Runtime Errors: COMPUTE_INT_MINUS_OVERFLOW
Dear experts:
When I execute a program which was developed by ours ABAPer, the runtime error will happen.
The detail error information as follows (error happens in program "LSTXBCTB3" at 010730):
Runtime Errors COMPUTE_INT_MINUS_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
010640 endloop.
010650 if sy-subrc = 0.
010660 append l_otfline to l_lastinfo.
010670 endif.
010680 * get corrected value for l_blockpos: should be the position
010690 * set by the command of 'positioning' (last in the block).
010700
010710 * look for 'last' ST command
010720 l_index = l_blockend.
010730 while l_flag eq c_true.
> l_index = l_index - 1.
010750 read table p_cell_otf into l_otfline index l_index.
010760 if l_otfline-tdprintcom <> pc_id_codepage and
010770 l_otfline-tdprintcom <> pc_id_call_font and
010780 l_otfline-tdprintcom <> pc_id_space_width and
010790 l_otfline-tdprintcom <> pc_id_uline and
010800 l_otfline-tdprintcom <> pc_id_color_text and
010810 l_otfline-tdprintcom <> pc_id_move_to and
010820 l_otfline-tdprintcom <> pc_id_md_after_par.
010830
010840 l_flag = c_false.
010850 endif.
010860 endwhile.
Anyone who can help me to solve the problem? Thanks a million!
Edited by: Guo Qing Wu on Dec 17, 2007 8:49 AM
Edited by: Guo Qing Wu on Dec 17, 2007 8:54 AM
Edited by: Guo Qing Wu on Dec 17, 2007 8:55 AM
Edited by: Guo Qing Wu on Dec 17, 2007 8:57 AM
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ARITHMETIC_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"TAB_SPLIT_CELL" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
In the current program "SAPLSTXBC ", subtracting the number 1 from
the number "-2147483648" (using the operation - or 'SUBTRACT') resulted
in a value either greater than 2147483647 or smaller than
-2147483648. This results in a whole number overflow.
How to correct the error
The exception must either be prevented, caught within the procedure
"TAB_SPLIT_CELL"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
You may be able to split the process into separate components, so that
the values generated are smaller.
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "yihai-appl1"
Network address.......... "10.10.10.161"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 4
Short dump setting....... "full"
Database server.......... "DB-YIHAI"
Database type............ "MSSQL"
Database name............ "PRD"
Database owner........... "prd"
Character set............ "Chinese_CHN.936"
SAP kernel............... "620"
Created on............... "Dec 19 2004 22:59:44"
Created in............... "NT 5.0 2195 Service Pack 2 x86 MS VC++ 12.00"
Database version......... "SQL_Server_7.00 "
Patch level.............. "1773"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "620"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
User, transaction...
Client.............. 888
User................ "ZHANGLUWEI"
Language key........ 1
Transaction......... "ZSD136 "
Program............. "SAPLSTXBC "
Screen.............. "ZDIA_SD_KERRY_DO 0601"
Screen line......... 25
Information on where termination occurred
The termination occurred in the ABAP program "SAPLSTXBC " in "TAB_SPLIT_CELL".
The main program was "ZDIA_SD_KERRY_DO ".
The termination occurred in line 1074 of the source code of the (Include)
program "LSTXBCTB3 "
of the source code of program "LSTXBCTB3 " (when calling the editor 10740).
Processing was terminated because the exception "CX_SY_ARITHMETIC_OVERFLOW"
occurred in the
procedure "TAB_SPLIT_CELL" "(FORM)" but was not handled locally, not declared
in the
RAISING clause of the procedure.
The procedure is in the program "SAPLSTXBC ". Its source code starts in line
897
of the (Include) program "LSTXBCTB3 ".
Source code extract
010440 append l_otfline to l_lastinfo.
010450 exit.
010460 endif.
010470 if l_otfline-tdprintcom = pc_id_call_font.
010480 exit.
010490 endif.
010500 endloop.
010510 endif.
010520 * find last UL command
010530 loop at p_cell_otf into l_otfline
010540 to l_blockend
010550 where tdprintcom = pc_id_uline.
010560 endloop.
010570 if sy-subrc = 0.
010580 append l_otfline to l_lastinfo.
010590 endif.
010600 * find last CT command
010610 loop at p_cell_otf into l_otfline
010620 to l_blockend
010630 where tdprintcom = pc_id_color_text.
010640 endloop.
010650 if sy-subrc = 0.
010660 append l_otfline to l_lastinfo.
010670 endif.
010680 * get corrected value for l_blockpos: should be the position
010690 * set by the command of 'positioning' (last in the block).
010700
010710 * look for 'last' ST command
010720 l_index = l_blockend.
010730 while l_flag eq c_true.
> l_index = l_index - 1.
010750 read table p_cell_otf into l_otfline index l_index.
010760 if l_otfline-tdprintcom <> pc_id_codepage and
010770 l_otfline-tdprintcom <> pc_id_call_font and
010780 l_otfline-tdprintcom <> pc_id_space_width and
010790 l_otfline-tdprintcom <> pc_id_uline and
010800 l_otfline-tdprintcom <> pc_id_color_text and
010810 l_otfline-tdprintcom <> pc_id_move_to and
010820 l_otfline-tdprintcom <> pc_id_md_after_par.
010830
010840 l_flag = c_false.
010850 endif.
010860 endwhile.
010870
010880 if l_otfline-tdprintcom = pc_id_string.
010890 * find last MT or MB command
010900 loop at p_cell_otf into l_otfline
010910 to l_index
010920 where tdprintcom = pc_id_move_to or
010930 tdprintcom = pc_id_md_after_par.
Contents of system fields
SY field contents..................... SY field contents.................
SY-SUBRC 4 SY-INDEX -2147483641
SY-TABIX 0 SY-DBCNT 0
SY-FDPOS 3 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY MAIN2000
SY-UCOMM PREV SY-TITLE KerryÒÔ¶Ô·½Îª×¼·½°¸ÊµÏÖ
SY-MSGTY SY-MSGID
SY-MSGNO 000 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
Program
Include Line
Class
17 FORM TAB_SPLIT_CELL
SAPLSTXBC
LSTXBCTB3 1074
16 FORM TAB_SPLIT_LINE_OTF
SAPLSTXBC
LSTXBCTB3 681
15 FORM TAB_END_ROW
SAPLSTXBC
LSTXBCTB2 510
14 FORM TAB_ROW_END
SAPLSTXBC
LSTXBCTB2 109
13 FUNCTION SSFCOMP_TABLE_ROW_END
SAPLSTXBC
LSTXBCU44 9
12 FORM %EV2
/1BCDWB/SAPLSF00000039
/1BCDWB/LSF00000039F01 1133
11 FORM %WI3_BODY
/1BCDWB/SAPLSF00000039
/1BCDWB/LSF00000039F01 688
10 FORM %WI3
/1BCDWB/SAPLSF00000039
/1BCDWB/LSF00000039F01 645
9 FORM CALLBACK
SAPLSTXBC
LSTXBCFDC 258
8 FORM PROCESS_PAGES
SAPLSTXBC
LSTXBCFDC 220
7 FUNCTION SSFCOMP_PROCESS_DOCUMENT
SAPLSTXBC
LSTXBCU03 106
6 FUNCTION /1BCDWB/SF00000039
/1BCDWB/SAPLSF00000039
/1BCDWB/LSF00000039U01 375
5 FORM SMART_PRINT
ZDIA_SD_KERRY_DO
ZINC_SD_KERRY_DO_0601 168
4 MODULE (PAI) TC_0601_USER_COMMAND
ZDIA_SD_KERRY_DO
ZINC_SD_KERRY_DO_0601 87
3 FORM LOAD_DO_NO61
ZDIA_SD_KERRY_DO
ZINC_SD_KERRY_DO_0601 51
2 MODULE (PAI) PAI_2000
ZDIA_SD_KERRY_DO
ZINC_SD_KERRY_DO_MAIN 533
1 EVENT END-OF-SELECTION
ZDIA_SD_KERRY_DO
ZINC_SD_KERRY_DO_MAIN 34
sen variables
17 FORM TAB_SPLIT_CELL
Is it enough? Thanks a lot for your great help.
Similar Messages
-
Runtime error in starting Lightroom
I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff CulpAha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am -
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas. -
Could someone help me with a Runtime Error while saving a PDF file?
While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
PamIt is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
I open the pdf file
A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
I select ok
then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam -
RunTime Error while saving a Sales Order
Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
PavanHi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR
hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situat
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the cur
screen.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AFZZ
Row 370
Module type (FORM)
Module Name USEREXIT_SAVE_DOCUMENT
SourceCde
message e001(zm) WITH text-335 ltab-kunnr text-334.
else.
if ktab-jkunnr <> ltab-kunnr.
ktab-jkunnr = ltab-kunnr.
jobsitecode = ltab-kunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = jobsitecode
IMPORTING
output = jobsitecode.
SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
IF sy-subrc = 0.
ktab-jname1 = kna1-name1.
ktab-jstras = kna1-stras.
ENDIF.
chg_flg = 'X'.
endif.
endif.
else.
message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
* if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
* message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
* endif.
custcode1 = ktab-ckunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = custcode1
IMPORTING
output = custcode1.
jobsitecode1 = ktab-jkunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = jobsitecode1
IMPORTING
output = jobsitecode1.
SELECT SINGLE * FROM knvp
WHERE kunnr = custcode1
AND vkorg = vbak-vkorg
AND vtweg = vbak-vtweg
AND spart = vbak-spart
AND parvw = 'WE'
Error analysis
The program attempted to issue a " " message during "Exit Command"
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AFZZ
Row 370
Module type (FORM)
Module Name USEREXIT_SAVE_DOCUMENTHi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"
Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situation
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the current
screen.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
How to correct the error
The program must be modified to correct the error.
The modification must be made in "Exit Command" processing.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
Source Code Extract
Line SourceCde
1 *---------------------------------------------------------------------*
2 * FORM YVBEP_LESEN *
3 *---------------------------------------------------------------------*
4 * Lesen der Tabelle YVBEP (nicht sortiert) *
5 *---------------------------------------------------------------------*
6 FORM YVBEP_LESEN USING US_POSNR
7 US_ETENR
8 CHANGING CH_TABIX.
9
10 YVBEP = SPACE.
11 YVBEP-MANDT = VBAK-MANDT.
12 YVBEP-VBELN = VBAK-VBELN.
13 YVBEP-POSNR = US_POSNR.
14 YVBEP-ETENR = US_ETENR.
15 READ TABLE YVBEP.
16 IF SY-SUBRC > 0.
17 MESSAGE E506 WITH US_POSNR US_ETENR.
18 ENDIF.
>>>>> CH_TABIX = SY-TABIX.
20
21 ENDFORM.
Could you please help on this issue.
Thanks
SrinuHi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus -
Portal runtime error while selecting page layout in WPC editor
Hello,
in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup.
The logfile shows the following :
#1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#1016#149##n/a##7ff9c93eab6811dfa9c70000003307de#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###10:06_19/08/10_0010_3344350
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: E:
usr
sap
EPD
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.netweaver.bc.util
lib
bc.util.public_api.jar(com/sapportals/wcm/WcmException.java):24: class WcmException is public, should be declared in a file named WcmException.java
(source unavailable)
1 error
I have the same by clicking on "check assignments"
Any help ?
ThanksHello Jego.
We faced the same issue after upgrade to EHP1 SP07 last week and managed to solve it by modification of layout.jsp and com.sap.nw.wpc.layoutmanager.LayoutBean within com.sap.nw.wpc.designtime.par. SAP's code requires an additional catch handler, so it is better to rise an OSS message.
As a workaround you may change a default layout for wpc main page (good for new pages) or manually edit output.xml for existing pages.
Best regards,
Aliaksandr Zhukau -
Runtime Error when installing Adobe Creative Suite 5.5 Production Premium
I am trying to install Adobe Creative Suite 5.5 Production Premium, but I keep getting a 'Runtime Error!': This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
What should I do? Any help greatly appreciated! I am running Win 7, Service Pack 1, 64 bit.We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
Mylenium -
Runtime error in enhancement spot-' mereq_topline does not exists.'
Hi all,
I have implemented an implicit enhancement spot in ME53n.
When i applied break point in enhancement spot and control goes to ebhancement spot in debugging mode, i got purchse requisition number in mereq_topline.
When i tried to use this structure value in code i get runtime error-
' mereq_topline does not exists.'
Can you please guide how to resolve this runtime error.
thanks.
Edited by: Sanjay_lnt on Sep 20, 2010 8:52 AMSanjay,
try to delete the enhancement and recreate it
Thanks
Bala Duvvuri -
Runtime Error in ALV Tree Output
Dear All, I am trying to create a ALV Tree using Class cl_gui_alv_tree. The Report Shows the Output with the first Node but when i try to expand it is dumping with a runtime error GETWA_NOT_ASSIGNED in class CL_ALV_TREE_BASE and method SET_ITEMS_FOR_COLUMN. The Reason being the data which was copied in the initial node display to mt_outtab is getting refreshed.
Can any one of you help me the reason for the table getting refreshed. Do i need to pass any data.
I am doing the following steps.
1. Create Container,
2. Create Tree Class object
3. Generate the Field Catalog.
4. Set table for first display " With empty internal table
5. Generate the Hierarchy
6. Call the Method Frontend Update.
Let me know if i had missed any steps in the process.
Thank you,
Regards,
Swaroop PatriOne reason for getting this error is using local defined tables for it_outtab parameter in the below code:
To get rid of the dump, define two distinct output tables globally: one is an empty table which you will pass to the below method, other one is your real output table whose size increases dependently.
CALL METHOD go_tree->set_table_for_first_display
EXPORTING
is_hierarchy_header = ls_hier_header
CHANGING
it_outtab = gt_data_e "Empty table
it_fieldcatalog = gt_fcat_tree. -
Runtime error in LSMW to create Material Master
Hi all,
I am trying to create Material No. using direct input method in lsmw. The program name is RMDATIND. But while executing the last step i.e Start Direct input program I am getting a runtime error
"A RAISE statement in the program "SAPLMG25" raised the exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated."
I have checked all the steps of lsmw. Any idea why this specific error is coming?Are you able to create the material manually with the data. If you have checked the basic data view then i would check to see if base unit of measure is mandatory and if its being passed/mapped properly for the material you are creating.
-
Runtime error in component :IUICMDC while testing
Hello Experts,
While testing the BSP Component :IUICMDC, we have facing errors mention below-
Cannot display view CRM_UI_FRAME/WorkAreaViewSet of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View TIUICMDC.MainWindow in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRM_UI_FRAME/WorkAreaViewSet of UI Component CRM_UI_FRAME failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BSPWD_BASICS/WorkAreaHostViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view CRM_UI_FRAME/MainWindow of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BSPWD_BASICS/WorkAreaHostViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRM_UI_FRAME/MainWindow of UI Component CRM_UI_FRAME failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/WorkAreaViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view Root.htm of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/WorkAreaViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
An error occurred during initialization of the application
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/MainWindow in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
please advice
regds
debHello Hongyan,
Thnx for the reply.
When i tried to open the component in dev system, runtime error is coming but while this component is tried in sandbox this error is not there, can you help to find that diffrence.
One more observation that, RT repository is not loaded in dev while is it sucessfully loaded in sandbox.
NB: one more request , here we are trying to add po_box into this component but AET not supported.
Please advice.
regards
deb -
Runtime Error in execution of 'SO_OBJECT_SEND' function module
Hi friends,
We are going for upgradation from 4.6c to ECC6.0. There is one program which is used to send external mails thru 'SO_OBJECT_SEND', but the function module is giving runtime error(line no:515) in ECC6.
what could be the reason?
rewarded,
SteveHi,
Plz check if any latest release notes of SAP for the function module 'SO_OBJECT_SEND' are available. If so you may apply those.
If you have valid SAP service username and password you can get the notes from service.sap.com. Else your BASIS people can help you.
Which is the highest patch level you have applied?
Regards,
Renjith Michael. -
Runtime error in Receiver determination
Hi All,
While testing my configuration in ID, it shows an Runtime error message "Message is incomplete. No Sender found".
Note: I testing for a File to Idoc Scenario.
Regards,
NithiyanandamHi,
<i> <b>Message is incomplete. No Sender found".</b></i> -- I guess you are not selected the Sender Service,Interface,Namespace and Receiver service in Header section.Before RUN the test configuration you need to check that have you choosen the proper sender and reciver in Header section.
Hope it will helps to you, Check it out the same and try to test the configuration.
Cheers
Veera
Maybe you are looking for
-
Text Prints as Black Instead of Assigned Swatch
Hi, I have been having problems with text printing to a HP laser 5500dn printing as black in stead of the assigned swatch color. I am using CS3 on a Mac. It will print fine exported to PDF or printed on an inkjet. I have reset preferences. In the pri
-
What does this error message mean ?
I put in a CD-R of uncopywritten music. Previously it has come up like any other CD; i.e. iTunes opens and asks me if I want to import the songs. Now for some reason I get an error message that says "You have inserted a disk containing no volumes tha
-
Problem in getting long text in Cash receipt.
Hi all, I want long text in my form print but as a programming i am not getting long text in description Field I am getting short text. So can you please kindly tell me when we entered long text in transaction FBCJ this long text save in which table
-
Hi experts, I'm facing this issue: I created a Z* form for opp print, it works perfectly fine in GUI, but cannot open in PCUI. There's an error like this: "An error exists on this page. Acrobat may not display the page correctly". Any suggestion on t
-
When I get unresponsive script what will happen if I select Don't ask me again
My PC often is running very slowly and it usually seems connected to a "Warning: Unresponsive script". I always select "Stop script" which usually sorts the problem and with no perceptible unwanted results. On the dialog box for the Unresponsive Scri