500 height=400>
<param name=FILE value="globe.avi">
</applet>
import java.applet.*;
import java.awt.*;
import java.net.*;
import javax.media.*;
public class HelloMedia extends Applet implements ControllerListener
Player player;
public void init()
setLayout(new BorderLayout());
String mediaFile = getParameter("FILE");
try
URL mediaURL = new URL(getDocumentBase(), mediaFile);
player = Manager.createPlayer(mediaURL);
catch(Exception e)
System.err.println("Exception : " + e);
player.addControllerListener(this);
public synchronized void controllerUpdate(ControllerEvent event)
if(event instanceof RealizeCompleteEvent)
Component compVisual = player.getVisualComponent();
Component compControl = player.getControlPanelComponent();
if(compVisual != null)
add("Center", compVisual);
if(compControl != null)
add("South", compControl);
validate();
public void start()
player.start();
public void stop()
player.stop();
player.deallocate();
public void destroy()
player.close();

My classpath has the following value
.;.;.;C:\PROGRA~1\JMF21~1.1\lib\sound.jar;C:\PROGRA~1\JMF21~1.1\lib\jmf.jar;C:\Program Files\CosmoSoftware\CosmoPlayer\npcosmop211.zip;%systemroot%\java\classes;.;
Please help me out.
Prashanth

ADT packaging with native extensions : permission denied error when running remote build.

Hi Team,
We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
ant -Djava.awt.headless=true -f build.xml buildPackage
When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
Can anybody please help how to get rid of this issue for nightly build using adt,jar?
Here is the error from build log:
buildiOSPackageWithNativeExtensionMac:
     [echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
     [java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
     [java] at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     [java] at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
     [java] at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
     [java] at java.lang.Runtime.loadLibrary0(Runtime.java:823)
     [java] at java.lang.System.loadLibrary(System.java:1045)
     [java] at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
     [java] at java.security.AccessController.doPrivileged(Native Method)
     [java] at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
     [java] at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
     [java] at java.awt.Dimension.<clinit>(Dimension.java:70)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
     [java] at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
     [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
     [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
     [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
     [java] at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
     [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
     [java] at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
     [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
     [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
     [java] at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
     [java] at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
     [java] at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
     [java] at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
     [java] at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
     [java] at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
     [java] at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
     [java] at com.adobe.air.ADT.run(ADT.java:414)
     [java] at com.adobe.air.ADT.main(ADT.java:464)
Thanks,
Swathi.

Note: Before the above error that were two other errors .
1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
2) The build complained that dx could not be found.
The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out.

Error when running the ant task

Hi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java]      at java.lang.Win32Process.create(Native Method)
[java]      at java.lang.Win32Process.<init>(Win32Process.java:66)
[java]      at java.lang.Runtime.execInternal(Native Method)
[java]      at java.lang.Runtime.exec(Runtime.java:566)
[java]      at java.lang.Runtime.exec(Runtime.java:491)
[java]      at java.lang.Runtime.exec(Runtime.java:457)
[java]      at weblogic.utils.Executable.exec(Executable.java:227)
[java]      at weblogic.utils.Executable.exec(Executable.java:156)
[java]      at weblogic.utils.Executable.exec(Executable.java:142)
[java]      at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java]      at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java]      at weblogic.ejbc20.runBody(ejbc20.java:517)
[java]      at weblogic.utils.compiler.T

Hi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java]      at java.lang.Win32Process.create(Native Method)
[java]      at java.lang.Win32Process.<init>(Win32Process.java:66)
[java]      at java.lang.Runtime.execInternal(Native Method)
[java]      at java.lang.Runtime.exec(Runtime.java:566)
[java]      at java.lang.Runtime.exec(Runtime.java:491)
[java]      at java.lang.Runtime.exec(Runtime.java:457)
[java]      at weblogic.utils.Executable.exec(Executable.java:227)
[java]      at weblogic.utils.Executable.exec(Executable.java:156)
[java]      at weblogic.utils.Executable.exec(Executable.java:142)
[java]      at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java]      at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java]      at weblogic.ejbc20.runBody(ejbc20.java:517)
[java]      at weblogic.utils.compiler.T

Runtime Error when starting Lightroom

I'm currently on day 12 or so of my trial with Lightroom. I've spent quite a few hours getting to know LR by retouching and cataloging over 8 years of photos. So far, aside from a few in-program bugs that I found a way to work around, I've been super-happy with it (especially the powerful keywording/metatagging system: amazing!) and have been really seriously coughing up the huge wad of $$ when the trial's done. But....
For no reason, LR started giving me a Runtime Error when I tried to start it. Something along the lines of "This application requested Runtime to terminate it unusually."
So off to Google I went, where I knew I could probably search that error and fix it like I've done with countless other programs. Unfortunately nothing is working.
Here are the facts:
--I'm running a fully patched Vista machine.
--LR worked fine earlier this morning. I had 1.4 and didn't perform any upgrades or maintenance to it (that I know of) when it just gave me the error out of the blue today when I tried to start it.
--I tried holding CTRL when I start it, and it still gives the error.
--I tried deleting a .lock file (which did exist) but it still wouldn't start.
--I tried running the "repair" tool in the install...no good.
--I uninstalled LR, d/led it again, and re-installed it. IT WORKED!....one time. I was able to run it, checked to make sure my cataloging was still intact (it was - phew!) and even deleted a folder I didn't want in it. Then I closed it. I tried re-opening it a few hours later and I got the SAME ERROR!
I sure hope someone can help because I'm at my wit's end.

This is disgusting. I've pounded away for over 4 hours and I finally found a workaround. Here's the original post that had my answer:
http://www.adobeforums.com/webx/.3c05ac2f
The short of the story: if I put lightroom.exe into Windows XP compatibility mode" it will work. (To do that, for anyone else who comes across this, you just right-click your lightroom icon, click PROPERTIES, and go to the Compatibility tab and check the box next to "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 2)")
I've loaded it up half a dozen times and it's still working perfectly as far as I can tell. Hopefully it won't hurt anything keeping it in that mode.
I'm glad this happened early enough into my trial that I'll have ample opportunity to see if it repeats itself. I'm not keen on sinking $300 into software that will give me ulcers as I troubleshoot problems like this.

Runtime Error when creating a new group

I'm getting a runtime error when creating a new group on a site collection?
Thanks in advance

The most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
Also Ensure the group name is not having any special/unsupported characters.
Feel free to share the error screenshot/entry in the ULS logs.
Please remember to click 'Mark as Answer' on the answer if it helps you
Best Regards,
Pavan Kumar Sapara
s p kumar

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

ORA-04062 error when running forms with different users

ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;

Runtime error when running Init Infopack or delta infopack

Similar Messages

Maybe you are looking for