Runtime error while clicking PGI in VL02n

After Creating slaes , delivery and transport order and when clicking PGI, i am getting the following error.May I know the possible solution for this.
   when a goods movement for an inbound or outbound delivery is posted
   directly from VL31N/ VL01N, XBLNR is not yet known when we call
   CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
   BKPF as well. There is no other way to forward XBLNR to FI as not
   every document is posted by MB_CREATE -> a new function module in
   MBWL for transferring the information, called by FI, meant to load
   the complete function group for all MBxx postings when this isn't
   required (Performance). Would be the better way to transport the
   information after switching off MBxx in later release.
   corresponding IMPORT ... FROM MEMORY ... can be found in
   AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
     l_mem_id = 'MKPF-XBLNR'.                                   " 641365
     EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id.             " 641365
   ENDIF.
   IF xmkpf-xabln IS INITIAL.                               "note 434093
       CALL FUNCTION 'MB_XAB_NUMBER_GET'.                   "note 434093
   ENDIF.                                                   "note 434093
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
   CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
        EXCEPTIONS
          error_message = 4.
As soon as we have started to put things into UPDATE TASK, we must
ensure that errors definitely terminate the transaction.
MESSAGE A is not sufficient because it can be catched from
external callers which COMMIT WORK afterwards, resulting in
incomplete updates. Read note 385830 for the full story.
   IF NOT sy-subrc IS INITIAL.
      MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
                 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    MESSAGE A263.
   ENDIF.
Regards,
Madhusudhan.

Hi Madhu,
use BADI_LE_SHP_GOODSMOVEMENT,it will trigger from inbound (VL32N)And out bound delivery(VL02N) when you click on the PGI(Post goods issue).and the Function module CALL FUNCTION 'MB_CREATE_GOODS_MOVEMENT'.it will fullfill ur rqirement.
Regards

Similar Messages

Portal Runtime Error while clicking on value selector

Hi,
I am facing problem while clicking on value selector on Picklist search iview and also any lookup table value selector.
If I assign the same role to my portal user(Admin rights) working fine...but if I assign it to end users...not accessible on popup and giving portal runtime error.
Currently i have assigned standard "eu_role" to the end users...Do I need to give any special permissions to some of end users?
Appreciate all your help in this regard.
Thanks,
Pooja

System Administration > Permission > Security Zones >
com.sap.pct.mdm.appl.masterviews > high_safety >
com.sap.pct.mdm.appl.masterviews > low_safety >
com.sap.pct.mdm.tech.systems > high_safety
com.sap.pct.mdm.tech.wizards > high_safety
give Read / Write and End User access to the custom role/standard role that has to access MDM Views.
Regards,
Nitin

Error While doing PGI from VL02n

Hello all,
Iam doing PGI from VL02n transaction and getting the following error :
E M7 055
"G/L account 500001 does not exist in company code RB02."
Please explain why is it going after G/L account 500001.
Thanks & Regards,

Hi,
I think the cost centre has not been configured for the material.It is a functional issue so ask your functional consultant to configure it.
Thanks,
Sandeep.

Error while doing PGI from VL02n Transaction.

Hi..
I am doing PGI from VL02n transaction and getting the following error. "Plant conversion Failed".
Any idea what might be wrong.
Thanks and apprecite ur help.

PGI is the simplest BDC you can ever write. If you are getting this error, there must be something wrong with the data. Try doing the transaction call online in debug mode and see where the error comes from. You can then identify what needs to be done.

Error while doing PGI via VL02n.

Hi Gurus
I am doing Cross-Company STO here. First i created a PO(me21n) with doc.type NB and del.type NLCC and did create an outbound delivery(VL10B) and trying to post goods issue for the same. That's where i got this error message. Please help me out what could be wrong?
Fld select.for mvmt type 643 / acct 1201015 differs for Asset number / subnumber (024 )
Need it very urgently.
Thanks in advance and points will be rewarded for helpful answers.

Pradheep,
Please go through one of my previous responses to a similar question.
Stock posting...
Hope this helps.
H Narayan

Runtime Error while summing a column in ALV output

Dear All,
I have developed an ALV Report and the report is giving output without any flaws.
I have defined proper field catalog and displaying the results using REUSE_ALV_GRID function module.
Now the report is generating Runtime Error while the user selects a column and click the SUM icon.
The fields like Qty, or amounts are also theowing runtime error while summing up their column in the ALV output.
What might be the reason and how to resolve this issu?
Regards
Pavan

Hi ,
I don't know how you have write down the code but follow the below coding example:
FOR TOTAL:
there is a property of fieldcatalog, that is do_sum.
USE COED LIKE:
PERFORM fieldcat USING:
'1' 'MATNR' 'I_MARD' 'MATERIAL NO' 'MARD' 'MATNR ' ' ',
'2' 'NETWR' 'I_MARD' 'PLANT' 'MARD' 'WERKS' ' ',
FORM fieldcat USING value(p_0029)
value(p_0030)
value(p_0031)
value(p_0032)
wa_fieldcat-col_pos = p_0029.
wa_fieldcat-fieldname = p_0030.
wa_fieldcat-tabname = p_0031.
wa_fieldcat-reptext = p_0032.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " FIELDCAT
in final output you will get the total of currency field.
FOR SUB TOTAL:
decleare: i_sort type standard table of slis_sortinfo_alv,
wa_sort type slis_t_sortinfo_alv.
wa_sort-spos = '1'.
wa_sort-fieldname = 'field1'.
wa_sort-subtot = 'X'.
append wa_tab to i_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fieldcat
it_sort = i_sort
Hope this can solve your pbs.
If you need more inputs let me know.
Regards,
Tutun

Getting error while doing pgi

i am getting an error while doing pgi, the error is 'runtime error - description of exception'
how could i overcome this problem
pls help me to solve this problem

Hi,
Consult your abaper he can give you a solution.
Thank you,

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Runtime error while trying to convert script to pdf and sending in mail

Hi all,
I m trying to convert the standard script into pdf using convert_otf fm and trying to send it as an attachment using 'SO_NEW_DOCUMENT_ATT_SEND_API1'.
I m using fm 'SSF_FUNCTION_MODULE_NAME' to get the function module name.
But i m getting a runtime error while executing the program..
Can anyone help me in this issue please.
Thanks in advance,
Ashok

Hi Ramesh,
I m getting an runtime error function module not found. I ll paste the code here.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = lf_formname
    IMPORTING
      fm_name            = lf_fm_name
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc = 0.
error handling ent_retco = sy-subrc.
perform protocol_update_i.
ENDIF.
ls_control_param-getotf = 'X'.
DATA: l_document_output_info TYPE ssfcrespd,
        l_job_output_info TYPE ssfcrescl,
        l_job_output_options TYPE ssfcresop.
check ent_retco eq 0.
CALL FUNCTION 'lf_fm_name'
EXPORTING
    archive_index = toa_dara
    archive_parameters = arc_params
    control_parameters = ls_control_param
    mail_recipient = ls_recipient
    mail_sender = ls_sender
    output_options = ls_composer_param
    user_settings = ' '
    zxekko = l_doc-xekko
    zxpekko = l_doc-xpekko
zxaend = l_doc-xaend
    IMPORTING
      document_output_info = l_document_output_info
      job_output_info = l_job_output_info
      job_output_options = l_job_output_options
      TABLES
        l_xekpo = l_doc-xekpo[]
        l_xekpa = l_doc-xekpa[]
        l_xpekpo = l_doc-xpekpo[]
        l_xeket = l_doc-xeket[]
        l_xtkomv = l_doc-xtkomv[]
        l_xekkn = l_doc-xekkn[]
        l_xekek = l_doc-xekek[]
        l_xaend = l_doc-xaend[]
        l_xkomk = l_xkomk
        EXCEPTIONS
          formatting_error = 1
          internal_error = 2
          send_error = 3
          user_canceled = 4
          OTHERS = 5.
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format                = 'PDF'
      max_linewidth         = 132
    IMPORTING
      bin_filesize          = v_len_in
    TABLES
      otf                   = l_job_output_info-otfdata
      lines                 = tb_pdf
    EXCEPTIONS
      err_max_linewidth     = 0
      err_format            = 1
      err_conv_not_possible = 2
      OTHERS                = 3.

Runtime error while posting a document (FB70/FBS1)

Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?

Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa.

Getting Runtime Error while Activating Characteristics in BW sandbox system

Hi, i m getting runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
Short Text
SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
Runtime Errors DBIF_REPO_SQL_ERROR
even if creating a new Characteristics same error is comming.
Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
Edited by: kush kumar on Mar 23, 2010 11:56 AM

Hi,
Follow bellow steps:
a) Once check the Lock entries by useing SM13.
Goto SM13--> Select your object lock entries --> Select delete.
b). Acitvate the Infoobject.
Regards.

Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE

Hi All,
I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE:
Goods movement not possible with mvmt type 601
Can anyone suggest me what will be the solution for it?
Regards,
Raghuraman.k

I tried with the above BAPI but it is not working.
In my case a delivery has one line item with batch split and other line item without batch split.
Below is my code :
DATA : gwa_header_data TYPE bapiobdlvhdrcon,
       gwa_header_ctrl TYPE bapiobdlvhdrctrlcon,
       lv_delivery     TYPE bapiobdlvhdrcon-deliv_numb,
       git_item_data TYPE STANDARD TABLE OF bapiobdlvitemcon,
       gwa_item_data TYPE bapiobdlvitemcon,
       git_item_ctrl TYPE STANDARD TABLE OF bapiobdlvitemctrlcon,
       gwa_item_ctrl TYPE bapiobdlvitemctrlcon,
       git_return    TYPE STANDARD TABLE OF bapiret2,
       gwa_return    TYPE bapiret2.
*Header data
gwa_header_data-deliv_numb = '0808000002'.
*Header Control data
gwa_header_ctrl-deliv_numb = '0808000002'.
gwa_header_ctrl-post_gi_flg = 'X'.
*Delivery Number
lv_delivery = '0808000002'.
*Item data and its corresponding control data
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900002'.
gwa_item_data-dlv_qty         = 4.
gwa_item_data-dlv_qty_imunit = 4.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900002'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900003'.
gwa_item_data-dlv_qty         = 6.
gwa_item_data-dlv_qty_imunit = 6.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900003'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '000020'.
gwa_item_data-dlv_qty         = 10.
gwa_item_data-dlv_qty_imunit = 10.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '000020'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
BREAK-POINT.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
EXPORTING
    header_data    = gwa_header_data
    header_control = gwa_header_ctrl
    delivery       = lv_delivery
TABLES
    item_data      = git_item_data
    item_control   = git_item_ctrl
    return         = git_return.
BREAK-POINT.
IF git_return IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.

Runtime error while executing rule - see long text RSTRAN 301

Hi BW Gurus,
When I executing the DTP, the following error occured.
Runtime error while executing rule -> see long text     RSTRAN     301
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    The argument 'GBP' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP46DQFOYRZTUS0QITMO07IFTS0 1137
Appreciate any useful suggestions.
Thanks in advance.
Maruthi

Guess you are doing some calculation in your routines ..based on Currency Key i.e USD or INR , GBP..etc ..it should be currency value..rather than currency key. Check your field caluclation

Diadem runtime error while executing command "SchemeMeasStar"

Hello:
I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
-Error- DIAdem
Runtime Error While Executing Command "SchemeMeasStar"
Error Type: UNKNOWN
Error Address:00001720
Module Name:GFSBase.Dll
Would you like to give me some suggestions?
thanks very much
jing

Dear MarcusP:
Thank you very much.
your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
Thank you very much.
yours
Jing
Attachments:
DIAdem_Error.doc ‏305 KB

Runtime Error While executing the WebDynpro Application

I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
    No roll storage space of length 9728 available for OCCURS area.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.

Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary

Runtime error while clicking PGI in VL02n

Similar Messages

Maybe you are looking for