Runtime error while putting negative value in to table control field
Hi Guys,
I am working on a Table Control which has Currency
and quantity fields.In PBO when the program is trying put a
negative value then It is going into a runtime error.
The Error description is,
Runtime errors DYNPRO_FIELD_CONVERSION
Error analysis
The program flow was interrupted and could not be resumed.
Program "SAPMZDBPRJCTEDFIG" tried to display fields on screen 0100. However, an
error occurred while this data was being converted.
How to correct the error
A conversion error occurred while the program was trying to display data on the screen.
The ABAP output field and the screen field may not have the same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
Screen name.............. "SAPMZDBPRJCTEDFIG"
Screen number............ 0100
Screen field............. "ZDB_PROJCTD_FIG-ZWORKDONE"
Error text............... "FX015: Sign lost." Further data:
I have tried increase the screen field length to more than the ABAP program field length and the scrren field name is of data type which supports signed value.
But still I am getting the error.the error is 'Sign is lost'.
I would appreaciate if you can help me with this.
Correct answer will be rewarded.
Thank you in advance,
Sanujit Acharya
Check The Forum
Re: PA-BN : "FX015: Sign lost." dump
Kanagaraja L
Similar Messages
-
Portal Runtime Error while clicking on value selector
Hi,
I am facing problem while clicking on value selector on Picklist search iview and also any lookup table value selector.
If I assign the same role to my portal user(Admin rights) working fine...but if I assign it to end users...not accessible on popup and giving portal runtime error.
Currently i have assigned standard "eu_role" to the end users...Do I need to give any special permissions to some of end users?
Appreciate all your help in this regard.
Thanks,
PoojaSystem Administration > Permission > Security Zones >
com.sap.pct.mdm.appl.masterviews > high_safety >
com.sap.pct.mdm.appl.masterviews > low_safety >
com.sap.pct.mdm.tech.systems > high_safety
com.sap.pct.mdm.tech.wizards > high_safety
give Read / Write and End User access to the custom role/standard role that has to access MDM Views.
Regards,
Nitin -
Error while saving date value in Java dictionary
Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
BhavikHi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: <b>target_date</b>
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
int l_year;
int l_month;
int l_days;
l_year = target_Date.getYear();
l_month = target_Date.getMonth();
l_days = target_Date.getDate();
Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik -
Runtime Error while summing a column in ALV output
Dear All,
I have developed an ALV Report and the report is giving output without any flaws.
I have defined proper field catalog and displaying the results using REUSE_ALV_GRID function module.
Now the report is generating Runtime Error while the user selects a column and click the SUM icon.
The fields like Qty, or amounts are also theowing runtime error while summing up their column in the ALV output.
What might be the reason and how to resolve this issu?
Regards
PavanHi ,
I don't know how you have write down the code but follow the below coding example:
FOR TOTAL:
there is a property of fieldcatalog, that is do_sum.
USE COED LIKE:
PERFORM fieldcat USING:
'1' 'MATNR' 'I_MARD' 'MATERIAL NO' 'MARD' 'MATNR ' ' ',
'2' 'NETWR' 'I_MARD' 'PLANT' 'MARD' 'WERKS' ' ',
FORM fieldcat USING value(p_0029)
value(p_0030)
value(p_0031)
value(p_0032)
wa_fieldcat-col_pos = p_0029.
wa_fieldcat-fieldname = p_0030.
wa_fieldcat-tabname = p_0031.
wa_fieldcat-reptext = p_0032.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " FIELDCAT
in final output you will get the total of currency field.
FOR SUB TOTAL:
decleare: i_sort type standard table of slis_sortinfo_alv,
wa_sort type slis_t_sortinfo_alv.
wa_sort-spos = '1'.
wa_sort-fieldname = 'field1'.
wa_sort-subtot = 'X'.
append wa_tab to i_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fieldcat
it_sort = i_sort
Hope this can solve your pbs.
If you need more inputs let me know.
Regards,
Tutun -
Runtime error while executing rule - see long text RSTRAN 301
Hi BW Gurus,
When I executing the DTP, the following error occured.
Runtime error while executing rule -> see long text RSTRAN 301
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'GBP' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP46DQFOYRZTUS0QITMO07IFTS0 1137
Appreciate any useful suggestions.
Thanks in advance.
MaruthiGuess you are doing some calculation in your routines ..based on Currency Key i.e USD or INR , GBP..etc ..it should be currency value..rather than currency key. Check your field caluclation
-
Runtime Error while using Dynamic Selection
Hi,
We are getting a runtime error while using a dynamic selection. One of the fields has got an apostrophe in the middle of the text and so the condition is returning an error SAPSQL_WHERE_PARANTHESES.
Let's say the value in the field is SCV's. So the WHERETAB is filled as 'SCV's' or `SCV's`. An exception is caught in this case as there is no closing apostrophe.
Let us know if anyone has come across a similar issue and any help is appreciated.
Regards,
SarvesHi Sarves,
as Rob said.
check also the [ORACLE FAQS|http://www.orafaq.com/faq/how_does_one_escape_special_characters_when_writing_sql_queries] or [SQL SERVER u2013 How to Escape Single Quotes|http://blog.sqlauthority.com/2008/02/17/sql-server-how-to-escape-single-quotes-fix-error-105-unclosed-quotation-mark-after-the-character-string/]
Honestly: Before posting here and getting a whole lot of more or less useless comments just use your favorite search engine.
Regards,
Clemens -
Runtime error "1101" invalid resource value.
Hi there I am getting this error message "runtime error "1101" invalid resource value" while I am trying to run my vba to populate my "Work" field. It was working fine for other files.But as soon as I started a new file
with same columns and fields and more projects , I started getting this message.Could anyone please tell me what is going on.I tried by fixing my resource values but still doesn't work.I will really appreciate your help.Thanks in advance.robeenclarke,
What do you mean you tried fixing your resource values? Give us an example of your resource name and work value.
Also, it would be helpful to see the line of code that gave the message.
John -
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas. -
Getting the following error while parsing the values usng xml parser
Hi
I am getting the following error while parsing the values using the code in r12 instance on linux
declare
XML_PARSER XMLPARSER.PARSER;
DOC XMLDOM.DOMDOCUMENT;
DOCELEMENT DBMS_XMLDOM.DOMELEMENT;
BEGIN
-- NEW PARSER
XML_PARSER := XMLPARSER.NEWPARSER;
-- SET SOME CHARACTERISTICS
XMLPARSER.SETVALIDATIONMODE(XML_PARSER, FALSE);
IF P_DIR IS NOT NULL AND P_FILENAME IS NOT NULL
THEN
FND_FILE.PUT_LINE(FND_FILE.LOG,'DIRECTORY FOUND'||'-'||P_DIR);
XMLPARSER.SETBASEDIR(XML_PARSER, P_DIR);
-- PARSE INPUT FILE
FND_FILE.PUT_LINE(FND_FILE.LOG,'FILE FOUND'||'-'||P_FILENAME);
XMLPARSER.PARSE(XML_PARSER, P_DIR || '/' || P_FILENAME);
-- GET DOCUMENT
DOC := XMLPARSER.GETDOCUMENT(XML_PARSER);
LOAD_SUPP(doc);
ELSE
DBMS_OUTPUT.PUT_LINE('DIRACTORY/FILENAME CANNOT BE NULL');
END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('DATA NOTINSERTED'||sqlerrm);
ROLLBACK;
END
I am getting the following error
DIRACTORYL-/home/appldevORA-0000: normal, successful completion
FILE NAME-suppliersample_data.xmlORA-0000: normal, successful completion
DATA NOTINSERTEDORA-31001: Invalid resource handle or path name "/home/appldev/suppliersample_data.xml"
ORA-06512: at "SYS.XDBURITYPE", line 11
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 142
ORA-29280: invalid directory path
ORA-29280: invalid directory path
ORA-29280: invalid directory path
It could be great if some one could give a suggestion/solution.
Thanks
AjeshBesides this is not the correct forum try to google the error message first before posting:
http://ora-29280.ora-code.com/
cheers -
Runtime error while trying to convert script to pdf and sending in mail
Hi all,
I m trying to convert the standard script into pdf using convert_otf fm and trying to send it as an attachment using 'SO_NEW_DOCUMENT_ATT_SEND_API1'.
I m using fm 'SSF_FUNCTION_MODULE_NAME' to get the function module name.
But i m getting a runtime error while executing the program..
Can anyone help me in this issue please.
Thanks in advance,
AshokHi Ramesh,
I m getting an runtime error function module not found. I ll paste the code here.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc = 0.
error handling ent_retco = sy-subrc.
perform protocol_update_i.
ENDIF.
ls_control_param-getotf = 'X'.
DATA: l_document_output_info TYPE ssfcrespd,
l_job_output_info TYPE ssfcrescl,
l_job_output_options TYPE ssfcresop.
check ent_retco eq 0.
CALL FUNCTION 'lf_fm_name'
EXPORTING
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = ' '
zxekko = l_doc-xekko
zxpekko = l_doc-xpekko
zxaend = l_doc-xaend
IMPORTING
document_output_info = l_document_output_info
job_output_info = l_job_output_info
job_output_options = l_job_output_options
TABLES
l_xekpo = l_doc-xekpo[]
l_xekpa = l_doc-xekpa[]
l_xpekpo = l_doc-xpekpo[]
l_xeket = l_doc-xeket[]
l_xtkomv = l_doc-xtkomv[]
l_xekkn = l_doc-xekkn[]
l_xekek = l_doc-xekek[]
l_xaend = l_doc-xaend[]
l_xkomk = l_xkomk
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = l_job_output_info-otfdata
lines = tb_pdf
EXCEPTIONS
err_max_linewidth = 0
err_format = 1
err_conv_not_possible = 2
OTHERS = 3. -
Runtime error while posting a document (FB70/FBS1)
Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa. -
Getting Runtime Error while Activating Characteristics in BW sandbox system
Hi, i m getting runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
Short Text
SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
Runtime Errors DBIF_REPO_SQL_ERROR
even if creating a new Characteristics same error is comming.
Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
Edited by: kush kumar on Mar 23, 2010 11:56 AMHi,
Follow bellow steps:
a) Once check the Lock entries by useing SM13.
Goto SM13--> Select your object lock entries --> Select delete.
b). Acitvate the Infoobject.
Regards. -
Diadem runtime error while executing command "SchemeMeasStar"
Hello:
I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
-Error- DIAdem
Runtime Error While Executing Command "SchemeMeasStar"
Error Type: UNKNOWN
Error Address:00001720
Module Name:GFSBase.Dll
Would you like to give me some suggestions?
thanks very much
jingDear MarcusP:
Thank you very much.
your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
Thank you very much.
yours
Jing
Attachments:
DIAdem_Error.doc 305 KB -
Runtime Error While executing the WebDynpro Application
I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
No roll storage space of length 9728 available for OCCURS area.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary -
Getting Portal Runtime Error while accessing one link in Portal Page.
Hi,
Can anyone tell why I am getting below error while accessing one of the portal page link:
" Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 01:19_27/02/09_0046_16441150
Refer to the log file for details about this exception. "
Also please let me know how to get rid of this if possible.
Thanks in Advance
Vaibhav SrivastavaThank you for your prompt reply.
Could you please elaborate the same.
I am getting Portal runtime error while I am acessing an iveiw in E-recruiting. We have setup the role and user in both portal and Backend. But still the error. Could you pls send me the setting you have done.
Portal runtime ERROR
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 02:27_27/04/09_0042_113148050
Refer to the log file for details about this exception.
regards
Justin
Maybe you are looking for
-
Siri no longer works on my iPhone 4 after upgrading to iOS5, is that how it should be?
After upgrading my iPhone 4 to iOS5, the Siri application no longer works on my iPhone. Is that what should have happened? The app starts but then I get a message saying "Sorry, a problem occurred receiving response from the server."
-
How to setup a contact on my website
How to setup a contact on my wesite
-
How to pass parameters to configuration files
Hello, I have an application which uses several libraries and frameworks like log4j and hibernate. Each library/framework is configured via its own configuration file, some configuration files are in xml format and others are in properties format. Ea
-
Can't set up RAID0 on SATA ports 1&2 or 3&4???
I have two 80gig Maxtor's which I want to use in Raid0. I have tried connecting them to ports 1&2 or 3&4 but windows xp installation doesn't like it, even after pressing F6 and installing the raid drivers of the floppy, it gets so far then displays t
-
Unable to start Weblogic Server
Hi, I have installed the Weblogic server 10.3.5 and SOA 11.1.1.6.0 in the same Middleware directory. I have also created a domain sucessfully. When i try to start the Weblogic server it ends in Errors. Below are the log details, any help would be gre