Runtime error while executing Tcode FAGLL03

Hello experts
we have 2 clients in PRD
100,200
In 100 if i execute the tcode FAGLL03 it is showing the line items within 100 sec.
where as in 200 if i execute FAGLL03 it is showing runtime error.
if this executed in background it takes 1300 sec and finished successfully.
From basis perspective what would be the issue.
Regards
Ravi

Hello srini
Thanks for ur input
Details
Recording at local and central time........................ 06.05.2009 14:03:30
Task................ 07522 / Dialog work process No. 00
User................ DEVAKUMAR
Client.............. 200
Terminal............ H2SBASIS
Session............. 1
Transaction code.... FAGLL03
Program name........ FAGL_ACCOUNT_ITEMS_GL
Problem class....... T    Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abinit
Line................ 1890
Error text.......... ab_chstat
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. TIME_OUT
Technical details
File................ 000989
Position............ 0000261540
Entry type.......... l      ( Error (Module, Row)            )
Message ID.......... AB 0
Variable parts...... ab_chstat                                           abinit 1890
this is the log got from SM21.
The runtime error is time out error
Regards
Ravi

Similar Messages

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Runtime error while executing rule - see long text RSTRAN 301

Hi BW Gurus,
When I executing the DTP, the following error occured.
Runtime error while executing rule -> see long text     RSTRAN     301
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    The argument 'GBP' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP46DQFOYRZTUS0QITMO07IFTS0 1137
Appreciate any useful suggestions.
Thanks in advance.
Maruthi

Guess you are doing some calculation in your routines ..based on Currency Key i.e USD or INR , GBP..etc ..it should be currency value..rather than currency key. Check your field caluclation

Diadem runtime error while executing command "SchemeMeasStar"

Hello:
I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
-Error- DIAdem
Runtime Error While Executing Command "SchemeMeasStar"
Error Type: UNKNOWN
Error Address:00001720
Module Name:GFSBase.Dll
Would you like to give me some suggestions?
thanks very much
jing

Dear MarcusP:
Thank you very much.
your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
Thank you very much.
yours
Jing
Attachments:
DIAdem_Error.doc ‏305 KB

Runtime Error While executing the WebDynpro Application

I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
    No roll storage space of length 9728 available for OCCURS area.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.

Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary

Runtime Error While in Tcode KES1

Hello Team,
We are using ECC6 EhP6.
I am getting a Runtime error while working with Tcode KES1:
Short text
          Syntax error in program "SAPL0KEA ".
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "SAPLSVIM" had to be terminated because it has
          come across a statement that unfortunately cannot be executed.
          The following syntax error occurred in program "SAPL0KEA " in include "L0KEAT00
" in
          line 225:
          "The Dictionary structure or table "*T2580" is either not active or doe"
          "s not exist."
          The include has been created and last changed by:
          Created by: "GAURILAD "
          Last changed by: "SAP* "
          Error in the ABAP Application Program
          The current ABAP program "SAPLSVIM" had to be terminated because it has
          come across a statement that unfortunately cannot be executed.
     Error analysis
          The following syntax error was found in the program SAPL0KEA :
          "The Dictionary structure or table "*T2580" is either not active or doe"
          "s not exist."
     Please help me resolve this issue
Thanks
Saheli

Hi Dnyaneshwar,
   Please execute report RKEAGENV and regenerate operating concern and check if the issue is resolved.
   If not run report RKEAGENF with your operating concern, type of COPA = 1 (costing based) and flag the 'Refill' option. Regenerate the operating concern.
If running report RKEAGENV will cause another error concerning   operating concern E_B1,then please follow the steps in KBA note 1514122
Operating concern should be E_B1 even though you may not be using this operating concern.
regards
Waman

Runtime error while executing SE30 Tcode as CREATE_DATA_ILLEGAL_LENGTH

Hi Guys,
when I am executing a TCode SE30 I am getting following Runtime error .
Runtime Errors         CREATE_DATA_ILLEGAL_LENGTH
Except.                CX_SY_CREATE_DATA_ERROR
Date and Time          23.07.2010 12:28:30
Short text
     CREATE DATA: Illegal value for the length of an object of the type "X"
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_ABAP_TRACE_FILE============CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CREATE_DATA_ERROR', was not
      caught in
     procedure "READ_INFO" "(METHOD)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     A data object of the type "X" with length 0 was to be created using
     CREATE DATA. The value 0 is not within the allowed range.
     Allowed range for the length specification:
     Typ C, N, X: 1 .. 65535
     TYP P:       1 .. 16
Missing RAISING Clause in Interface
Please suggest me the solution .

You have to check that in the object(source code) which you are analysing via SE30 .

Runtime error while executing New Hire action in PA40

Hi All,i am getting short dump while executing PA40 for new hire action typecan anyone look into this and guide as i am new to HCMNote: getting dump only for one user id for rest all other user id i am not getting dump.
Category               ABAP Programming Error
Runtime Errors         SYNTAX_ERROR
ABAP Program           /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time          21.08.2014 14:07:03
Short text
    Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
    include "/1PAPAXX/HDR_21000AO01 " in
    line 52:
    ""LV_LENGTH" has already been declared"
    The include has been created and last changed by:
    Created by: "HCM04 "
    Last changed by: "HCM03 "
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
    You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    The following syntax error was found in the program /1PAPAXX/HDR_21000A :
    ""LV_LENGTH" has already been declared"
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
System environment
    SAP Release..... 731
    SAP Basis Level. 0007
    Application server... "dc-ds-erp"
    Network address...... "172.16.23.111"
    Operating system..... "Linux"
    Release.............. "3.0.13-0.27-default"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "dc-ds-erp"
    Database type..... "ORACLE"
    Database name..... "ECD"
    Database user ID.. "SAPSR3"
    Terminal.......... "NLC-HP"
    Char.set.... "C"
    SAP kernel....... 720
    created (date)... "Sep 14 2013 06:16:24"
    create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
    Database version. "OCI_112, 11.2.0.3.0, V1, default"
    Patch level. 500
    Patch text.. " "
    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
    SAP database version. 720
    Operating system..... "Linux 2.6, Linux 3"
    Memory consumption
    Roll.... 0
    EM...... 37708200
    Heap.... 0
    Page.... 106496
    MM Used. 4666776
    MM Free. 3709976
User and Transaction
    Client.............. 210
    User................ "HCM03"
    Language key........ "E"
    Transaction......... "PA40 "
    Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
    EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
    EPP Connection ID....... 00000000000000000000000000000000
    EPP Caller Counter...... 0
    Program............. "SAPFP50M"
    Screen.............. "MP000000 1000"
    Screen Line......... 3
    Debugger Active..... "none"
Information on where terminated
    Termination occurred in the ABAP program "SAPFP50M" - in
    "GET_HEADER_WITH_TCLAS".
    The main program was "MP000000 ".
    In the source code you have the termination point in line 146
    of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
      EXPORTING
118
           DHDID                    = FHD_HID
119
           BEGDA                    = BEGDA
120
           TCLAS                    = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
*           MOLGA                   =
125
           P0001                    = P0001
126
           PERNR                    = PSPAR-PERNR
127
      IMPORTING
128
           PROG                     = HEADER_PROG
129
           DNUM                     = HEADER_DYNNR
130
       EXCEPTIONS
131
            HEADER_DEACTIVATED          = 1
132
            HEADER_UNKNOWN              = 2
133
            HEADER_GENERATE_DEACTIVATED = 3
134
            HEADER_GENERATE_FAILED      = 4
135
            INTERNAL_ERROR              = 5
136
            OTHERS                      = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
    HEADER_PROG = 'SAPMP50A'.
141
    HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL.                                   "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
    PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
    PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL.                           "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.
149
* Wird mit Einfuehrung des Headerobjekts obsolet.
150
PERFORM REMEMBER_HEADER "                             "XYVPH4K015649
151
    USING HEADER_PROG HEADER_DYNNR 'S'. "               "XYVPH4K015649
152
ENDFORM.
153
154
*       FORM RE588I                                                   *
155
156
157
158
* --> T588I_DHDID                                                   *
159
* --> T588I_MOLGA                                                   *
160
* --> T588I_TCLAS

Implement SAP Note 1004280.. your issue if fixed
If your issue is resolved request you to close the thread or else free feel to touch base
BR
Anil

Portal runtime error while executing BI report through BEx Query designer

I want to execute a query from query designer but when I execute it the following error occurs -
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 04:30_30/04/11_0008_35740651
Refer to the log file for details about this exception.
I have checked log, the error displayig in log is,
ACCESS ERROR: Authorization check for caller assignment to J2EE security role SAP_J2EE_Engine:administrator
Kindly help me.
regards
nk

Dear Friends
I have the same with this problem
Please help us to resolve this problem
Thanks and best regards

ABAP runtime error while executing T.code : PC00_M40_CALC

Hi,
I have applied SAP note 1568264 - Budget Changes 2011 as released by
SAP and i also applied the pre-requiste SAP notes mentioned in the
above SAP note
1) SAP Note 1558475- Amendments to IT calculation notified under
circular:08/2010.
2) SAP Note 1572614- Tax calculations inconsistent for emp. without a
vaild PAN.
3) SAP Note 1575366- HINCALC0:Tax calculation inconsistent in case of
invalid PAN.
After applying the SAP notes, when i am trying to execute the T.Code :
PC00_M40_CALC, i am getting an "Abap runtime error"
" Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "HINCALC0 " in include "PCTAXIN0
" in
line 905:
""ENDUZ-" expected, not "EDU_""
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "S2K_BASIS "
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.   "
Kindly suggest me what has to be done on priority basis.
Regards
Vish

The dump error is generally encountered if your system is at a lower Support Pack level. For implementing Note 1568264 (Budget Changes 2011), you need to be at the below mentioned pre-requisite level corresponding to your Release:
Prerequisites:
   Release     Support Package
     604         HRSP29
     600         HRSP63
     500         HRSP80
     470         HRSPB4
     46C         HRSPG9
The correct sequence to implement the Notes is:
SAP Note 1558475- Amendments to IT calculation notified under
circular:08/2010.
SAP Note 1572614- Tax calculations inconsistent for emp. without a
vaild PAN.
SAP Note 1575366- HINCALC0:Tax calculation inconsistent in case of
invalid PAN.
SAP Note 1568264- Budget Changes 2011
This should solve the issue unless there is some problem while implementing the Notes.
Regards,
Nishtha

RSIMPCURR: Runtime error while executing

Hi Everyone,
I want to create a process chain to transfer global settings from my ECC system to the BI system. For this purpose I was checking the ABAP program RSIMPCURR which is used to transfer the currecny exchange rates. But when this program is executed, it throws a runtime error and ends with a dump.
Here's a snippet of the ABAP dump:
151 CALL FUNCTION 'RSAR_DESTINATION_GET'
152 EXPORTING
153 i_logsys = l_source
154 IMPORTING
155 e_destination = l_destination
156 EXCEPTIONS
157 not_exist = 1
158 OTHERS = 2.
159 IF sy-subrc <> 0.
' >>>>> MESSAGE x000(rh).
161 ENDIF.
162
The thing is, when I manually transfer the currencies from the RSA1 > Source system screen, I'm not facing any issues. Its only while executing the program that I get the dump.
Any suggestions?
Thanks,
Ram

Hi,
I don't think this is a resource issue, because the global settings get transferred when I do it from RSA1 > Source system.
Also the FM 'RSAR_DESTINATION_GET' is the one that throws the exception 'Cannot find destination'. I think this is because I cannot enter the Source System in the program parameters because it is disabled. The other parameters (like 'Exchange Rate type' and 'Changes since') are not disabled and I'm able to enter the selections into those.
Is there anyway that I can enable the source-system box and provide my source system as a location extract the currencies?

Runtime Error while executing Assignment

Hi Experts,
I have 3 fields at 1) ValidStartDate 2) ValidEndDate 3) Item Status.
I have written assignment to check if my current system date and time falls between validstartdate and validenddate, then my Itemstatus field should be active else inactive.
Logic:
If(SYSTIME(0)>=validstartdate AND SYSTIME(0)<=validenddate, Active, Inactive).
SYSTIME(0) Is current system date and time
and my validstartdate and validenddate fields data type is Literal Date
Assignment Field: ItemStatus
Error Message: "A runtime error occurred while evaluating an assignment, validation or calculated field".
Could any one please suggest where went wrong, The same logic is executing sucessfully in validation with TRUE, FALSE.. in place of Active and Inactive.
Thanks in advanced.
Thanks
Bharat

Hi,
we have the same problem:
A runtime error occurred while evaluating an assignment
What is the solution ?
Thank you.
Petr.

Runtime error while executing VA01

Hi All,
I'm getting ABAP dump while executing VA01. Especially while doing variant configurations.
Please have a look into following dump.
Category               ABAP Programming Error
Runtime Errors         SYNTAX_ERROR
ABAP Program           SAPMV45A
Application Component SD-SLS
Date and Time          15.12.2011 00:37:01
     Short text
          Syntax error in program "SAPMV45A ".
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "????????????????????????????????????????" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
          The following syntax error occurred in program "SAPMV45A " in include
           "DI_ESD_SAPMV45A===============E " in
          line 184:
          ""TEXT" has already been declared"
          The include has been created and last changed by:
          Created by: "SAP "
          Last changed by: "SANJAY "
          Error in the ABAP Application Program
          The current ABAP program "????????????????????????????????????????" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
     What can you do?
          Please eliminate the error by performing a syntax check
          (or an extended program check) on the program "SAPMV45A ".
          You can also perform the syntax check from the ABAP Editor.
          If the problem persists, proceed as follows:
          Note down which actions and inputs caused the error.
          To process the problem further, contact you SAP system
          administrator.
          Using Transaction ST22 for ABAP Dump Analysis, you can look
          at and manage termination messages, and you can also
          keep them for a long time.
     Error analysis
          The following syntax error was found in the program SAPMV45A :
          ""TEXT" has already been declared"
     How to correct the error
          Probably the only way to eliminate the error is to correct the program.
          If you cannot solve the problem yourself and want to send an error
          notification to SAP, include the following information:
          1. The description of the current problem (short dump)
             To save the description, choose "System->List->Save->Local File
          (Unconverted)".
          2. Corresponding system log
             Display the system log by calling transaction SM21.
             Restrict the time interval to 10 minutes before and five minutes
          after the short dump. Then choose "System->List->Save->Local File
          (Unconverted)".
          3. If the problem occurs in a problem of your own or a modified SAP
          program: The source code of the program
             In the editor, choose "Utilities->More
          Utilities->Upload/Download->Download".
          4. Details about the conditions under which the error occurred or which
          actions and input led to the error.
     System environment
          SAP Release..... 702
          SAP Basis Level. 0003
          Application server... "SANDERP"
          Network address...... "172.16.1.12"
          Operating system..... "Windows NT"
          Release.............. "6.0"
          Hardware type........ "4x AMD64 Level"
          Character length.... 16 Bits
          Pointer length....... 64 Bits
          Work process number.. 3
          Shortdump setting.... "full"
          Database server... "SANDERP"
          Database type..... "DB6"
          Database name..... "OLS"
          Database user ID.. "SAPOLS"
Thanks in Advance,
Uday

Hi
there is a syntax error in the user exit SAPMV45A created for VA01. Last change was done by sanjay.
Request your abap team to correct the syntax to resolve the issue.
Hope this is useful.
Regards,
Deepak Kori

Runtime error while executing transaction BDLS

Hello,
While executing BDLS transaction for converting logical system names I am getting following error
Runtime Errors CONVT_NO_NUMBER
Except. CX_SY_CONVERSION_NO_NUMBER
Short text
 Unable to interpret "7,160 " as a number.
How to resolve the above problem?

Hi Rachel,
BDLS creates an ABAP program SBDLS* which includes all the tables possibly including logical system names as of the domain behind the table fields. This program firstly
lives in runtime only and is checked by syntax checker.
Now, sometimes tables have inconsistencies associated with them and you
will get this dump when a syntax check is performed on them.
So please check this and regenerate the culprit tables.
So please redo the steps for BDLS and check. There are
probably some tables which could be determined by you (syntax
check - in case program has already been saved only)
An easy way to check this is to run RBDLS2LS program (old BDLS) and
afterwards performing a syntax check on generated RBDLS*** (RBDLS<(>
<<)>(>
<<(><<)>)>ClientName>) program.
Known tables which caused such dumps in the past are:
DFKKCOLFILE_P_W
DFKKKO
DFKKMKO
DFKKREP06
DFKKREP06_S
DFKKREP07
DFKKREV06
DFKKREV07
Simply reactivate the tables you find out in SE11.
Another thing which has lead to this dump in the past is
in your R/3-System the value ' x ' is
additionally added to the value of your current release in the basis
release table SVERS.
The table RSBASIDOC takes the release value from the table SVERS.
If you change value 'x' to your release in both tables (SVERS and
RSBASIDOC) and
and activate again your source system connection. This could solve the
dump too.
I hope, this helps-if not, pls open a message with SAP.(component: BC-MID-ALE)
b.rgds, Bernhard

Error while executing tcode FSE2 "Internal error in program SAPLFIBS no 5"

I am getting below error which while trying to execute tcode FSE2 (Financial statement version). Can't able even go inside the tcode. Please tell how to solve this.
"Internal error in program SAPLFIBS number 5"

Hi Dsr,
Use transaction code OB58->Highlight the Fin. Stmt. version you want to Change and click on the Display icon.->Next, click on the "Fin.Statement items" icon on the application tool bar. You can then expand and carry out your update as appropriate.
If you do not have the prerequisite authorisations, you wouldn't be able to do this.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Runtime error while executing Tcode FAGLL03

Similar Messages

Maybe you are looking for