Runtime error when Upgrading from 8.81 pl05 to 8.81 pl08

Hello experts,
When upgrading 8.81 PL05 to 8.81 PL08, I encounter a runtime error concerning a Microsoft C++ Runtime Library. the text in the error box is "Runtime Error ! Program : D... R6025 -pure virtual function call. "
This error occured after the database check, the server tools and the common data base upgrades have already succeded. So at the end of the  production database upgrade after each the databases have been upgraded, at the precise moment of Cost Center upgrades the upon descipted error occurs.
What could be the origin of this error ? What should I do in order to upgrades in PL08 ?
Thanks in advance for your answers.
Sébastien TABORE

Hello
I have the same issue and i would try with the possible solution but the link doesn´t exists anymore.
I received the same Error  (Run Time Error program R-6025 pre virtual
function call.) At the moment it appears only when i make a search e.g. for the todays Outgoing Payments (around 60 registers) on the OVPM table.
But i'm affraid that could be appear more often or inside another transaction like invoices or sales order which are very important to us.
SAP Business One 8.81 PL 11
Regards,
Angie I.

Similar Messages

  • Runtime Error when upgrading to LR 1.3

    Take care: there is still a bug in LR 1.3 that leads to a runtime error after installing the new version.
    This occurs when the catalog file ist not at it's default place (in my case on an external drive).
    Unfortunately LR seems not to remember the location of the catalog in 1.2, instead it tries to load the catalog from the default location when starting 1.3 and crashes. This bug is not new, it still existed in earlier versions.
    Solution:
    Hold CTRL when first starting LR 1.3 and select the right catalog.

    I ran into the same problem with 8.1.2.0 to 9.2.0.0
    on AIX with IBM java 5.
    Any resolution yet?
    Thanks

  • XLR run-time error when upgrading from 2007A PL 39 to PL 42

    My client recently upgraded from 2007A PL 39 to Pl 42, In PL 39, everything, including XLR, was running smoothly. Mow when client tried to open SBO, he gets this message:
    XL Reporter
    Run-time error u2018430u2019:
    Class does not support Automation or does not support expected interface
    The client has uninstalled and re-installed mythe client software, but gets the same error.
    Any suggestions?

    Hi Katie,
    this error can occur with a DIAPI version mis-match. Again note 1247315 should help you in this regard, as there are steps there to follow.
    If the note doesn't help, you could also set the logging level to 6 which would provide more information:
    a. Locate the following key in the registry:                            
       My computer\HKey_Current_User\software\SAP\SAPManage\SAP Business   One\AddOn                                                                               
    b. Double click on logging level and enter value 6                                                                               
    c. Start XLR                                                            
    Please send the log in SAP Business One Log folder from                 
    Start->Run->%type%, you'll find log called SAPAddOn_01.log       
    Kind Regards,
    Lilian Lynch
    SAP Business One Forums Team

  • Error when upgrading from SQL Server 2005 to SQL Server 2014

    Hello everyone,
    Could you help me, i have an error when i try to upgrade my SQL Server 2005 Enterprise Edition to SQL Server 2014 Enterprise Edition,
    All of prerequisits are available and i dont have a problem,
    before the end of migration process, i have this error: The group name could not be found (0x84BB0001)
    File log:
    Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
    command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x84BB0001
      Error description:             The group name could not be found.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
      Feature:                       Full-Text and Semantic Extractions for Search
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
    command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x84BB0001
      Error description:             The group name could not be found.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
    command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x84BB0001
      Error description:             The group name could not be found.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
    Best regards,
    Guiga Hafedh

    There are more detailed logs for the various components. The one of interesting is the one for the engine or possibly the one for full-text.
    These logs are extremely verbose, and the errors are rarely crystal clear, but at least give them a try. If you have problems, find a place to upload them (Dropbox, Skrydrive etc), so that we can look.
    The closest at hand is that "group" that cannot be found is an AD group.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Portal Runtime Error when browsing from a tab to another in the portal

    Hi,
    I have the following error that occurs sometimes, and not each time in my portal:
    Portal Runtime Error
    An exception occurred while processing your request
    Exception id: 04:12_24/02/09_2214_104648850
    See the details for the exception ID in the log file.
    I have checked the log file and this is what it says:
    #1.5 #001E4F33123E016B0000000700000E44000463AB8B9BBED0#1235488339787#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Guest#0##n/a##4af00e2001dd11debdfb001e4f33123e#Thread[PRT-Async 198,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception ID:04:12_24/02/09_2214_104648850
    [EXCEPTION]                                                                                     
    {0}#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Resource
    Component : pcd:portal_content/novacapen/desk_novacap_en/frameworkPages/frm_novacap_en/com.sap.portal.lightTopLevelNavigationiView
    Component class : com.sap.portal.navigation.LightTopLevelNavigation
    User : NOVACAP_EN
         at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:444)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
         at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:680)
         at com.sap.portal.navigation.LightTopLevelNavigation.doContent(LightTopLevelNavigation.java:15)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
         at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: com.sapportals.portal.prt.component.PortalComponentException: Original exception:
         at pagelet._sapportalsjsp_LightTopLevelNavigation.doContent(_sapportalsjsp_LightTopLevelNavigation.java:64)
         at pagelet._sapportalsjsp_LightTopLevelNavigation.service(_sapportalsjsp_LightTopLevelNavigation.java:38)
         at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:360)
         at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
         ... 13 more
    Caused by: java.lang.NullPointerException
    #1.5 #001E4F33123E016B0000000900000E44000463AB8B9BC691#1235488339803#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#Guest#0##n/a##4af00e2001dd11debdfb001e4f33123e#Thread[PRT-Async 198,5,PRT-Async]##0#0#Error##Java###04:12_24/02/09_2214_104648850
    [EXCEPTION]
    {0}#1#java.lang.NullPointerException
    There is nothing I really understand but if you got any idea, it would be welcome.
    Thanks a lot.
    Thibault Schalck

    Thibault  ,
    restart the server and check
    Thanks
    Bala Duvvuri

  • Reader 9.0 - runtime error when launching from pdf

    Reader 9.0 does not like to launch from an associated pdf. It will occasionally open but 98% of the time it returns a Visual C++ Runtime Library error: "This application has requested the Runtime to terminate in an unusual way. Please contact the Application's support team for more information"
    If you open Reader 9.0 directly and drag a pdf into it, there is no problem. Everything works the way it is supposed to. It is only an associated launch that causes the problem. No other apps are experiencing launch problems on this comuter.
    System is running XP-SP3. System resources are not being taxed. Of course I have already tried uninstalling, reinstalling, rebooting.

    Yup, same here, OS and all.
    BUT, I can't even get Reader 9.0 directly without that error!
    When will I learn to stop trusting major X.0 releases from ANY software company?
    As always, I have a 8.1.2 full install saved and reverting back to it for now.
    BTW, Adobe initially looks like they will let you download 8.1.2, but then they switch you back up to 9.0. Gotta watch 'em.

  • Error when upgrading from 11.1.1.5 to 11.1.1.6

    All,
    I have been working on upgrading OBIEE from 11.1.1.5 to version 11.1.1.6. The 1st step is successful i.e. installation of OBIEE.
    The next step is to upgrade MDS and BIPLATFORM schema. For that I am running PSA.bat and getting the following error in the log
    please help.....
    [2012-05-16T10:44:22.143-07:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 10] [ecid: 0000JTMk2MiEOPKpqSS4yY1FgyTq000000,0] D:\Oracle\OracleBI\Middleware\Oracle_BI1\jdk\jre\bin\awt.dll: The specified procedure could not be found
    [2012-05-16T10:44:22.205-07:00] [Framework] [ERROR] [UPGAST-00054] [upgrade.Framework] [tid: 10] [ecid: 0000JTMk2MiEOPKpqSS4yY1FgyTq000000,0] error loading config file D:\Oracle\OracleBI\Middleware\Oracle_BI1\upgrade\components\biplatform.xml
    [2012-05-16T10:44:22.205-07:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 10] [ecid: 0000JTMk2MiEOPKpqSS4yY1FgyTq000000,0] Cause: failed to load the configuration file
    [2012-05-16T10:44:22.205-07:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 10] [ecid: 0000JTMk2MiEOPKpqSS4yY1FgyTq000000,0] Action: See the secondary error message for additional details.
    [2012-05-16T10:44:22.205-07:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 10] [ecid: 0000JTMk2MiEOPKpqSS4yY1FgyTq000000,0] [[
    java.lang.UnsatisfiedLinkError: D:\Oracle\OracleBI\Middleware\Oracle_BI1\jdk\jre\bin\awt.dll: The specified procedure could not be found
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1807)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
         at java.lang.Runtime.loadLibrary0(Runtime.java:823)
         at java.lang.System.loadLibrary(System.java:1028)
         at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.awt.NativeLibLoader.loadLibraries(NativeLibLoader.java:38)
         at sun.awt.DebugHelper.<clinit>(DebugHelper.java:29)
         at java.awt.Component.<clinit>(Component.java:566)
         at oracle.ias.update.plan.PlanSchema.<init>(PlanSchema.java:202)
         at oracle.ias.update.plan.PlanStep.<init>(PlanStep.java:159)
         at oracle.ias.update.plan.PlanComponent.<init>(PlanComponent.java:155)
         at oracle.ias.update.plan.Template.load(Template.java:153)
         at oracle.ias.update.plan.Template.loadAllTemplates(Template.java:98)
         at oracle.ias.update.UpgradeDriver.loadJ2EEConfiguration(UpgradeDriver.java:670)
         at oracle.ias.update.UpgradeDriver.main(UpgradeDriver.java:183)

    I am pretty much following the same links but none has those errors explanation. I am not sure why I am getting this error.
    D:\Oracle\OracleBI\Middleware\oracle_common\bin>psa.bat
    Oracle Fusion Middleware Patch Set Assistant 11.1.1.6.0
    Log file is located at: D:\Oracle\OracleBI\Middleware\oracle_common\upgrade\logs
    \psa2012-05-16-10-44-21AM.log
    D:\Oracle\OracleBI\Middleware\Oracle_BI1\jdk\jre\bin\awt.dll: The specified proc
    edure could not be found
    UPGAST-00054: error loading config file D:\Oracle\OracleBI\Middleware\Oracle_BI1
    \upgrade\components\biplatform.xml
    Could not initialize class javax.swing.JCheckBox
    UPGAST-00054: error loading config file D:\Oracle\OracleBI\Middleware\oracle_com
    mon\upgrade\components\audit.xml
    The command failed to complete successfully

  • Error when upgrading from 10.4 to 10.5

    Hi,
    I am getting an error message when I attempt to upgrade my macbook from 10.4.11 to 10.5. Before the installation begins I receive a message that states "You need 10.4 before upgrading.
    I thought it may have been a HD problem so I used disk utilities to verify permissions. I then repaired permissions that were damaged but the problem still is occurring. I have updated the computer completely and I meet the required specs to run 10.5.
    I think it sounds like I may have a systems file issue. Any help or suggestions would greatly be appreciated.
    BTW the Leopard disc is a retail version.

    MikeStan wrote:
    Hi,
    I am getting an error message when I attempt to upgrade my macbook from 10.4.11 to 10.5. Before the installation begins I receive a message that states "You need 10.4 before upgrading.
    I thought it may have been a HD problem so I used disk utilities to verify permissions. I then repaired permissions that were damaged but the problem still is occurring. I have updated the computer completely and I meet the required specs to run 10.5.
    I think it sounds like I may have a systems file issue. Any help or suggestions would greatly be appreciated.
    BTW the Leopard disc is a retail version.
    A retail version does not check for previous OSs. In fact it will install on a blank HD.
    If it is a retail version, backup your HD (clone is preferred) and then insert the retail DVD and reboot holding down the "C" key and continue.
    If you still get the message about 10.4 not being found, check the DVD carefully. Did you buy it from an Apple store or official Apple retailer?

  • Adobe reader error when upgrading from 9.4 to 9.4.5

    I need to do the upgrade manually, and not the auto upgrade direct from adobe. When we have adobe
    9.4 on the PC and do the upgrade to 9.4.5 I get this error.
    Windows installer window comes up with this:
    "The upgrade patch cannot be installed by   installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that have the correct upgrade patch."
    The patch and the Adobe versions are all correct, I think it's something in the MSI file ???
    Any suggestions???
    Thanks
    Paul

    In addition, if you are talking about Reader, not Acrobat, then you need to install the appropriate updates for Reader. For Acrobat you can go to Help>Check for updates and try that. You may have to repeat it. If you are doing a manual update, then you need to go to the updatte page in the download portion of the Adobe site and download all subnumbers after the one you currently have and install them in order. Be sure to use the Reader or Acrobat updates as appropriate, they are not the same product. There is no product named Adobe 9. Adobe is the company and the products are Acrobat 9 or Reader 9. It is not clear which you have.

  • "This field name is not known" error when upgrading from VS 2003 to VS 2005

    When we upgraded our web servers from VS 2003 to 2005, our crystal reports web viewer began having a problem with reports that contained sub-reports.  We now are getting the following error on the web page.  The reports were developed in Crystal 10, but I upgraded them to Crystal 11 but still recieved the same error.
    Any help would be greatly appreciated.
    thank you
    This field name is not known. Error in File C:\DOCUME1\DMDEVB1\ASPNET\LOCALS~1\Temp\CategorybyStateProductDist {B0FCB37B-A7DB-4786-AD69-55568EC94923}.rpt: Error in formula . '{usp_wd_RptCategoryByStateProductDist;1.State} = {?@State} ' This field name is not known.

    HI Karl,
    Also Try to update the database connection for the report.
    You can do that by opening report in designer, then
    Go To Database Menu -> Setdatasource Location
    Connect to the datasource you want and update the datasource.
    Save the report.
    Hope this Helps !!!
    Prasad

  • Troubleshooting 0x8007001f error when upgrading from 8 to 8.1 : How do I fix this?

    Hello,
    I have been trying to upgrade my windows 8 laptop to 8.1. However update fails due to error  0x8007001f. I have found out about this error is that an attached device is not working. How can I determine what is causing the issue?
    Before finding out what the error specifically ment, these are the troubleshooting steps I've tried so far:
    (1)Unplug all external devices, (like USB flash drives, mouse)
    (2)A clean boot startup
    (3)Turning off virus protection
    (4)Installing the KB2864247 UPDATE
    Thanks
    in advance to anyone who responds.
    (I've also heard that I should try to upload the setup logs file as a possibility, but I don't understand how to do so from this link: http://technet.microsoft.com/en-us/library/hh824819.aspx)

    Hi,
    Did this issue occurred when downloading the 8.1 update by windows store?
    I suggest we try following steps and try to reinstall again:
    Step 1:Clean update temp files:
    1.Press Windows key + R, type service.msc and press enter.
    2.Stop Windows update service.
    3.Run following command lines one by one to clear update temp files:
    cd %windir%
    ren SoftwareDistribution SDTemp
    exit
    4.Restart Windows update service.
    Step 2:Clear windows store catch:
    1.Press the Windows + R keys on your keyboard to open the Run dialog.
    2.Type WSReset.exe, and click/tap on OK.
    3.The Store will now open, and state the following: The cache for the store was cleared. You can now browse the store for apps
    If the issue persists, I suggest we backup all important files and try Reset this PC: PC settings -> Update and Recovery -> Recovery -> Remove everything and reinstall PC
    Hope this helps.
    Regards,
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error when upgrade from 8.8 PL5 to other patch or upgrade

    Hi,
    I encountered a problem during the upgrade process from PL05 to another PL, to be precise
    to PL13, PL14, PL15 and PL16.
    In practice, the system does not allow me to select Common DB and Company DB in the list of components to upgrade.
    If I look in log's folder and I find this trace:
    Logger Started----
    at : 10/11/2010  11:48:58:86350
    10/11/2010  11:48:58:85350       UpgradeWizard     Note               I     Technical     Invoke CRegistry::GetStringValue(...) error! # #     MID=-1     BOID=-1     BO=     UserID=     C:\B188SP0PL15\Wizard\Upgrade.exe     Version=8.80.233     Area=     PID=3268     TID=6140     D:\depot\BUSMB_B1\8.8_REL\SBO\8.8_REL\Application\SolutionPatch\Component\GlobalPropertiesManager.cpp     163
    System:
    Windows 2008 Standard R2 x64
    SQL Server 2005 Standard SP3 x64
    Any ideas?
    Thanks in advance!
    Claudio
    Edited by: Claudio Maddalozzo on Nov 10, 2010 12:31 PM
    Edited by: Claudio Maddalozzo on Nov 10, 2010 12:31 PM

    Hi,
    Official starting patch level to install B1 is SAP B1 8.8 SP00 PL10. it is for fresh installation. you may uinstall the PL05 first and then install the PL10. After install the PL10,  you can upgrade to whatever version of PL but I suggest to upgrade directly to PL16.
    The another concern of your problem is the using of windows server 2008 R2 x64. This is not supported by SAP B1 8.8 SP00 PL05.
    you may check this link to know more detail:
    https://websmp102.sap-ag.de/smb/sbo/platforms
    I quoted here:
    Server Platforms 2005 A SP01 Add-Ons 2005 SP01 2005 B 2007 A 2007 B 8.8 / 8.81
    Microsoft® Windows Server 2008 R2 (21)
    - 64 Bit (x64) (22)
      (incl. Windows Terminal Services) (12)
    - Standard & Enterprise Edition       X (24) X (24) X (24)
    note:
    (21) According to Microsoft® Corp., Windows Server 2008 R2 only supports SQL Server 2005 Service Pack 3 and SQL Server 2008 Service Pack 1 and later versions.
    (22) Microsoft® Corp. has announced that Windows Server 2008 is the last 32-bit Windows operating system. Therefore, support for 32-bit processors (x86) has been removed from Windows Server 2008 R2.
    (24) Supported as of 2007 A SP01 PL08, 2007 B PL15, and 8.8 PL07. Make sure to also read SAP Notes 1434624 and 1435183 as well as the SAP Notes referenced in the Related Notes sections.
    you must use PL10 as a starting PL before upgrade to PL16 in W2K8 R2 x64.
    JimM
    JimM

  • Ild error when upgrading from WorkShop 6.1 to 6.2

    I'm trying to use WorkShop 6 update 2 to compile and link.
    The options are "-compat=5 -O -instances=static -features=bool -g -xs -O0 -library=iostream,rwtools7 -liostream -mt -lCstd -lCrun -lthread -lc ...".
    But link editor reports errors (seems multiply-defined):
    ild: (error) NamedHookApplicationBase::__vtbl is defined in files NamedHooks.o and MessageHookEntryFilter.o
    ild: (error) __RTTI__1nYNamedHookApplicationBase_ is defined in files NamedHooks.o and MessageHookEntryFilter.o
    ild: (error) __RTTI__1CpnYNamedHookApplicationBase_ is defined in files NamedHooks.o and MessageHookEntryFilter.o
    Previously, I used 6.1 to do the same thing, free of any error. :(
    And I could not find any more about that thourgh 6.2 Release Notes.
    Did I miss any thing?
    Thanks so much!

    Well, it's strange.
    I removed "-instances=static" from compilation to test. And this time, no such error was raised any more.
    In my opinion, the very characteristic of static instances linkage is that all the instances are placed under the current compilation (and are not visible outside the compilation unit), which might increase the size of the program.
    But one more problem about "-lcx" occurred when I compile and link another set of C++ source files:
    The error messages are:
    Text relocation remains referenced
    against symbol offset in file
    __q_mag_sub 0x2f8 /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_add.o)
    __q_mag_sub 0x358 /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_sub.o)
    __q_mag_add 0x310 /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_add.o)
    __q_mag_add 0x344 /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_sub.o)
    <unknown> 0x50 /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_mul.o)
    <unknown> 0x94 /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_mul.o)
    <unknown> 0x9c /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_mul.o)
    <unknown> 0xac /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_mul.o)
    .stret8 0x37c /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_add.o)
    .stret8 0x148 /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_dtoq.o)
    .stret8 0xbac /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_mul.o)
    .stret8 0x11c /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_stoq.o)
    .stret8 0x3c4 /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_sub.o)
    .stret8 0xb4 /opt/sc6.2d/SUNWspro/WS6U2/lib/libcx.a(_q_utoq.o)
    ld: fatal: relocations remain against allocatable but non-writable sections
    The compile command is
    CC -compat=5 -g -xs -library=iostream -mt -features=no%conststrings ... -lCstd -lCrun -lm -lw -lcx -lc
    Still like the "ild error" we've been discussed, this kind of errors were not reported when I use lower version compiler 6.1.
    What puzzles me is that there is no "-B" option in the compilation cmd. But it seems that ld tried to link "libcx.a" but "libcx.so", even "libcx.so.1" does exist under the same directory. Then I ran an experiment, I manally put "-Bdynamic" before "-lcx", the error messages remain. :(
    I didn't get much result after search "-lcx" from internet. Do you know why this happens?
    Thanks,
    kidfire

  • Error al actualizar de windows 8 a windows 8.1 / Error when upgrading from windows 8 to windows 8.1

    Tengo un G580 con windows 8 instalado y actualizado completamente, cuando intento actualizar a windows 8.1 mediante la Tienda, sale un mensage que dice:
    La tienda Windows no esta disponible en este equipo.
    Ponte en contacto con el administrador del sistema para obtener informacion.
    Soy el unico usuario con privilegios de administrador, en Windows Update no aparece la actualizacion a Windows 8.1
    ¿Alguna Solucion?.
    Gracias.
    I have a G580 with windows 8 installed and updated completely, when I try to upgrade to 8.1 through the shop windows, I get a message that says:
    The Windows Store is not available on this computer.
    Contact your system administrator for information.
    I am the only user with administrator privileges in Windows Update does not appear the upgrade to Windows 8.1
    Any Solution?.
    thanks

    Hi @MsgE-8 
    Welcome to the HP Forums!
    It is a terrific place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    Here is a link to HP PCs - Updating Windows 8 to 8.1
    Here is a link to the Windows Compatibility Center  where you can have it scan your computer  to ensure you can update to Windows 8.1.
    The errors you received are usually due to a driver issue.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Crystal 2011 Failed to load database information error when upgrading from 2008.

    I'm unable to get past this error.   Error in File ~tmp34887ec5d7e6780.rpt: Failed to load database information.
    Configured Windows 2008 64 bit Server
    Installed Crystal Report Server 2011 - BI Enterprise 14.0.0
    Oracle 11g 64 bit version
    I can test the connection with success.  I can also run the tnsping command without issues.
    I pubished several working reports from Crystal 2008 to the new server with Crystal 2011.    Every time I run a report, I end up with the generic connection error: Error in File ~tmp34887ec5d7e6780.rpt: Failed to load database information.
    I saw a post that suggested installing the 32 bit Oracle Client first, and then the 64 bit client, but there was no indication that this would fix the error.  Does anyone know if that is infact the solution, or are there other underlaying issues?
    Thanks,
    Sue

    Hi Sue,
    Make sure you have 32 Bit version Oracle Client installed on your server as CR2011 is a 32 bit application and CR2011 Processing Server is also 32 bit.
    Check for the required Environment variables:
    Navigate to Start -> Control Panel -> System.
    Navigate to Advance system settings -> Environmental Variables.
    Under the user's variable check the environmental variable as given below if any difference make the changes:
    ORACLE_HOME=<64-bit version of the Oracle client>
    ORACLE_HOME32=<32-bit version>
    PATH=<64-bit version>
    PATH32=<32-bit version>
    BOE_USE_32BIT_ENV_FOR=ORACLE_HOME,PATH
    OR
    Install Oracle client as ‘Runtime’ install, then there is no need to set the Environment variables.
    If the Oracle client is installed prior to Business Objects then just restart the BO servers to make it working.
    I am assuming that you are recieving the error from BI launchpad so this post should have been on
    SAP BI
    - Shahnawaz

Maybe you are looking for

  • No SOUND on Youtube and other streaming services.

    Hi, I updated my 2011  MacBook Pro to OSX Yosemite. My only problem is: when I play the video on YouTube or other straming services I have to wait 5-10 second to hear the sound from the video. Sometimes i have to reload the page. Very annoying. Is th

  • Disk Utility won't let me format external drive to FAT32

    Maybe this cannot be done or the answer is simple and I am missing it. I have a 1.5tb Maxtor drive hooked up via fw800. I want to have 120gb of this as Mac OS extended journaled to back up my internal drive via Time Machine. I want the other 1.38tb t

  • Open view in a new browser window

    Hi all, I want to open a view in a new browser window. I try this two code: 1)IWDWindow window= wdControllerAPI.getComponent().getWindowManager().createExternalWindow(           "http://www.google.it","google",false); but in this case i can only open

  • All versions of ID - JS: Automating keyboard shortcuts

    Hello everyone: Once again I have an off-the-wall question. This small script used to change color settings that I am working on is almost complete; I just need to add a few more touches to it to make it perfect. My intention is to link it to a keybo

  • Problems after updating to v4.5.0.175

    I updated to V.4.5.0.175 and now none of my ringtones (even the preinstalled ones) do not work. I don't hear anything when someone calls or texts me. Is this a known issue or is there something I have to reset after an update?