Runtime Error while updati9ng a standard sap table - fagl_saplinfo_val.
Hi,
I am facing a problem in updating a standard sap table through a z program. The table name is fagl_saplinfo_val.
Error description is:
Termination occurred in the ABAP program "ZMIGR_PCA_COPY" - in
"SUB_POST-CUSTOMER_DATA".
The main program was "ZMIGR_PCA_COPY ".
In the source code you have the termination point in line 644
of the (Include) program "ZMIGR_PCA_COPY".
The program "ZMIGR_PCA_COPY" was started as a background job.
Job Name....... "ZMIGR_PCA_COPY"
Job Initiator.. "BASAKK"
Job Number..... 10485700
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "SUB_POST-CUSTOMER_DATA" "(FORM)", but it was neither handled locally
nor declared in the RAISING clause of its signature.
The procedure is in program "ZMIGR_PCA_COPY "; its source code begins in line
631 of the (Include program "ZMIGR_PCA_COPY ".
Is it related to non availability of space in that standard sap table?
kindly suggest me the solution to this as soon as possible. Its vvvvv urgent!!!
Regards,
Panchali.
Thanks Lakshman!
I debug the program.There is no BDC used update.In this program after taking the data from excel sheet one internal table is prepared and this internal table is directly used to insert data into z table.This is the last code which executes.
INSERT zmmpoamend FROM TABLE t_zmmpo_amend_tab.
IF sy-subrc EQ '0'.
MESSAGE 'Data Upload Successfully completed' TYPE 'S'.
ELSE.
ROLLBACK WORK.
MESSAGE 'Data Upload failed ' TYPE 'E'.
ENDIF.
CLEAR t_zmmpo_amend_tab.
REFRESH t_zmmpo_amend_tab.
Is it possible to configure z table using SPRO tcode,such that this z tables data will go to standard table and then we can see it in the standard tcode?
I am not sure but it's just a guess.
Similar Messages
-
Runtime error while trying to convert script to pdf and sending in mail
Hi all,
I m trying to convert the standard script into pdf using convert_otf fm and trying to send it as an attachment using 'SO_NEW_DOCUMENT_ATT_SEND_API1'.
I m using fm 'SSF_FUNCTION_MODULE_NAME' to get the function module name.
But i m getting a runtime error while executing the program..
Can anyone help me in this issue please.
Thanks in advance,
AshokHi Ramesh,
I m getting an runtime error function module not found. I ll paste the code here.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc = 0.
error handling ent_retco = sy-subrc.
perform protocol_update_i.
ENDIF.
ls_control_param-getotf = 'X'.
DATA: l_document_output_info TYPE ssfcrespd,
l_job_output_info TYPE ssfcrescl,
l_job_output_options TYPE ssfcresop.
check ent_retco eq 0.
CALL FUNCTION 'lf_fm_name'
EXPORTING
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = ' '
zxekko = l_doc-xekko
zxpekko = l_doc-xpekko
zxaend = l_doc-xaend
IMPORTING
document_output_info = l_document_output_info
job_output_info = l_job_output_info
job_output_options = l_job_output_options
TABLES
l_xekpo = l_doc-xekpo[]
l_xekpa = l_doc-xekpa[]
l_xpekpo = l_doc-xpekpo[]
l_xeket = l_doc-xeket[]
l_xtkomv = l_doc-xtkomv[]
l_xekkn = l_doc-xekkn[]
l_xekek = l_doc-xekek[]
l_xaend = l_doc-xaend[]
l_xkomk = l_xkomk
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = l_job_output_info-otfdata
lines = tb_pdf
EXCEPTIONS
err_max_linewidth = 0
err_format = 1
err_conv_not_possible = 2
OTHERS = 3. -
Runtime Error while summing a column in ALV output
Dear All,
I have developed an ALV Report and the report is giving output without any flaws.
I have defined proper field catalog and displaying the results using REUSE_ALV_GRID function module.
Now the report is generating Runtime Error while the user selects a column and click the SUM icon.
The fields like Qty, or amounts are also theowing runtime error while summing up their column in the ALV output.
What might be the reason and how to resolve this issu?
Regards
PavanHi ,
I don't know how you have write down the code but follow the below coding example:
FOR TOTAL:
there is a property of fieldcatalog, that is do_sum.
USE COED LIKE:
PERFORM fieldcat USING:
'1' 'MATNR' 'I_MARD' 'MATERIAL NO' 'MARD' 'MATNR ' ' ',
'2' 'NETWR' 'I_MARD' 'PLANT' 'MARD' 'WERKS' ' ',
FORM fieldcat USING value(p_0029)
value(p_0030)
value(p_0031)
value(p_0032)
wa_fieldcat-col_pos = p_0029.
wa_fieldcat-fieldname = p_0030.
wa_fieldcat-tabname = p_0031.
wa_fieldcat-reptext = p_0032.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " FIELDCAT
in final output you will get the total of currency field.
FOR SUB TOTAL:
decleare: i_sort type standard table of slis_sortinfo_alv,
wa_sort type slis_t_sortinfo_alv.
wa_sort-spos = '1'.
wa_sort-fieldname = 'field1'.
wa_sort-subtot = 'X'.
append wa_tab to i_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fieldcat
it_sort = i_sort
Hope this can solve your pbs.
If you need more inputs let me know.
Regards,
Tutun -
Runtime Error While in Tcode KES1
Hello Team,
We are using ECC6 EhP6.
I am getting a Runtime error while working with Tcode KES1:
Short text
Syntax error in program "SAPL0KEA ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPL0KEA " in include "L0KEAT00
" in
line 225:
"The Dictionary structure or table "*T2580" is either not active or doe"
"s not exist."
The include has been created and last changed by:
Created by: "GAURILAD "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPL0KEA :
"The Dictionary structure or table "*T2580" is either not active or doe"
"s not exist."
Please help me resolve this issue
Thanks
SaheliHi Dnyaneshwar,
Please execute report RKEAGENV and regenerate operating concern and check if the issue is resolved.
If not run report RKEAGENF with your operating concern, type of COPA = 1 (costing based) and flag the 'Refill' option. Regenerate the operating concern.
If running report RKEAGENV will cause another error concerning operating concern E_B1,then please follow the steps in KBA note 1514122
Operating concern should be E_B1 even though you may not be using this operating concern.
regards
Waman -
Creating a new Search Help on a standard SAP table field?
Good day, everyone!
As part of a report I am writing, the customer would like to have Search Help added to the AUFEX field in table AUFK. They would like this functionality so that when they are changing an order via t-code ko02, they can get a list of valid values to put in field AUFEX. I would like to tie it to a zTable I've created; in my zTable, I have just 2 fields: a key value (that will go into AUFEX) and a text description of the key value. This zTable is used in my report.
While I've created a Search Help on this table already for table maintenance, I've never added a custom Search Help to an existing standard SAP table field before. I've done some Googling and other searching to see what I need to know, but I've only been able to find information on Collective Search Helps. AUFEX doesn't yet have a Search Help field, so I don't think Collective Search Helps is my answer.
Is this possible? Can I add a custom Search Help to a standard SAP table field that doesn't have any Search Help linked to it yet? Is there an existing thread or guide somewhere that can tell me how to do this?
Thank you!Hi
Yes u can: u can assign the search help to (A) data element livel or (B) field table livel.
After creating your search help:
A) Run SE11, insert your data element (AUFEX), press edit and insert the search help in "Search Help" area on DEFINATION tab;
B) Run SE11, insert your table (AUFK), press edit, place the cursor on your field (AUFEX) and go to GoTo->Search help->for field
But u should consider it'll mean to change a standard object for both cases: so u need to get the access key from your OSS.
Max -
Runtime error while running a DTP
I have changed a keyfigure from integer to fltp. now i try loading the masterdata for some object which consists this keyfigure as an attribute.
the data is loaded successfully in PSA and while runnng the dtp i get a dump with the message that "Runtime Errors OBJECTS_TABLES_NOT_COMPATIBLE"
"Short text:
Two internal tables are neither compatible nor convertible."
Please suggest what actions need to be taken to rectify this error.Hi Ajeet,
Thanks for the reply.
When i see my data source...
the Type in dataSource shown is FLTP 8 and type from Source system is NUMBER 22 for this field
in transformation its showing FLTP8 [source] ---> FLTP8 [target] for this particular rule.
please let me know if i am missing on some information. -
Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
NSMutableDictionary *properties = [NSMutableDictionary dictionary];
[properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
[properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
[self.session createDocumentFromInputStream:inputStream
mimeType:@"image/png"
properties:properties
inFolder:salesOrderRouteMapFolderId
bytesExpected:[imageData length]
completionBlock:^(NSString *objectId, NSError *error) {
NSLog(@"Object id is %@",objectId);
if(error == nil) {
[inputStream close];
NSLog(@"Uploading Sales order route map successfully.");
[[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
} else {
[inputStream close];
NSLog(@"Uploading sales order route map failed.");
[[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
} progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
properties:(CMISProperties *)properties
contentInputStream:(NSInputStream *)contentInputStream
contentMimeType:(NSString *)contentMimeType
bytesExpected:(unsigned long long)bytesExpected
cmisRequest:(CMISRequest*)request
completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
// Validate param
if (link == nil) {
CMISLogError(@"Must provide link to send atom entry");
if (completionBlock) {
completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
return;
// generate start and end XML
CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
writer.cmisProperties = properties;
writer.mimeType = contentMimeType;
NSString *xmlStart = [writer xmlStartElement];
NSString *xmlContentStart = [writer xmlContentStartElement];
NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
NSString *xmlContentEnd = [writer xmlContentEndElement];
NSString *xmlProperties = [writer xmlPropertiesElements];
NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
// The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
// the fly to support very large files.
[self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
httpMethod:httpRequestMethod
session:self.bindingSession
inputStream:contentInputStream
headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
bytesExpected:bytesExpected
cmisRequest:request
startData:startData
endData:endData
useBase64Encoding:YES
completionBlock:^(CMISHttpResponse *response, NSError *error) {
if (error) {
CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
if (completionBlock) {
completionBlock(nil, error);
} else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
if (completionBlock) {
NSError *parseError = nil;
CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
[atomEntryParser parseAndReturnError:&parseError];
if (parseError == nil) {
completionBlock(atomEntryParser.objectData, nil);
} else {
CMISLogError(@"Error while parsing response: %@", [parseError description]);
completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
} else {
CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
if (completionBlock) {
completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip -
Error while Activating the Standard DSO
Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya. -
Error while deriving the currency from table
i am getting the below error while simulating the payroll for india.
Error while deriving the currency from table T001P & Error during Initialization of payroll.
i am SAP HCM Trainee.. practicing at home.Pls check the currency in table T500C.
You can use TCode OE00 for table maintenance T500C.
Also check whether currency is there in table V_CURC and T510.
Hope this will help.
Regards
Ghouse -
Runtime Error While executing the WebDynpro Application
I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
No roll storage space of length 9728 available for OCCURS area.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary -
BAPI_ALM_ORDER_MAINTAIN - Error while reading the standard sequence
Hi all,
I am using BAPI_ALM_ORDER_MAINTAIN to add the task list to the order without deleting the existing operations but BAPI_ALM_ORDER_MAINTAIN is giving the error - Error while reading the standard sequence from the document. Please help asap.
Thanks,
RituI Solved this form.
Table I_N_METHODS
REFNUMBER OBJECTTYPE METHOD OBJECTKEY
000001 SAVE 000001000069
000001 OPERATION CREATE 0000010000690170
000002 OPERATION CREATE 0000010000690180
000003 OPERATION CREATE 0000010000690190
000004 OPERATION CREATE 0000010000690200
000005 OPERATION CREATE 0000010000690210
Edited by: Yonatan Edgardo Diaz on Apr 16, 2010 4:01 PM -
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas. -
Error while selecting date from external table
Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2 SE_CUST_ID NUMBER(38),
3 SE_TRAN_AMT_LCY FLOAT(126),
4 SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6 TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY ext_tables
8 ACCESS PARAMETERS (
9 RECORDS DELIMITED BY NEWLINE
10 FIELDS TERMINATED BY ','
11 MISSING FIELD VALUES ARE NULL
12 (
13 country_code CHAR(5),
14 country_name CHAR(50),
15 country_language CHAR(50)
16 )
17 )
18 LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell -- -
Is there any standard SAP table which stores the license number assigned to a delivery item
Hi Experts,
This is in relation to license number assigned to a delivery item under ‘Export License Log’. Our scenario is for delivery of type NLCC created for an inter-company stock transport order. (i.e.not a sales order case where the license may get copied from sales order to delivery through copy control)
As we understand, for legal control – relevant scenarios, export license for each item shall be determined afresh every time the delivery is accessed. (Depending on legal regulation, grouping, destination country, export control class, delivery partners vis-à-vis license master customer assignments etc.)
To print the license text on one of the delivery output types, we want to access the license number for each item. (determined under export license log)
Our question is: is there any standard SAP table which stores the license number assigned to a delivery item?
We have checked some of the license tables (T606*, VAEX, EMXX etc.) but couldn’t get any specific table storing delivery-item-specific license data.
Helpful answers Text Removed
Regards,
Jagan
Message was edited by: G Lakshmipathi
Dont add such text in your postHi Lakshmipathi,
The export control log can be accessed by going to delivery Extras-> Export license log
We need a table that stores the determined license for each item in a delivery document ( as shown in the below screenshot)
Regards,
Jagan -
Runtime error while posting a document (FB70/FBS1)
Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa.
Maybe you are looking for
-
Cant update my ipod. unknown error (-69)
when i try to update my ipod, after a few songs are added i get this error: Attempting to copy the disk "" failed. an unknown error occured (-69) and then the updating stops. this always happens when there is only 4 gig on my ipod (and i have a 10 gi
-
Exceptions...don't understand, please help!
Desperately seeking help! these exceptions are thrown when I get to a button that uses values entered in a table to do some math and plot a graph Exception occurred during event dispatching: java.lang.ArrayIndexOutOfBoundsException at CUTT_Analyser_E
-
5 year Customer thinking of switching to AT&T
I have been a very loyal customer of Verizon Wireless for 5 years now and have loved the customer service and all the equipment we have purchased over the years until now! The first week of November 2010, I went in to my normal Verizon Store and upgr
-
Asha 200 bug - wrong number in international call
Hello, Today I have experienced international call (from The Netherlands). The remote telephone number shown in the displayer begun with +4831 instead of +31 (48 is my country code, and 31 is Dutch country code), so whole was too long. Maybe it is on
-
Lightroom KEYWORDS searchable in SPOTLIGHT?
I was looking through the discussion boards but couldn't find an answer...here's my question. If I enter keywords into Adobe Lightroom and save the metadata back to the original file, can spotlight search by these keywords??? I know in Tiger this did