Runtime error while creating applicent initial data in PB10

Dear friends,
       in initial data entry in reruitment in PB10 once i complete the entry of data in organization assignment.it is going into ABAP runtime error.
Trigger Location of Runtime Error
    Program                               SAPLHRAC
    Include                                 LHRACU05
    Row                                     390
    Module type                         (FORM)
    Module Name                        READ_IT_FROM_DB
Short text
    Exception condition "INFTY_NOT_FOUND" raised.
can any help me how to resolve this issue.
Thanks in advance,
Regards,
sai prasad

Hi Revathi,
With reference to your responce i have checked pb04. all that i found is it is not taking the number range that i have assigned in NUMAP feature it is taking other number range.
How should i go further with this.
Regards,
sai prasad

Similar Messages

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Portal Runtime Error while creating new system in portal content

Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file

Hi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

Portal runtime error while creating users in portal content administrator

I am getting this error while creating new users in portal.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_admin_ws/com.sap.portal.user_management/com.sap.portal.createNewUser/com.sap.portal.createNewUser
Component Name : com.sap.portal.usermanagement.admin.CreateNewUser
com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z.
Exception id: 03:51_27/08/08_0028_7431850
See the details for the exception ID in the log file
any help is appreciated...

log file look something like
this
2,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception in PortalRequestManager.dispatchRequest without timeout
[EXCEPTION]
#1#java.lang.NoSuchMethodError: com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z
     at com.sap.security.core.admin.util.checkEmail(util.java:110)
     at com.sap.security.core.admin.UserBean.checkFieldValidity(UserBean.java:695)
     at com.sap.security.core.admin.UserBean.checkUser(UserBean.java:591)
     at com.sap.security.core.admin.UserAdminLogic.performUserModify(UserAdminLogic.java:3226)
     at com.sap.security.core.admin.UserAdminLogic.executeRequest(UserAdminLogic.java:552)
     at com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent.doContent(UserAdminComponent.java:71)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
     at java.security.AccessController.doPrivileged(AccessController.java:241)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:758)
#1.5#001125A6576A008C00000015000550E2000455943BAE9D63#1219995051656#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#197794##irconepd_EPD_7431850#Administrator#f4d062d0759411ddb89b001125a6576a#Thread[PRT-Async 2,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception ID:01:00_29/08/08_0043_7431850
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_admin_ws/com.sap.portal.user_management/com.sap.portal.userSearch/com.sap.portal.userSearch
Component class : com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent
User : Administrator
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
     at java.security.AccessController.doPrivileged(AccessController.java:241)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:758)
Caused by: java.lang.NoSuchMethodError: com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z
     at com.sap.security.core.admin.util.checkEmail(util.java:110)
     at com.sap.security.core.admin.UserBean.checkFieldValidity(UserBean.java:695)
     at com.sap.security.core.admin.UserBean.checkUser(UserBean.java:591)
     at com.sap.security.core.admin.UserAdminLogic.performUserModify(UserAdminLogic.java:3226)
     at com.sap.security.core.admin.UserAdminLogic.executeRequest(UserAdminLogic.java:552)
     at com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent.doContent(UserAdminComponent.java:71)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 7 more

RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6

Hi
Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file
thanks in advance
Rock

hi,
check the log file and let me the the error.
manish

Error while creating customer master data

dear sir,
i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
again while creating one with same name showing error while maintaing sales level data
Check: Table KNA1 does not exist, table KNVI does
Message no. F2061
plz help how do i rectify this problem and maintain the same cutomer no (external) again.
regards,
Debesh

Hi,
you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
regards
Vivek.
Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

Runtime Error while creating FINANCIAL STATEMENT VERSION

Hi Experts,
The major concern of the problem is related with the new creation of FINANCIAL STATEMENT VERSION.
(SPRO --> IMG --> Financial Accounting --> General Ledger Accounting --> Business Transactinons --> Closing > Document> Define Financial Statement Versions.)
My quries is that is it possiable to maintain more then one FSV for the same company code or for same chart of account.
If yes then we are trying to do it . But the problem reflect, be the indication that we can`t maintain more then one code.
Its giving an runtime error
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
Date and Time          15.03.2008 18:36:04
Short text
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLFAGL_FSV" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
procedure "FSV_TEXTS_CONVERT" "(FORM)", nor was it propagated by a RAISING
      clause.
Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     If you use an ABAP/4 Open SQL array insert to insert a record in
     the database and that record already exists with the same key,
     this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
     situation, processing does not terminate, but SY-SUBRC is set to 4.)
We are trying Its giving an abap dump
Rest the technicall aspect that is comming in ABAP Dump i am not
getting.....so pls inquire according to yourself.
Kind Regards,
Sudhanshu

Hello
Logically speaking, a company code can have more than one FSV as long as they share the same chart of accounts.
When COA is common, the FSV pattern can be designed seperatly to serve the purpose of varied reporting.
The dump you are getting is a temporary snag. Take a screen shot from SM54 after you execute the report and pass it to BASIS for analysis. They would fix that.
Reg
assign points if useful

Error while creating Applicant in CBIHT4

Dear Experts,
While creating the Appliacnt via t.code CBIHT4 , I got following error
Feature IVWID has not been activated yet Message no. P0604
Diagnosis
The feature must be generated before use.
Procedure
Start transaction PE03 and generate the feature.
So as per guidelines I have run t.cpde PE03 and trying to activate IVWID but there i am getting error
E: Field MOLGA does not belong to the fields flagged in the feature structure
Message no. 5P320
Diagnosis
Every feature has a structure from which fields can be selected. Only fields that have been flagged using structure maintenance can be used in the decision tree for decision operations.
Thus request you to please do the needful.
Regards,
Amol Joshi

Hi Amol,
Can you try maintaining applicant data thro' PB30 once and let me know if you are still getting the same error.
When you are executing transaction code PB30, please choose the UGR and molga as per your country.
BR
Chetan

Runtime error while creating sales order in VA01

Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please

Please note the error details
Runtime Errors         SYNTAX_ERROR
Date and Time          07.01.2010 17:43:06
Short text
Syntax error in program "RK2LSFOC ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RK2LSFOC " in include "RK2LSFOC
" in
line 128:
"No component exists with the name "KWBRUM". ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "RK2LSFOC ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program RK2LSFOC :
"No component exists with the name "KWBRUM". ."
|    " "

Runtime error while creating WO/Po

Hi,
I am getting Runtime Errors         GETWA_NOT_ASSIGNED while creating WO/PO with account assignments P.(project).
If i take account assignments as U (unknown) WO will save.But while using Account Asignment P I am getting Runtime error as below
pls help
Runtime Errors         GETWA_NOT_ASSIGNED
Date and Time          19.06.2009 14:23:20
Short dump has not been completely stored (too big)
Short text
     Field symbol has not yet been assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLKKBL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     You attempted to access an unassigned field symbol
     (data segment 106).
     This error may occur if
     - You address a typed field symbol before it has been set with
       ASSIGN
     - You address a field symbol that pointed to the line of an
       internal table that was deleted
     - You address a field symbol that was previously reset using
       UNASSIGN or that pointed to a local field that no
       longer exists
     - You address a global function interface, although the
       respective function module is not active - that is, is
       not in the list of active calls. The list of active calls
       can be taken from this short dump.
else.
    assign <fs13> to <field>.
    gs_fc = gs_sfc13.
endif.
when 014.
if gs_out_flags-slave ne 'X'.
    assign <fm14> to <field>.
    gs_fc = gs_mfc14.
else.
    assign <fs14> to <field>.
    gs_fc = gs_sfc14.
endif.
when 015.
if gs_out_flags-slave ne 'X'.
    assign <fm15> to <field>.
    gs_fc = gs_mfc15.
else.
    assign <fs15> to <field>.
    gs_fc = gs_sfc15.
endif.
when 016.
if gs_out_flags-slave ne 'X'.
    assign <fm16> to <field>.
    gs_fc = gs_mfc16.
else.
    assign <fs16> to <field>.
    gs_fc = gs_sfc16.
endif.
when 017.
if gs_out_flags-slave ne 'X'.
    assign <fm17> to <field>.
    gs_fc = gs_mfc17.
else.
    assign <fs17> to <field>.

I found 12 OSS notes using keywords GETWA_NOT_ASSIGNED SAPLKKBL
Read them, if there is nothing that solves your problem, then contact SAP yourself.

Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation

I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
"Document" content type for this library.
Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
request failed with HTTP status
401: Unauthorized.".
Can anybody tell me why I am getting this error?
Note: I have created the site and the library using SharePoint Admin account.

Hi,
Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
SharePoint farm. Add the report server to the
SharePoint farm and see how it works.
To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
or technology instance.
More information, see
http://msdn.microsoft.com/en-us/library/bb283190.aspx
Thanks.
Tracy Cai
TechNet Community Support

Error While Creating The Generic Data Source.

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

n Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM

Error while Creating new Position-Data fields have not been filled (no. 5A135)

Dear Consultants,
My client using SAP HCM form 2008, now they want to create new positions to the existing system,
To create new positions I am using T Code : PP03, while creating I am getting error "Date Fields have not been filled- Error Message No - 5A135", I want to create the positions valid from 01.04.2014. please do needful why this error is coming
Regards,
Naresh

Hi,
It is mandatory to give the org unit to which the position is being associated with.
Give the org unit and try saving it.
Thanks,
Sriram

Portal runtime error while creating rooms

Hi,
I installed collaboration and content management on my portal instance
and started basic configuration. Now while creating rooms , i get the
portal runtime error. I have enclosed the screen shot of the error.
I have enclosed the steps that can be followed to reproduce the error.
Portal Runtime Error
An exception occurred while processing a request for :
iView :
pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.portal.content_admin_ws/com.sap.netweaver.coll.colcontent/com.sap.netweaver.coll.RoomCreation/com.sap.netweaver.coll.RoomCreationWizard
Component Name : com.sap.netweaver.coll.appl.ui.room.RoomCreationWizard
The exception was logged. Inform your system administrator..
Exception id: 10:23_07/02/07_0037_818308650
See the details for the exception ID in the log file

Hi Detlev,
Thanks a lot. I have enclosed the information from default trace.
<< item 0 : >>#1.5#00306E0AA058008600000060000044AC000428E704E99CFE#1170872586724#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#SAPOSS#13800##srv006_W81_818308650#SAPOSS#11f658b0b6d811db93c800306e0aa058#Thread[PRT-Async 3,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception ID:10:23_07/02/07_0037_818308650
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.portal.content_admin_ws/com.sap.netweaver.coll.colcontent/com.sap.netweaver.coll.RoomCreation/com.sap.netweaver.coll.RoomCreationWizard
Component class : com.sap.ip.collaboration.roomui.api.rcwizard.RcWizardComponent
User : SAPOSS
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.wdf.WdfError
at com.sapportals.wdf.WdfCompositeController.buildComposition(WdfCompositeController.java:678)
at com.sapportals.htmlb.AbstractCompositeComponent.preRender(AbstractCompositeComponent.java:33)
at com.sapportals.htmlb.Container.preRender(Container.java:118)
at com.sapportals.htmlb.Container.preRender(Container.java:118)
at com.sapportals.htmlb.Container.preRender(Container.java:118)
at com.sapportals.portal.htmlb.PrtContext.render(PrtContext.java:413)
at com.sapportals.htmlb.page.DynPage.doOutput(DynPage.java:237)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:129)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 7 more
Manoj

Runtime error while creating logical database report pgm

Hi,
I have started doing pgm on Logical Database report using VBAK,VBAP and MARA. I took VBAK as the root node and VBAP& MARA as subnodes. The actual requirement is:- I am trying to place these tables in Application server for perfromance issue using Logical database. Based on sales, the items need to be be displayed. And based on Items, the material data should be displayed.So root node here is VBAK.
I have created these 3 nodes in SE36 tx.code. when I go back to se36 main screen and under "subobjects" ,I've selected "selections". I got a dialog box saying that "Nodes for which free selections are to be made". I have clicked on the radio buttons.And then clicked on "transfer" . I am getting a runtime error . Please let me know the solution.
Please do send me the actual process to goon with logical database reporting.

Hello
Logically speaking, a company code can have more than one FSV as long as they share the same chart of accounts.
When COA is common, the FSV pattern can be designed seperatly to serve the purpose of varied reporting.
The dump you are getting is a temporary snag. Take a screen shot from SM54 after you execute the report and pass it to BASIS for analysis. They would fix that.
Reg
assign points if useful

Runtime error while creating applicent initial data in PB10

Similar Messages

Maybe you are looking for