Runtime errors - DYNPRO_FIELD_CONVERSION

Dear friends,
what is the Runtime errors - DYNPRO_FIELD_CONVERSION.It is executing by the transaction code PA30,PA48 & users are ECC user (H ids).
How can this error be eliminated.Pls help
Rgds
Amit

Hi Amit,
Such dumps, DYNPRO_FIELD_CONVERSION come usually in case of Module pool programming also. The main reason for this type of dump is the passing of an unacceptable value in a specific varaible or field.
Ex. : As in the case of a Module pool, for a quantity field which does not accept negative values, but if you try to read the values from the databse tables (Sometimes the data may be errenously entered into the table) to the screen, rthe screen field cannot hold the -ve value as it is of the type of the data element quantity as mentioned earlier.
Such errors can be avoided be finding out the error records which exist or by finding the error values which exist in the transaction or the database table.
Hope this is helpful to you. If you need further information, revert back.
Reward all the helpful answers.
Regards
Nagaraj T

Similar Messages

Please help......ABAP Runtime Errors DYNPRO_FIELD_CONVERSION

Hi everyone,
I don't know what's wrong with my code. It says the error in the subject line and it only applies to selected records.
A conversion error occurred.
What happened?
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
What can you do?
Please make a note of the actions and input which caused the error.
Please make a note of the actions and input which caused the error.
To resolve the problem, contact your
SAP system administrator.
Choose "Print" for a hard coopy of the termination message. You can
display and adminster short dump messages using Transaction ST22.
Error analysis
The program flow was interrupted and could not be resumed.
Program "ZADC_PGSPOSTING" tried to display fields on screen 1000. However, an
error occurred while this data was being converted.
How to correct the error
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. Attemting to display
Screen name.............. "ZADC_PGSPOSTING"
              Screen number............ 1000
              Screen field............. "JTAB-GSAMT"
              Error text............... "FX020: Data lost."
Further data:
I don't know why it prompts this error, when in fact I usually pass the "JTAB-GSAMT" field to a variable. Please help me with my problem. I'm having a hard time deciphering it when in fact my program is easy to understand. I must have overlooked something. Thanks so much in advance.
Regards,
Anna

PROCESS BEFORE OUTPUT.
MODULE STATUS_1000.
MODULE get_name.
MODULE get_psgs.
LOOP AT JTAB WITH CONTROL CTRLPSGS CURSOR CTRLPSGS-TOP_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT JTAB.
    MODULE SET_LINE_COUNT.
ENDLOOP.
MODULE EXIT01 AT EXIT-COMMAND.
MODULE USER_COMMAND_1000.
*&      Module GET_NAME OUTPUT
      text
MODULE GET_NAME OUTPUT.
siptot = 0.
data: kostl like pa0001-kostl, H_EMPNO(8) TYPE C.
IF zemp ne itab-pernr.
     move: itab-pernr to zemp.
     move: zemp to itab-pernr.
ELSEIF zemp EQ itab-pernr.
     move: itab-pernr to zemp.
     clear: itab.
     refresh: jtab.
     move: zemp to itab-pernr.
ENDIF.
     clear: kostl.
     SELECT SINGLE * FROM pa0002 WHERE pernr = itab-pernr
                       AND endda = '99991231'.
      IF sy-subrc = 0.
        CONCATENATE: pa0002-nachn ',' INTO itab-name.
        CONCATENATE: itab-name pa0002-vorna INTO itab-name
                     SEPARATED BY SPACE.
      ENDIF.
      SELECT kostl into kostl FROM pa0001 WHERE pernr = itab-pernr
                       AND endda = '99991231'.
      ENDSELECT.
      SELECT ltext into itab-ltext FROM cskt WHERE kostl = kostl
                       AND datbi = '99991231' and spras eq 'EN'.
      ENDSELECT.
      WRITE ITAB-PERNR TO EMPNO.
      shift empno left deleting leading '0'.
SELECT SINGLE * FROM zamc_mstr WHERE pernr = itab-pernr.
IF sy-subrc = 0.
    SELECT sum( diff_sip ) INTO itab-siptot FROM zamc_deduction
        WHERE amc_no = zamc_mstr-amc_no.
    siptot = itab-siptot.
ENDIF.
IF zemp <> '00000000'.
    APPEND itab.
ENDIF.
CLEAR itab.
ENDMODULE.                 " GET_NAME OUTPUT
*&      Module GET_PSGS OUTPUT
      text
MODULE GET_PSGS OUTPUT.
pstot = 0.
gstot = 0.
ectot = 0.
diff = 0.
REFRESH jtab.
SELECT * FROM zppsgsec WHERE pernr = zemp.
    MOVE-CORRESPONDING zppsgsec TO jtab.
    COLLECT jtab.
ENDSELECT.
CLEAR jtab.
SORT jtab BY datum.
LOOP AT jtab.
    pstot = pstot + jtab-psamt.
    gstot = gstot + jtab-gsamt.
    ectot = ectot + jtab-ecamt.
    AT LAST.
      diff = gstot - siptot.
    ENDAT.
ENDLOOP.
By the way, I'm using table viewer to display my results. Thanks.
Regards,
Anna

Runtime error while putting negative value in to table control field

Hi Guys,
              I am working on a Table Control which has Currency
and quantity fields.In PBO when the program is trying put a
negative value then It is going into a runtime error.
The Error description is,
Runtime errors         DYNPRO_FIELD_CONVERSION
                                                                                Error analysis
The program flow was interrupted and could not be resumed.
Program "SAPMZDBPRJCTEDFIG" tried to display fields on screen 0100. However, an
error occurred while this data was being converted.
How to correct the error
A conversion error occurred while the program was trying to   display data on the screen.
The ABAP output field and the screen field may not have the   same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
Screen name.............. "SAPMZDBPRJCTEDFIG"
              Screen number............ 0100
              Screen field............. "ZDB_PROJCTD_FIG-ZWORKDONE"
              Error text............... "FX015: Sign lost."                                 Further data:
I have tried increase the screen field length to more than the ABAP program field length and the scrren field name is of data type which supports signed value.
But still I am getting the error.the error is 'Sign is lost'.
I would appreaciate if you can help me with this.
Correct answer will be rewarded.
Thank you in advance,
Sanujit Acharya

Check The Forum
Re: PA-BN : "FX015: Sign lost." dump
Kanagaraja L

Runtime error in MEQ1

Hi Expert,
Found this error when user was executing MEQ1 to update Quota Arrangement for two Materials while there was no problem for other Materials at this moment. Below is more info. from the error.
1. it comes runtime error: DYNPRO_FIELD_CONVERSION when double click date in t-code: MEQ1
2. Come error
Rdgs,
Emily

Hi Emily
The program termination could be caused by a negative quota quantity (EQUP-QUMNG).
You need to correct the quota-allocated quantities that are incorrect by restructuring the quota arrangement (standard reportRM06Q003, transaction MEQB). This report recalculates the quota
arrangement.
You can run this program only when something has been changed in the quotation and times when original reported issue occurs.
As stated in the system, you should run the report only if nobody is currently processing purchase orders, requisitions, planned orders, production orders, or the quota arrangement in question.
The SAP Note 1521321 should prevent this issue from occurring in the future. It will not correct the issue for Quota Arrangements that already have negative allocated quantities.
I hope this can help.

MIR4 transaction is giving ABAP Runtime Error

Hi Experts,
When I am trying to display the invoice in MIR4 and/or MIRO the system is generating ABAP runtime error. DYNPRO_FIELD_CONVERSION. This is in Version ECC 6.0.
Short text
    Conversion error
What happened?
    The current screen processing action was terminated since a situation
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the curren
    screen.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manag
    termination messages, in particular for long term reference.
Error analysis
    The program has been interrupted and cannot resume.
    Program "SAPLMR1M" attempted to display fields on screen 6310.
    An error occurred during the conversion of this data.
How to correct the error
    There was a conversion error in the output of fields to the screen.
    The formats of the ABAP output field and the screen field may not match.
    Some field types require more space on the screen than in the ABAP
    program. For example, a date output field on the screen requires two
    more characters than the corresponding field in the ABAP program. When
    the date is displayed on the screen, an error occurs resulting in this
    error message.
                  Screen name.............. "SAPLMR1M"
                  Screen number............ 6310
                  Screen field............. "DRSEG-REMNG"
                  Error text............... "FX015: Sign lost."
    Other data:
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Please help us to solve this issue.
Thanks and Regards,
Havina
Edited by: Havina Kutty on May 19, 2009 11:54 AM

Hello,
Please refer
Note 503934 - MIRO: Dump DYNPRO_FIELD_CONVERSION -> field 'REMNG'
Note 445853 - MIR4:more credit memos than invoices for service
Note 393189 - MIRO: Incorrect update of BPMNG -> DYNPRO_FIELD_CONVERSION
Regards,
Ravi

ST22 - Name of runtime error

Hello, i would like to understand the meaning of the following runtime error .. could you please explain me what they mean?
TIME_OUT
OPEN_DATASET_NO_AUTHORITY
MESSAGE_TYPE_X
SYNTAX_ERROR
RAISE_EXCEPTION
ITS_TEMPLATE_NOT_FOUND
RFC_NO_AUTHORITY
DYNPRO_FIELD_CONVERSION
COLLECT_OVERFLOW_TYPE_P
LIST_ILLEGAL_PAGE
CONNE_IMPORT_CONVERSION_ERROR
GETWA_NOT_ASSIGNED
TIME_OUT
UNCAUGHT_EXCEPTION
CALL_FUNCTION_SEND_ERROR
Thanks in advance.

Open the dumps one by one and read all the content.
It shows you What happend? Erro analysis, how to correct? etc.
Regards,
Nick Loy

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

RunTime Error while saving a Sales Order

Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
          select * from (t681-kotab) appending table <cond_tab>
                 up to 1 rows
                 where kappl = se_kappl
                 and   kschl = se_kschl
                 and   datbi >= se_date
                 and   datab <= se_date
                 and   (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
Pavan

Hi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR

hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situat
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the cur
    screen.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT
SourceCde
              message e001(zm) WITH text-335 ltab-kunnr text-334.
            else.
              if ktab-jkunnr <> ltab-kunnr.
                ktab-jkunnr = ltab-kunnr.
                jobsitecode = ltab-kunnr.
                CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                EXPORTING
                  input = jobsitecode
                  IMPORTING
                  output = jobsitecode.
                SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
                IF sy-subrc = 0.
                  ktab-jname1 = kna1-name1.
                  ktab-jstras = kna1-stras.
                ENDIF.
                chg_flg = 'X'.
              endif.
            endif.
          else.
            message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
*          if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
*            message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
*          endif.
          custcode1 = ktab-ckunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = custcode1
            IMPORTING
              output = custcode1.
          jobsitecode1 = ktab-jkunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = jobsitecode1
            IMPORTING
              output = jobsitecode1.
          SELECT SINGLE * FROM knvp
          WHERE kunnr = custcode1
            AND vkorg = vbak-vkorg
            AND vtweg = vbak-vtweg
            AND spart = vbak-spart
            AND parvw = 'WE'
Error analysis
    The program attempted to issue a " " message during "Exit Command"
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT

Hi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"

Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situation
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the current
    screen.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator.
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
How to correct the error
    The program must be modified to correct the error.
    The modification must be made in "Exit Command" processing.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
Source Code Extract
Line SourceCde
    1 *---------------------------------------------------------------------*
    2 *       FORM YVBEP_LESEN                                              *
    3 *---------------------------------------------------------------------*
    4 *       Lesen der Tabelle YVBEP (nicht sortiert)                      *
    5 *---------------------------------------------------------------------*
    6 FORM YVBEP_LESEN USING US_POSNR
    7                        US_ETENR
    8               CHANGING CH_TABIX.
    9
   10   YVBEP = SPACE.
   11   YVBEP-MANDT = VBAK-MANDT.
   12   YVBEP-VBELN = VBAK-VBELN.
   13   YVBEP-POSNR = US_POSNR.
   14   YVBEP-ETENR = US_ETENR.
   15   READ TABLE YVBEP.
   16   IF SY-SUBRC > 0.
   17     MESSAGE E506 WITH US_POSNR US_ETENR.
   18   ENDIF.
>>>>>   CH_TABIX = SY-TABIX.
   20
   21 ENDFORM.
Could you please help on this issue.
Thanks
Srinu

Hi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus

Portal runtime error while selecting page layout in WPC editor

Hello,
in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup.
The logfile shows the following :
#1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#1016#149##n/a##7ff9c93eab6811dfa9c70000003307de#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###10:06_19/08/10_0010_3344350
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: E:
usr
sap
EPD
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.netweaver.bc.util
lib
bc.util.public_api.jar(com/sapportals/wcm/WcmException.java):24: class WcmException is public, should be declared in a file named WcmException.java
(source unavailable)
1 error
I have the same by clicking on "check assignments"
Any help ?
Thanks

Hello Jego.
We faced the same issue after upgrade to EHP1 SP07 last week and managed to solve it by modification of layout.jsp and com.sap.nw.wpc.layoutmanager.LayoutBean within com.sap.nw.wpc.designtime.par. SAP's code requires an additional catch handler, so it is better to rise an OSS message.
As a workaround you may change a default layout for wpc main page (good for new pages) or manually edit output.xml for existing pages.
Best regards,
Aliaksandr Zhukau

Runtime Error when installing Adobe Creative Suite 5.5 Production Premium

I am trying to install Adobe Creative Suite 5.5 Production Premium, but I keep getting a 'Runtime Error!': This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
What should I do? Any help greatly appreciated! I am running Win 7, Service Pack 1, 64 bit.

We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
Mylenium

Runtime error in enhancement spot-' mereq_topline does not exists.'

Hi all,
I have implemented an implicit enhancement spot in ME53n.
When i applied break point in enhancement spot and control goes to ebhancement spot in debugging mode, i got purchse requisition number in mereq_topline.
When i tried to use this structure value in code i get runtime error-
' mereq_topline does not exists.'
Can you please guide how to resolve this runtime error.
thanks.
Edited by: Sanjay_lnt on Sep 20, 2010 8:52 AM

Sanjay,
try to delete the enhancement and recreate it
Thanks
Bala Duvvuri

Runtime errors - DYNPRO_FIELD_CONVERSION

Similar Messages

Maybe you are looking for