Runtime Errors :: CALL_FUNCTION_NOT_FOUND

Hi all,
while executing program on development it is working fine but on qaulity 'SSF_FUNCTION_MODULE_NAME'
fm unable to generate FM_NAME and it goes to dump.
It shows exeption 'CX_SY_DYN_CALL_ILLEGAL_FUNC'.
Please help me out if any one have solution.
Regards
Gaurav

Hi ,
First check whether the form has been moved to quality system if yes then generate the smart form function as specified by vinod or else check you are passing right form to SSF_FUnction_module_name in driver program
Thanks
Kamath

Similar Messages

While executing 'Z' BAPI Runtime error CALL_FUNCTION_NOT_FOUND has occurred

Dear Friends,
We Customized 'Z' BAPI but not transported to QA yet,
Is it possible to test with QA by fetch QA data by giving RFC target sys: (QA RFC Destination Name)
If I give RFC target sys: (QA RFC Destination), I am getting Runtime error CALL_FUNCTION_NOT_FOUND has occurred.
How to resole this....
What is method to check this customized BAPI with different server...../
It is working fine for Standard BAPI.
Regards

But you should be able to call it in the DEV system from QA. This will prove that the RFC part works.
Rob

Runtime error CALL_FUNCTION_NOT_FOUND

We get this message from our QUA System with tne next
error:
The function module "Y_210_VERIFY_LOGON" was called,
but cannot be found in the Function Library.
The current ABAP program "SAPMSSY1" has to be terminated.
Recently we made a system copy from PRD to QUA and
immediately we get them.
Some one has the same error ?
Thanks in advance.

Hi Thierry Lieu, thanks for your time.
I check the function in PRD system but does not exist (both clients 400 and 000) , the error shows that is in client 000
User, transaction...
Client.............. 000
User................ "SAPSYS"
Language key........ "S"
Transaction......... " "
Program............. "SAPMSSY1"
Screen.............. "SAPMSSY1 3004"
Row of screen....... 2
Information about program making the Remote Function Call (RFC):
System.............. " "
Database Release.... 640
Kernel Release...... 640
Connection type: "E" (2 = R/2, 3 = R/3, E = External, R = Reg.external)
Call type: "S-" (S = Synchronous, a/A = Asynchronous, T = Transaction)
Client.............. " "
User................ " "
Transaction......... " (Program: ksaagent_QUA)"
Function module..... "Y_210_VERIFY_LOGON"
Call destination.... "QUA"
Source server....... "QUAZEUSUNE"
Source IP address... "172.30.60.132"
Additional RFC logon information:
Trusted Relation....." "
Logon return code...." "
Trusted return code.." "
Note: Prior to Release 4.0, there was less information available on RFC
calling programs.
Source code of SAPMSSY1
000390   module %_rfcdia_call output.
000400       "Do not display screen !
000410       call 'DY_INVISIBLE_SCREEN'.
000420       perform remote_function_diacall.
000430   endmodule.
000440
000450   module %_cpic_start.
000460     if sy-xprog(4) = '%RFC'.
000470       perform remote_function_call using rfctype_external_cpic.
000480     else.
000490       call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
000500       perform cpic_call using convid.
000510     endif.
000520   endmodule.
000530
000540
000550   form cpic_call using convid type c.
000560     communication send id convid buffer header.
000570     if sy-subrc eq 0.
000580       perform (sy-xform) in program (sy-xprog).
000590     else.
000600       message a800.
000610     endif.
000620   endform.
000630
000640   form remote_function_call using value(type).
000650     do.
000660   *   test if sy-xprog and sy-xform are set
000670   *   sy-xform = 'quatsch'. sy-xprog = 'quatsch'.
ERROR>       call 'RfcImport' id 'Type' field type.
000690       perform (sy-xform) in program (sy-xprog).
000700       rsyn >scont sysc 00011111 0.
000710     enddo.
000720   endform.
000730
000740   form remote_function_diastart.
000750     do.
000760       call 'RfcImport' id 'Type' field rfctype_rfcdia.
000770       perform (sy-xform) in program (sy-xprog).
000780       "Parking position for next request
000790       rsyn >scont sysc 00011111 10.
000800       "ALternativ : Free mode
000810       "COMMIT WORK.
000820       "SYSTEM-CALL FREE MODE 0.
000830     enddo.
000840   endform.
000850
000860   form remote_function_diacall.
000870       sy-xcode = '%_@no@'.
I do not think of a possible change on local because we delete the QUA Database before and then we make the restore of PRD like QUA and immediately we get the error.
If you need some thing else, please let me know.
Thanks in Advance
Reynaldo.

CALL_FUNCTION_NOT_FOUND runtime error with SXMS_GET_METERING_RECORDS

Hi,
we are facing this dump , past one month, any one can please suggest us..
please find error details..
we checked communication between solman and CRP is seems tobe fine..
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Date and Time          15.09.2010 09:30:44
Short text
     Function module "SXMS_GET_METERING_RECORDS" not found.
User and Transaction
    Client.............. 000
    User................ "SAPSYS"    Language Key........ "V"
    Transaction......... " "
    Transactions ID..... "4C8F117F84FC007BE10080000A281E0E"
    Client.............. 700
    User................ "SMD_RFC"
    Transaction......... " "
    Call Program........."SAPLE2E_FUNC"
    Function Module..... "SXMS_GET_METERING_RECORDS"
    Call Destination.... "SM_CRPCLNT700_READ"    Source Server....... "untmvgc170_SMP_01"
What happened?
    The function module "SXMS_GET_METERING_RECORDS" is called,
    but cannot be found in the library.
    Error in the ABAP Application Program
    The current ABAP program "SAPMSSY1" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The program "SAPMSSY1" contains the CALL FUNCTION statement.
    The name of the function module to be called is "SXMS_GET_METERING_RECORDS".
    No function module exists with the name "SXMS_GET_METERING_RECORDS".
    All function modules are listed in the Function Library (SE37).
    Possible reasons:
    a) Wrong name specified. Pay particular attention to
       upper/lower case and underscores ("_").
       or
    b) Transport error
    c) In the case of an enqueue/dequeue module,
       the lock object may not have been activated
       (ABAP/4 Dictionary).
we found related to this note 1340170

Hi,
The function module SXMS_GET_METERING_RECORDS is only available as of
a certain BASIS SP level of the managed system. As note 1340170 describes
the problem in detail. It also explains the option of deactivating the
E2E_SERVICE_METERING_EXTRACTOR to avoid the short dumps, if updating
the BASIS SP level is not an option for you?
Regards,
Aidan

ABAP Runtime Error at the time of saving of Document Through CV01N tcode

Dear Experts
We have install seprate DMS Server for storing various documents of different module.
While saving of Document through Transaction CV01N one small screen gets pop up.Which is as follows
Check in Document:KPro
Storage Category   Description
ZCITY123               DMS
I am selecting above line from Kpro, then when i click on save system gives ABAP Runtime Error.
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          21.10.2008 18:35:26
Short text
     Function module "PROJECT SYSTEM" not found.
What happened?
     The function module "PROJECT SYSTEM" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLSDCE" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
I am not understanding why this dump is coming.
How i can come up from this issue.Pls guide me.If any customizing is required pls give the steps
Thanks in Advance.
Regards,
Sandeep Theurkar

There is a programming error somewhere.To get a solution quickly, do as follows:
1. Turn off all badi's, user exits and whatever you have changed in standard SAP.
2. Rerun - if it still fails - search in SAP notes for relevant notes
3. If it doesnt fail - you have an error in your own programming
4. If you are on relevant Support packages etc, send a message to SAP.
Regards,
Espen Leknes

RSDU_EXEC_SQL Runtime Error

Hi Experts
Via SE38 with program RSDU_EXEC_SQL I have been trying execute a simple SQL statement but keep getting a runtime error. The procedure I went through is:
Clicked the button 'SQL Command'
Entered a SQL statement in the new screen, e.g. "Select * From T000"
Hit the save button
Executed the query
...but then I get the following message
Runtime Errors:          CALL_FUNCTION_NOT_FOUND
Except:               CX_SY_DYN_CALL_ILLEGAL_FUNC
Short text:               Function module "RSDU_LIST_DB_TABLE_MSS" not found.
Your help would be much appreciated.

Hi,
Please refer to below link:
http://www.sdn.sap.com/irj/scn/advancedsearch?query=call_function_not_found+&cat=sdn_all
Regards,
Venkat.

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

RunTime Error while saving a Sales Order

Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
          select * from (t681-kotab) appending table <cond_tab>
                 up to 1 rows
                 where kappl = se_kappl
                 and   kschl = se_kschl
                 and   datbi >= se_date
                 and   datab <= se_date
                 and   (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
Pavan

Hi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR

hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situat
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the cur
    screen.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT
SourceCde
              message e001(zm) WITH text-335 ltab-kunnr text-334.
            else.
              if ktab-jkunnr <> ltab-kunnr.
                ktab-jkunnr = ltab-kunnr.
                jobsitecode = ltab-kunnr.
                CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                EXPORTING
                  input = jobsitecode
                  IMPORTING
                  output = jobsitecode.
                SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
                IF sy-subrc = 0.
                  ktab-jname1 = kna1-name1.
                  ktab-jstras = kna1-stras.
                ENDIF.
                chg_flg = 'X'.
              endif.
            endif.
          else.
            message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
*          if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
*            message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
*          endif.
          custcode1 = ktab-ckunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = custcode1
            IMPORTING
              output = custcode1.
          jobsitecode1 = ktab-jkunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = jobsitecode1
            IMPORTING
              output = jobsitecode1.
          SELECT SINGLE * FROM knvp
          WHERE kunnr = custcode1
            AND vkorg = vbak-vkorg
            AND vtweg = vbak-vtweg
            AND spart = vbak-spart
            AND parvw = 'WE'
Error analysis
    The program attempted to issue a " " message during "Exit Command"
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT

Hi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"

Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situation
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the current
    screen.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator.
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
How to correct the error
    The program must be modified to correct the error.
    The modification must be made in "Exit Command" processing.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
Source Code Extract
Line SourceCde
    1 *---------------------------------------------------------------------*
    2 *       FORM YVBEP_LESEN                                              *
    3 *---------------------------------------------------------------------*
    4 *       Lesen der Tabelle YVBEP (nicht sortiert)                      *
    5 *---------------------------------------------------------------------*
    6 FORM YVBEP_LESEN USING US_POSNR
    7                        US_ETENR
    8               CHANGING CH_TABIX.
    9
   10   YVBEP = SPACE.
   11   YVBEP-MANDT = VBAK-MANDT.
   12   YVBEP-VBELN = VBAK-VBELN.
   13   YVBEP-POSNR = US_POSNR.
   14   YVBEP-ETENR = US_ETENR.
   15   READ TABLE YVBEP.
   16   IF SY-SUBRC > 0.
   17     MESSAGE E506 WITH US_POSNR US_ETENR.
   18   ENDIF.
>>>>>   CH_TABIX = SY-TABIX.
   20
   21 ENDFORM.
Could you please help on this issue.
Thanks
Srinu

Hi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus

Portal runtime error while selecting page layout in WPC editor

Hello,
in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup.
The logfile shows the following :
#1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#1016#149##n/a##7ff9c93eab6811dfa9c70000003307de#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###10:06_19/08/10_0010_3344350
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: E:
usr
sap
EPD
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.netweaver.bc.util
lib
bc.util.public_api.jar(com/sapportals/wcm/WcmException.java):24: class WcmException is public, should be declared in a file named WcmException.java
(source unavailable)
1 error
I have the same by clicking on "check assignments"
Any help ?
Thanks

Hello Jego.
We faced the same issue after upgrade to EHP1 SP07 last week and managed to solve it by modification of layout.jsp and com.sap.nw.wpc.layoutmanager.LayoutBean within com.sap.nw.wpc.designtime.par. SAP's code requires an additional catch handler, so it is better to rise an OSS message.
As a workaround you may change a default layout for wpc main page (good for new pages) or manually edit output.xml for existing pages.
Best regards,
Aliaksandr Zhukau

Runtime Error when installing Adobe Creative Suite 5.5 Production Premium

I am trying to install Adobe Creative Suite 5.5 Production Premium, but I keep getting a 'Runtime Error!': This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
What should I do? Any help greatly appreciated! I am running Win 7, Service Pack 1, 64 bit.

We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
Mylenium

Runtime error in enhancement spot-' mereq_topline does not exists.'

Hi all,
I have implemented an implicit enhancement spot in ME53n.
When i applied break point in enhancement spot and control goes to ebhancement spot in debugging mode, i got purchse requisition number in mereq_topline.
When i tried to use this structure value in code i get runtime error-
' mereq_topline does not exists.'
Can you please guide how to resolve this runtime error.
thanks.
Edited by: Sanjay_lnt on Sep 20, 2010 8:52 AM

Sanjay,
try to delete the enhancement and recreate it
Thanks
Bala Duvvuri

Runtime Errors :: CALL_FUNCTION_NOT_FOUND

Similar Messages

Maybe you are looking for