Runtime error while add .Controls.Add("AcroPDF.PDF.1", "AcroPDF1", since update to 11.0.07
Hello,
since I update Adobe Reader from 10.1.9 to 11.0.07 my old little vb6 PDF-Viewer get an Runtime error by add .Controls.Add("AcroPDF.PDF.1", "AcroPDF1", frmMain)
Error -2147417848 (80010108).
What is change in the Reader-installation or what is the way to slove this error?
Thanks
rw
Dear Deepak
Thanks for quick response.
Note 1462415 - DB6: SQL -444 error messages in system log ( SAP_BW 701 SP7 suggested)
This is already implemented and updated in my 1st message.
Note 978319 - DB6: Incorrectly cataloged table functions
This note can not be implemented due to version issue.
Kindly suggest some more hints on top of what I already did.
Regards
Bipin
Similar Messages
-
Runtime error while trying to convert script to pdf and sending in mail
Hi all,
I m trying to convert the standard script into pdf using convert_otf fm and trying to send it as an attachment using 'SO_NEW_DOCUMENT_ATT_SEND_API1'.
I m using fm 'SSF_FUNCTION_MODULE_NAME' to get the function module name.
But i m getting a runtime error while executing the program..
Can anyone help me in this issue please.
Thanks in advance,
AshokHi Ramesh,
I m getting an runtime error function module not found. I ll paste the code here.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc = 0.
error handling ent_retco = sy-subrc.
perform protocol_update_i.
ENDIF.
ls_control_param-getotf = 'X'.
DATA: l_document_output_info TYPE ssfcrespd,
l_job_output_info TYPE ssfcrescl,
l_job_output_options TYPE ssfcresop.
check ent_retco eq 0.
CALL FUNCTION 'lf_fm_name'
EXPORTING
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = ' '
zxekko = l_doc-xekko
zxpekko = l_doc-xpekko
zxaend = l_doc-xaend
IMPORTING
document_output_info = l_document_output_info
job_output_info = l_job_output_info
job_output_options = l_job_output_options
TABLES
l_xekpo = l_doc-xekpo[]
l_xekpa = l_doc-xekpa[]
l_xpekpo = l_doc-xpekpo[]
l_xeket = l_doc-xeket[]
l_xtkomv = l_doc-xtkomv[]
l_xekkn = l_doc-xekkn[]
l_xekek = l_doc-xekek[]
l_xaend = l_doc-xaend[]
l_xkomk = l_xkomk
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = l_job_output_info-otfdata
lines = tb_pdf
EXCEPTIONS
err_max_linewidth = 0
err_format = 1
err_conv_not_possible = 2
OTHERS = 3. -
Error while creating control file
hi
i am getting following error while creating controll file
QL> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 629145600 bytes
Fixed Size 1250548 bytes
Variable Size 171969292 bytes
Database Buffers 452984832 bytes
Redo Buffers 2940928 bytes
SQL> @c:\study\rose\c.sql
SP2-0042: unknown command "DATAFILE" - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
2 MAXLOGFILES 32
3 MAXLOGMEMBERS 2
4 MAXDATAFILES 32
5 MAXINSTANCES 16
6 MAXLOGHISTORY 1752
7 LOGFILE
8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
9 GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
10 GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
11* GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
SQL>CHETAN YADAV wrote:
hi
i am getting following error while creating controll file
QL> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 629145600 bytes
Fixed Size 1250548 bytes
Variable Size 171969292 bytes
Database Buffers 452984832 bytes
Redo Buffers 2940928 bytes
SQL> @c:\study\rose\c.sqlWe can't debug what we can't see. And what we can't see is the contents of "c:\study\rose\c.sql".
SP2-0042: unknown command "DATAFILE" - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
2 MAXLOGFILES 32
3 MAXLOGMEMBERS 2
4 MAXDATAFILES 32
5 MAXINSTANCES 16
6 MAXLOGHISTORY 1752
7 LOGFILE
8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
9 GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
10 GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
11* GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
SQL> -
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas. -
Runtime Error while summing a column in ALV output
Dear All,
I have developed an ALV Report and the report is giving output without any flaws.
I have defined proper field catalog and displaying the results using REUSE_ALV_GRID function module.
Now the report is generating Runtime Error while the user selects a column and click the SUM icon.
The fields like Qty, or amounts are also theowing runtime error while summing up their column in the ALV output.
What might be the reason and how to resolve this issu?
Regards
PavanHi ,
I don't know how you have write down the code but follow the below coding example:
FOR TOTAL:
there is a property of fieldcatalog, that is do_sum.
USE COED LIKE:
PERFORM fieldcat USING:
'1' 'MATNR' 'I_MARD' 'MATERIAL NO' 'MARD' 'MATNR ' ' ',
'2' 'NETWR' 'I_MARD' 'PLANT' 'MARD' 'WERKS' ' ',
FORM fieldcat USING value(p_0029)
value(p_0030)
value(p_0031)
value(p_0032)
wa_fieldcat-col_pos = p_0029.
wa_fieldcat-fieldname = p_0030.
wa_fieldcat-tabname = p_0031.
wa_fieldcat-reptext = p_0032.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " FIELDCAT
in final output you will get the total of currency field.
FOR SUB TOTAL:
decleare: i_sort type standard table of slis_sortinfo_alv,
wa_sort type slis_t_sortinfo_alv.
wa_sort-spos = '1'.
wa_sort-fieldname = 'field1'.
wa_sort-subtot = 'X'.
append wa_tab to i_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fieldcat
it_sort = i_sort
Hope this can solve your pbs.
If you need more inputs let me know.
Regards,
Tutun -
Runtime error while posting a document (FB70/FBS1)
Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa. -
Getting Runtime Error while Activating Characteristics in BW sandbox system
Hi, i m getting runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
Short Text
SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
Runtime Errors DBIF_REPO_SQL_ERROR
even if creating a new Characteristics same error is comming.
Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
Edited by: kush kumar on Mar 23, 2010 11:56 AMHi,
Follow bellow steps:
a) Once check the Lock entries by useing SM13.
Goto SM13--> Select your object lock entries --> Select delete.
b). Acitvate the Infoobject.
Regards. -
Runtime error while executing rule - see long text RSTRAN 301
Hi BW Gurus,
When I executing the DTP, the following error occured.
Runtime error while executing rule -> see long text RSTRAN 301
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'GBP' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP46DQFOYRZTUS0QITMO07IFTS0 1137
Appreciate any useful suggestions.
Thanks in advance.
MaruthiGuess you are doing some calculation in your routines ..based on Currency Key i.e USD or INR , GBP..etc ..it should be currency value..rather than currency key. Check your field caluclation
-
Diadem runtime error while executing command "SchemeMeasStar"
Hello:
I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
-Error- DIAdem
Runtime Error While Executing Command "SchemeMeasStar"
Error Type: UNKNOWN
Error Address:00001720
Module Name:GFSBase.Dll
Would you like to give me some suggestions?
thanks very much
jingDear MarcusP:
Thank you very much.
your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
Thank you very much.
yours
Jing
Attachments:
DIAdem_Error.doc 305 KB -
Runtime Error While executing the WebDynpro Application
I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
No roll storage space of length 9728 available for OCCURS area.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary -
Error While generating Control Reciepe
Hi,
I am mapping MTS scenario for PI industry and i stuck up with an error while creating Control recipe system gives following erroe msg, No values assigned to char. 0010 PPPI_INSTRUCTION in process instruction 9999 phase 0020. Msg number is CB210.
Please Help me in this regards,
Regards,
VishalHi,
Check the PI instructuction category and charactersitics assigned to Phase 20.
If the value assignment is automatic check the function modules manually whether it is working fine.If the value assignment is manual then enter the required value. for the characteristics PPPI_instruction. Also check whether that is a required value.
If it is si remove the reuired value tick and check.
thanks and regards
muru
Edited by: MURUGESAN THANGATHURAI on Sep 17, 2009 3:46 PM -
Getting Portal Runtime Error while accessing one link in Portal Page.
Hi,
Can anyone tell why I am getting below error while accessing one of the portal page link:
" Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 01:19_27/02/09_0046_16441150
Refer to the log file for details about this exception. "
Also please let me know how to get rid of this if possible.
Thanks in Advance
Vaibhav SrivastavaThank you for your prompt reply.
Could you please elaborate the same.
I am getting Portal runtime error while I am acessing an iveiw in E-recruiting. We have setup the role and user in both portal and Backend. But still the error. Could you pls send me the setting you have done.
Portal runtime ERROR
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 02:27_27/04/09_0042_113148050
Refer to the log file for details about this exception.
regards
Justin -
Runtime Error while using Dynamic Selection
Hi,
We are getting a runtime error while using a dynamic selection. One of the fields has got an apostrophe in the middle of the text and so the condition is returning an error SAPSQL_WHERE_PARANTHESES.
Let's say the value in the field is SCV's. So the WHERETAB is filled as 'SCV's' or `SCV's`. An exception is caught in this case as there is no closing apostrophe.
Let us know if anyone has come across a similar issue and any help is appreciated.
Regards,
SarvesHi Sarves,
as Rob said.
check also the [ORACLE FAQS|http://www.orafaq.com/faq/how_does_one_escape_special_characters_when_writing_sql_queries] or [SQL SERVER u2013 How to Escape Single Quotes|http://blog.sqlauthority.com/2008/02/17/sql-server-how-to-escape-single-quotes-fix-error-105-unclosed-quotation-mark-after-the-character-string/]
Honestly: Before posting here and getting a whole lot of more or less useless comments just use your favorite search engine.
Regards,
Clemens -
Runtime Error While in Tcode KES1
Hello Team,
We are using ECC6 EhP6.
I am getting a Runtime error while working with Tcode KES1:
Short text
Syntax error in program "SAPL0KEA ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPL0KEA " in include "L0KEAT00
" in
line 225:
"The Dictionary structure or table "*T2580" is either not active or doe"
"s not exist."
The include has been created and last changed by:
Created by: "GAURILAD "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPL0KEA :
"The Dictionary structure or table "*T2580" is either not active or doe"
"s not exist."
Please help me resolve this issue
Thanks
SaheliHi Dnyaneshwar,
Please execute report RKEAGENV and regenerate operating concern and check if the issue is resolved.
If not run report RKEAGENF with your operating concern, type of COPA = 1 (costing based) and flag the 'Refill' option. Regenerate the operating concern.
If running report RKEAGENV will cause another error concerning operating concern E_B1,then please follow the steps in KBA note 1514122
Operating concern should be E_B1 even though you may not be using this operating concern.
regards
Waman -
Getting runtime error while doing sales order
Hi,
I am getting a runtime error while doing sales order.
Error : SAPSQL_INVALID_FIELDNAME
Kindly suggets....stuck up badly.
cant do any transaction.
Regards
KishanHello,
Check OSS Note#209847 and 310304
Regards,
Gauravjit.
Reward points if the notes are helpful
Maybe you are looking for
-
Creating Formula calculated field in BI publisher Template
Hi, I am creating a report template (rtf) using oracle BI publisher Desktop for siebel 8.1.1 and i need to add a new field that divide two created count fields , but i don't know how to make it and i didn't have any help from the designer guide. Than
-
Playing purchased movies from iPad that had been synced to my computer
Downloaded purchased movie from itunes to my computer and then synced it to my IPad. I tried playing the movie from my iPad to my apple tv and it says this device is not authorized to play content. Also tried from iPod but no luck! I can watch the
-
Personas - Themes have disappeared after update. Is this usual?
I started to use Personas but after last Firefox update they disappeared and are no longer in Tools>AddOns> Themes. Is this usual and do they have to be downloaded after each update? == This happened == Just once or twice == Firefox last updated
-
Hello, I must to migrate some WD Java projects from 7.0 to 7.3; I can migrate all of them, except one. This DC has 11 WD Components (some of them quite big size); there are no errors within and I should deploy it and test it. The problem becomes when
-
Hi All, I have one data element and i want to find out in which tcodes these data element is used? Pls dont suggest me to check where used list, bcoz there is no option for checking tcodes in where used list . Thnks, Sunita