Runtime error with Configurable products in B2c Webshop
Hi Experts,
We are on CRM 6.0. On selection of proceed to check out with configurable products we are getting the following runtime error
URL: http://Host:port/b2c/appbase/layout/genericLayout.jsp
JCO Exception: COMMAND_EXCEPTION Function: CFG_API_GET_CONFIG_INFO Import Parameters: |--|-| | PARAMETERS 'INPUT' ||-| |CONFIG_ID|G| ||-| | |0| ||-| |I20F13BDE|T| |--|-| I20F13BDE2AF6F105AB85001517539621/20F13BDE2AF6F106AB85001517539621
We have created configurable product in R/3. Pulled that data to CRM and these products have been added to the catalog.
Are we missing any additional configuration required for configurable products??
Thanks in advance,
Srinivas.
Hi Ram,
We just downloaded configurable products from ECC. Added these products to the catalog, replicated to TREX and checked in the web shop.
What is the procedure for configurable products use in web channel?
Please provide material or useful links if any?
Thanks in advance,
Srinivas
Similar Messages
-
Hello Blackberry Senbai...
As my problem showed as subject line. "When I setup synchronize with address book for Sage ACT! showed Runtime Error: Cannot configure the section."
Setup was stopped from this point.
my system info..
Desktop Manager version is 5.0 downloaded from Blackberry website.
ACT version is 2010.
OS: Window XP Pro with service pack 3
Thank you for your time to review my problem.Hi and Welcome to the Forums!
Since the version of ACT that you state is not contained in the PIM compatibility matrix, I'm not sure that there is anything to be offerred...
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Runtime exception for configurable products
Hi Gurus,
I am getting a runtime exception for configurable products on clicking the link You can select more product options in CRM 7 b2c application . But when i login with a registered user and click the same link , it opens up and takes to the page for configuration of products .
Please find the error from logs :
[EXCEPTION]
79823 java.lang.NullPointerException: It was tried to rebuild the connection because of invalidity. It is not allowed because the connection type is not JCoConnectionStateless. You may also check the user authorizations.
79824 at com.sap.isa.core.eai.sp.jco.BackendBusinessObjectBaseSAP.getDefaultJCoConnection(BackendBusinessObjectBaseSAP.java:55)
79825 at com.sap.isa.maintenanceobject.backend.crm.DynamicUICRM.readData(DynamicUICRM.java:121)
79826 at com.sap.isa.maintenanceobject.businessobject.DynamicUI.read(DynamicUI.java:767)
79827 at com.sap.isa.ipc.ui.jsp.action.InitDynamicUIAction.ecomPerform(InitDynamicUIAction.java:67)
79828 at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:375)
79829 at com.sap.isa.core.BaseAction.execute(BaseAction.java:212)
79830 at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
79831 at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:692)
79832 at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
79833 at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:409)
79834 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
79835 at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
79836 at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
79837 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
79838 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
79839 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
79840 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
79841 at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
79842 at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
Can anybody help me out to find the issue .
Thanks and Regards,
Tony IsaacTony,
It looks more like an issue with the loading of the JCO properties before the logon. Can you go to XCM and try reentering the password and save the config. Once done do a test connection and restart the application.
Then set a breakpoint in the BackendBusinessObjectBaseSAP class in the method getDefaultJCoConnection().
Here when the current connection is invalid it tries to read the config properties from XCM. Just check if it is reading the correct values from the config ISA_COMPLETE which is read on the backend object.
In case of mismatch, you need to fix that or you could try to build a new JCO connection with your own parameters.
Pradeep
Edited by: Pradeep Kumar on Mar 11, 2010 6:20 AM -
Runtime error with Adobe Reader 9.x and IE
I'm getting a runtime error with any adobe reader 9.x and Internet Explorer whenever a .pdf is being viewed online. It will pull the .pdf up and then pop up a runtime error window and close it down completely. It is only happening with individuals that have redirected app data folders and profiles. I have all machines running Windows XP sp3 and IE8. I know, I know, I can always go to Firefox or Chrome, but IE is easily managed with group policy lockdowns. I can unintall reader 9.x and then reinstall 8.x and it works perfectly. The only problem with that is that I have to go do every machine and physically uninstall since I buildt the windows xp installer package with it. Does anyone know a workaround or if adobe is going to get it fixed pretty soon?
I am experiencing exactly the same problems on one of two identical machines after something happened in the registry.
The first problem that appered was an error 1325 "Favorites is not a valid short name".
I did find the registry key involved (%userprofile%\Favorites) and fixed it.
So now the the next one: yours.
I think the solution can be found in the list of registry keys that Adobe Reader is accessing.
btw Eusing registry cleaner did not find this key to be in error.
Problem is that the Reader does not ask for an alternative location after stumbling on the key.
Who can gnerate a list of keys accessed? -
I continue to get r6025 runtime error with iTunes version 10.6.3.25. Have uninstalled and reinstalled twice. Happens when I search in iTunes Store. Ideas to fix?
Hi,
got it fixed! My Son had both files on his Win7 iTunes installation. Never mind he had no issues whith ths iTunes and iPhone Sync. So I checked my other Win XP PC, where I don't have this problem syncing my ipad, and surprise. Both files do NOT show up on this PC. So I renamed the iTunesPhotoProcessor.exe I found under c:\program file\iTunes and synced again my iPhone and it went through without any error. So the problem might be and unremoved iTunesPhotoProcessor.exe or the missing iTunesPhotoProcessor.dll under the iTunes install root folder and this even if I had checked that the folder was completely removed during iTunes unistall.
Please try yourselve and just rename the iTunesPhotoProcessor.exe to iTunesPhotoProcessor.exe_ under c:\program file\iTunes or get a copy of the missing iTunesPhotoProcessor.dll and cp to c:\program file\iTunes. -
when I open Firefox I have to try several times because a Runtime Error with the program C:\Windows\System32\regsvr32.exe
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "Continue in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
Runtime error DBIF_REPO_SQL_ERROR in production server
Hello All,
I am recieving the following running time error in my Production system. Any help would be really appreciated.
Runtime Error DBIF_REPO_SQL_ERROR
Occurred on 06.09.2009 at 19:16:45
*SQL error 3114 occurred when accessing program*
What happened?
The system is no longer linked to an ORACLE instance.
No further operations can be performed on the database.
What can you do?
You cannot eliminate this error yourself.
Please inform your database administrator.
Make a note of the actions and input which caused the error.
To resolve the problem, contact your
SAP system administrator.
With transaction ST22, for dump analysis, you can see and manage
termination messages and, in particular, save them for longer periods of
time.
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
The system attempted to access an ORACLE instance to which it is
no longer linked.
This can occur if the ORACLE instance has been stopped due to an
error or an external operation.
How to correct the error
Database error text........: "ORA-03114: not connected to ORACLE"
Triggering SQL statement...: "CX_SY_OPEN_SQL_DB=============CP "
The current status of the ORACLE instance cannot be determined.
It may still be inactive or the database administrator may have
restarted it.
In any case, all systems that have accessed the ORACLE instance
must be restarted after the ORACLE instance has been restarted.
If you were working on a central system, inform
your system administrator.
If you were working on an external local system, inform
the person responsible for this system.
If you were working on your own local system, restart
the system yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_REPO_SQL_ERROR" C
"SAPLSALA" or "LSALAU01"
"SALA_UPDATE_TRANS_SPEZ_MON"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_REPO_SQL_ERROR" C
"SAPLSALA" or "LSALAU01"
"SALA_UPDATE_TRANS_SPEZ_MON"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_REPO_SQL_ERROR" C
"SAPLSALA" or "LSALAU01"
"SALA_UPDATE_TRANS_SPEZ_MON"
If you cannot solve the problem yourself, please send the
following documents to SAP:
Already we have checked the SAPnotes 534729, 135942 and 112266 advice to configure all network
components on the same fixed speed and full-duplex, instead of using the auto-negotiating.
Please suggest... thanks in advace.
Regards,
Suresh
Edited by: Suresh Kalagarla on Sep 9, 2009 11:27 AMI'd say the dump tells you what you need to do:
> -
> What happened?
> -
>
> The system is no longer linked to an ORACLE instance.
> No further operations can be performed on the database.
>
> -
> What can you do?
> -
>
> You cannot eliminate this error yourself.
> Please inform your database administrator.
> Make a note of the actions and input which caused the error.
> -
>
> To resolve the problem, contact your
> SAP system administrator.
> -
Variant Configuration on B2B & B2C webshop
Hi Experts,
We have requirement of providing Variant configuration on B2B and B2C Webshop , when customer creates sales order.
SAP CRM 7.0 is integrated with backend ECC 6.0 , And "Variant configuration " is configured in ECC 6.0.
Please share step by step details , How to provide "variant configuration" functionality on B2B and B2C Webshop
Any documentation /configuration /settings info will be highly appreciated.
Thanks in advance.
regards,
PDHi,
Any pointer /relevent information related to providing variant configuration feature on B2B & B2C webshop will be appreciated.
thanks and regards,
Prashant -
Hi,
I have a new laptop with Windows 7 and Adobe reader 10 'X' installed. I am unable to open a PDF dopcument. A box shows up titled Microsoft visual C++ Runtime library and within the box is written 'Runtime Error Program :C... This application has requested the Runtime to terminate in an unusual way.Please contact the applications support team for more information'. I have tried to follow instruction on support for adobe but cannot find the information they are suggesting i change such as preferences etc. Can anybody help me as I do not have a good knowledge of computers and nobody to ask....Try the following and check if you could launch reader or not?
1. Right click on Reader icon and choose Properties...
2. Goto Compatibility tab and check 'Run this program in compatibility mode for'
3. Click OK
4. Double click on Reader icon and choose 'Open with protected mode disabled' and click OK. -
When I try loading a PDF document I get the following error:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program Files\Adobe\Reader 10.0\Reader\AcroRD32.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
I have uninstalled, reinstalled, nothing seems to work.
Can anyone give advice on what this could be? I'm using Windows 7 Ultimate.
Thanks in advance!I have the same issue too. Slight difference is I'm running on Windows XP Pro but using Office 2010.
Any email with a PDF attachment can be opened - just comes up with a Runtime error as described by 'Ladyk362003'.
If you save the file somewhere on the systems hard disk and then double click it it opens fine.
This did work before, but not sure what could have changed.
I've uninstalled Reader and then downloaded the latest this morning from their website and still the problem is present.
Anyone got any ideas.
Thanks -
Reg : Daily i got 120 ABAP Runtime Error with in 40 Mins(Early Morning)
Dear Friends,
I got following errors regularly. when i run t.code RSBTCDEL and RSSNAPDL. what can i do? then Regularly morning i got same morethan 120 Error. User is SAPSYS 000 Client. How can avoid this type of ABAP Runtime Error.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 10.06.2009 15:04:23
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "[601] Could not continue scan with NOLOCK due to
data movement."
Internal call code.........: "[RSQL/FTCH/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLBTCH" or "LBTCHF19"
"EXECUTE_BP_JOB_SELECT"
If you cannot solve the problem yourself and want to send an error notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System u2192 List u2192 Save u2192 Local File u2192 (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21. Restrict the time interval to 10 minutes before and five minutes after the short dump. Then choose "System->List->Save->Local File-(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP program: The source code of the program In the editor, choose "Utilities->More Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which actions and input led to the error. The exception must either be prevented, caught within proedure
"EXECUTE_BP_JOB_SELECT" "(FORM)", or its possible occurrence must be declared
in the RAISING clause of the procedure. To prevent the exception, note the following:
Client.............. 400
User................ "BASIS"
Language key........ "E"
Transaction......... "SE38 "
Transactions ID..... "D7A155DEA42EF1EEB52A000423BF7C3A"
Program............. "SAPLBTCH" ( Run a Sap Standard Report RSBTCDEL)
Screen.............. "SAPMSSY0 1000"
Regards
keshavHi Juan,
My System is
ECC 6.0
Database : MS SQL Server 2005
OS - Windows 2003 server
SAP Patches level is Basis - SAPKB70016
ABAP - SAPKA70016
Kernel patch level - 185
when i has update the kernel patches after only i got this error morethan 120 like early morning 4.40 AM to 5.18 AM regularly. what can i do?
Regards
keshav -
Problem with user logon in b2c webshop
hello,
i have registered as a consumer in BC webshop CRM,soon after creation i could able to logon into the shop,but when i logoff and again logon with the created logon info it says logon is invalid.
Iam using the same same address data which is related to the sales area used in the during webshop creation,even then the problem is persisiting,
one more question,can we create any user in CRm system and use that logon info
to login to b2c webshop,i mean the other wau round will it work,
if yes please answer me how.
thanks
chanduHi Chandrashekar,
Please in the backend whether you are credentials are attached to a consumer group.
Also check from your system administrator, whether your user id is in active state and has the required roles.
I don't there could be any problem except. Please revert back.
regards,
Prashil -
I've been trying to call a stored procedure through Entity Framework and WCF Data Services (OData). It returns an entity not a complex type. Following walkthroughs found all over the web, I came up with this code inside my service:
[WebGet]
public IQueryable<Entity> GetEntitiesByParameterId(int parameterId)
return CurrentDataSource.GetEntitiesByParameterId(parameterId).AsQueryable();
Calling the proc this way: ~WcfService.svc/GetEntitiesByParameterId?parameterId=1 executes
the stored procedure and returns entities that should be returned. No problem there.
Everything works well until I try to use $select OData option ie. ~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$select=name.
Upon debugging, the method above runs without any error but it returns an Operation could destabilize the runtime error upon reaching the
client. After so much research, apparently it is a very general error pointing to a lot of different causes. I haven't found one that really matches my particular problem. Closest are
http://stackoverflow.com/questions/378895/operation-could-destabilize-the-runtime
https://social.msdn.microsoft.com/Forums/en-US/d2fb4767-dc09-4879-a62a-5b2ce96c4465/for-some-columns-entity-properties-executestorequery-failed-with-error-operation-could?forum=adodotnetdataservices
but none of the solutions worked on my end.
Also, from the second article above:
This is a known limitation of WCF DS. ...
Second is that some of the queries won't work correctly because LINQ to EF needs little different LINQ expressions than LINQ to Objects in some cases. Which is the problem you're seeing.
It has been posted on 2012. If it its true, are there still no updates on this? And is there any other workaround to get the $select working on the stored proc call?
What works:
~WcfService.svc/GetEntitiesByParameterId?parameterId=1
~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$top=1
~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$skip-5
~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$filter={filter query}
~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$expand=SomeNavigationProperty
What doesn't work:
~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$select=name
Tech details:
EntityFramework 5, WCF Data Service 5.0, OData V3
*I've also tried upgrading to EF6 and WCF 5.6.2 and it still didn't work.
Any help would be appreciated. Thanks!Someone from SO replied to my question there and said that $select is still not supported though I couldn't find any definitive documentation about it.
From what I gather and observed, $select breaks the stored procedure call because it tries to alter the data shape already gotten from the database and attempts to return a dynamic entity instead. Something about the stored proc returning an ObjectResult might
be messing it up. As I have said, these are merely my observations.
Workaround: I found a simple and elegant workaround for it though. Since my stored procedures are only getting data from the database and does
not alter data in any way (INSERT, UPDATE, DELETE), I tried using table-valued functions that returns a table equivalent to the entity on my EF. I've found that calling this function on the Service Operation method returns an IQueryable<Entity> which
is basically what is needed. $select also works now and so does other OData query options.
Steps:
Create a function on the database
Update EDMX -> Add function
Add new Function Import with Entity return type
Create service operation in WCF Data Service that calls CurrentDataSource.<FunctionName>()
Test in fiddler.
CODES
Database Function:
CREATE FUNCTION GetEntities(@parameter)
RETURN @entites TABLE(
[Id] [int],
[Name] [nvarchar](100),
AS
BEGIN
INSERT INTO @entities
SELECT [Id], [Name], ... FROM [EntityTable]
RETURN
END
WCF:
[WebGet]
public IQueryable<Entity> GetEntity(int parameter)
return CurrentDataSource.GetEntity(parameter);
It doesn't really solve the stored procedure problem but I'm marking this as answer until someone can provide a better one as it does solve what I'm trying to do.
Hope this helps others too. :) -
Hi,
we are facing this dump , past one month, any one can please suggest us..
please find error details..
we checked communication between solman and CRP is seems tobe fine..
Runtime Errors CALL_FUNCTION_NOT_FOUND
Date and Time 15.09.2010 09:30:44
Short text
Function module "SXMS_GET_METERING_RECORDS" not found.
User and Transaction
Client.............. 000
User................ "SAPSYS" Language Key........ "V"
Transaction......... " "
Transactions ID..... "4C8F117F84FC007BE10080000A281E0E"
Client.............. 700
User................ "SMD_RFC"
Transaction......... " "
Call Program........."SAPLE2E_FUNC"
Function Module..... "SXMS_GET_METERING_RECORDS"
Call Destination.... "SM_CRPCLNT700_READ" Source Server....... "untmvgc170_SMP_01"
What happened?
The function module "SXMS_GET_METERING_RECORDS" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPMSSY1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The program "SAPMSSY1" contains the CALL FUNCTION statement.
The name of the function module to be called is "SXMS_GET_METERING_RECORDS".
No function module exists with the name "SXMS_GET_METERING_RECORDS".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attention to
upper/lower case and underscores ("_").
or
b) Transport error
c) In the case of an enqueue/dequeue module,
the lock object may not have been activated
(ABAP/4 Dictionary).
we found related to this note 1340170Hi,
The function module SXMS_GET_METERING_RECORDS is only available as of
a certain BASIS SP level of the managed system. As note 1340170 describes
the problem in detail. It also explains the option of deactivating the
E2E_SERVICE_METERING_EXTRACTOR to avoid the short dumps, if updating
the BASIS SP level is not an option for you?
Regards,
Aidan -
Planning in APO with configurable products
Dear Gurus
we would like to use APO DP in order to plan the demand of configurable products managing the demand figures only for a combination of the two main products characteristics (model/version) without having in DP all the complexity of the order configuration.
Moreover we would like to allocate this forecast to the plants and make a rough capacity planning. The levelled forecast (MPS) should then be used to explode the dependent demand of the critical components at SKU level.
In order to manage this process I was thinking to introduce u201Cdummy codesu201D that represent the charatteristics combination and u201Cdummy BOMu201D for the explosionu2026. This in order to be albe to use SNP to perform the capacity planning and BOM explosion.
Other scenario could be to make the capacity planning and BOM explosion only in DP (with planning BOM) but Iu2019m not sure of the feasibilityu2026
Could you advise on which could be a possible approach and if you had such similar issue to face? Thanks in advance
Regards
Ayan BishnuHi,
Here you may think of using planning product concept. Inshort you may plan on the basis of one of your critical subassembly
and this subassembly wud be consumed for most of the order demands.
Please check if it is suitable for you and revert
Thanks,
Mangesh A. Kulkarni
Maybe you are looking for
-
How to apply 3 way color correction to multiple clips in Final Cut Pro?
I have multiple clips from the same time and space footage that need color correction. I have worked on one of the clips and found the settings I like. Is there a way to apply that correction to other clips without starting from scratch on each one?
-
Cannot save file as pdf from adobe form central
I cannot longer save file as pdf or excel once it downloads from adobe form central, can someone please help me as I have a whole hosts of applications waiting to be downloaded
-
Can I send a gmail with attachment, possibly photo?
I wanted to send a gmail with aatachment being photo saved to gallery.
-
IPhone Mail Not Showing Images.
In my mail account within the message I'm not seeing any images. All that shows up is the blue question mark. I'm using .mac or .me whatever it's called. it's rather frustrating. Any ideas?
-
Rest based webservices from plsql procedures/packages
Guyz. Please let me know How to create Rest based webservices in jdeveloper tool from plsql procedures/packages. Im very much in need Thanks,