Runtime Errors: CONVT_OVERFLOW while executing transaction sm66
Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 02.04.2011 00:41:01
Short text
Overflow when converting from "2.90113e+09"
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "2.90113e+09",
an overflow occurred.
There is probably an error in the program
"SAPLTHFB".
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
The main program was "SAPMSM66 ".
In the source code you have the termination point in line 82
of the (Include) program "LTHFBU26".
The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
occurred in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLTHFB "; its source code begins in line
1 of the (Include program "LTHFBU26 ".
Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 02.04.2011 00:41:01
Short text
Overflow when converting from "2.90113e+09"
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "2.90113e+09",
an overflow occurred.
There is probably an error in the program
"SAPLTHFB".
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
The main program was "SAPMSM66 ".
In the source code you have the termination point in line 82
of the (Include) program "LTHFBU26".
The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
occurred in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLTHFB "; its source code begins in line
1 of the (Include program "LTHFBU26 ".
Similar Messages
-
Runtime Error Getting While Executing Transaction ME47.
Hi Exports,
i am facing a problem in transaction ME47 For Maintaing Quotation.
if i enter RFQ Number and exceute, i am getting Runtime Error. This is happening in only in Test Server. Development and production it is working fine.
Error Details are given below.
ShrtText
Screen does not exist
What happened?
Error in ABAP application program.
The current ABAP program "SAPLXM06" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
The program had to be terminated.
Error analysis
Program "SAPLXM06" tried to use screen 0301.
The screen does not exist.
Trigger Location of Runtime Error
Program SAPLXM06
Include MM06EO0C_CUSTSCR1_HEAD_SET_DAT
Row 10
Module type (FUNCTION)
Module Name EXIT_SAPLEINM_013
Source Code Extract
Line SourceCde
1 ----
2 * MODULE CUSTSCR1_HEAD_SET_DATA OUTPUT *
3 ----
4 * ........ *
5 ----
6 MODULE CUSTSCR1_HEAD_SET_DATA OUTPUT.
7
8 PERFORM CUSTSCR1_HEAD_SET_DATA_PBO using fc_call.
9
>>>>> ENDMODULE.
Thanks,
Satheesh.This apepars to be customer code (exit). Have you verified that the programs, objects involved are identical in Test, Dev and Prod? Checked the transport logs to Test?
-
Runtime error "DATA_INCONS_IN_EXIT_MANAGEM" while executing a BADI
Hi Experts,
I am trying to use a BADI in my report Program.
But it is throwing a runtime error "DATA_INCONS_IN_EXIT_MANAGEM".
I debugged the program and found that the call to the GET_INSTANCE method of Class CL_EXITHANDLER is raising this error.
It is because the instance parameter is Initial.
Can you please let me know, what is the mistake i am doing.
My report code is as follows:
*& Report Z_GKR_BADI_01
REPORT z_gkr_badi_01.
CLASS cl_exithandler DEFINITION LOAD.
DATA: l_badi_instance TYPE REF TO zif_ex_gkr_matnrdata, "BADI Interface
mara LIKE mara.
PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY.
START-OF-SELECTION.
CALL METHOD cl_exithandler=>get_instance
EXPORTING
exit_name = 'ZGKR_MATNRDATA' "BADI Definition Name
null_instance_accepted = 'X'
CHANGING
instance = l_badi_instance.
CALL METHOD l_badi_instance->get_materials
EXPORTING
matnr = p_matnr
IMPORTING
mara = mara.
WRITE: /5 mara-matnr,
mara-matkl,
mara-meins.
Cheers
Gaurav RaghavHi lakshmi,
I am new to BADI and i am doing a tutorial.
The Complete Code is given with at the thread starting.
In the Interface method i am retreiving Material details from the table MARA based on MATNR.
The code is as follows:
*& Report Z_GKR_BADI_01
REPORT z_gkr_badi_01.
CLASS cl_exithandler DEFINITION LOAD.
DATA: l_badi_instance TYPE REF TO zif_ex_gkr_matnrdata,
mara LIKE mara.
PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY.
START-OF-SELECTION.
CALL METHOD cl_exithandler=>get_instance
EXPORTING
exit_name = 'ZGKR_MATNRDATA'
null_instance_accepted = 'X'
CHANGING
instance = l_badi_instance.
CALL METHOD l_badi_instance->get_materials
EXPORTING
matnr = p_matnr
IMPORTING
mara = mara.
WRITE: /5 mara-matnr,
mara-matkl,
mara-meins.
Interface Method Implementaion in BADI
METHOD zif_ex_gkr_matnrdata~get_materials.
IF NOT matnr IS INITIAL.
SELECT SINGLE *
FROM mara
INTO mara
WHERE matnr = matnr.
ENDIF.
ENDMETHOD.
I checked and i didn't find the entry in the table mentioned by you.
But isnt the entry supposed to come automatically once i define the BADI.
The BADI Definition name is ZGKR_MATNRDATA.
Please help me regarding the same. -
Error encountered while executing the transform
My message failed at orchestration with the following error. Kindly help in finding the issue.
xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload(df91e55f-c6aa-914d-f042-acdb45bdcaf4)'.
The service instance will remain suspended until administratively resumed or terminated.
If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
InstanceId: cc8fac84-47dc-4d31-be15-80c9f86ffaac
Shape name: CodecoMapping
ShapeId: 32b0a92d-82f7-4b3a-8e22-a94b53bf2804
Exception thrown from: segment 1, progress 22
Inner exception: Error encountered while executing the transform Ibox.UNEDIFACT.CODECO.Orchestration.CodecoMap. Error:Transformation failed..
Exception type: XTransformationFailureException
Source: Microsoft.XLANGs.Engine
Target Site: Void ApplyInMemoryTransform(System.Type, Microsoft.XLANGs.RuntimeTypes.TransformMetaData, System.Object[], System.IO.Stream[])
The following is a stack trace that identifies the location where the exception occured
at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
at Microsoft.XLANGs.Core.Service.ApplyTransform(Type mapRef, Object[] outParams, Object[] inParams)
at Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload.segment1(StopConditions stopOn)
at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
Additional error information:
Exception has been thrown by the target of an invocation.
Exception type: TargetInvocationException
Source: mscorlib
Target Site: System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
The following is a stack trace that identifies the location where the exception occured
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver resolver)
at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, Stream output, XmlResolver resolver)
at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
Additional error information:
Attribute and namespace nodes cannot be added to the parent element after a text, comment, pi, or sub-element node has already been added.
Exception type: XslTransformException
Source: System.Data.SqlXml
Target Site: Void ThrowInvalidStateError(System.Xml.XPath.XPathNodeType)
The following is a stack trace that identifies the location where the exception occured
at System.Xml.Xsl.Runtime.XmlQueryOutput.ThrowInvalidStateError(XPathNodeType constructorType)
at System.Xml.Xsl.Runtime.XmlQueryOutput.ConstructInEnumAttrs(XPathNodeType rootType)
at System.Xml.Xsl.Runtime.XmlQueryOutput.WriteStartAttribute(String prefix, String localName, String ns)
at <xsl:template name="compiler:generated"> (36)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current, Double {http://schemas.microsoft.com/BizTalk/2003/var}var:v237,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v239, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v240, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v242, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v244,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v246, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v248, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v250, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v252,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v255, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v256, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v258, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v259,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v261, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v262, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v264, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v265,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v267, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v268, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v271, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v272,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v281, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v283, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v284, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v286,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v287, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v289, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v290, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v292,
String {http://schemas.microsoft.com/BizTalk/2003/var}var:v295)
at <xsl:template name="compiler:generated"> (12)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
at <xsl:template match="/s2:Root">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
at <xsl:template match="/">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
at Root(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
at Execute(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlSequenceWriter results)
at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer)
at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver documentResolver)Hi,
It is clearly an issue in your map. You can test your map out of Orchestration to make sure it is working.
"Exception has been thrown by the target of an invocation" is a very generic exception. you
need the inner exception to see the actual error. You can also try to test the map in the MapTester tool. It also shows also the inner exception. It's designed for BizTalk 2010 but with the .exe file you maybe also can test BizTalk 2006 maps,.
http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David BaurI finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur -
An unknown error occurred while executing the PowerShell script:
Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name: Microsoft-Windows-PowerShell/Operational
Source: Microsoft-Windows-PowerShell
Date: 4/9/2015 3:27:04 PM
Event ID: 4100
Task Category: Executing Pipeline
Level: Warning
Keywords: None
User: mmmmmm\paufra
Computer: tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
<EventID>4100</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>106</Task>
<Opcode>19</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
<EventRecordID>285</EventRecordID>
<Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
<Execution ProcessID="2344" ThreadID="4076" />
<Channel>Microsoft-Windows-PowerShell/Operational</Channel>
<Computer>tools-francis.mmmmmm.com</Computer>
<Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
<Data Name="ContextInfo"> Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
</Data>
<Data Name="UserData">
</Data>
<Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Receiving the error message while executing the Real Time DTP
Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
RamHi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all... -
[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement
Hi,
i'm trying to delete duplicate records from a table and running following script. this script is triggered from a unix script. it successfully deletes the records but in the last throws following error message,
:[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement:2:Investigation required:
can anybody please help? below is the script.
DECLARE
--CURSOR FOR DUPLICATE ROWS
CURSOR CUR_DUPLICATE_ROWS IS
Select RMS_NOTE_ID, RMS_SUMMARY_NOTE_ID, count(*) cnt from PARTY_NOTE
group by RMS_NOTE_ID,RMS_SUMMARY_NOTE_ID having count(*) > 1;
var_date PARTY_NOTE.PARTY_NOTE_CREATED_DATE%TYPE;
BEGIN
FOR DUPLICATE_ROWS_REC IN CUR_DUPLICATE_ROWS
LOOP
delete from party_note
where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID
and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID
and rowid not in (select max(rowid) from party_note
where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID);
commit;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLERRM);
ROLLBACK;
END;Try this:
delete party_note
where rowid not in (select max(rowid)
from party_note
group by rms_note_id, rms_summary_note_id
commit;No need for cursors and loops.
And when that's completed, consider ALTERing the table to add a unique index (or even a primary key) so you'll never need to do this again. -
I'm installing the SCSM2012 Management Server
component on a SQL dev box. During the installation, the very last step (Import Management Packs) fails with this error:
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
I've already verified that the account I'm logged in with has SA access to the SQL database. Windows 2008 R2 firewall is turned off.....
Has anybody else run into this problem?I don't see anything indicative in the setup log. The setup seems to get all the way to the part where it installs the management packs. Then right after that is when the installation fails and it rolls back.
From the setup log, towards the end:
Property(S): ACTIONSUSER = NETWORK SERVICE
Property(S): ACTIONSDOMAIN = NT AUTHORITY
Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
Property(S): ProductToBeRegistered = 1
MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
=== Logging stopped: 11/7/2011 17:33:22 ===
MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/7/2011 17:33:23 === -
XL reporter error occurred while executing report! Rows: 25203 Columns: 30
An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.Hello pls
follow below procedure
start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
regards
Jenny -
An error occurred while executing a custom action:_PopulateUserRoles
I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this rollAfter this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
These are the steps (I had to create the DWORD 32 bit):
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
On the Edit menu, point to
New, and then click DWORD Value.
Type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type 60000, and then click
OK.
This value represents the time in milliseconds before a service times out.
Restart the computer.
Hope this helps!
BR,
Robert
Robert -
Error occured while executing Matlab script
Hello!
I want to run a Matlab script under LabVIEW, but there is always
a error message which says "Error occured while executing script".
Should I install Matlab on the same computer at first? if yes, do
I need to configure Matlab under LabVIEW?
Thanks!
LeYes No
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705 -
ABAP dump while executing transaction *PC00_M99_CIPE*
Hi,
Getting ABAP dump while executing transaction PC00_M99_CIPE ,hence cannot do payroll posting .
Information on where terminated
Termination occurred in the ABAP program "CL_HRFPM_CD_CLOSING_HANDLER===CP" -
in "GET_FM_POS_CHECK_DATA".
The main program was "RPCIPE00 ".
In the source code you have the termination point in line 13
of the (Include) program "CL_HRFPM_CD_CLOSING_HANDLER===CM00E".
We have recently upgraded our patch level.
SAP_OCS(SPAM/SAINT) SAPKD70026 SAPKD70033
SAP_ABA SAPKA70012 SAPKA70018
SAP_BASIS SAPKB70012 SAPKB70018
PI_BASIS SAPKIPYJ7B SAPKIPYJ7I
SAP_BW SAPKW70012 SAPKW70020
SAP_AP SAPKNA7008 SAPKNA7015
SAP_APPL SAPKH60009 SAPKH60015
SAP_HR SAPKE60028 SAPKE60039
EA-HR SAPKGPHD07 SAPKGPHD26
Kindly guide me.
Regards,
Rachelthanks for the quick response.
By applying note 1137655,problem got resoved.
FORM CHECK_CMTNT_UPDATE_CLOSED
Delta001
Context Block
FORM check_cmtnt_update_closed
USING
u_key_date TYPE begda
CHANGING
c_flg_cmtnt_closed.
Delete Block
DATA ls_encumb_iv TYPE t77hrfpm_encumb.
DATA l_gsval TYPE t77s0-gsval.
DATA ls_fm_pos_key TYPE hrfpm_fm_doc_pos-key_pos.
DATA lx TYPE REF TO cx_hrfpm.
STATICS so_closing_handler TYPE REF TO cl_hrfpm_cd_closing_handler.
CLEAR c_flg_cmtnt_closed .
*--- old switch from note??? active?
*--- if so: use the old logic
cl_hr_t77s0=>read_gsval(
EXPORTING
grpid = 'HRFPM'
semid = 'CHKAC'
IMPORTING
returnvalue = l_gsval ).
TRY.
IF NOT l_gsval IS INITIAL .
TRY.
c_flg_cmtnt_closed = 'X'.
Insert Block
DATA: ls_encumb_iv TYPE t77hrfpm_encumb.
STATICS:
s_gsval TYPE t77s0-gsval,
s_gsval_read TYPE flag.
IF s_gsval_read IS INITIAL .
SELECT SINGLE gsval
FROM t77s0
INTO s_gsval
WHERE grpid = 'HRFPM'
AND semid = 'CHKAC' .
s_gsval_read = 'X'.
ENDIF.
CLEAR c_flg_cmtnt_closed .
TRY.
c_flg_cmtnt_closed = 'X'.
Delta002
Context Block
CATCH
cx_hrfpm_db_operation
cx_hrfpm_ad_customizing .
Delete Block
ENDTRY.
ELSE.
*--- using closed period functionality of PBC
IF so_closing_handler IS INITIAL .
CREATE OBJECT so_closing_handler.
ENDIF.
IF so_closing_handler->consumption_in_closed_period(
i_key_date = u_key_date
is_fm_pos_key = ls_fm_pos_key )
IS INITIAL.
c_flg_cmtnt_closed = 'X'.
ENDIF.
ENDIF.
CATCH cx_hrfpm INTO lx.
lx->raise_sy_message( ).
ENDTRY.
ENDFORM. "check_cmtnt_update_closed
Insert Block
ENDTRY.
ENDFORM. "check_cmtnt_update_closed -
ODBC error occurred while executing SQLExtendedFetch to retrieve the result
Good morning everyone,
I had the following error message while trying to run a simple query in Answers with 3 dimensional columns, 1 fact, and 4 calculated facts...
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1001 code: 0 message: [Oracle][ODBC]Memory allocation error.. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
It's taking around 2,5 minutes to run, then it give that error message.
Has anyone got any ideas on where I should get started?
Update: after 2nd time - it's running fine....I've added a filter...could this be the issue? Too many rows initially?Damon,
you were correct - it was indeed an ODBC issue. Switching to OCI has fixed the issue. This link was also very helpful:
regarding performance
In my case, the problem with OCI happened because I was using System DSN name instead of how it's called in tnsnames. -
Hi All,
I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
"Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
Anybody has an idea about this error? Please help, thank you very much.
The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
EricHI Eric,
I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
SO you can check below mentioned things
1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
again all thing mentioned above is assumption.
YOu can use debugdiag tool to see if memory leak is happening
http://www.microsoft.com/en-in/download/details.aspx?id=26798
Maybe you are looking for
-
Scheduled Report in CUIC Dashboard
Hi, I'm trying to schedule a report to run in a dashboard to use as a wallboard. I have created a schedule to run every 5 mins and a report from Precision Queue Historic report. The dashboard creates fine and populates the data OK fist up but does n
-
Lvm2 on LUKS @ boot time: volume group found but not importing
I have so far succeeded in making ArchLinux boot as far as properly asking for my encrypted partition's passphrase and unlocking the encrypted partition (/dev/sda2) whererein lies the root filesystem; the encrypted partition contains a lvm2 group tha
-
Receiver File content conversion for multi level hireachy
Receiver channel file content conversion.. this is SAP proxy to FIle Scenario, which will get invoice details from SAP along with multiple invoice texts for each invoice. I would like to have below mentioned payload at Target side, <MT_Invoice> <File
-
OWB vs Informatica, Performance
Hi I am working on a Proof of Concept which is looking to replace Informatica with OWB. A key factor to the success of the proof of concept is performance. At present, the OWB mappings seems to be considerably slower, which does not make much sense t
-
HT201210 iphone 5 Restore Error -1
iphone 5 Restore Error -1 Not Update Firmware