Runtime error while opeinig window in Web Dynport- ABAP

Hello,
We are having a strange scenario in abap web Dynpro. we are using POWL and users are getting run time error while opening a pop up window for enter some information with the message "nstance of the view W_POP_UP already exists in component". The issue is, this run time error is giving for only users. We tried to debug the issue in their system as well but it is giving run time error with "Debugging_impossible". We alredy tried by clearing the widow instance, but o luck
Could you please help me out in this situation, its really critical and also I did browse before posting this thread, but no use.
Appreciate your <priority normalized by moderator> response......
Regards,
Kumar
Edited by: Vinod Kumar on Jul 25, 2011 12:11 PM

Hi Lakshman,
From the above, I think you are creating an instance of a view. But this instance is already available.
Check your code where this error is occurring while calling lo_window_manager->create_window( ) method?
if so check for the initialness of the view 'W_POP_UP' before this method.
if W_POP_UP is not bound.
W_POP_UP = lo_window_manager->create_window( ).
endif.
Regards,
Ravi

Similar Messages

Error while installing Java on Web AS ABAP on AS/400

Hi ,
I am trying installation of Java Add-Ins on Web AS ABAP.
Installation is being done on IBM iSeries server having operating
system OS/400.
But when I am supplying JDK path in setup , It is showing me
error "Directory given in path is not a valid JDK directory."
I went through all the relevent notes but it could not resolve the
problem.
This error has not occurred while I have done installation on
development system , And Whole installation has been completed
successfully on Development system. But on production system it is
giving this error.
By going thourgh SAPInst_dev.log, It seems me that It is an error in
creating a new stub job by TMKSVR.
Find the following sample log for your reference from sapinst_dev.
TRACE [synxctask.cpp:345]
CSyTaskImpl::start(false)
OS4Trace: "E:\QIBM\ProdData\Java400\jdk14/bin/java" does not exist or
is no Windows executable. Checking remote iSeries host.
TRACE [synxctask.cpp:448]
CSyTaskImpl::start(false)
OS4Trace: "/QIBM/ProdData/Java400/jdk14/bin/java" is an existing IFS
object. Creating remote iSeries process.
TRACE [synxctask.cpp:592]
CSyTaskImpl::start(false)
OS4Trace: Could not create new TMKSVR stub job named "java".
INFO 2006-08-17 14:59:13
CJSlibModule::writeInfo_impl()
Execution of the command "E:\QIBM\ProdData\Java400\jdk14/bin/java '-
version'" finished with status TST_ERROR.
INFO 2006-08-17 14:59:13
CJSlibModule::writeInfo_impl()
Execution of the command "E:\QIBM\ProdData\Java400\jdk14/bin/java '-
version'" finished with return code -1. Output:
This is some portion of error.
Following sentance seems to me , which may be root .
<b>CSyTaskImpl::start(false)
OS4Trace: Could not create new TMKSVR stub job named "java".</b>
And I checked in log files for TMKSVR , There are not stub log files
has been created for this command. So it seems new stub job is not
being created.
I am not able to proceed for installation due to this error.
Please suggest some solution at the earliest.
Regards,
Rajesh Patel
mail to : [email protected]
(m) 001-619-886-4149

Dear, Please check my guide regarding this problem at
http://scn.sap.com/community/netweaver-administrator/blog/2012/07/12/install-tmksvr-and-create-an-installation-share-for-ibm-as400
Best Regards.

Runtime Error While executing the WebDynpro Application

I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
    No roll storage space of length 9728 available for OCCURS area.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.

Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Runtime error while trying to convert script to pdf and sending in mail

Hi all,
I m trying to convert the standard script into pdf using convert_otf fm and trying to send it as an attachment using 'SO_NEW_DOCUMENT_ATT_SEND_API1'.
I m using fm 'SSF_FUNCTION_MODULE_NAME' to get the function module name.
But i m getting a runtime error while executing the program..
Can anyone help me in this issue please.
Thanks in advance,
Ashok

Hi Ramesh,
I m getting an runtime error function module not found. I ll paste the code here.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = lf_formname
    IMPORTING
      fm_name            = lf_fm_name
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc = 0.
error handling ent_retco = sy-subrc.
perform protocol_update_i.
ENDIF.
ls_control_param-getotf = 'X'.
DATA: l_document_output_info TYPE ssfcrespd,
        l_job_output_info TYPE ssfcrescl,
        l_job_output_options TYPE ssfcresop.
check ent_retco eq 0.
CALL FUNCTION 'lf_fm_name'
EXPORTING
    archive_index = toa_dara
    archive_parameters = arc_params
    control_parameters = ls_control_param
    mail_recipient = ls_recipient
    mail_sender = ls_sender
    output_options = ls_composer_param
    user_settings = ' '
    zxekko = l_doc-xekko
    zxpekko = l_doc-xpekko
zxaend = l_doc-xaend
    IMPORTING
      document_output_info = l_document_output_info
      job_output_info = l_job_output_info
      job_output_options = l_job_output_options
      TABLES
        l_xekpo = l_doc-xekpo[]
        l_xekpa = l_doc-xekpa[]
        l_xpekpo = l_doc-xpekpo[]
        l_xeket = l_doc-xeket[]
        l_xtkomv = l_doc-xtkomv[]
        l_xekkn = l_doc-xekkn[]
        l_xekek = l_doc-xekek[]
        l_xaend = l_doc-xaend[]
        l_xkomk = l_xkomk
        EXCEPTIONS
          formatting_error = 1
          internal_error = 2
          send_error = 3
          user_canceled = 4
          OTHERS = 5.
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format                = 'PDF'
      max_linewidth         = 132
    IMPORTING
      bin_filesize          = v_len_in
    TABLES
      otf                   = l_job_output_info-otfdata
      lines                 = tb_pdf
    EXCEPTIONS
      err_max_linewidth     = 0
      err_format            = 1
      err_conv_not_possible = 2
      OTHERS                = 3.

Getting multiple error while refreshing or scheduling WebI report

Hi BO Admin Experts ,
Feacing multiple errors while refreshing or scheduling webi reports in BI4.0 CMC ,
Please find the below errors :
1)report schedule status failed
2)Parameters : xxxcorp-franklinee; ATOu supply unv
Error Message : An internal error occured while calling 'ProcessDPcmndsEx' API (Error:ERR_WIS_30270)
3 ) Format : WebI
Parameters : 10000000000159270
Error Message :CORBA error while communicating with the SL service
Could you please help me on the abive 3 issues for the WebI schedule reports
Cheers ,
Pradeep Gorpadu

Hi,
While refreshing the WEBI Reports would recommend you check the WEBI PROCESSING Server's last changed date from CMC--> Servers.
Check when you are refreshing the reports, do you see the time stamp changed of WEBI PROCESSING servers?
Do you keep getting this error messages for all WEBI reports? Can you re-produce this with simple e-fashion reports as well?
After that go to the node where WEBI PROCESSING servers installed and check on the event viewer details if you see any relevant error messages.
Regards,
Upendra

Runtime Error while summing a column in ALV output

Dear All,
I have developed an ALV Report and the report is giving output without any flaws.
I have defined proper field catalog and displaying the results using REUSE_ALV_GRID function module.
Now the report is generating Runtime Error while the user selects a column and click the SUM icon.
The fields like Qty, or amounts are also theowing runtime error while summing up their column in the ALV output.
What might be the reason and how to resolve this issu?
Regards
Pavan

Hi ,
I don't know how you have write down the code but follow the below coding example:
FOR TOTAL:
there is a property of fieldcatalog, that is do_sum.
USE COED LIKE:
PERFORM fieldcat USING:
'1' 'MATNR' 'I_MARD' 'MATERIAL NO' 'MARD' 'MATNR ' ' ',
'2' 'NETWR' 'I_MARD' 'PLANT' 'MARD' 'WERKS' ' ',
FORM fieldcat USING value(p_0029)
value(p_0030)
value(p_0031)
value(p_0032)
wa_fieldcat-col_pos = p_0029.
wa_fieldcat-fieldname = p_0030.
wa_fieldcat-tabname = p_0031.
wa_fieldcat-reptext = p_0032.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " FIELDCAT
in final output you will get the total of currency field.
FOR SUB TOTAL:
decleare: i_sort type standard table of slis_sortinfo_alv,
wa_sort type slis_t_sortinfo_alv.
wa_sort-spos = '1'.
wa_sort-fieldname = 'field1'.
wa_sort-subtot = 'X'.
append wa_tab to i_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fieldcat
it_sort = i_sort
Hope this can solve your pbs.
If you need more inputs let me know.
Regards,
Tutun

Runtime error while posting a document (FB70/FBS1)

Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?

Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa.

Getting Runtime Error while Activating Characteristics in BW sandbox system

Hi, i m getting runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
Short Text
SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
Runtime Errors DBIF_REPO_SQL_ERROR
even if creating a new Characteristics same error is comming.
Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
Edited by: kush kumar on Mar 23, 2010 11:56 AM

Hi,
Follow bellow steps:
a) Once check the Lock entries by useing SM13.
Goto SM13--> Select your object lock entries --> Select delete.
b). Acitvate the Infoobject.
Regards.

Runtime error while executing rule - see long text RSTRAN 301

Hi BW Gurus,
When I executing the DTP, the following error occured.
Runtime error while executing rule -> see long text     RSTRAN     301
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    The argument 'GBP' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP46DQFOYRZTUS0QITMO07IFTS0 1137
Appreciate any useful suggestions.
Thanks in advance.
Maruthi

Guess you are doing some calculation in your routines ..based on Currency Key i.e USD or INR , GBP..etc ..it should be currency value..rather than currency key. Check your field caluclation

Java runtime error while executing install.sh - installing Oracle Clinical 4i

Hello DBA's
1. I am trying to install an Oracle App on a SUN SPARC 20 with 256 MB / 9.1
GB. (solaris 8)
2. I installed Oracle 8i EE completely and created the DB using Oracle
Universal Installer. So the Java components and runtime were also installed
I presume. I have it in /usr/java1.2 with links made during install.
3. Did post installation according to the manual.
4. Did pre-installation for install of Oracle Clinical application.
5. Put the OC CD into the drive and typed install.sh as requested.
Error: The Java Runtime environment was not found at
.. /../stage/Components/oracle.swd.jre/1.1.8.10/1/Datafiles/Expanded/solaris/bin/
jre Hence the universal installer cannot be run.
I am struggling for 2 months now and I am hoping that some guru will wipe
out the frustration and anxiety that has made my hair grey. I have also
included the contents of the oraparam.ini for Oracle 8i and Oracle CLinical.
They look almost the same but for some reason, the Oracle Universal
installer does not seem to work for the Oracle Clinical installation.
What could be the reason for this Jav runtime Error. I check the web and
other sites, but no conceivable answer. I have no access to Metalink. What
do I have to do to make the universal installer work.
Your help is really really appreciated.
============================================================
ORAPARAM.ini used when installing Oracle 8i 8.1.6.2
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.jar
JRE_LOCATION=../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expande
d/jre
OUI_LOCATION=../stage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expa
nded
HLP_LOCATION=
EWT_LOCATION=
DEFAULT_HOME_LOCATION=
NLS_ENABLED=FALSE
NO_BROWSE=/net
JRE_MEMORY_OPTIONS=-mx48m
[IMAGES]
FILE1=images/o8i_1.gif
FILE2=images/o8i_2.gif
FILE3=images/o8i_3.gif
FILE4=images/o8i_4.gif
FILE5=images/o8i_5.gif
FILE6=images/o8i_6.gif
FILE7=images/o8i_7.gif
FILE8=images/o8i_8.gif
===========================================================
ORAPARAM.ini used when installing Oracle Clinical 4i
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../../stage/products.jar
LICENSE_LOCATION=
JRE_LOCATION=../../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expa
nded
/jre
OUI_LOCATION=../../stage/Components/oracle.swd.oui/1.7.0.19.0/1/DataFiles/Ex
panded
JRE_MEMORY_OPTIONS=" -mx32m"
DEFAULT_HOME_LOCATION=
DEFAULT_HOME_NAME=OUIHome
NO_BROWSE=/net
HLP_LOCATION=
EWT_LOCATION=
NLS_ENABLED=TRUE
BOOTSTRAP=FALSE
OUI_VERSION=1.7.0.19.0
[IMAGES]
FILE1=images/installAd0.gif
FILE2=images/installAd1.gif
=========================================================

Hi
May be you can check the Redhat FTP site.
CentOS 4.6, 32-bit
http://isoredirect.centos.org/centos/4.6/isos/i386/
CentOS 4.6, 64-bit
http://isoredirect.centos.org/centos/4.6/isos/x86_64/
CentOS 5.1, 32-bit
http://isoredirect.centos.org/centos/5.1/isos/i386/
CentOS 5.1, 64-bit
http://isoredirect.centos.org/centos/5.1/isos/x86_64/
Regards
Mudhalvan M.M

Diadem runtime error while executing command "SchemeMeasStar"

Hello:
I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
-Error- DIAdem
Runtime Error While Executing Command "SchemeMeasStar"
Error Type: UNKNOWN
Error Address:00001720
Module Name:GFSBase.Dll
Would you like to give me some suggestions?
thanks very much
jing

Dear MarcusP:
Thank you very much.
your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
Thank you very much.
yours
Jing
Attachments:
DIAdem_Error.doc ‏305 KB

Error while using window.open() in JSP page

I am getting error while using window.open() in my JSP page.
This is code in my JSP page,
<h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
function loadContextSensitiveHelp(helpPageName) {
top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
'width=350,height=250'
+',menubar=0'
+',toolbar=0'
+',status=0'
+',scrollbars=1'
+',resizable=0')
top.consoleRef.document.close()
I am getting the following error in my browser,
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
     org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
     org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
     org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
     com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
Anyone help me to solve this issue. Thanks............................

I am getting error while using window.open() in my JSP page.
This is code in my JSP page,
<h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
function loadContextSensitiveHelp(helpPageName) {
top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
'width=350,height=250'
+',menubar=0'
+',toolbar=0'
+',status=0'
+',scrollbars=1'
+',resizable=0')
top.consoleRef.document.close()
I am getting the following error in my browser,
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
     org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
     org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
     org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
     com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
Anyone help me to solve this issue. Thanks............................

Getting Portal Runtime Error while accessing one link in Portal Page.

Hi,
Can anyone tell why I am getting below error while accessing one of the portal page link:
" Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 01:19_27/02/09_0046_16441150
Refer to the log file for details about this exception. "
Also please let me know how to get rid of this if possible.
Thanks in Advance
Vaibhav Srivastava

Thank you for your prompt reply.
Could you please elaborate the same.
I am getting Portal runtime error while I am acessing an iveiw in E-recruiting. We have setup the role and user in both portal and Backend. But still the error. Could you pls send me the setting you have done.
Portal runtime ERROR
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 02:27_27/04/09_0042_113148050
Refer to the log file for details about this exception.
regards
Justin

Runtime Error while using Dynamic Selection

Hi,
We are getting a runtime error while using a dynamic selection. One of the fields has got an apostrophe in the middle of the text and so the condition is returning an error SAPSQL_WHERE_PARANTHESES.
Let's say the value in the field is SCV's. So the WHERETAB is filled as 'SCV's' or `SCV's`. An exception is caught in this case as there is no closing apostrophe.
Let us know if anyone has come across a similar issue and any help is appreciated.
Regards,
Sarves

Hi Sarves,
as Rob said.
check also the [ORACLE FAQS|http://www.orafaq.com/faq/how_does_one_escape_special_characters_when_writing_sql_queries] or [SQL SERVER u2013 How to Escape Single Quotes|http://blog.sqlauthority.com/2008/02/17/sql-server-how-to-escape-single-quotes-fix-error-105-unclosed-quotation-mark-after-the-character-string/]
Honestly: Before posting here and getting a whole lot of more or less useless comments just use your favorite search engine.
Regards,
Clemens

Runtime error while opeinig window in Web Dynport- ABAP

Similar Messages

Maybe you are looking for